Inexpensive Chainsaw Which Is Better And More Reliable

Chainsaw advantages and disadvantages

The main advantage of the chainsaw is not only higher power and performance. :

  • Independence from the presence of power grids and autonomy. It is a self-contained tool that can work in the taiga, forest plantations, gardens and anywhere. Of course, if you have a can of fuel.
  • In rainy weather, in damp places, you do not need to think about electrical safety.

The disadvantages include:

  • Noise power during operation up to 110 decibels.
  • Emission of toxic exhaust gases, making it impossible to work indoors.

A relative disadvantage can be considered a higher price in comparison with a saw of a similar power. The difference can be up to 40%.

Inexpensive Chainsaw Which Is Better And More Reliable

For what tasks is the chainsaw best suited?

A chainsaw is more convenient than a saw for working at a distance of more than 10-20 m from an electrical outlet (one 10 or 20 meter extension cord). It is not always convenient to unwind and rewind extension cords over long distances, even if available. Especially if there is little work.

Also, the chainsaw is appropriate for serious volumes of work, especially with large section wood. In everyday life, this is most often the preparation of firewood.

To work in the wild or at a distance from power grids, a chainsaw without choice is the only option (electric in this case is not a competitor).

Operating cost

This concept includes the cost of energy (consumed electricity and gasoline), consumable parts and repairs.

In practice, the cost of electricity and gasoline for sawing 10 cubic meters. Firewood with approximately the same cutting area is the same.

Cutting headset. bars and chains for electric and chainsaws cost about the same.

The saws also use oil to lubricate the chain and the saw unit. Its consumption and cost in these two types of saws are approximately equal.

An internal combustion engine is a much more complex mechanism than an electric motor. Therefore, it has a higher probability of breakdowns and repair costs.

Pros and cons of the saw

The undoubted advantages include the following points:

  • Always ready to work. There is no need to mix gasoline with oil, store and fill the fuel tank, start by pulling the starter. Work starts at the push of a button.
  • The electric motor runs more stably than the internal combustion engine, which sometimes stalls at idle.
  • Low noise during operation.
  • Ecological cleanliness, no exhaust gases, the ability to work in closed rooms.

The disadvantages of saws are as follows:

  • Working with large hardwoods can be limited by lack of power and RPM.
  • The radius of use is limited by the length of the portable cable.
  • The motor overheats quickly. It should be allowed to cool for about 20 minutes every 40 minutes at medium load. In hot weather. even more often.
  • The need to monitor electrical safety. For example, on construction sites where active work is in progress, the cable may be accidentally damaged.

Some users note that the saw headset fails faster than gasoline saws. In fact, this happens through an oversight of the users themselves. Often they just forget to add oil to the saw headset lubricant reservoir.

With the inevitable refueling of the chainsaw with fuel, oil is added along the way, almost automatically. On saws, it is enough to miss this moment once, and after half an hour of work on the dry groove of the tire, the sprockets and the chain may fail.

When to give preference to a saw

The place of its application, where the chainsaw cannot replace it, is closed rooms. For example, a carpentry workshop.

For workpieces with a larger section, use chain saws.

the saw is better suited for work at off-hours or even during working hours when the roar of the chainsaw is highly undesirable.

Also, an electric chain saw can help when you need to do small (or even one-time) work in the most economical way. The most inexpensive chain saw on the market today costs only 1800 rubles. (The most expensive is about 20 thousand).

Which chain saw is better, gasoline or electric

Electric and gasoline saws have almost the same cutting attachment and operating principle. The saw chain slides along the ellipse of the bar, the wood is cut by sharpened teeth from special alloys. The difference is in the drive. The former are driven by electric motors and consume electricity. Secondly, as a power plant. a two-stroke internal combustion engine running on gasoline. But this difference leads to the fact that these two units differ markedly in their properties in practical work.

The main difference between a chainsaw and a saw

In addition to the difference in energy sources, gasoline and saws have big differences in power characteristics.

The maximum power of chain saws is up to 2.5 kW. It is almost impossible to install a more powerful engine on such saws for the following reasons:

  • the saw becomes heavy and unwieldy.
  • An electric motor with a power of about 5 kW requires a separate powerful cable and connection outlets. When starting, the electric motor, unlike electric stoves and heating elements, takes 3 times the rated power. That is, a 5 kW. 15 kW motor. All wiring and circuit breakers should be designed for this power.

Two-stroke internal combustion engines of powerful models of chainsaws can develop power up to 6 kW.

There is a big difference in speed indicators:

  • An electric motor of 3000 rpm is already considered a high-speed.
  • The number of maximum (for all gas) rpm of the internal combustion engine on different models. from 12,000 to 15,000.

