The better to cut the barbed wire. Popular manufacturers

All about the installation of barbed wire

Protection from thieves and hooligans, from other attackers is usually associated with locks and gates, with cameras and dogs, with alarm, finally. But it is equally important to know everything about the installation of barbed wire. This “old.fashioned” and “non.casual” design will easily give a start to other ultramodern solutions.

Features of installation

There are a significant amount of varieties of barbed wire. But all of them must be installed so that the maximum level of security is provided. Ribbon structures are mounted in conjunction with other protective structures. You can see them both on the main frames and on the supports. As for the classic version (single.axial wire), it is used both as part of other fences and autonomously from them.

There are no special difficulties during work. Vertical supports are used for installation. The distances between them should not be more than 3 m. precisely, sometimes it is increased, but it should be done by professionals. Additional pulling of the wire helps to strengthen the degree of protection, which must be placed at right angles to the main restraint line.

It is more difficult to put the enclosing elements of the strip type.

The installation of them requires rather complicated devices. In practice, these products are used only in strengthening ready.made protective lines. Twisted Axl tapes are in demand mainly on the upper contours of the fences. But with their help, the restraint of naughty, prone to shoots and aggressive actions of animals also ensure their help.

Features of barbed wire

Like any material, the studded thread has its own characteristics. There are several of them:

• Spiral spikes are located evenly in the entire length.
• It is divided into several separate sections that may differ from each other in spike configuration.
• With the help of a studded spiral, most often installed inexpensive fences with their own hands, which will protect the territory from unauthorized penetration.
• The degree of effectiveness of such fences is much higher than that of standard fences.
• Fencing from barbed wire can be installed on an existing hedge.
• She first appeared in the USA in the 19th century. It was installed on large pastures to prevent theft of cattle from the territory of the farmer.
• The fence from the barbed spiral even at that time was cheaper than, for example, the installation of a wooden fence.
• There is nothing complicated in the installation of the design, so it can be installed on its own.
• Support for fence made of barbed wire can be either wooden and metal. If you process the second option with special compounds from corrosion, then it will last much longer than the first.
• It is almost impossible to overcome this obstacle without getting an injury.

Read also: What are the roller shutters from

Both the house and the territory around it need protection, so they choose a prickly spiral for fencing.

Configuration

Rabitsa also has a different configuration of cells: square, rectangular and diamond.shaped, as shown in the photo. Holes size 2, 5 cm. 6 cm. The choice of the grid depends on what purpose it will be used.

Usually, it is used to create a metal fence in private areas. How to make a brick fence with your own hands? Today we will tell you how to make a wire fence: we save on rabits.

The rabid grid can be set in two ways. Pull it on the columns and make sections. The first way is very simple, but the second will make the fence a stylish.

In both cases, you can create a fence from this material with your own hands. The popularity of rabits can be explained not by great cost and good properties.

What fences are installed on

“Egoza” can be installed on any design, but, for example, fences from a wooden picket fence and other easily damaged structures are rarely supplemented with barbed wire from above. How to make fences for beds with your own hands? In such cases, it is often attached to the outside of the fences or laid on the ground.

On top of the safety barrier is most often installed on fences that are easier to climb than to break. Especially relevant is the attachment of “Egor” on a concrete fence or other capital structure.

note! There are a large number of ways to protect the fence from corrugated board or other material using the barbed wire of “Euguz”. On the diagram below you will find the most popular installation options.

Excursion into history

For the first time, a new method of fencing territories, in which a thin and flat steel hot wire should be used, was invented in France back in 1860. After only five years, the “thorns” with rhomboid teeth became patented goods. But then it was used extremely rarely.

The changes occurred in 1872 after the American presentation by the American Roose of the wire fence made of small boards, to which the segments with acute wire have screwed. The fence was shown to farmers of Illinois. Many tried to improve the design shown, but Joseph Glidden and Isaac Elvud did best. Their product gained popularity, and the company, founded by partners, produced in 1875 about 270 tons of finished products.

