Star for angular grinder pit assembly. Safety precautions

Star for angular grinder 180-230mm p.I.T. P0010007

We will have it on Abito 8 years old. In the rest of 7700 positions of the infrastent, the call is zapanee before arrival! BSO in no, but we are doing without a showcase! Our assortment I can throw off on watcap. At the same time, the baszhera is wrapped in a wrapping up (1-3 hours). Prejudice. With a pickup payment upon receipt. Extract of goods up to 17-00, issuing up to 21-00 on the same day. Stand for angular grinder p0010007 (circle diameter 180-230mm, angular vice 45 degrees, cast base) use a grinder grinder angular angle grinding machine Fortune machine machine for metal like a metal saw like a cutting saw for metal

We found this announcement 2 years ago, click and the system will automatically notify you of new offers from all ads of ads

New complaint

announcements

You can buy handrails for the disabled in Chelyabinsk and the Chelyabinsk region with us. “Metal comprehensive”. Making stainless railing according to standard drawings and projects. Our company offers the professional manufacture and installation of railing, ramps, handrails, stainless steel fences, as well as any metal structures. We work without intermediaries, our own production and high.quality installation, with a guarantee of quality for all fences. Our company has been in the market for 5 years and have established itself as the best company in the Ural region engaged in the manufacture of stainless steel fences, metal structures and products for small.mobility groups. We will complete the work as soon as possible. We work officially under contracts with organizations, the budget sphere and with individuals, with any form of payment for cash and bank transfer. The railing uses steel AISI 201 and AISI 304, the use of pipe for handrails and racks with a diameter of 38mm, 42mm, 50mm, as well as the profile 40×40 and 40×20, a pipe with a diameter of 12mm, 16mm, 25mm, a potabole or triplex is used to fill. What steel is used by the choice of steel directly depends on the conditions in which the fences will be installed so, for installation on the street, AISI 304 brand is used. Thanks to the increased nickel and chromium and the addition of molybdenum, it tolerates high humidity, temperature changes, is not subject to corrosion and is well used for aggressive media. For railings that will be used in rooms where there is no aggressive environment, Aisi 201 brand is suitable. Installation of railing, ramps, handrails, stainless steel fences, as well as any metal structures and products for low.mobility groups of the population. Stainless railings, for example: handrails for the disabled size, m: 3 ▶ ▶ Cross. a full catalog of stainless fences in our profile. The Love button on the right. You can also choose the main designs or order fences according to our own sketches, drawings or projects. we are ready to start the most non.standard tasks! Write and call. a detailed consultation of the designer and engineer. Our advantages: our own production work without intermediaries Professional installation of quality guaranteeing we work with individuals and legal entities. There were questions? Call and write. Add the ad to the elect so as not to lose the most profitable offer for the railing in Chelyabinsk and the region!

Favorable installments! Free delivery in Kazan! We calculate the bonuses! GIVE GIFTS! Change Xiaomi rag for Deermma Spray Mop (4pcs). High.quality goods at an affordable price! We will return 65 bonus for this purchase. You can pay with bonuses the following purchases from us at the rate of 1 bonus = 1 you can pick up today. There is a pickup and free delivery in Kazan (we deliver from 5,000 for free, except for large household appliances). For household appliances, specify the availability of goods with the operator. ☎ Call us and demand three gifts when buying from 3000:. Free delivery in Kazan. Installment. Headphones. Advantages of our company: installment plan for goods and more than 50,000 satisfied customers for 10 years of work! A profitable bonus system! are lower than in most retail stores! ️ can add an ad to favorites so as not to lose! Looking for a quality gift? You can buy it cheaper from us! ❕ Discounts to regular customers ❕ Deamma rags are great for floor cleaning from spilled liquids or persistent dirt. Their fibers fit tightly to the flooring, from the very first movement, cleansing it from dust and delighting you with excellent purity. In the material of Deamma rags, the thinnest synthetic fibers are woven with carbon fiber, forming small hooks at the ends that capture particles of dust and penetrate deep even into the cracks between the tiles or coating elements. With their help, you can achieve even better cleanliness than with manual cleaning. Rags easily collect even pets wool. Fastener: provides a strong fastening of a rag on a mop, while allowing you to easily remove and change them. Water.absorbing layer: absorbs and locks water, supports the moisture of a rag for better removal of dirt. Cleaning layer: attracts dust and dirt, withstands abrasion, captures dirt with hooks at the ends of the fibers. Old mop during cleaning leave behind stains and dirty traces. Deamma rags 10 mm thick are better absorbed and water is locked, managing both dry and wet cleaning, and leaving behind only the floor sparkling with its purity. The wide Deamma rags are 355 × 120 mm in size, they are firmly attached to the mop on the ribbon of Velcro, and to replace it is enough to step on the edge without even smoking. The rags hold tightly on the mop while cleaning and movements in different directions, while easily change in just a second. Unlike ordinary spongy mop, which can only be washed, deerma rags can be removed from the mop and washed well without dodging with a mop, and then put them back for clean cleaning. Each rag service life. about 3-6 months, it depends on specific operating conditions. To view the entire assortment, click the Zurmarket to the right of the photo, or go to our site by typing in Yandex or Google Zurmarket. There were questions? You can see everything personally by evaluating the quality and design at:. g. Kazan, pr-t Yamasheva, d. 45 (17-storey building opposite the shopping center “Park House”); You can look at the entire assortment of our store by clicking on a zurmarket under this ad! All are indicated with a discount for cash, credit, installments (there are restrictions on banks).