Such a difference in rpm does not mean that the chain on the saw rotates 4-5 times slower than at the maximum of the chainsaw. Low revs are partially cut back by a higher gear ratio than chainsaws.

Therefore, a consumer who has replaced a 1.8 kW chainsaw with a saw of the same power will be disappointed with the weak performance precisely because of the small number of revolutions.

There are fundamental differences in the drive design. Chainsaws have clutches. Therefore, the chain does not rotate when the chainsaw is idling. There are no clutches on the saws. The movement of the chain begins immediately after the soft start button is turned on.

The systems for fastening the bar and chain tension are different. They are keyless on saws. On most models of chainsaws, the tire is tightened in a more proven way, with nuts and a wrench. The tightening force is visually controlled and is more reliable.

The oil pumps for supplying lubricant to the saw head work on the same principle in both versions. Sometimes there are pumps on the saws that are exactly the same as on chainsaws.

There is a difference in the arrangement of mechanisms and the location of the center of gravity. All chainsaw models are thoughtfully balanced for a comfortable grip. As a result, when lifting by the handle, all chainsaws are effortlessly in the working position, the tire or rear part does not hang down.

Holding the saw in your hands requires some effort, just because the location of the cable at the back can be different. It either lies on the ground or dangles and pulls the back of the saw down.

Conclusion: after all, which is better to choose

Based on the above, the conclusions are as follows. A gasoline chain saw is better or just the only option:

  • For work away from power supply.
  • For large and constant workloads, especially with large sections of wood.

Using a saw is more rational:

  • For work in closed spaces.
  • For carpentry construction work with power supply.
  • For the preparation of firewood in small quantities.

The main differences between a chainsaw and a saw, as well as what type of tool to give preference to, are described in this:

Therefore, the choice is made based on the type and specifics of the upcoming work. But it happens that a variety of works with wood are constantly being carried out. And then it is more convenient to have both options in use: gasoline and electric.

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, today the question remains relevant: Which chain saw to choose, gasoline or electric-?

READ  Chainsaw Works Only On Choke Reason

Main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site with no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not stink?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What intensity of use of the tool is expected? Will it be periodic work or daily workload? Will you be able to carry out maintenance on time? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally. what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built-in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace. an electric one.

It should be noted that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw.

Performance

The performance of a saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. Power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable. from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power. even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a single tire. It can make a deeper cut, but a short bar electric saw is faster and less stressful on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier.

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Which is better to choose a chainsaw or a saw

When choosing a device, the question arises: which is better. a chainsaw or a saw. To decide which device to purchase, you should familiarize yourself with the characteristics of both, compare them and choose the one that best suits your individual case for your needs. Only high-quality devices should be purchased.

Performance

The electric version has a lower maximum power. Such saws are not created for sawing a large number of logs, but for work indoors, so they have less productivity. Their indicator rarely exceeds 2.5 kW, and for gasoline options it can reach 5-6 kW.

The number of revolutions made by a chainsaw is 25-30% higher than that of electric saws. The productivity of the tool increases proportionally. In addition, the person with the petrol option is more agile and can easily move around the jobsite without wasting time disconnecting and reconnecting the cable, which also speeds up workflow without wasting additional time.

Chainsaw not only copes with cutting more material, but also more reliable than another option. This product is designed so as not to break from a large number of logs. Manufacturers also take into account more power: the engine is made more wear-resistant, the body is more durable.

However, you can choose less powerful options for gasoline saws, the performance of which will not exceed this indicator for electric ones. Some devices are designed for garden work with small objects: sawing unnecessary branches, thin trees. Such devices, however, have higher performance than electrical devices of equal power.

This is due to design differences. Gasoline options can last longer without overheating. Mains powered electrics must not be turned off for 20 minutes after every 40 minutes of continuous operation so that their motor does not heat up excessively. Many chainsaws are capable of continuous operation for 8 hours or more. You will have to interrupt only to refuel the device with gasoline.

Mobility

The electric saw loses to the gasoline saw in this indicator. For the device to work, you must connect it to the electrical network. Walking away from the outlet will not work; the freedom of movement of the saw will be limited by the length of the cable. To move to another area, you will have to plug the cable into a new outlet located closer to the place where you want to cut. The device, however, has a small mass, women, teenagers can operate it.

The chainsaw is more convenient: it can be easily moved to another location. However, the device is heavier than an electrical device, which makes it less easy and convenient to carry. The petrol-powered version can be used for work in the forest, in large areas where there is no electricity, the ability to connect to the network.

