Milwaukee Sawzall Blades – Ax and Torch. Reciprocating saw blade handle
Milwaukee Sawzall Blades – Ax and Torch
When trying to determine who makes the best corded reciprocating saw you need good blades. If you remember back to your days in science class, the goal of any good experiment is to control as many variables as possible. Then, only what you want to test actually varies. We first needed to set up a system that would put each saw through a variety of tests. Those tests reflected what each blade could perform. We knew we needed a blade that would cut through nail-embedded wood. We needed another that could handle steel and PVC. With lots of available options, we settled on the Milwaukee Ax and Torch reciprocating SawZall blades.
Editor’s Note: We got to check out Milwaukee SawZall blade manufacturing in Greenwood. Check out that article for a cool behind-the-scenes look!
Why Milwaukee Sawzall Blades?
There is some confusion out there about recip saw blades. Many folks think that because a tool has a branded name, like the Milwaukee Sawzall, you can only use that blade brand. This isn’t true. Recip saw blades fit in any of the major manufacturer’s saws giving you the option to choose both the saw you think is the best and pair it with the blade that you prefer.
Several thoughts went into deciding on Milwaukee Sawzall blades for our test. Two, in particular, stood out to me. First, Milwaukee is constantly innovating within its company. “Disruptive Innovation” is part of their corporate culture. In fact, t’s nearly impossible to talk to someone at Milwaukee without hearing that term. Second, Milwaukee invented the reciprocating saw. When you’re the one to design anything from the beginning, you are intimately knowledgeable about it. We counted on this combination of innovation and knowledge to produce the best blade for our testing… and we weren’t disappointed.
Editor’s Note: Check out our best SawZall blade article for our top picks.
The Milwaukee Ax Sawzall Blade
As the name would imply, the Ax is designed for wood cutting duties. In our testing, we used nail-embedded wood, which this blade is designed to deal with.
Of the Milwaukee Sawzall blades, the aggressive Ax, with its Fang Tip seems the most aggressive. This tip bites into the wood on contact instead of bouncing up or sliding with the motion and/or vibration of the recip saw. I say “or” vibration because a couple of the saws we tested, including the Milwaukee Sawzall, had very little vibration at all.
A Nail Guard design prevents most nails that you will encounter from slipping between the teeth and causing damage. The blade is thicker to better resist bending and fracturing for greater durability. Also, its 1-inch height helps keep the Milwaukee Sawzall blades more rigid. This makes for straight and accurate cuts. Finishing off the durability features are the Matrix II bi-metal teeth.
The Sawzall Ax Blade is available in either 6-inch, 9-inch, or 12-inch lengths. They feature a 5 TPI design (teeth per inch). They are sold in packs of 5 or in bulk packs of 25 or 100.
The Torch with Double Duty Upgrade
With a name reminiscent of a cutting torch, the Double Duty Torch blades were our metal cutting Sawzall blade of choice. We used the Torch to cut through steel pipes, a U-shaped unistrut piece, and PVC.
The Torch Sawzall Blades have an optimized tooth design that increases the lifespan up to twice the previous generation. Tough Neck ribs strengthen the tang of the blade to improve durability where it is shorter and therefore weaker. The Grid Iron honeycomb pattern increases the rigidity to help keep the blade from buckling.
Double Duty Torch blades are available in lengths of 6″, 9″, or 12″. Tooth options include 10, 14, 18, and 24 TPI. Like the Ax Sawzall blades, these are available in packs of 5 or bulk packages of 25 or 100 blades.
How Did the Sawzall Blades Perform?
We put each recip saw through 12 inches of nail-embedded wood with the Ax. The Torch was used to cut 4 pieces of PVC pipe followed by that U-shaped unistrut beam. In a separate test, the Torch blade had to make it through 5 steel pipes.
The greatest compliment that we can offer for both the Double Duty Torch and Ax Sawzall Blades is that we didn’t have to think about them during the shootout. We had plenty of spare blades on hand in case they failed during the test for any reason, but that never happened. The blades performed flawlessly, resisting buckling and we experienced no breakage. Even cutting through 5 steel pipes rapidly, there was no noticeable decrease in performance due to dulling or breaking of the teeth.