Special offer: If you are contacting us with Avito, you will receive free delivery within the city of Krasnoyarsk as a gift or a pickup discount 10%. The composition includes: gypsophila, bush rose, hydrangea, etc. Flowers. Bouquet price: size S-2300 rubles size M-4000 RUB.6300 (in the photo) size.9000 rubles you are welcomed by the Bouquelil Flower Studio. Write or call us and we will help you choose the perfect bouquet for you. Addresses of Krasnoyarsk, Soviet and central areas. St. May 9 59, ul. Courage 14, st. Aviators 21. ! For order, call/write (can in VOTS AP or in Avito chat) our advantages: only fresh and persistent flowers! Direct deliveries from Holland, Ecuador and work without intermediaries, due to which the price is lower than that of competitors, our studios work daily from 09:00 to 21:00, without weekends, the team of professional florists will gather a bouquet, based on your wishes and timely delivery of the order and timely delivery. budget! Before sending, we send a photo of the bouquet for approval (if desired) we will transfer any wishes and congratulations, we subscribe to the postcard (postcard as a gift), at the request of the customer we can hand over the bouquet anonymously. We work with corporate orders! Direct suppliers from Holland and Ecuador and there are discounts for regular customers from us you can purchase: rose, rose, orchid, alstromeria, eastoma. Bouquet-commercial, bouquet on September 1, Knowledge Day, Bouquet to the teacher, bouquet of flowers, bouquet of fresh flowers, prefabricated bouquet, author’s bouquet, bouquet, floristry, September 1, bouquet, flowers, delivery of flowers, bouquet of bouquets, bouquet, bouquet, bouquet, bouquet, bouquet A composite bouquet, roses, delivery, bouquet with roses, bouquet to his wife, bouquet to mom, bouquet colleague, corporate gift. Promotions and discounts are irrelevant during the holidays. For information on relevant offers, contact the managers of our Salon of Flower!

Materials and tools

The first question that a home craftsman faces when constructing a rack for a corner grinder is to make it from. The answer to this question is elementary: what is, from that we will do. If there are water pipes at hand, they will come in handy for the manufacture of hinges and guides. If there is a metal corner. we will collect the bed out of it.

The main and most difficult node of the pendulum cutting saw is the hinge node. The greatest loads are on it, while the pendulum lever should not be able to arbitrarily deviate to the left or right. Take the design of this node with the greatest attention. Perfectly use roller bearings. Pick a couple of suitable sizes. and already “around them” build the rest of the design.

It is best to make a pendulum lever mount on ball or roller bearings. This will provide the best accuracy and stiffness. But if there are no suitable finished products, it is quite possible to see options for homemade structures of this node.

If there are no finished bearings, select vapors from metal tubes and steel pins of suitable diameters. This will not make it too high quality, but homemade bearings. For a “plywood” machine, good loops-canes used to attach doors and gates will be completely reduced as a suspension of a pendulum lever.

In any case, the pendulum lever itself is best made from a metal corner or metal profile. But the holder in which the corner grinding is fixed, will surely be made of a wooden beam.

For reliable and dense fixation of the corner grinder in the holder, it is better to glue the bed with soft and durable material. For example, a leather substitute. And pressing the corner grinder to the holder is most convenient for the flexible metal ties with a screw knot. These are widely used in plumbing and car service.

The bed is best made from a thick sheet of metal. Compromises are possible, up to a thick plywood fixed on a frame from a wooden beam. It is good to provide on the desktop the ability to fix the stubborn corners under some standard angles to the cut axis. Thus, we will get a “end saw”.

Do not forget to control the inclusion of a corner grinder on the machine in the usual way now will not work. The operator’s hand on the control keys we can replace all the same screw screeds for pipelines. But the key control post (which we will fix it on the bed), the outlet for inclusion in the circuit of the fixed corner grinder and a wire with a fork of sufficient length to include the entire machine to the network should be soldered.

If we have metal blanks at our disposal, it is best to connect them with welding. If you do not have this opportunity, it is better to turn to familiar masters of this case. Bolter compounds are spanning over time and nullify all the advantages of the metal frame.

Of course, in the manufacture of the machine, the corner grinder itself will come in handy. Cutting with it with the help of a workpiece for a rack, you can feel like a munhgauzen pulling yourself out of a swamp by a pigtail.

Production options

Honestly, the drawings of racks made in many ways should serve as a food for thought. It is worth looking at the design, standard sizes of standard elements and general design principles. Then apply them in our particular case.

The fact is that the size of the structure and individual nodes will be completely dependent on what you have at hand. For a large angle grinding machine (for example, corner grinding-230), you may need to make a larger holder than indicated in the drawing. This will entail the need to replace the bearings and so on.