By 1900, there were no longer farms in the United States, on which animal corrals were not protected by fences of such a plan. the “thorn” reliably guarded cattle. In addition, the fence was cheap, which was also a huge impetus for the development of American livestock breeding.

How to make a barbed wire?

To arrange an impassable fence in a summer cottage, you can weave several meters of “bites” of the hedge yourself. The expensive barbed wire “Egoza” requires the use of blanks from the strip, but you can do with a cheaper option in which the spikes are wound from pieces of wire. Instructions for the manufacture of such a fence are extremely simple:

• As a basis, a strong one-core wire with a diameter of up to 2.5-3 mm is used as a basis.
• Two veins of the desired length are twisted with each other to obtain the base in the form of a thick pigtail.
• Chisel rabbits with a chisel of workpieces for spikes up to 15 cm long.
• Find a section of the corner with shelves from 20 mm.
• We drill a hole in one shelf with a diameter more than two diameters of the wire used.
• Clound the corner in a vice.
• We fold two blanks for spikes together, shifting them a little along the length.
• Put the blanks in the hole and with the help of the tube we wind them on the main core.
• At the end of the spikes, they should stick out on the barbed wire out of both sides.
• We continue to wind the spikes on the base at equal intervals.

Installation of barbed wire

A spiked hedge can be fixed on top of the main or used independently in the form of a spiral fence right on the ground. Even having solved the question of how to eat barbed wire with powerful ticks or scissors, attackers will need to cut it in several places at once to form a safe passage. For installation of the fence, brackets of the following varieties are used:

How to pull a barbed wire?

Installation is carried out extremely neatly and necessarily in strong protective clothing. A spitting wire fence in the form of a spiral barrier is installed according to the following technology:

• We fasten the brackets to the main fence with welding or bolts.
• We pull with a winch a broach of a powerful wire to prevent sagging “thorns”.
• We fasten a spiral barrier with a step of at least 5-6 turns per linear meter.
• The prickly wire on the fence is fixed with ticks and brackets to the brackets and length.

Installation of prickly fencing on a normal fence

The easiest way to protect your site is by installing barbed wire on top of the finished fence. The shape and method of installation is determined by the features of the fence. Most often, special brackets are attached on the supports, which will hold the “spine”.

You will need to install a protective device for a fence with your own hands:

How to make a protective layer over the finished fence? To do this, you must weld the bracket to each pillar. The tape is stretched to the necessary condition and fixed to the welded elements using metal brackets.

How to fix the “thorns” so that it does not sag over time? To do this, inside the wire rings, the string is threaded, pulling it between the brackets. It should take place at an altitude of 30-50 mm from the upper edge of the fence. The string is attached with brackets, pulling it all the way. Then distribute a spiral studded tape around the string, finally forming its density.

Attention: installation of a protective hedge should be carried out in a special glove and dense clothes.

The prickly wire “Egoza

“Egoza” is a common.scale trade name for reinforced barbed tape (AKL, ASKL) and products from it.

What is the difference between the barbed wire of “Evza” and the traditional “thorns”?

Ordinary barbed wire is a metal thread with sharp spikes. “Egoza” has a more complex design: it is a cable wire (core), around which a steel tape with sharp piercing-cutting blades-chips are entwined or squeezed.

A reinforced tape is able to inflict much greater damage to the pest, animal or easy vehicle when trying to overcome it. The usual “thorns” is more often used in everyday life, in small areas.

The prickly wire “Egoza” is often used to protect territories in need of more reliable protection: institutions of the penitentiary system, military facilities, regime industrial zones, etc.)

Why “Egoza”?

In the early 80s of the last century, a barrage, prickly tape, the first in the Soviet Union, was developed here. The scientific project was called “Eight”.

Subsequently, almost all the thorny barriers made of reinforced tape made in the country began to be called so.

Types and features of the use of barbed wire “Eskoza”

• In a professional environment, the following abbreviations are used to designate products of the Eskoza type: AKL, ASKL, SBB, PBB.
• AKL (reinforced prickly tape)-a stamped steel tape with symmetrical blades-ships, squeezed around the wire.
• ASCL (reinforced twisted barbed tape)-barbed tape with bidows-ships, entwined around the reinforcing wire.