Considering not only the tasks we required of each blade but also the Rapid speed in which we abused them, I came away very impressed. The next time you’re standing in your local Home Depot staring at the multitude of recip saw blades available, don’t hesitate when you see the red packaging of the Milwaukee Sawzall Blades.
Reciprocating Saw Blades
Reciprocating saw blades are a type of cutting tool used for a variety of different jobs. They are designed to cut through materials like wood, metal, and concrete, making them an essential part of any construction or industrial project. Reciprocating saw blades come in a variety of sizes and styles, allowing users to choose the best blade for their particular job.
Types of Reciprocating Saw Blades
There are many different types of reciprocating saw blades available on the market today. From 12 inch reciprocating saw blades to 36 inch sawzall blades, each type is designed to handle specific tasks with varying degrees of success. Bi-metal reciprocating saw blades can handle tougher materials like metal while carbide reciprocating saw blades can be used for more delicate projects such as concrete cutting. Fine tooth reciprocating saw blades are also available for woodcutting applications.
How Reciprocating Saw Blades are Made
Reciprocating saw blades consist of several key components that make them effective tools for a wide range of applications. These components include high-grade steel alloy teeth that help cut through tough materials, heat treatment processes that ensure long-lasting performance, and special coating techniques that protect the blade from rusting or corrosion.
Industries That Use Reciprocating Saw Blades
Reciprocating saws and their corresponding blades have become popular tools in many industries due to their versatility and effectiveness at cutting through tough materials. Professionals in fields such as carpentry, plumbing, electrical work, and automotive repair often rely on these powerful tools when completing projects.
Find the Reciprocating Saw Blades You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of Reciprocating Saw Blades along with other tools or equipment to ensure you have all you need to tackle the job, especially if you’re taking on a DIY project for the first time.
Plus, when you shop at Zoro, you’ll always enjoy competitive on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over 50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.
Reciprocating Saw Pruning Blade – How to Choose the Most Suitable
It does not matter if you are a seasoned professional or a lowkey DIYer.
Your knowledge ranges from selecting, operating, and maintaining it. When it comes to reciprocating saw pruning blades, it’s not just about pruning flowers or the landscape right? Well, it is certainly more than that. The various types you can choose from ranges depend on their applications. Be it wood, metals, PVC piping, and bushes. There is always a specialized blade.
So knowing all there is about your reciprocating saw pruning blade is key to getting the most out of it.
Chapter 1: What are the Reciprocating Saw Pruning Blade and its Type?
You have a Reciprocating saw. It is an essential tool to have because it cuts through anything, sometimes it is called “Demolition Saw” as it cuts through any material, hard and tough.
However, with the ranges of things it can cut through, you can not do it without a blade. No matter how expensive the reciprocating saw is, there is no good blade, and it is useless. Its blades are reciprocating saw blades. The reciprocating saw trim blade can also have a rubber handle. And it can be trimmed without a reciprocating saw.
Generally, there are two types of reciprocating saw blades: The toothed blades and the abrasive blades. They both serve different functions. Toothed blades can cut through soft materials, like wood and plastic, which makes it your ideal blade for pruning whereas. The abrasive blades grind through hard materials like stones, concrete.
However, finding the best blades for pruning trees does not end with just choosing a toothed blade reciprocating saw pruning blades. It also includes you doing blades attribute comparison. These attributes include size, coating, and more.
So when picking a reciprocating saw pruning blade, choose a specialty blade that has deep gullets and with a tooth configuration that allows it to cuts on both push and pulls strokes. This property allows the pruning blade to leave a clean cut in greenwood.
However, choosing is not something you master in a day. You only become good at it by constantly doing it.
Chapter 3 : Why Reciprocating Saw Pruning Blade Best Suited to Trim?
Pruning or cutting trees is some easier task than cutting metals or other materials. There are various other pruning tools you can work with, but none offers the top quality level of the reciprocating saw pruning blade.
Sometimes, it’s not always about you just finding any pruning tools. It is about you getting the right one that fulfills your tasks to with the quality you so desired.
It is why you need the reciprocating saw pruning blade. It allows you to cut through thicker tree branches with very little effort, unlike any other pruning blades.