General principles are quite obvious. The simplest and most used machine is the transformation of manual corner grinding into a stationary pendulum saw. This design consists of a bed, rack and a pendulum lever, a pivotally fixed on the rack.

Consider the manufacturing options depending on the available materials.

Rectangular

Very harsh in itself, such a profile allows you to construct a hard and strong bed. It is even more important that the pendulum lever made of such material is almost not bending during operation.

But the frame of Stanin is only half the battle. On top of the frame it is necessary to apply a “countertop”. a plate on which the processed material will be placed under the corner grinder.

If the frame is assembled from metal, the best material for the desktop is a metal sheet. However, a thick sheet of plywood or wood stove is also quite suitable. Just do not forget that directly under the disk of the corner grinder in the countertop, you need to provide a fairly wide slot, ensuring the through course of the disk through the cut material.

Vertical stand is a very loaded node of the pendulum saw. The use of a metal profile will create a solid and stiff design.

When using metal as a basic element of the machine, preference should be given to welded joints. Of course, metal profile products can also be connected by bolts.

But such compounds do not provide the necessary stiffness.

Pipe carriage and shock absorbers

If water pipes, a pair of automobile shock absorbers and a metal corner or profile are found in the reserves. you can make a wonderful end (it is a “cut.out”) machine with a transverse horizontal supply of a carriage.

The pendulum node is still necessary to bring the tool into the cutting plane. But the carriage, mobile along the pendulum lever, can significantly expand the range of the size of the material. Now you can cut off quickly and definitely not only pipes, profile and beam.

The horizontal course of the carriage allows you to carefully cut the sheet materials of the width that we can design.

To ensure a smooth, but at the same time, the exact course of the carriage is usually constructed complex rail nodes with spring.loaded bearings. But you can use car shock absorbers. They have a very strong and accurate design. If you remove gas and liquid, you get excellent guides.

Rear shock absorbers of VAZ cars have a stroke of a rod of almost 200 millimeters. This will allow, for example, when mounting on a carriage, an angular grinder-230 organize a fishing line for a cutting cut up up to 400 mm long. But even if you have a compact corner grinder with a disk with a diameter of only 150 mm, you can still cut sheets up to 200 mm wide. This is more than covered most of everyday tasks.

When constructing the “guides. carriage” node, based on automobile shock absorbers, it should be taken into account that the shock absorbers themselves are quite thin and easily crumpled. To the upper lever of the pendulum, such “guides” should be mounted with semicircular clamping brackets. It is then that water pipes come in handy.

Wood elements

If there is no way to make the basic elements of a pendulum saw from metal, do not despair. Many structural elements can be made of wood. First of all, it is a bed, a pendulum lever and a corner grinder holder.

Metabo Angle Grinder Safety (US Version)

The bed can be made from any suitable lumber. Frames collected from bars of solid and heavy wood are very good. They are strong and rather heavy. This ensures the stability of the entire machine.

A bed collected from an oak beam with a cross.section of 100×100 mm is certainly impressive. But it’s too expensive. For the base of the working table, thick bars of larch or even birch bars are quite suitable.

But for the manufacture of a pendulum lever, you can just use noble varieties of wood, traditionally used in furniture production. Oak here will be quite appropriate.

When constructing a wood machine, do not forget about the overall stiffness of the structure. Significant dimensions of the bed allow for the strength and stiffness of this part in the manufacture of non.quality materials from non.quality materials.

The pendulum lever has a long, elongated design. If you make it from wood, its geometry can be unstable when temperature and humidity change.

For this structure, it is better to use the so.called furniture shield, consisting of several wooden elements glued together.

Stannoy for cutting sheet steel

We cut the workpieces from the profiles in size, and weld them into a frame with an approximate size of 350-500 mm. This will be the basis for our rack.

Collect a bracket for mounting a corner grinder. Mark and drill holes with a diameter of 10 mm. in the profile, and then we saw off its size. We fasten the obtained parts of the profiles on the corner grinder and weld each other.

Then we cut off two pieces of profiles, from which the stand for the corner grinder will be mounted. Profile length is approximately 30 cm. In the center of the profile, drill a hole for installing a hinged axis in it.

Collect a hinge axis from a bolt M10 long 150 mm. Install it in pre.drilled holes at the ends of the racks, while ensuring free rotation with the help of elongated nuts.

We weld the elongated nuts on the axis, and check their free rotation on the axis.

We cut off two more pieces of profiles, the length of which is selected in size of the corner grinder. It will be a rack lever.

On cut pieces of profile, mark the circuit of elongated nuts and cut out the circuit on the ends of the profiles. This is not necessarily, but will provide a more dense adjustment of the metal for welding it.

Weld the resulting profiles to elongated nuts. To comply with the parallelism and identity of the installation, we fix the profiles of the clamp.

We weld the resulting rack with a lever on the axis to our basis.

We connect the rack lever with a bracket attached to the corner grinder using a specially prepared corner with longitudinally cut holes. So we will ensure the deviation of the disk of the corner grinder to set up the exact angle of the cut.