Ease of service

Gasoline saws are more complex. It can be difficult for a beginner to figure out their work on their own. Preparing such a device for operation can be difficult. Electric options are easier: you just need to plug the plug into the outlet.

It is easy to tighten or change the chain on saws: most of the high quality devices are equipped with a special mechanism that makes this process quick and easy even for a beginner. Chainsaw owners have to unscrew the nuts on special clips with a wrench. This makes the design more reliable, but its maintenance takes more time.

READ  How To Check The Ignition Coil On A Husqvarna Chainsaw

You should also store fuel for the chainsaw. It is recommended to mix gasoline and oil every day again: a mixture that has stood for too long deteriorates, its quality deteriorates. It is convenient to do this every morning: one dressing is enough for 40-50 minutes, so it will take a long time to prepare the mixture again, it is inconvenient.

The device may break. Often it is required to replace any parts, components of the mechanism. For gasoline options, spare parts are more expensive. Often only a master can make repairs.

Gasoline options are easier to use. They are designed so that the worker can comfortably hold the tool in his hands. Electric saws are a less comfortable option. Not only the worst balancing of the device itself, but also the long cable will interfere.

Scope of application

When choosing a device, take into account the peculiarities of operation. If you plan to use the equipment at home, where the amount of work will be small, you will not need to saw constantly, using both options is approximately equally convenient.

A gasoline saw is best for gardening. It does not weigh too much, works in various weather conditions, and is mobile. The radius of its movement is not limited. The electro option will be limited by the cable length; in addition, it is unsafe in wet weather, in the morning with dew.

A gasoline saw should also be chosen for work in the forest. There is no possibility to connect a cable, it is necessary to saw a large number of trees, so the electric option will quickly become unusable. In addition, weather conditions may be unfavorable.

For construction work, the electrical option is well suited. If the work is carried out indoors in a small number of rooms, this technique will be more convenient. It works quieter, which will be more convenient for the people around, neighbors. In addition, when using it, exhaust gases will not occur.

Electric saws are most often made for short-term work on construction or summer cottages, for domestic use. If you plan to perform a large amount of work using the device, give preference to gasoline options.

Economy

When deciding which saw to choose, you should also remember about the need to buy gasoline for a chainsaw. As fuel have skyrocketed over the past few years, gasoline-fueled options have become costly.

Buying a chainsaw, however, will be beneficial if you have to use it regularly for a long time, several years: such a device is more durable, but the saw will have to be changed to a new one too often.

Reliability

A chainsaw is a safer device, since there is no risk of electric shock during operation. The electric version cannot be used for work in wet weather, with high indoor humidity. You can get hurt with the cutting part of the appliance with the same probability when using an electric or gasoline saw.

It is important to buy a quality tool. Poor quality equipment can cause injury. This is true for both options.

Quality gasoline saws last longer than electric ones. Since these devices are more powerful, the developers make them more robust. Chainsaws are wear-resistant, created taking into account heavy loads, suitable for long-term work. Mechanical damage to these devices is less likely than breakage of saws.

The service life depends on the quality of the device, compliance with the rules of its operation: if you do not take care of the tool, the probability of breakage will increase for both options.

The cost

The cost of an electric appliance will be much less than that of a petrol-powered one. The price difference is due to the simplicity of such a device. For its manufacture, the use of expensive materials is not required, and there is also no need for a large number of different parts. In addition, due to the smaller dimensions of the saw, less raw material is required for its manufacture. If a person plans to use the tool infrequently, an electric one will become a more economical option.

A gasoline powered device is better suited for long-term operation. Chainsaws are more durable, so for regular use they are better suited: the device will not break often, it does not need to be constantly replaced.

It is recommended to buy only good quality products. This will save the sawer from injury, prevent the need to replace or repair damaged tools too quickly.

Reviews

Gennady, 38 years old, Barnaul: “We bought a chainsaw for work at a summer cottage: my wife grows fruit trees, sometimes branches need to be sawed off, sometimes an old dead tree must be removed. Since the site is rather large, work sometimes has to be done at high humidity, dew, the electric option did not fit.

The chainsaw does a good job, cuts quickly. It took a while to learn how to use it. Since we don’t use the saw too much, the fuel costs are not too high. The main disadvantage is noise during operation and unpleasant smelling harmful exhaust “.

Anton, 34 years old, Anapa: “When I started repairing a summer residence, I bought an electric saw. I had no experience in carrying out repair work using this device, but I figured it out quickly. The device works quietly, saws quickly enough. Only a long cable is inconvenient: it often impedes movement “.