PBB (flat safety barrier). is made from AKL or ASKL.

The prickly tape is laid in rings in the form of a flat spiral, the rings are fixed with each other by steel brackets.

Flat barriers are actively used as protective barriers in places where the use of voluminous barriers is difficult due to risks of accidental injury of passers-by. For example, when installing on fences in the city zone.

SBB (spiral barrier). also made from AKL or ASKL. Is a voluminous spiral of barbed tape, the turns of which are fastened with brackets. As a means of physical protection of the territory, it demonstrates much greater efficiency than the PBB has a more frightening look. It is extremely difficult to overcome or destroy such a fence.

By type of use, spiral barriers are divided into stationary and mobile. Stationary can be mounted on the roofs and visors of buildings, between supports, along the upper border of fences and fences, etc. Mobile barriers are usually a design of a spiral, the ends of which are attached to the frames (frames) with handles for carrying.

Where to buy the prickly wire “Egoza”?

We advise you to purchase an “Egoza” directly from the manufacturer. This guarantees a wide selection of products and the most acceptable prices.

• In the Teplostal Group of Companies, you can buy SBB “Egoza”, PBB “EGOZA” as well as ASKL.
• In the production of these products, we use high.quality materials from trusted manufacturers:
• – spring (GOST 9389, brand 65g) or galvanized wire 2.5 mm (for the base);
• -galvanized tape (GOSTs 3559-75, 14918-80) (for blade-ships);
• galvanized wire 3mm or galvanized tape 10×1.5 mm (for brackets);
• The service life of the barbed wire “Egoza” from the galvanized materials exceeds 20 years.

We make spiral barriers with a diameter of 450 to 900 mm, flat barriers with a diameter of 500 to 900 mm. The most popular and universal position is the prickly wire “Evza” 500 (SBB 500).

Barriers are sold by bays with a recommended stretch length from 7 to 9 meters. The barrier stretched to this length provides maximum efficiency.

Also on sale there are brackets for attaching spiral barriers of safety of different diameters.

We sell the prickly wire “Egoza” by any volume and deliver the scope of the barbed wire “EGOZ throughout and the scope

A reinforced barbed tape (AKL) of the EGOZ is a galvanized tape 0.55 mm thick, which has a profile of double.edged, symmetrically located spikes with cutting edges, squeezed around a galvanized steel cable wire with a diameter of 2.5 mm. Step of a teeth 36 mm.

The exclusive feature of the reinforced barbed tape (AKL) manufactured by our enterprise-the cutting elements after compression are located not in one plane, but V-shaped, at an angle of 110-140 degrees. This greatly increases the striking ability of products from this type of AKL.

Reinforced twisted prickly ribbon (ASKL)

A reinforced twisted barbed ribbon (ASKL) of the EGOZ is a galvanized tape 0.55 mm thick, which has a profile of mutual, symmetrically located spikes with cutting edges, is “twisted” around a galvanized wire with a diameter of 2.5 mm. Step of a teeth 36 mm. The cutting edges are directed in all directions, due to which the tape looks more fluffy and menacing.

Spiral barrier of security (SBB) Eleza

A spiral barrier of security (SBB) of EGOZ is a spiral structure made of reinforced barbed tape.

The EGOZ spiral can be made both from the reinforced barbed AKL tape and from the reinforced twisted barbed ASKL tape. The turns of the spiral are interconnected by straping (crossing), special brackets made of galvanized steel 1 thick.

5 mm and 10 mm long, brackets are installed in a checkerboard pattern, rows along the axis of rotation of the spiral. In total, 5 rows are installed, equidistant from each other, due to which it will be confused by a difficult, springy, spatial structure.

The striking effect of both types of SBB is approximately the same. The most important feature of SBB is that its design is able to maintain its protective properties after snacking in one and even several places.

