What Saws Are Used For Sawing Plywood
Joinery. Tests.
1. What is the name of the site with the equipment installed on it?
1. Workplace;
2. A place to work;
3. A place to practice.
2. What is equipped with a student’s workplace in a carpentry workshop?
1. Workwear, tools, materials;
2. Carpentry workbench, necessary materials and tools;
3. Carpentry workbench, workwear and materials.
3. What requirements must be met while in the workplace?
1. Carefully treats materials and tools;
2. Keep the carpentry bench clean and tidy;
3. Keep clean, carefully treat equipment and tools.
4. What equipment is available at the workplace in the carpentry workshop?
1. Joiner’s workbench;
2. A set of tools;
3. A set of materials.
5. What material are the products made in the carpentry workshop;
3. Made of wood and metal.
6. What is obtained from logs during longitudinal sawing?
7. What is hardness like wood?
3. Hard and soft.
8. What do you know conifers?
1. Pine, oak, fir;
2. Spruce, pine, birch;
3. Spruce, pine, fir.
9. What is the hardness of coniferous wood?
3. Hard and soft.
10. On which section of a tree trunk are fully annual rings visible?
1. Tangential;
2. On the cross;
3. On the radial.
11. What is the name of the natural pattern on the treated wood surface?
1. Core rays;
12. What are the characteristics of wood?
1. By color, smell, texture, and hardness;
2. The color of the kernel, the shape of sapwood, texture;
3. By smell, growth rings, hardness.
13. Wood, which trees are hardwoods?
1. Spruce, aspen, pine, linden;
2. Oak, pine, beech, hornbeam;
3. Oak, birch, beech, hornbeam.
14. Wood, which trees are soft species?
1. Spruce, aspen, pine, linden;
2. Oak, pine, beech, hornbeam;
3. Oak, birch, beech, hornbeam.
15. What wood defects are most common?
1. Damage during harvesting and sorting, knots;
2. Knots, cracks, structural defects of wood;
3. Defects in the structure of wood and damage during transportation.
16. What are the names of mechanical damage to wood during harvesting, transportation and processing;
17. How are lumber divided by shape and size?
1. Bars, boards, slab;
2. Bars, boards, slabs slab;
3. Bars, boards, bars.
18. What are the main parts of a joiner’s workbench?
1. Covers and undercovers;
2. The tray and the underlay;
3. Covers and tray.
19. What parts does the cover of a joiner’s workbench consist of?
1. Workbench, tray, underlay;
2. A bench with holes, a tray, two clamps;
3. The tray, two clamps and underwire.
20. What are the holes in the covers of the bench for?
1. To facilitate the cover;
2. To fix the workpiece;
3. To install wedges.
21. What tool is used for planing?
1. Sherbel, planer;
22. What are the main parts of a planer?
1. Horn, block and cutter (knife);
2. Horn, block, cutter (knife) and wedge;
3. Wedge, block and horn.
23. What material is a planer cutter (knife) made of?
24. What needs to be done by the student before starting planing?
1. Check the correct installation of the planer or sherbel;
2. Decompose the tool correctly;
3. Prepare the workplace.
25. What is the name of the piece of wood from which the parts are made?
26. Which hand should I take a plane for a horn?
3. Right or left.
27. How does the size of the cutter (knife) of the planer depend on the hardness of the wood?
1. If the wood is soft, the cutter is released more, if hard. Less;
2. The release of the cutter does not depend on the hardness of the wood;
3. The output of the cutter for soft wood is 2. 3mm.
28. What determines the ease of work and the quality of planing?
1. From the carpentry workbench and working pose;
2. From a working pose and an established planer;
3. From a planer and a joiner’s workbench.
29. How should I stand at a joiner’s workbench when planing?
3. Nearby, half-turn.
30. What mechanical machines are used for planing wood?
31. What are the sinuses between the teeth of the saw?
1. For collecting and removing sawdust;
2. For the convenience of sharpening teeth;
3. For the convenience of tooth alignment.
32. What is the difference between saws of longitudinal, transverse and mixed sawing?
1. The shape of the teeth;
2. The size of the teeth;
3. View of the sharpening of the teeth.
33. What is the operation of cutting wood saw?
34. What is the common core of any saw?
2. A metal cloth with teeth;
35. What is the name of the cut formed by a saw in wood?
36. What shape does the cutting part of any saw have?
37. How are saws divided by tooth size?
1. On medium and large-tooth saws;
2. On small. Medium. And large-tooth saws;
3. Finely. And large saws.
38. What reduces the friction of the saw blade on wood during sawing?
1. Tooth setting;
3. Tooth inflow.
39. What are the notches between the teeth?
40. With which hand do you need to hold the workpiece when sawing?
3. Right and left.
41. When is it necessary to use a guide?
1. At the end of sawing;
2. In the process of sawing;
3. At the beginning of sawing.
42. What operation is called a wiring of a saw?
1. Alignment of the teeth in height;
2. Alternately bending the teeth in both directions;
3. Aligning the teeth in width;
43. What should be the rhythm of hand movements when sawing?
1. 30. 40 movements per minute;
2. 20. 25 movements per minute;
3. 45. 60 movements per minute.