Next, we take out a standard bolt from the handle of the corner grinding and insert the elongated one, which will pass through our bracket, and reliably fasten it with a corner grinder.

We weld two pieces of a profile pipe to the base of the rack. We set them in the same plane with the base. It will be a support for cut off parts.

We set the corner grinder along the disk and the base of the square. We attach it to the rack bolts.

Two more pieces of profiles are welded to the framework. These will be guides for the turning point bolt on the bed.

In the rotary corner, we sing a longitudinal hole, which will allow you to move the corner along the guides and fix it in the right place with a bolt.

The legs for the bed will make from bolts with rounded hats. It will be convenient to regulate the horizontal level of the base frame, and to expose it clearly.

We drill holes in the bracket attached to the corner grinder and the upper part of the rack. We fix the steel hooks in it.

Remove the desired spring length and cling it to the hooks so that it returns the corner grinder to the upper position.

We make a trial cut. Check the cut off a piece of the workpiece for the correct angle.

The rack can be painted in the color you like or simply primed metal with a primer.

The result was a great solid stand for corner grind. There will be no difficulties in cutting metal blanks at any angle with such a device.

Note: all welded seams, sharp corners of all the parts of the rack must be cleaned and twisted. Prepare a rack for painting and paint in any color you like.

Pendulum of the village

The supporting part is mainly made of sheet metal. It can be a factory bed, for example, from a drilling machine or any other, where there is a flat platform. On the bed for corner grinding, there must be a guide where the pipe is rested during cutting. The guide does not allow to shift the workpiece during the operation. In addition, for greater convenience, you can equip a support with a clamping mechanism that will be motionless to fix the pipe to the corner grinder guide during operation.

Standing, or tripod, is an element vertically going up. It can be made of a profile or round pipe. In the upper part, a bearing node is attached for a movable connection of a rack with a pendulum console angular grinder. The height of the tripod depends on the size of the corner grinder and the pendulum device. Type of pipe (its geometric parameters and wall thickness) is selected depending on the power and mass of the power tool.

Corner grinding pendulum bar performs two functions. Firstly, she harshly holds an angular grinder, thereby preventing the disk in the axial direction. Secondly, with the help of it, the tool is performed to the processing area, that is, the corner grinder can fall into the working position, make a cut and return to the starting position. To control the console, a special pen is also provided on it.

The design of the counterweight with the shock absorber

  • The traditional type. It is made by installing the weight on the tail of the console bar. The weight of the cargo is selected so that in the starting position, the corner grinder is at the top, but when it was lowered on the workpiece, it was not necessary to make much effort.
  • Spring mechanism as a counterweight. In this case, in the upper position, the angular grinder holds the force of elasticity of the spring. The most suitable for these purposes is a spring for closing the door leaf.

The shock absorber or emphasis is also necessary in the design of the rack for the angular grinder. The main task of such an element is to prevent the movement of the tool when moving down below a certain level. At the moment when the pipe is completely cut, lowering the corner grinder should stop.

Corner grinder

As I do not try to saw off a pipe or corner with a corner grinder. it does not always work out smoothly. precisely, almost never.

Here, in the process of manufacturing the next home.made, he freaked out. he threw all the things and decided to make a rack for a corner grinder. With its help, I can evenly saw off not only under 90 °, but also under 45 and 30, and in general at any angle!

I invented sizes and design in place, based on the materials available. Now it’s not the time to buy something on purpose.

At first I found the components for the hinge on which the corner grinder will rotate.For high.quality cut, the hinge should be powerful enough and without the slightest backlash.

I found an old shaft and a flange from the Volgovsky pump and several bearings, including those killed.He collected such a sandwich to maximize the bearings among themselves:

For the outer clip of hinges I found a suitable pipe

She was a little big in diameter, so he made a longitudinal drank to clamp the bearings, like a clamp.

Welded a couple of corners and drilled holes in the right places

The second component of the rack is a pendulum with a mount for a corner grinder.

The mounting of the corner grinder arched from the strip 2.5 mm

The fastening welcomed, trying to comply with the parallelism of the corner grinder to the plane of rotation of the lever. To do this, when he cooked, inserted the rods into the fasteners. he controlled parallelism on them.

Why are all holes and welded nuts are needed, it will become clear further._

The third component is the base.It is welded from the corner 32×32

Two profile pipes 20×20 in the middle are guides for an adjustable stop, which should fix the workpiece.

The table made from a plate 30x30cm 3 mm thick, sawn into 2 parts. Attached to the base of the M5 screws.

In the continuation of the table, on the basis of welded a 3mm plate. It is for attaching a return spring, and in order to level the level of the table further along the guides.

After all the examples and fits, he collected the rack together:

On the one hand, it is screwed by a regular pen, on the other. a bolt m8

Adjustment of the corner grinder vertically. from above and below two stops (legs from furniture)

Bearings are clamped in a clip with a bolt m6

A clip is screwed to the base with two m6 bolts

The right hole is oval, so that the position of the clip can be adjusted

Return spring. from Volgovo pads.

star, angular, grinder, assembly, safety

So that she could not jump off the mount, made a clamp from the galvanizing.