The high barrage properties of the Egza and other many advantages of SBB allow it to be used to create effective fences around various objects of civil, military and special purposes.

Flat barrier of security (PBB) Eleza

The flat barrier of security (PBB) is its depravation of a flat, spiral structure of reinforced barbed tape, the turns of which, as well as that of SBB, are fastened with each other with the help of brackets from galvanized steel.

The barracks of the flat fence is very high, although slightly lower than that of the spiral barrier (SBB).

PBB, like SBB, is able to maintain its barrage properties after one or even several snacks in different places.

A significant feature of the PBB is that, being a flat structure, it does not go beyond the dimensions of the fence, has a less aggressive appearance, which is more preferable when creating fences in crowded places.

Flat prickly ribbon fencing (PKLZ)

• Flat prickly ribbon fencing (PKLZ) from the reinforced barbed tape Akl Euguz, with rhombs form.
• rhombus is lowered in the form of a canvas with a height of 2000 mm 4000 mm wide and has cells in the form of rhombuses with a line of 242 mm, rhombus height. about 450 mm, rhombine width. 190 mm. PKLZ
• In the vertices of the rhombus, they are connected by galvanized steel brackets, similar brackets used in the manufacture of a spiral barrier of security of Ears.

It is possible to supply PKLZ in frames from steel profile pipes or steel corner.

A single canvas 2000-4000 is supplied in a roll 2000 with a diameter up to 400 mm.

PKLZ flat fence is highly resistant to overcoming and has an aesthetic appearance. It is possible to use PKLZ painted in camouflage, as an inconspicuous obstacle in the stripes of alienation between two lines of fence.

At the request of the consumer, it is possible to manufacture PKLZ 2000-4000-ASKL, where the reinforced prickly tape of the AKL is replaced by a reinforced twisted barbed tape. In this case, the effect of “fluffiness or volume” is created. this increases the threatening type of PKLZ.

Application of the Exto

The high protective properties of the barbed wire of the Eskoz and other advantages of the AKL, SBB, PBB and PKLZ allow them to be used to create effective fences around various objects of civil, military and other purposes.

Such objects include, for example: territories of industrial and agricultural enterprises, power plants, airports, warehouses, cottages, sections of the state border, facilities of the Ministry of Defense, the Ministry of Internal Affairs, the Uin, other power and special departments.

AKL, SBB, PBB and PKLZ can be used to create fences of various heights, width and density, both directly on the ground and on the surface of various structures: on the roofs and walls of buildings, in the form of visors. on fences of stone, wood, concrete. metal, at the gate, etc.P.

The serious advantage of the fences of the AKL, SBB, PBB and PKLZ is their transparency, which ensures the possibility of observing the zone adjacent to the perimeter of the fence, the timely detection of the attacker, and if necessary and fiery and fiery.

For the most reliable protection of the perimeters of objects, a combination of fences made using AKL, SBB, PBB and PKLZ is recommended. with technical means of protection and video surveillance.

The prickly cutting tape fence of the Euguz is used to arrange engineering barriers in order to difficulty overcoming the line when the intruder penetrates the protected object. Various options for using this product are possible, both independently and together with technical means of protection of perimeters.

• A spiral barrier of safety (barbed wire) is used to make barriers in order to difficulty overcoming by violators of the forbidden zones of the following types of objects:
• – territories of enterprises;
• – territories of bases and warehouses;
• – territories of nuclear power plants;
• – territories of hydroelectric power plants, GRES, TPP,
• – gas supply and gas distribution facilities;
• – facilities of the Ministry of Defense;
• – objects of the Ministry of Internal Affairs, Uin;
• – territories of mining;
• – water protection and environmental enterprises, border sections of the Federation;
• – other objects requiring the creation of a secure perimeter.
• A thorny-cutting tape fence of an excitement can be used in various ways:
• – a visor in the form of a spiral AKL on the fence or roof of the building;
• – visor from the AKL tape on the fence and roof of the building;
• – fence on supporting supports in the form of an acl spiral at one, two and three levels;
• – fence on load.bearing (reinforced concrete or metal) supports in the form of AKL tape stretched after 10. 15 centimeters;
• – rapidly unfolding mobile engineering fence at one, two and three levels (without supporting supports).