Dmitry, 43 years old, Chelyabinsk: “I use a chainsaw at work: I harvest wood. The device is of high quality, rarely breaks down, works quickly and efficiently. I also think that the technology does not interfere with movement: it is easy to change the location when needed “.

Chainsaw

This type of instrument is widespread. It is driven by an internal combustion engine, which is connected to a saw chain (how to sharpen. here). This is a simple classic mechanism that, due to its simple device, has a high reliability factor.

The following classes are presented on the consumer market:

  • Household. These are chainsaws that are designed to work from time to time. They have low power, light weight and compact dimensions (mini chainsaws). It is convenient to use such a unit, for example, for preparing firewood for a fireplace. Their functionality is usually limited. It is optimal to use household chainsaws no more than 20 hours a month.
  • Semi-professional. These saws have significantly more options. They are used in a variety of jobs, from repairs to felling. Possessing sufficient power, they cannot be operated for 8-10 hours a day, such active use can lead to breakdown. Their optimal use is in the form of a delimber for felling.
  • Professional. This type of tool is most often used for felling wood. Chainsaws are powerful and functional. They can be operated without interruption for a long time (up to 16 hours a day).

Advantages:

  • Independent from power supply.
  • Can work in all environmental conditions.
  • High power of professional and semi-professional chainsaws, which significantly exceeds any options for an electric tool.
  • The possibility of continuous work.
  • Reliability and long service life.

Disadvantages:

  • Significant weight.
  • Emission of exhaust gases that are harmful to humans and the environment.
  • High noise level.
  • Substantial vibration that complicates the operator’s task.
  • Need to refuel.

In severe frosts, starting a gasoline unit becomes much more difficult.

Comparative characteristics

In the consumer market, saws and chainsaws are provided in a wide range. Each representative of this kind of instrument has their advantages and disadvantages. Therefore, the choice of a saw must be approached responsibly. It is optimal to consider the pros and cons of saws for specific characteristics:

  • Mobility. In this category, the advantage of a chainsaw is undeniable, which, unlike a power tool, does not require a connection to a power source. Even if the saw is purchased for household use, the cord can become a serious obstacle to the area. Whereas the chainsaw can be safely put in the car for a trip to the forest or fishing.
  • Power. a saw is a tool that does not carry heavy loads. It can be used to cut branches or cut a board, but this saw will not work for denser materials and heavy loads. Working too hard may cause the tool motor to break and overheat or break.

Household chainsaws also do not have too much power, but manufacturers for long and strenuous work create more durable professional or semi-professional tools.

If the work of the master involves cutting thick and dense wooden materials, then it is optimal to use a chainsaw. And for a construction site, in the process of which they work with thin boards, it is more convenient to use a saw that has greater accuracy.

READ  How To Rivet A Chainsaw Chain At Home

When choosing the saw power, it is better to provide some margin. This will smooth out current instability during operation.

  • Duration of work. In the recommendations for the operation of the saw, the manufacturers indicate the need not to exceed the loading period of 20 minutes. After this time, the engine must cool down. Whereas chainsaws can work continuously for 8 hours.

Many saws are equipped with a thermal control system that shuts down the tool if it overheats.

    Ambient conditions. For the electric version of the tool, there are restrictions on the permissible level of humidity.

In this you will see a comparison of a chainsaw and a saw.

When is it necessary to give preference to a saw?

Based on the advantages and disadvantages of the two types of tools, the user should give preference to the saw if:

  • There is enough wire length in the place of work and the wiring allows you to withstand the load.
  • The scope of work is not too large.
  • Works are carried out indoors.
  • It is important to maintain a certain noise level.
  • It is important for the user to maintain environmental safety.

And with the circular sawmill, it is easy to cut any lumber.

Read about how to make your own angular circular sawmill in our article.

Every professional builder and home craftsman should approach the choice of a saw responsibly. Indeed, for a certain type of work, both a saw and a chainsaw can be the ideal solution. Such tools are actively used for logging, clearing forest debris, they also cut ice and concrete.

Saws are often used for domestic purposes: to cut or remove a tree, saw wood or cut boards. The article contains materials that will help you make the right choice depending on the purpose and conditions of use. Also, it will be useful to study our rating of the best chainsaws.

saw

a saw is a unit that combines the functionality of a chainsaw and the advantages of a power tool. The rotation of the chain is provided by a gearbox associated with an electric motor. Modern models provide automatic lubrication of the saw headset. A relay is also used to protect the motor from overheating during intensive work.

One of the most important parameters of the saw is the engine power, on which the performance of the unit depends.

The risk of kickback when working with a saw is significantly lower than with a chainsaw. This ensures greater safety for human health and life.