In one entry does not fit everything. too many photos.

Continuation (on adjusting the position of the corner grinder and the manufacture of the stop) will be in the next record.

Corner grinder

As I said earlier, there are two problems in the garage. to cut off and evenly drill. The problem of drilling was solved, the drill stand cost the time and money spent one hundred percent. She dusted in the corner for a long time waiting for a corner grinder. It is the corner grinder. made in the distant 1977. In Bulgaria on Elprom Lovech, terribly heavy but, according to rumors, a very reliable angular grinder. I tried to work for her. I considered myself, if not a cool specialist, then certainly experienced. Always worked large Makita 9069, the thing is quite powerful and heavy. But the corner grinder in comparison with Makita is a wild beast. With a similar power of power 1.9 kW it is tangibly heavier, moreover, specifically mine under the discs of 180 mm and speed at the output of 8500 rpm. In general, I decided then that I won’t take it into her hands (refundable) and she only in the rack. And I wanted to make a rack for a very long time. And of course the stand should be as usual. “light, strong and reliable”. I must say right away, the only excuse for the work done. “Well, for yourself, for many years, a good tool is not simple”.He started like everyone else. he cooked a rectangle for the base

The rear hub is taken for the hinge, it seems to be from Chery Tiggo. Cut the central ledge from her, chose the ABS sensor.

The hub is attached to the channel, in which the hole for fastening is cut. Cut out a corner grinder, quite difficult for the way. He finished a file.

The main bracket for corner grinder began to make from the very corner grinder. First he adjusted the corners to the full.time places for fastening the handles, then welded the third corner between them.

Then he bent the bracket-homut on the body of the corner grinder of 2 mm steel.

The bolt welded to this clamp and connected the corner with the fastener. To the entire resulting design welded a 50×50 pipe with holes for fastening to the hub

Using the bolt, the position of the angular grinder is adjustable relative to the table. Next, I weld to the base of the 60th corner-a channel will be attached to it. I pretend to be the location and drill a channel and a corner under it. The fastening bolts will be different. M10 and M12, this is due to the second adjustment, the channel must turn slightly due to the enlarged holes for the bolts.

Then he welded two more pipes-guides for the clamping mechanism, and also strengthened the structure with two segments of the 50th corner.

Further on top of all this I weld sheets with a thickness of 4 mm. No matter how hard I tried, but it did not work out perfectly even surface, there are 1-1.5 mm changes, but in practice, this does not affect the accuracy of the cut.

Now you can collect the installation. Additionally I aminating the corners of the channel and the main bracket. The total installation weight becomes not yet critical, but already quite interesting.

Then there was the longest and dreary. equipment for work. This is an emphasis and a clip for the workpiece, it is a return spring, it is a table expand. Let’s start with the stop for the workpiece. Take a segment of the 50th corner, weld a small rectangle to it.

Now you need to cut the arc in it so that you can cut the workpieces at any angle. With the help of the template, first the holes in the arc. Then I grind the arc completely with a cutter.

Now the clamping device. The screw is taken from the old and bent eighth jack. I rightly reasoned that it would be better than an ordinary Chinese hairpin. The end of the screw I stood up to 6 mm and cut the thread.

For the mobile part, the most difficult thing is to make an axis. I made from the segment the very Chinese stud, I will say right away. I didn’t use a turning room, I gripped it to the desired diameter of the corner grinder, albeit with some devices.

It remains to fix the nut. The clamping device was planned to be removable, so it is attached to the bolts, the thread is cut right in the desktop. The jack of the jack was sown with pieces of 4 mm steel.

Since the clamping was ready, I decided to cut the pipe for the legs of the table, at the same time see how it all works. As a result, he made the neckline on the stopping of the workpiece. in it the corps of the angular grinding gearbox rested. Also, a little later he cut the clamp in the width.

By the way, the photo shows nuts with lambs. with them I worked one cut. Never use nuts with lambs in such places, manual effort is extremely not enough for good fixation of the stop. This is an invaluable experience. the nuts weakened, the disk shattered into shreds. Now there are ordinary nuts, I always tighten very tightly.Then the return spring. Well, like a spring I thought there would be a spring, but in the end it turned out something abruptly. I realize that everything has complicated everything, but the result was worth it. So I presented what a powerful spring I need to hold the corner grinder, and that the force at the end of the cut should not be small. In addition, after the cut, it is necessary to smoothly remove the corner grinder up. And I wanted to cut it, let go and she herself smoothly returned to its original position. What is needed for that? Gas emphasis of course, from nine, has long been lying on a shelf. And yet. the return system should be hidden, that is, to work from below. This means additional rods and levers will be needed. In fact, it turned out to be easily quite easy, I would even say quickly. First made a slot in the table under the lever. The lever itself made from the corner, through many examples he gave it the desired shape. The lever is attached directly to the hub, to a regular stiletto.