Prilute wire: features, types and manufacturing, installation rules

For the first time, a new method of fencing territories, in which a thin and flat steel hot wire should be used, was invented in France back in 1860. After only five years, the “thorns” with rhomboid teeth became patented goods. But then it was used extremely rarely.

The changes occurred in 1872 after the American presentation by the American Roose of the wire fence made of small boards, to which the segments with acute wire have screwed. The fence was shown to farmers of Illinois.

Many tried to improve the design shown, but Joseph Glidden and Isaac Elvud did best.

Their product gained popularity, and the company, founded by partners, produced in 1875 about 270 tons of finished products.

By 1900, there were no longer farms in the United States, on which animal corrals were not protected by fences of such a plan. the “thorn” reliably guarded cattle. In addition, the fence was cheap, which was also a huge impetus for the development of American livestock breeding.

The main types of barbed wire

Nowadays, it is customary to divide it into three groups:

Standard “thread” with one base is a barbed galvanized wire that is made in our country in accordance with the state standard 285–69. The diameter is 2.8 millimeters. The material is characterized by low price and lightness.

For installation work, you will need vertical poles (supports), which are dug into the ground, and between them they stretch the “spine-thread”. The permissible distance between the supports should not exceed three meters, otherwise the wires may sag. Experts recommend additional reinforcement, pulling another “thread” across the main.

Installation can be carried out both at an angle and in vertical order, the essence remains unchanged:

• Pillars are dug into the ground (if the length of the fences is insignificant, the supports can not be concrete);
• Through welding, segments of corners of metal or reinforcement are attached to the pillars, and “Gyurza” or “Egoza” is attached to them.

It is worth noting that “threads” can be used as a decorative decoration of low hedges and flower beds. Small segments can be painted in different colors, creating an unusual landscape design.

“Thread” is the most common variety of “thorns”. It is used in areas with a small area. On large objects, wires made of reinforced tapes are used. Fences from such materials can be as follows:

• flat fences (safety barrier) in the form of flat spirals;
• grids with rhombo.like cells;
• mobile barriers made of voluminous spirals;
• fences with different sections of volumetric spirals;
• prickly spikes mounted on fences.

The reinforced barbed tape “Egoza” is also made of galvanized material, but covered with an additional layer of material. Two.component material costs more than ordinary “threads”, is characterized by increased strength.

Installation is impossible without special devices and tools. In particular, you will need a grinding machine or corner grinder, as well as special reinforcing scissors. Therefore, it is advisable to use the tape as an additional strengthening element.

The twisted tape helps to protect the upper part of the fences. From it you can make barriers from animals by laying the tapes with waves on the ground.

When laying and editing, you should adhere to safety rules: work in protective clothes and gloves, use suitable tools, since “Egoza” often spring in the most inappropriate minutes, which is fraught with injuries.

Production process

The manufacturing method depends on the type of “thorns”. For example, the barbed tape is released by stamping of metal rolling sheets, steel scraps, profile residues. And the “threads” are made of galvanized wire. Thorns are made for them from the same material, giving the pieces a pointed shape and winding them on the base.

Most efforts and finances are spent on the production of twisted wires. The fact is that at the initial stage they make ordinary “threads”, then twisted using a special machine. Such wire is characterized by increased protective characteristics of future fences due to enhanced technical parameters.

All types of barbed wire, characteristics and features of application

Each in their own way mounts and uses fences made of barbed wire. The only transfer of existing engineering solutions will take a lot of space. But whether everyone knows that the wire itself, as a product, is produced in a rather large assortment? We will figure out what its varieties are on the market and where it is more advisable to use.

Types of barbed wire

Traditional, most famous performance. The basis is “galvanizing” with a cross section of 2.5 (maximum) to 2.8 mm, on which twisting twists are located with a certain interval. GOST allows the production of steel wires without a protective coating (the cheapest and most short.lived version).

