Mow With A Trimmer In The Rain
Country notes Safety when working with a grass trimmer. How to properly mow lawns, slopes, tall grass with a trimmer. We clean and store petrol and
Slope handling
The slope is also processed according to the principle of “cut grass to the left”, choosing the direction so that its top is on the right. Having reached the end of the section, they return to the starting point, rise higher by the width of the stroke and mow the next strip.
Pruning
It is convenient to cut flower beds, lawns and paths along the edges with a trimmer with a lower engine, since its cutting plane can be placed vertically. For an even greater effect on the cutting line, it is useful to dig a groove of about 4×4 cm. Then the line will cut the grass below ground level without touching its surface. The result is a very clean, blemish-free vertical haircut.
Can wet grass be cut with a trimmer and lawn mower and how do I do it?
Arrangement of a suburban area (and even a local area in a city) is a very difficult matter. Especially because you have to look after the farm all the time. Many people also have questions about how to do this or that work, for example, is it possible to mow wet grass with a trimmer.
Features of the situation
Of course, such a question will not arise for those who live in the immediate vicinity of the lawn. Then you can wait a while and work when the grass dries up. But the need to remove wet grass arises immediately, if you can visit the site only occasionally. What to do if you have to mow the lawn on weekends, on another day with rainy weather, that’s the subtlety. The opinions of the summer residents themselves differ, therefore it makes little sense to be guided by their position. You need to figure out the nuances yourself.
The role of equipment
It should be pointed out at the outset that there are two main types of trimmers that “relate” differently to wet vegetation. Some devices are equipped with a gasoline engine, others are set in motion by connecting to the mains or installing a battery. In turn, the trimmer is divided into two subgroups: with the location of the motor in the lower or upper part of the apparatus. Safe enough for the user to remove wet grass can only be gasoline trimmers or hand scythes.
In this case, it is strongly undesirable to use an electric lawn mower. Sometimes you can find statements that this requirement applies only to devices with a lower motor placement. Such an electric motor comes into direct contact with water. Because of this contact, you can be afraid of a short circuit.
If water does get inside the power plant, there is a risk not only of a short circuit, but also of an electric shock. It is worth noting that these restrictions apply not only to trimmers, but also to full-fledged lawn mowers. The assurances of manufacturers and marketers about safety should not be taken into account. To minimize the risk to yourself and your equipment, you should use a lawn mower. But there are a few more subtleties that must be taken into account.
Even if the mower does not fail and its owner is not electrocuted (let’s say such a favorable situation for a minute), you still cannot mow wet grass with a trimmer. This is a deliberately abnormal mode of operation, due to which the equipment wears out too quickly. Wet vegetation is much more resistant to cutting elements than it should be. Therefore, even very well insulated motors are overloaded.
Due to the sticking of wet grass to the knives and to the spindle, the load on them will necessarily increase. This cannot be avoided, and no skill of mowers, no methods and schemes of lawn clearing help. Not only the motor suffers, but also the shaft, which sometimes turns.
Problems when mowing wet grass can also arise with gasoline machines. Yes, they are more powerful than their electrical counterparts, but the load still exceeds normal values. First of all, piston pairs and other moving parts are “under attack”. If there is no way out other than using a gasoline mower, you need to take care of it. When mowing raw grass, the machine is periodically switched to idle mode without load. 30 seconds is enough to remove excess heat, as well as save the trimmer resource.
And more about different situations
When talking about mowing wet grass, you need to distinguish between the following possible situations:
- It is wet after rain;
- It is raining;
- The reason for the moisture is a damp area (lowland or groundwater).
In the first case, it is quite possible to take a chance and try to put things in order with a lawn mower. In the second, mowing is impractical. In the third, you will first have to solve something with moisture and only then put the lawn or lawn in order. If you often have to mow wet grass after rain or “through dew” in a small area, then it is better to use not a trimmer, and not a lawn mower, but a simple hand scythe. You need to look not only at the grass that is being removed, but also at the one where the power cable is placed.
Moisturizing it can be a very serious risk factor. To mow the grass after rain, you need to wait a little. A few minutes, even with a very big rush, will not noticeably reduce the time that can be set aside for mowing.
As for mowing raw grass, there are still the following objections to it:
- It is more difficult to walk with a trimmer or lawn mower in such conditions, you can easily fall and get injured;
- You will have to spend more time on work;
- After mowing, it will be necessary to thoroughly clean the machine itself;
- Wet chlorophyll will leave more stains on clothes, leather, shoes.
Now you need to figure out exactly how to act if you still decide to use a gasoline trimmer to clean your lawn or lawn in wet weather. An important rule is to keep the grass at the optimum length. By overly shortening it, especially in the summer, summer residents run the risk of provoking early drying of plants. It is unlikely that this will contribute to a good appearance.