You will need some more details. actually gas emphasis, a long craving for it, a clamp bent from a hairpin M6. The emphasis got up as it was. Earned the first time. At first it seemed that he raises a harshly, but when the corner grinder was overgrown with all kinds of handles and casing, it turned out just right.

Tags: a stand for a corner grinder, a corner grinder corner

Log in or register to write Комментарии и мнения владельцев, ask questions and participate in the discussion.

Well done! I wanted to first when I read it for the meaninglessness of the use of 180- But the disk. And so excellent. First, he himself also made from a corner grinder with 230 mm. At 2.2 kW but this is not enough, I had to buy a factory Metabo

Why so few? The power is quite normal, unless of course cut the channel on the channel of the channel all day))

For my tasks, her tasks became small- 80×40, 80×60, 80×80 and at an angle of 45, 100×100, etc.D. Homemade worked well with a book pipe 60×40

I agree, 230 more around 50×50 is no longer convenient to work

You are very confused.But made for 5.

star, angular, grinder, assembly, safety

Thanks. When I started, I thought everything would be simpler, but it turned out as it turned out)))

Made with a soul and beautifully!However, if I would initially do it, I would certainly lay the 2nd degree of freedom of movement of the circle. not only according to the radius, but also the longitudinal displacement in the cut plane. This allows you to cut along leaf blanks and more fully use the cut.out circle. And so I had to make a rack with a large angular grinder www.Drive2.ru/c/527593508836478433/. And with a small corner grinder, I took into account my previous experience.And the table is wonderful

The broach of car shock absorbers is not suitable, especially with a large corner grinder. I am an ardent opponent of any backlash, and shock absorbers are playing. Better, the option with the crossbar for the broach is suitable.

Well, there is no backlash there, there is no rod and guide sleeve made with great accuracy and the piston in the sleeve. Another thing is that the larger the departure, the greater the console and the less the distance between the supports of the rod, however, with small sorties, in relation to the size of the circle and the workpiece, the rods of the rod are located quite widely and the rigidity of the excellent. By the way, in the hub bearing, the backlash also arises over time, another question is its value and how it affects the cut

The broach of car shock absorbers is not suitable, especially with a large corner grinder. I am an ardent opponent of any backlash, and shock absorbers are playing. Better, the option with the crossbar for the broach is suitable.

A broach of automobile shock absorbers. a complete hat. The best option is furniture guides with balls, and 4 pieces, 2 per plane. There is no hint on the backlash.

From the steering pendulum from the Lada is made, much easier and faster.

The steering pendulum is small for such a load.

In size, the pendulum is not very large, the bearings in it are small, and the housing is alloy if I am not mistaken. I made it not faster and easier, but more difficult but more reliable. Although everyone decides what to do from.

There are no bearings there, he is on the bushings.5 years saw a brick, much more reliable then? Lives in the environment of an abrasive, shake a shag in the water in the water. Has no weight, compact to disgrace.

There are pendulums with bearings, and I would choose just that. Your system should have a tangible backlash. But in general, as a quick option, although if 5 years, it was possible to finalize slightly.

With bearings, the pendulums are complete crap, bearings in pendulums work very poorly.I don’t have a backlash at all. Zhiguli through such a pendulum rotates the wheel, the load in comparison with the corner grinder is ridiculous. This design will be eternal and there is nothing to modify here.

There is nothing eternal. There is no backlash? This is because the brick is cut like an oil with a knife. Try metal. you have to crush it and possibly strongly. Where the pendulum connects to the bracket. there can be no backlash, the bolt will bend, even if it is fecked. And there is nothing to modify here if you continue to cut a brick (but at least the emphasis for brick could be put). You will not have to modify the metal for metal cutting, but completely redo.

No backlash, no. I look at you never cut a brick, and cut the metal with a huge discharge of disks. It’s funny to listen to such heresy. It’s wrong, it’s wrong here))) And by the way, I cut it with metal too periodically)) and everything works))

The brick cut, albeit not a thousand pieces, but with a hundred definitely will be pickled up. It is cut by a saw discount disk easily and quickly, without tension. Heresy. cut metal on a faner. And about the backlash you can say anything, but one bolt M12 will bend with the effort of the hand with the corresponding lever. And your device’s functionality even for brick is not enough. And cutting metal without fixing at least with clamp is simply dangerous. And what does the disc consumption have to do with it? In general, perceive constructive criticism steadfastly, since you dared to show your “eternal” device.

Enough to mix me already)) The device has been working for five years, and they are trying to prove to me that everything is not done for me))) Nothing bends, nothing plays)) Bolt M12, where he is? Look here what I’m doing VK.COM/album-96629171_225700089 and for some reason more than more than)) criticism here you can’t withstand sir) and continue to press the disk stronger, stronger!))

Star for corner grinder caliber 96211. Convenient device for “corner grinder

Categorically welcome all readers of the Live blog from IXBT!

This is a convenient device that turns a simple “angular grinder” into a cutting and ending installation.

Can be cut quickly and accurately, at different angles. And the universal mount is suitable for most angular grinder with a disk diameter of 115 mm and 125 mm.