Varieties in design

The same applies to spikes. They can be wound from both one and two segments folded together or the same or other cross.section of the wire, including stamped samples. The latter increase the protective properties of the fence.

By elasticity

• Elastic. stronger and thinner in cross section, more inert in relation to temperature changes and mechanical influences, therefore it is used in the installation of large spans (sections) of the fence.
• Soft. as the name implies, such barbed wire is more malleable and convenient in mounting. But this property is a minus, since with a large length of the thread it is sagged over time. Therefore, such a variety of thorns is used to arrange relatively small sections (tension on small.sized frames).

Ribbon

Prickly cutting men. In fact, this is a product on which strip iron with sharp segments plays the role of spikes, packed around the thread (wire). AKL (“EGOZA”). The older option is the winding around the core (veins). ASKL.

Reinforced “Twist”

This “thorns” is a thin strip of steel with a certain, changing profile along the entire length. The edges of the tape are unusually sharp, almost this is an analogue of razor.

Everything else, for example, protective barriers. nothing more than designs (technical solutions), made on the basis of one of the varieties of “spines”.

What is barbed wire?

The well.known “spike” is made of metal threads or narrow stripes, on which sharp elements are fixed through certain gaps. Such a fence does not look quite presentable, but it does not allow painlessly penetrating into a closed area. Often these fences are used on farms, to protect remote cottages, fields, gardens, industrial facilities.

• The prickly wire serves up to 20 years;
• excellent light permeability;
• reliability;
• simple installation;
• relative cheapness;
• Universality.

Who came up with a barbed wire?

Back in the 1860s, the French inventor of Louis Francois Janin is patented by a double wicker wire with rhomboid teeth. In parallel with him, a similar invention was developed in America, where developing animal husbandry required the manufacture of effective but cheap fences for livestock. In 1874, Henry Rose will patent a variety of barbed wire, which used planks with pointed elements.

A more advanced wire with spikes is invented by the American Joseph F. Glidden. In his version, thorny spikes were wound from metal threads. The studded elements were firmly fixed on the main wire and did not shift during installation. Relatively quickly unusual in appearance, products gained fame, in a quarter century by 1900 its production increased to 1,50,000 tons/year.

The design of barbed wire

In the traditional performance, this product is a long section with a cross-section of mainly 2.5-2.8 mm, around which sharp elements are wound through certain intervals. Cheap wire with spines of simple steel is short.lived, it rusts relatively quickly in the air. The main thread is mainly made of two veins intertwined into a pigtail with a galvanized coating. The thorns themselves are made from several segments of the wire or obtained by stamping.

Types of barbed wire

A relatively simple product was gradually improved in order to strengthen the protective characteristics. Instead of black iron, galvanized barbed wire began to be used, twisted spikes began to replace with pointed hooks made of sheet steel. There are the following varieties of such fences:

To arrange an impassable fence in a summer cottage, you can weave several meters of “bites” of the hedge yourself. The expensive barbed wire “Egoza” requires the use of blanks from the strip, but you can do with a cheaper option in which the spikes are wound from pieces of wire. Instructions for the manufacture of such a fence are extremely simple:

• As a basis, a strong one-core wire with a diameter of up to 2.5-3 mm is used as a basis.
• Two veins of the desired length are twisted with each other to obtain the base in the form of a thick pigtail.
• Chisel rabbits with a chisel of workpieces for spikes up to 15 cm long.
• Find a section of the corner with shelves from 20 mm.
• We drill a hole in one shelf with a diameter more than two diameters of the wire used.
• Clound the corner in a vice.
• We fold two blanks for spikes together, shifting them a little along the length.
• Put the blanks in the hole and with the help of the tube we wind them on the main core.
• At the end of the spikes, they should stick out on the barbed wire out of both sides.
• We continue to wind the spikes on the base at equal intervals.