44. Is the rhythm of hand movements the same during sawing?
1. At the beginning and end, the sawing rhythm is slow, and in the middle. Average;
2. The same rhythm during the whole sawing;
3. Arbitrary rhythm during the whole sawing.
45. Why can’t you keep your hand close to the saw blade when sawing?
1. Because the saw blade heats up;
2. Because it is not convenient to hold the workpiece;
3. Because the hand can be injured.
46. What saws are used for sawing plywood?
47. What tool is used for sawing wood?
2. Miter box and bedboard;
3. Backboard.
48. Worker, what profession does wood flooring lay on?
49. Worker, what profession do doors made of wood?
50. What is necessary to have for the manufacture of any product?
1. Tools, product samples;
2. Tools and materials;
3. Tools, materials, technical documentation.
51. Where is the information on the shape, size and material of the product?
1. In technological maps;
52. Where is the information on the manufacturing process of the product?
1. In technological maps;
53. What are the ultimate dimensions of the outlines of an object?
1. Length and width;
2. Overall dimensions;
3. Tall and long.
54. In what units of measurement are the dimensions shown in the drawings?
1. In millimeters;
2. In centimeters;
55. Is it always necessary to draw three views?
2. No, only two species;
3. You need so much that you can make the item.
56. Is it possible to make a part according to the drawing with one view?
2. It is possible, if the form is clear and there are all sizes;
3. It is possible if you draw a second view.
57. What is the name of the process of drawing on the surface of the workpiece the outlines of the future part?
58. What graphic document is the product made of?
1. According to drawings or sketches;
2. From photographs or technical drawings;
3. According to drawings or photographs.
59. What tools are used for marking?
1. Measuring ruler, awl, pencil;
2. Measuring ruler, joiner’s square, awl, pencil, surface gage;
3. Joiner’s square, awl, pencil.
60. What should be applied to the lines and risks on the workpiece when marking?
1. With an awl or a pencil;
61. What is the name of the surface of the workpiece from which measurements begin?
62. Where should I place tools when working on a carpentry bench?
1. On the bench cover;
2. In the workbench tray:
3. On the work bench.
63. What surface choose the base?
1. Evenly planed;
2. The correct form;
3. Smoothly and correctly planed.
64. Worker, what profession marks the part on the workpiece?
65. What should be the size of the workpiece?
1. dimensions of the part by the amount of the workpiece;
2. Equal dimensions of the part;
3. Any size.
66. What do you do with the workpiece after marking?
1. Saw and grind;
2. Sawing and planing;
3. Grind and plan.
67. What is the name of the part of the material that must be removed during processing?
2. Increase in size;
3. Stock of length and width.
68. What is the approximate allowance for planing a plane?
69. What are the shapes of curved contours cut out of plywood?
1. Hacksaw for mixed sawing;
2. A hacksaw for longitudinal sawing;
70. What is the approximate amount of allowance for one sawing?
1.4 ……… 5mm per cut;
2.810mm per cut;
3.1.1. 1.5mm per cut.
71. In the process, which operation can save more lumber?
1. When planing;
72. What is made of wood waste (sawdust and shavings)?
2. Wood boards;
73. What is the name of the product drawing, which consists of several parts?
1. Product drawing;
2. Assembly drawing;
3. Product sketch.
74. How many layers of wood has a planed veneer?
75. How many layers of veneer are plywood made of?
1. Of three or more;
2. Of two or more;
3. Of one or two.
76. What is veneered veneer used for?
1. For the manufacture of plates;
2. For furniture decoration;
3. For flooring.
77. Where is the sequence of the manufacturing process of the product part described?
3. In technological maps.
78. What is the process of manufacturing a part of a product called?
79. What is included in the routing?
1. Drawing details, work sequence, tools and fixtures;
2. Drawing details, work sequence, tools, materials and devices;
3. Drawing details, work sequence and tools.
80. What tool mark the circle.
81. What is the operation called the removal of small irregularities on the surface of a part made of wood?
3. Filing irregularities.
82. How to polish wood with a sandpaper?
1. Along the fibers;
2. Across the fibers;
3. At different angles of the fibers.
83. What parts does the sandpaper consist of?
1. Of the base, glue and grains;
2. From the base, material and grains;
3. Made of warp, glue and paper.
84. What is called burning out?
1. Burning products on an open fire;
2. Painting products in dark colors;
3. Application of various patterns to the product with highly heated wire.
85. How to prepare the surface of the workpiece for burning?
1. It is ground and cleaned;
2. It is cleaned, ground and a drawing is applied;
3. It is cleaned and the drawing is applied.
86. What tools clean the workpiece and plywood?
1. File and rasp;
2. A plane and a file;
3. File and sandpaper.
87. How do you finish cleaning the surface of the product?
1. Grinding with a coarse sandpaper;
2. Grinding with a fine-grained grinding sand;
3. Grinding with a sandpaper of any grain size.
88. How is the drawing applied to the workpiece?
2. Through oiled paper;
3. Through carbon paper.
89. What are joinery joints?
1. Motionless and one-piece;
2. Movable and detachable;
3. Detachable and one-piece.
90. Which of these compounds are one-piece?
1. Nails;
2. Connection with nails and glue;
3. Connecting parts with screws.
91. What is the assembly of products;
1. The connection of parts with nails;
2. Connecting parts to the product;
3. Connecting parts with screws.
92. How to pull bent nails out of wood?
1. Ticks and claw hammer;
93. What should be the length of the nails for joining wood parts?
1. 5.6 times the thickness of the part to be nailed;
2. 2.4 times the thickness of the part to be nailed;
3. 6.7 times the thickness of the part to be nailed.
95. How to mark a place for a screw on a part?
2. Prick with an awl;
3. Prick with an awl or drill.
96. How to fit the connected parts to each other?
3. Freely with a clearance of 1mm.
97. What adhesives glue wood parts?
1. Casein, rubber and synthetic adhesives;
2. Gluten, bone and synthetic adhesives;
3. Gluten, clerical or synthetic adhesives.
98. What glues are glutinous?
1. Cereal and casein;
2. Bone and bone;
4. Bone and casein.
99. What is fencing glue made of?
1. From the horns and hooves of animals;
2. From bones, horns and animal experience;
3. From waste tanneries.
100. How long does gluten glue last in water?