Advantages:

  • Light weight and compact dimensions.
  • No exhaust fumes.
  • Ease of use.
  • Low cost.
  • Low noise level.
  • Easy start.
  • Energy efficiency.
  • Sustainability.
  • Low vibration.

Disadvantages :

  • Power Source Dependence.
  • Afraid of high humidity and precipitation.
  • The need for regular breaks every 15-20 minutes.
  • Low working life and functionality.

The power tool requires a high-quality mains supply. Otherwise, voltage dips can become not only an obstacle to the planned work, but also cause the saw to break.

Differences in work

The device and principle of operation of a chainsaw and a saw are similar. The main difference between the tools is the type of engine. An electric motor transmits rotary motion through a gearbox or direct drive to a sprocket that drives the bar and chain. For a chainsaw, a two-stroke internal combustion engine powered by a fuel mixture is used.

The autonomy of the chainsaw allows you to use it away from the power source. This is very useful for felling work or for trimming trees in city parks. saws are tied to current, without which they will not be able to perform their tasks, therefore they are more often used for cutting beams or sawing firewood.

When should a user choose a chainsaw?

In some cases, the advantages of a chainsaw outweigh the advantages of an electric tool version. The choice in favor of a chainsaw must be made if:

  • No power supply or wiring is not reliable enough for high loads.
  • High power required to handle large volume or high density materials.

Before choosing a tool, it is necessary to determine the intensity of work, what material needs to be cut and the ability to connect to a power source. These three factors will help you make the right decision.

Thus, the choice of tool must be linked to the work ahead. It is optimal to choose a saw when the amount of work to be done is not too large and it is possible to connect the unit to the mains. Also, this unit is indispensable when working in closed rooms. For professional purposes and long-term operation, the chainsaw is an indispensable tool.

Which is better. a saw or a chainsaw?

When choosing a chain saw, the type of its engine plays a major role. Many factors directly depend on this, including the efficiency and performance of the tool in certain weather conditions. That is why, before buying a saw, you need to weigh the pros and cons of each individual type of power unit.

Which saw is better. gasoline or electric?

To find out which chain tool is best for each user, a petrol or a saw. You need to compare them with each other. For this, several important criteria must be used:

  • Operating areas. both gasoline and electric saws are designed for garden maintenance. However, models with factory electric motors are powered by a home network, so their area of ​​operation is largely limited by the length of the standard cable. To fix this problem, users connect the instrument to the mains using an extension cord. Chainsaws can be used anywhere, including away from home. However, unlike power tools, they cannot be operated indoors, since during operation, gasoline internal combustion engines emit exhaust gases that are harmful to health;
  • Technical characteristics. gasoline saws are powerful and more durable. They can be used with confidence for felling large trees, cutting large dry branches and harvesting significant amounts of wood fuel. saws, on the contrary, are used only for solving simple economic tasks: removing wild bushes and small branches of fruit trees, sawing boards and caring for bushes;
  • Ease of Operation. The correct operation of your chainsaw depends on proper use and maintenance of the tool. To do this, the operator must regularly adjust and flush the carburetor, the gap in the ignition system, inspect and change the spark plug, check and replace the filters, and also properly prepare the fuel mixture, strictly adhering to the proportion indicated by the manufacturer of the equipment. With saws, everything is much easier. All the user needs is to monitor the amount of oil for lubricating the chain, and also to sharpen the chain in a timely manner;
  • Noise and Vibration. The vibration and sound load generated by the saw are not as significant when compared to a gasoline-powered chain tool. This allows the use of models with electric motors for women and elderly people.

Having studied these factors, it can be argued that gasoline saws are suitable for solving the most difficult tasks on large garden plots. They are easier to operate by users who have sufficient experience in working with this type of equipment. saws will help you maintain small areas. They can be used during renovation or construction. Even inexperienced users can confidently handle the operation of electric chainsaws.

Which is safer. a chainsaw or a saw?

The answer to this question is possible only taking into account the design features of the garden tool. Gasoline or electric saw. they differ in the set of components and materials from which they are made. Gasoline ICE technology is assembled mainly from metal parts that can withstand high heat and continuous friction. This makes gasoline saws more reliable and durable.

Modern saws are most often assembled from plastic components, which are also able to withstand intense work in difficult operating conditions. However, regular use of saws under maximum permissible loads will result in serious breakdown of important working parts of the equipment.

Today, their brand manufacturer will tell about the reliability of gasoline or saws. The most popular among professionals are models from Stihl, Husqvarna, Makita and Al-Ko. They are much more reliable than their Chinese and Korean counterparts. For beginners, budget, but no less reliable electric and chainsaws of the Champion, Partner, Patriot and Homelite brands are suitable.