Installation of barbed wire

A spiked hedge can be fixed on top of the main or used independently in the form of a spiral fence right on the ground. Even having solved the question of how to eat barbed wire with powerful ticks or scissors, attackers will need to cut it in several places at once to form a safe passage. For installation of the fence, brackets of the following varieties are used:

How to pull a barbed wire?

Installation is carried out extremely neatly and necessarily in strong protective clothing. A spitting wire fence in the form of a spiral barrier is installed according to the following technology:

• We fasten the brackets to the main fence with welding or bolts.
• We pull with a winch a broach of a powerful wire to prevent sagging “thorns”.
• We fasten a spiral barrier with a step of at least 5-6 turns per linear meter.
• The prickly wire on the fence is fixed with ticks and brackets to the brackets and length.

Concrete paint allows you to extend the service life of the surface, protect it from exposure to aggressive environmental factors and give a more decorative look. There are different modifications that differ in price and operational characteristics.

It is important to use insulation for pipes in the process of laying communication systems, thus, protection is created from the external influence of the environment. Thermal insulation materials presented on the market do this perfectly.

Granite paving stones. products that are used for paving pedestrian paths and roads for a long time. The naturalness of the material and density allow, using it once, to enjoy the result of several generations.

Rust paint saves time and effort when decorating metal surfaces. It blocks the spread of corrosion, protects against moisture and temperature changes. There are several varieties that differ in the composition and method of application.

Peculiarities

The prickly wire “Egoza” is a type of protective fence produced by the same name brand. The Chelyabinsk plant at which it is produced is part of the group of companies LLC Russian Strategy. Among its customers are state structures, atomic, thermal, electric energy, and the Ministry of Internal Affairs and Sun, when developing wire, specialists of the EGOZ perimeter fencing plant take into account the level of responsibility in the protection of objects of special significance and the needs of ordinary citizens who want to provide reliable protection of their sections.

The prickly wire manufactured according to the standard GOST 285-69 is the simplest, suitable only for horizontal tension.

Flat strip structures have a more diverse technical characteristics. So, for the products of “Egoza” a spiral with a pentacle fastening of the AKL type mass, depending on its diameter, is from 4 to 10 kg. The weight of 1 meter is easy to calculate based on the length of the skein. normally it is 15 m.

The manufacturer produces several types of wire of the Eskoza brand. All products have common features: manufacturing from steel or galvanized tape, the presence of sharp spikes. All varieties have high strength and reliability, have a long service life, can be mounted both around the perimeter of existing fences and independently, based on poles.

The main purpose of the Eskoza wire is the protection of objects from unauthorized penetration. It is used at the cattle grazing sites to prevent or stop the animal’s movement outside the dedicated zone. At industrial, military, secret, protected facilities, in water protection and environmental zones, in places with limited access, prickly wire acts as a barrier barrier, allowing not to block visibility and access for natural light, as in the case of continuous fences.

Depending on the type of product, its installation can be carried out in different ways. Most often, such a wire is used for:

• creation of fences around the perimeter of roofs;
• fixations on vertical racks (in several levels);
• installations on supports with a tension horizontal string of 10-15 sections;
• Laying on the ground (quick deployment).

All these features make barbed wire in a demanded solution for use on objects of different types.

Review of species

Called “Egoza” today produces several types of products. All of them have different external data and characteristics. The easiest type is wire or threaded, looks like a steel cord. It can be homogeneous, with an inextricable plexus of elements in the bay and pointed spikes directed to the sides. The corrugated wire of this type is woven in the form of a “pigtail”, which increases its strength characteristics, the number of spikes and lived doubled.

In composition

Thorny wire is not only rounded. it can be performed in the form of a tape. Such “ears” has a flat structure, the spikes are located along its edge. Since the strip wire is made of a galvanized metal strip, it is quite easily cut with special tools. This greatly limits its independent application.

The most popular combined products in which the protective properties of wire (round section) and strip elements are connected.

They are divided into 2 categories.