The appearance of the rack is the base with the installed resistance for the clip of the tool, the handle and the mounting of the part.

Accordingly, he received everything quickly enough (about 8 days) from the presence from the warehouse.

Inside, tightly packed parts of a disassembled rack.

The kit in the photo. For assembly, you will need to set the rack on the base, plus screw the handle.

Large details are pulled by plastic ties.

There is an instruction for assembly and operation.

Guide and handle in a separate package.

Mount for corner grind. Fasten bolts are present.

There are two types of bolts and two screws with rubber caps to fix the corner grinder body.

Steam stand for the rack. There is a clamp of the partition details.

The size of the stand is approximately 28 cm (square).

On the bottom is clearly visible the nuts preinstalled in the grooves.

Warning nameplate: don’t get into it. kill! you need to set up on the equipment disconnected.

The assembly takes place without any problems.

The nuts are fixed from the back of the grooves, only a hexagonal key will be required to tighten the screws.

The stand itself is collected. Check the tilt mechanism.

After pressing, returns to a vertical position.

Falls almost to the stop. With the installed corner grinder, the vertical stroke of the rack will decrease.

Guide and eccentric-and-mock for the part.

The stand forms, as it were, a vice for fixing the cut.off workpiece, from the fixed and mobile part.

The motionless part allows you to install the desired angle of cut.

The mobile part in the form of a clamp with an eccentric allows you to quickly grab parts of any size.

Put the nut as necessary, and turn the handle with the clamp.

A few words about fixation angular grinder in the rack.

The tool housing provides for holes with a thread for installing a handle.

Pre.remove the handle with a corner grinder, and combine the holes with the holes in the mount and wrap the bolts. The second pair of bolts is needed to fix the case. Plus horizontal screws with rubber tips. allow you to align the corner of the corner grinder. First, we align everything and try on whether the cutting disk falls into the groove intended for it at the base. If necessary, you can move the rack to the left or right.

I used a postglass grinder for cutting calibrated guides and running screws of 8 mm for CNC machine.

Racks for angular grinding mash. 378 goods.378 goods

The cutting stand is suitable for angular grinding machines with a disk size of 115 mm and 125 mm. This practical cutting stand turns an angular grinder into a universal and safe machine for cutting profiles, pipes and metal rods. Universal adjustable fasteners for ug.

star, angular, grinder, assembly, safety

Redverg GS-230 stand is an auxiliary installation that allows you to fix the angular grinder (with a circle of a circle of 180 and 230 mm) in a certain position and perform cutting work, using it as a machine. Thanks to the ring spring, an angle grinding machine.

Svensson Industrial E7055. Commercial stand for 10 vultures. Strong frame with impressive dimensions of 10050 3 mm thick and powder coloring in two layers

The stand is intended for (angular grinder) angular grinding machines with a disc diameter of 115 mm and 125 mm with a cast.iron base. It is used for stationary work. Product properties: for angular grinder with a disk diameter of 115 and 125 mm, a cast.iron base for stationary work base 235.

Type: Purpose: for angular grinder the length of the guide: 125 mm

For a drill, length 150 mm, height 400 mm, steel

Angle Grinder Safety

Rack. Corner grinder for fastening 150/180/230 mm, cast iron. base, fast.fast. Sturm vise! 1093-AG-230; The turning angle of the vice relative to the table (degrees) 0-45; Base size 275290 mm; Type of packaging cardboard box; Weight 6.25 kg

Purpose: for the drill the length of the guide 210 mm

Designed for inpatient fixation of angle grinders. Equipped with a pendulum mechanism that guarantees an accurate cut of workpieces from various materials. Cutting angle. 0-45 degrees. Attention, the image of the product may differ from the real!

Type (clamping for angular grinding): stand, type: stand, manufacturer goods codes: 245-001

The SMS-43 MU stand is an auxiliary device for manual drilling machines (electrical and battery-offs with a 43 mm seam plant with a sewage diameter).The stand is designed for convenient drilling holes to a given depth at an angle of ± 45º to the working surface.

It is used as a means of fixing and insurance of a car raised on a lift to perform repair work, as well as for the installation of dismissal elements and other units. A large range of vertical movement, low weight and compactness provide led.

Star for drilling machines (later on the text. “stand”) is a stationary device for attaching machines of manual drilling electric ones, having a sewage diameter of 43 mm. Using the rack allows you to perform drilling work on metal, d.

Compact studio stand for exit filming. With its fairly small dimensions, it is able to withstand a load of up to 5 kg of Fujimi FJ8701 made of high.quality aluminum alloy. Differs in strength, lightness and compactness. The presented model l.

The stand for grinding machines is a stationary device for attaching machines grinding angular (mush 115/125/150) with a nominal diameter of the grinding of a grinding circle from 115 mm to 150 mm inclusive. Using the rack allows you to quickly and precisely p.

Purpose: for a drill rack height 400 mm

The stand for grinding machines S-125 is a stationary device for attaching machines grinding corner with a nominal diameter of the grinding cut circle from 115 mm to 150 mm inclusive.Using the rack allows you to quickly and accurately perform a cut.