There is another factor that makes a reciprocating saw pruning blade ideal. It should allow you to cut on both push and pull stroke. It should be quite efficient that other pruning tools and allows you to get the job done in lesser time.
For clean wood cutting, your choice of reciprocating saw pruning blade should have the most aggressive TPI. It could be as low as three teeth per inch. It comes with an aggressive tooth geometry that allows you to go through wood quicker than any other blade.
Also, it is very helpful when trimming shrubs. However, when working on nail-embedded wood, ensure that the reciprocating saw trim blade has a 5-7 TPI. It ensures that the nail does not enter the groove that can tear the blade teeth.
Another ideal factor that makes reciprocating saw pruning blade good for pruning is its length. Long blades can trim trees or cut wood for easier landscaping.
Chapter 5 :Why You Should Buy From Us?
We are trailblazers in the saw blades industry. And provide a full range line of reciprocating saw pruning blades each allowing you to prune trees, trim bushes, and shrubs.
Our reciprocating saw pruning blades are specially designed and configured for specific pruning purposes. It provides greater flexibility, durability, and performance than many other pruning tools. These disruptive reciprocating saw pruning blades makes a seasoned pro achieve more productive results and non-pro achieve desirable results.
None of your pruning tasks is too big, all you require is a reciprocating saw. over, you can get a high-quality reciprocating saw pruning blades from us.
With our competence, we can provide a demanding market with high-performance reciprocating saw pruning blades that are far more productive and superior to many others.
Contact us today and let us know how to choose the right product for you.
Summary :
By now, you should be wary of the various tools available for pruning tasks.
If you are to pick a reciprocating saw pruning blade that is durable, flexible, and efficient, you need to consider factors like blade material.
While shopping for a reciprocating saw pruning blade, take your time and choose well.
However, to get quality reciprocating saw pruning blades that allow you to get the most of it and are affordable, please contact us.Let us make your pruning dreams come true.
The Various Parts Of A Reciprocating Saw Explained!
Not all of the parts in this guide may be present on your reciprocating saw; it depends on the type of saw you have and the features it comes with. Corded saws don’t come with battery packs, to give an example.
When it comes right down to the basic parts, though, different types of reciprocating saws will have the same basic parts such that you can switch between them and learn how to use them in no time at all.
The Blade
The blade is the business end of a reciprocating saw and the reason why it’s such a versatile cutting tool in the first place. You have a material you need to cut?
Chances are, there’s a reciprocating saw blade for that.
For regular sized reciprocating saws, most of the blades on the market come anywhere from as short as two inches to as long as 12 inches.
General purpose demolition blades and blades meant for fast wood cutting are the longest ones you will usually find, and these are available at 6 inch or 12-inch lengths. They have coarse teeth with a low teeth-per-inch (TPI) count, which makes them ideal for rough cutting.
Metal cutting blades, on the other hand, are generally on the shorter side. You can find them in the market in lengths as short as 2-3/4 inches to as long as 6 inches.
They have medium to fine teeth, and they also often come in variants that combine carbide tips or carbide coated teeth with steel or alloy for longer cutting life.
Finally, some reciprocating saw blades don’t come with teeth at all. These blades grind instead of rip into the material with the help of carbide-based abrasive grit coatings, or the more expensive diamond grit ones.
Blade Clamp
Reciprocating saws that require tools to change the blade will usually have a blade clamp assembly to securely hold the blade. To change a blade on a reciprocating saw with a blade clamp, first you need to loosen or remove a set screw using a screwdriver or an Allen wrench.
This releases the blade clamp, along with the blade, so you can remove them from the reciprocating shaft. To install a new blade, insert the blade shank from the front between the reciprocating shaft and the blade clamp, put the set screw back in the hole and retighten securely.
Blade Collet or Blade Holder
Reciprocating saws that come with a blade holder or blade collet lets you change blades without the need for tools. Most of them work similarly to the chuck of a drill. To fit a blade to a blade collet, rotate the collet counterclockwise to loosen the chuck.
Then insert the blade into the blade collet. Some models are spring loaded, so you only need to release the collet to secure the blade. Others require you to retighten the collet by rotating it clockwise. In any case, check that the blade is secure by giving it a tug or two.