• Askl. Reinforced tape twisted and entwined around wire reinforcement. This type is quite popular, but not too reliable. it is easy to dismantle it, freeing the passage. The number of spikes in this case increases, outwardly the fence looks pretty impressive.
• AKL. The prickly reinforced tape in this performance turns and is covered in a longitudinal direction on a flexible core basis. The design is resistant to mechanical damage, strong and durable. Standard tape thickness 0.55 mm, the profile is equipped with mutual and symmetrical spikes.

It is worth considering that according to the standard of the Enges type wire should be made exclusively from galvanized wire and tape of installed samples. The diameter of the core is installed in the amount of 2.5 mm. The thickness of the tape in combined products varies in the range from 0.5 to 0.55 mm.

By the degree of stiffness

Given this characteristic of barbed wire, you can distinguish 2 main categories.

• Elastic. It provides a high level of strength and stiffness of the material. This variety is designed to create long.span fences.
• Soft. Annealed wire is used for its manufacture. It is very flexible, easily takes the right direction. It is convenient to work with such material when installing complex in shape, short sections of the fence. Soft wire “Egoza” is easy to use in everyday life.

Rigidity. an important parameter that affects the stability of the wire structure to damage. That is why its indicators should not be ignored.

Voluminous and flat

The prickly wire “Egoza” AKL and ASKL has a strip type of structure. But under this brand, volumetric and flat fences are also produced. They allow you to quickly deploy the design on the ground, block significant areas on any type of terrain. Here are the most popular options.

• SBB (spiral barrier). The volumetric structure is made of AKL or ASKL wire by hanging with brackets connecting in a checkerboard pattern in 3-5 rows. The finished fence is springy, elastic, voluminous and difficult to overcome. It is almost impossible to extend or eat it with tools.
• PBB (flat safety barrier). This type of product has a spiral structure, flattened, with turns fastened with each other brackets. The flat structure is easily mounted on pillars of 2-3 rows, without going beyond the total limits of the fence, looks more neutral, better suitable for installation in public places.
• PKLZ. A flat type of strip fencing, in which the wire is laid diagonally in rows, similarly to the cells. The peaks of rhombuses formed from AKL are fastened with steel brackets with galvanized coating. The canvas is produced in pieces of 2000 × 4000 mm. The finished fence is reliable, resistant to force.

This classification helps easily and quickly decide on the type of product that is most complied by certain safety requirements.

Where it is installed?

The prickly wire can often be seen on top of the fences around the cottages, a country or even a city house. But it is still actively used for fences around pastures, corns. And also the thorny wire is mounted:

• around prisons;
• at military facilities;
• at stations and stations;
• at airports;
• at service airfields;
• in warehouses;
• at retail facilities;
• at industrial enterprises;
• In the ports.

Installation rules

The fastening of vertical supports dug into the ground is carried out with no more than 3 m steps. These supports are enough to install the wire itself, nothing else will be required. But an increase in the degree of security is possible only with additional tension of the wire in the transverse plane in relation to the main lane. The prickly thread can be used in addition to the already created protective structures. In this case, it is mounted on top of the fences and gate.

The reinforced tape is mounted much more complicated. You will need to install it:

• scissors for cutting metal reinforcement;
• Grinder;
• some other tools depends on the method of attaching the wire at the reference points.

Installation of the Eskoza wire will be simplified when using special brackets. For flat and spiral models, the same type of brackets can be used. Mount them permissible in a variety of places. Now they sell crochet different formats:

Independently prepare a fence with a step between brackets of not more than 2.5-3 m. You need to work not only in protective gloves, but also in tight clothes. Sometimes it makes sense to even wear goggles. The shape of the bracket is selected taking into account the convenience of installation. Prior to the start of work, the territory should be marked.

The reference points are fixed using bolts or welding method. Then the spiral is mounted on crochet on top using special brackets. The next step is to pull the double string along the entire length of the spiral. The spiral itself is aligned, and fix it using twisting a special sample.

At the end, certain parts of the wire fence are connected using mounting brackets. If the fence is energized, this must be warned by hanging special signs around the perimeter with a clear preventive text.