Racks for angular grinding mash. 378 goods.378 goods

The cutting stand is suitable for angular grinding machines with a disk size of 115 mm and 125 mm. This practical cutting stand turns an angular grinder into a universal and safe machine for cutting profiles, pipes and metal rods. Universal adjustable fasteners for ug.

Redverg GS-230 stand is an auxiliary installation that allows you to fix the angular grinder (with a circle of a circle of 180 and 230 mm) in a certain position and perform cutting work, using it as a machine. Thanks to the ring spring, an angle grinding machine.

Svensson Industrial E7055. Commercial stand for 10 vultures. Strong frame with impressive dimensions of 10050 3 mm thick and powder coloring in two layers

The stand is intended for (angular grinder) angular grinding machines with a disc diameter of 115 mm and 125 mm with a cast.iron base. It is used for stationary work. Product properties: for angular grinder with a disk diameter of 115 and 125 mm, a cast.iron base for stationary work base 235.

Type: Purpose: for angular grinder the length of the guide: 125 mm

For a drill, length 150 mm, height 400 mm, steel

Rack. Corner grinder for fastening 150/180/230 mm, cast iron. base, fast.fast. Sturm vise! 1093-AG-230; The turning angle of the vice relative to the table (degrees) 0-45; Base size 275290 mm; Type of packaging cardboard box; Weight 6.25 kg

Purpose: for the drill the length of the guide 210 mm

Designed for inpatient fixation of angle grinders. Equipped with a pendulum mechanism that guarantees an accurate cut of workpieces from various materials. Cutting angle. 0-45 degrees. Attention, the image of the product may differ from the real!

Type (clamping for angular grinding): stand, type: stand, manufacturer goods codes: 245-001

The SMS-43 MU stand is an auxiliary device for manual drilling machines (electrical and battery-offs with a 43 mm seam plant with a sewage diameter).The stand is designed for convenient drilling holes to a given depth at an angle of ± 45º to the working surface.

It is used as a means of fixing and insurance of a car raised on a lift to perform repair work, as well as for the installation of dismissal elements and other units. A large range of vertical movement, low weight and compactness provide led.

Star for drilling machines (later on the text. “stand”) is a stationary device for attaching machines of manual drilling electric ones, having a sewage diameter of 43 mm. Using the rack allows you to perform drilling work on metal, d.

Compact studio stand for exit filming. With its fairly small dimensions, it is able to withstand a load of up to 5 kg of Fujimi FJ8701 made of high.quality aluminum alloy. Differs in strength, lightness and compactness. The presented model l.

The stand for grinding machines is a stationary device for attaching machines grinding angular (mush 115/125/150) with a nominal diameter of the grinding of a grinding circle from 115 mm to 150 mm inclusive. Using the rack allows you to quickly and precisely p.

Purpose: for a drill rack height 400 mm

The stand for grinding machines S-125 is a stationary device for attaching machines grinding corner with a nominal diameter of the grinding cut circle from 115 mm to 150 mm inclusive.Using the rack allows you to quickly and accurately perform a cut.

Chips on the choice

During the selection of an auxiliary device for the “corner grinding”, it is worth first of all to decide on the issue of compatibility of the rack with the diameter of the disks, which works angular grind. It is important that the entire constructive of the rack is completely compatible with the available tool for cutting and grinding. Therefore, you can go for a purchase with an operated unit. As practice shows, are especially effective while working with ceramics, wood or metal of the pendulum type rack, with which you can realize a large range of tasks, in addition, they are quite simple in design and operation.

The entire lineup presented on the market has similar functions and capabilities, therefore, during the selection, it is worth making an Accent on the strength of the design, consumer reviews about the selected model, as well as the reliability of products, since low.quality goods can lead to the failure of the main cutting equipment, as well as damage to working workpieces or designs.

How to apply?

Since the “corner grinder” is a multifunctional tool that can be processed not only by metal alloys, but also by polymers, ceramics and wood, as well as a strong raw material (concrete, brick or stone), it is important to properly operate equipment. As for the joint performance of work with a counter, it is important to use only high.quality and serviceable cutting discs in the work, on which the result of the planned work will depend.

The corner grinder itself should be as reliably attached to the rack. this moment must be controlled before each launch of the unit. In this form, the “corner grinder” turns into a stationary circular saw. Similarly, all working blanks for cutting are served to it. During manipulations with materials, the operator must keep the tool without distortions. A blocking button deserves special attention, which does not need to be clamped after activating the equipment, since this can complicate an emergency shutdown if necessary.

While working with an electric “corner grinding” on the rack, you should reliably fix the network cord from the unit using plastic latches, since its free location on the floor surface can lead to a traumatic situation during the operation of the tool and the movements of the operator with materials and blanks. Fastening is best carried out to the mobile part of the bed.

The master should take care of personal safety during the use of the tool, so the presence of glasses and gloves to protect the eyes and skin is a mandatory requirement for operation angular grinder with a counter. Before starting, you need to perform a visual inspection of the cutting circle for defects.

Watch how to make a stand for a corner grinder with your own hands, watch in the next video.