Blade Pressure Plate
Blade pressure plates secure the blade to the reciprocating shaft between two plates and at least two nuts. You may find these usually on pneumatic reciprocating saws made for industrial cutting.
You need to disassemble and reassemble the bolts and nuts of the pressure plate to change your blades, but once you tighten everything up, that blade is as secure as it gets.
Blade Guard or Shoe
The shoe of the reciprocating saw does more than just help protect your hands from the blade. You can also use them as a leverage point to start plunge cuts.
If you have a tool with an adjustable shoe, you can also use the show to adjust the depth of cut. You can also use it help even out the rate of wear on your blade by setting it forward or backward depending on which part of the blade you want to use more.
Blade Guard / Shoe Locking Button or Lever
Reciprocating saws with adjustable shoes may come with a button or lever that you can press or release to unlock or lock the shoe in place. If your saw doesn’t come with one, you may have a fixed shoe, or you may need tools to adjust it.
Brush Cap
Some reciprocating saw makers use brush caps to give owners access to the carbon brushes on their tools. Most saws that have them will usually have one on either side.
Loosen the brush cap to remove the cap and the worn-out brush. To replace them, simply put the new brush and brush cap in the opening and retighten.
Cordless Tool Battery Pack
A cordless reciprocating saw will come with a battery pack, which is usually mounted on the back of the tool or at the bottom of the handle. To detach the battery, find the battery button and press it as you gently pull the battery off.
Dust Shroud and Extraction Tube
Some reciprocating saw models come with dust extraction features, which is usually in the form of a dust shroud that covers the muzzle of the tool.
These shrouds also come with an extraction tube that you can connect to a vacuum so that all dust and debris are sucked away from the front of the tool.
Electrical Cord
Corded reciprocating saws will, of course, come with an electrical cord that you need to plug into an outlet. Some models come with removable electrical cords that you can detach from the tool to facilitate storage and transport.
Hand Grip
Regular size reciprocating saws will usually come with a hand grip just behind the blade guard or muzzle of the tool. These help you hold the tool securely with two hands, while also giving you plenty of grip. You will not usually find a hand grip on compact reciprocating saws designed for one-handed use.
Handle (Rear)
The rear handle of a reciprocating saw usually comes in the form of a D handle or a pistol grip, to give you access to the power trigger and the lock-on switch. The battery packs on the cordless models usually go on the bottom of the handle. Compact reciprocating saws usually come with just the pistol grip.
Lock-on Button
The lock-on button is usually located just above the trigger switch. Pressing this button lets you run the reciprocating saw at its current speed even if you let go of the trigger switch, which can be handy for longer cuts or for cuts that require consistent speed.
Orbital Action Selector (Wheel or Lever)
The orbital action selector lets you select the orbital action setting of the reciprocating saw. Turning on orbital action causes the tool to move the blade in an upwards and downwards motion, in addition to forward and backward.
The tip of the blade follows a semi-elliptical path, hence the name of the feature.
Turning on the orbital action makes the reciprocating saw cut more aggressively, and it also lengthens the stroke length, too. This can significantly speed up rough cutting tasks, especially if you are working with wood or softer materials.
For cutting into metal or ceramic, it’s best to turn the orbital action off.
Speed Range Selector (Wheel or Lever)
The speed range selector is usually placed near the handle. Choosing a speed with the selector sets a maximum speed that the tool will reach, and it will not exceed that speed even if you press the trigger switch all the way inwards.
This can be handy for ensuring that you are doing a slow cut on metal, where overheating the blade can be an issue.
Trigger Switch
Pressing the trigger switch turns the reciprocating saw on, and releasing it turns the tool off.
Aside from turning on the tool, the trigger switch also acts as a variable speed control for the tool – the deeper you press it inward, the faster the tool runs, up to the limit set by the speed range selector.
Electric reciprocating saws usually have the switch inside the rear handle of the tool, while some small pneumatic models have a clip-style switch on top of the tool instead.
Vents
The vents on the side of the tool ensure that the motor can safely circulate heat outside. Make sure that you don’t cover the vents while the tool is in use, to avoid potentially overheating the tool.
Also, check the vent from time to time to see if sparks or burnt odor is coming out of them – these can be signs that you need to change the motor brushes, or you need to lubricate the tool.