Sure, wear durable, waterproof footwear. Use headphones or earplugs only when working with a two-stroke petrol trimmer. On a large clearing with flat grass, mowing is carried out along imaginary squares, conventionally dividing the entire territory into them. They first move along the perimeter of each square, then mow it from the inside and move on to the next part of the lawn. Regardless of the weather, before starting work, you should do the following:
- Check the serviceability of the equipment;
- Remove all debris and foreign objects from the site;
- Replace, if necessary, worn cutting elements;
- Are determined with the direction of the mowing so that the lawn does not resemble a “washboard”.
For how to cut wet grass with a trimmer and lawn mower, see the following
What trimmers can you cut wet grass
To understand which trimmers can be used to mow wet grass, and which not, you should understand their device. Today the consumer has two main types of lawn mowers:
- Gasoline;
- Electrical.
Trim tabs, depending on the location of the engine, can be:
- Top-mounted electric motor;
- With a bottom-mounted electric motor.
From the point of view of safety measures, mowing grass wet from rain or dew can only be done with a gasoline trimmer or a “Lithuanian”. The use of electric lawn mowers is highly undesirable. Especially when it comes to instruments with a bottom engine, as they are in the area of water ingress. As a result, a Short Circuit may occur.
It is not recommended to mow the grass in rain and with overhead trimmers. In case of water penetration to the power unit, it can not only short out, but also shock the mower.
Wet grass must also not be mowed with electric lawn mowers. The reason is the same as with trimmers with a lower location of the power unit. There is a high probability of a short circuit. In addition, there is a danger that, through negligence, the power cable supplying the unit could be accidentally cut.
Why you shouldn’t cut wet grass with a trimmer
There are also indirect reasons why it is impossible to mow the grass wet from dew or rain in the garden. These include:
- Premature trimmer wear
- Damage to the lawn.
How can a lawn mower be disabled by cutting wet vegetation? Everything is very simple. It is displayed as a result of a short circuit when water enters the power compartment. In addition, even if everything is very well sealed, there is a good chance that the engine will not be able to handle the heavy load put on the flex trimmer shaft. And the shaft itself can turn. Such loads most often arise from the sticking of wet grass on the knives and on the spindle to which they are attached.
In trimmers with a gasoline engine, mowing the grass in wet weather, due to heavy loads, increases the degree of wear of the main components and assemblies. Here you can note the premature failure of the piston pair, as well as other moving parts. Most often, the piston pair fails due to engine overheating. In our case, the motor will overheat due to the load created by wet grass when mowing.
Is it possible to cut wet grass with a trimmer
Permanently living in a private house, it is not difficult to follow a systematic lawn care schedule. Even in wet weather, wet grass can be cut with a lawn mower or trimmer a day later after it dries. It is much more difficult to take care of the natural grass in the summer cottage. Since visits fall on weekends, mowing also falls on these days. What to do if the weather is rainy?
How to cut your lawn to keep it smooth
In order for the lawn to be cut evenly, the mower should be lowered as low as possible during operation. The plot must be divided into squares. You need to work by moving clockwise. In this case, the hay will always lie on the left without getting in the way.
How the trimmer works and how to use it correctly: refueling and first start
Lawn mowers are devices that make it easy to maintain lawns. The question of how to use the trimmer is asked by those buyers who are just going to purchase a garden tool. The industry produces devices of different types, so when choosing, you need to pay attention to their characteristics.
Principle of operation
If we consider the principle of the trimmer, then it is similar to a hand braid. The difference is that it is equipped with a motor, with its help the cutting element is set in rotation.
Manufacturing companies produce the following mower models:
- On which a gasoline engine is installed. These garden tools have a fuel tank, which is their distinguishing feature.
- Devices with an electric motor. These tools are lighter because they do not have a fuel tank. But when choosing such models, you need to take into account that a power source is needed for their operation.
All electric streamers can be divided into those that run on batteries and models that are connected to the mains. Each type has its own characteristics, but they affect the power supply unit. If you do not take it into account, then the rest of the design is similar in different devices.
If you take any trimmer model, then it consists of elements such as:
- Motor;
- Fuel tank (electric lawn mowers do not have one);
- Levers with which the mower is controlled;
- A knife for cutting grass;
- Barbell;
- Spool with wound fishing line, which is used for cutting grass;
- Protective cover;
- Bevel gearbox.
The motor is placed near the mowing head and can be mounted from below or from above. The gearbox is only available on models with a straight bar. If it is bent, then the main bearing becomes the connecting element. It consists of 2 bushings.
The choice of the cutting element depends on how hard the grass must be mowed. Most often, a fishing line is used, it is called a cord. There are products of various shapes on sale; among buyers, spiral and round ones are in demand.
The line is wound on a spool, it is inserted into the spool, while the 2 ends of the wire remain free. When the mower motor starts running, the bobbin rotates and the free line ends cut the grass.