Which Saw To Choose Benzo Or Electric

What’s better. Chainsaw or chain saw Which is better than a chainsaw or a saw. Comparison of devices in various parameters and areas of application.

Power and performance

As already mentioned, the power of saw engines rarely exceeds 2.5 kW, while for chainsaws it can reach 5. 6 kW. But even a 2.5 kW saw cannot compare in performance with a gasoline of similar power. The fact is that the saw at an average load can work continuously for up to 40 minutes, after which it must be turned off for 20 minutes in order for the motor to cool down.

Chainsaws do not have this problem, if you do not take into account cheap household tools. Semi-professional and industrial ones do not require such stops and can work 8 hours a day practically without stopping. Time for refueling with fuel and oil does not count. This operation takes several minutes. It is worth considering that oil is also poured into the saws.

Chainsaw chain speed is 25. 30% higher than electric chain speed. Accordingly, productivity increases as well. Taking into account the possibility of quick movement of the operator with the chainsaw around the construction site or along the board or log, which is difficult for the saw due to the presence of a cable, productivity increases even more. If you compare a chainsaw and a saw of the same power, then the performance of a gasoline one is slightly higher.

What’s better. Chainsaw or chain saw

which saw to choose benzo or electric

Chainsaws are among the most common among woodworking tools. This is determined by their performance, compactness, and relatively low cost of consumables. In practice, only an endless toothed chain interacts with a tree, the resource of which is quite high, and only periodic sharpening is required from maintenance.

There are two types of chain saws. Gasoline and electric. The first set in motion the saw chain using a two-stroke gasoline air-cooled engine with a power of 1.5. 5 kW, the second. An electric motor with a power of up to 2.5 kW. If we compare the consumption of fuel and electricity, then for gasoline and saws, the cash costs for cutting 1 m 3 of material will be approximately the same.

READ  How To Sharpen Band Saws On Wood

But to determine which is better than a chainsaw or a saw, it is necessary based on a set of characteristics, and not just the cost of fuel or electricity. Purchase costs, maintenance, ergonomics, maintainability and ease of use are equally important factors influencing the choice.

Preparation and maintenance

Saws are more convenient when preparing for work. It is enough to install the saw headset, add oil and plug into the socket. At the same time, most quality saws are equipped with quick-release devices that allow you to tighten the chain or replace it in a few minutes.

Quick-release chain tensioner.

With chainsaws, this is more difficult. Semi-professional and professional saws are equipped with traditional clamps on nuts, which cannot be disassembled without a key. And the chain is tightened with a screwdriver or a special hex key. It takes a little longer, but the settings are guaranteed to hold tight.

Conventional chain tensioner.

Preparation of a fuel mixture for a chainsaw takes a few minutes. Special containers with graduations allow you to mix gasoline and oil in a given proportion in any quantity. As a rule, one tank filling is enough for 40-50 minutes of work. Having prepared 2.3 liters of fuel in the morning, you will be provided with it for the whole working day. It is not necessary to prepare the mixture for future use, for several days, its properties deteriorate with prolonged storage.

Power supply is the main distinguishing feature

Since the saw is powered by electricity, this type of tool can only be used in places where it is possible to connect to the mains. It is convenient to work with such a tool at home, during construction. When working with a saw, difficulties may arise in the case when it is necessary to carry out work not only in the immediate vicinity of the house, but also to process the entire area.

For smooth movement with the tool around the site for outdoor work, you will need to purchase an extension cord several tens of meters long

In addition, during active movement, for example, when pruning fruit trees, it is necessary to ensure that the cord from the power tool does not get tangled under your feet and does not fall under the operating saw chain.

The saw is more intended for construction work: it is convenient for it to cut wood lengthwise and cut thin boards. The saw cuts are even and smooth.

Due to the main feature of chainsaws. Mobility, they are an indispensable tool for logging. Easy-to-use tools can be used in virtually any position

READ  What's Better Petrol Or Electric Trimmer

The main trump card of the chainsaw is autonomy. The chainsaw will become a handy tool for farming in rural areas, where power surges are not uncommon. Owners who practice outings in order to organize an active holiday: a picnic, expedition, hunting or fishing, can always take a handy tool with them in the trunk of their car.

Working conditions and environmental friendliness

Comparing two tools. A chainsaw or a saw, many consumers pay attention to factors such as ease of use and environmental friendliness.

Saws are quite easy to use: the tool is started by pressing one button. Quite lightweight and compact devices will become indispensable helpers for simple work: to cut something nearby at home, cut off knots, cut thin logs. But when working with wood that has a denser structure, the saw power may not be enough.

You should also take into account the fact that the power tool can work continuously for only 20 minutes, since its engine heats up very quickly, while chainsaws work successfully without interruption for several hours

When choosing a saw for work, you should be prepared for the fact that it will be possible to use it only under favorable weather conditions. Excessive moisture can damage the instrument. The saw is an indispensable tool for work in closed rooms: the compact design in operation emits a minimum of vibration and little noise.

Chainsaws run on a fuel mixture. The engine of the tool is started with a starter cord

For many users who have not encountered chainsaws, the need to prepare a fuel mixture, monitor the quality and quantity of components, is a deterrent factor in choosing this type of product. The manipulation of starting and maintaining the instrument is not as difficult as it seems at first glance.

For work in closed rooms, a chainsaw is not the best option: the fumes and exhaust gases emitted during the operation of the tool do not make it possible to spend a long time in an unventilated room

Chainsaws are less picky about weather conditions: light rain and even snow do not interfere with her work. But, at the same time, in severe frost, the chainsaw may not start at all, which cannot be said about the saw.

What is better than a chainsaw or a saw: a comparative review of units

The arrangement of a suburban area is impossible without the use of all kinds of tools. The question of acquiring a saw, necessary for sawing firewood and boards, as well as other woodwork, at some point necessarily arises before the owner of a country house. Which is better than a chainsaw or a saw? Both tools are noteworthy. The only question is which one to choose. Each of the devices has its own advantages and disadvantages.

READ  Which sander to choose for a tree for the house


A saw is a unit that combines the functionality of a chainsaw and the advantages of a power tool. The rotation of the chain is provided by a gearbox associated with an electric motor. In modern models, the saw headset is automatically lubricated. A relay is also used to protect the motor from overheating during intensive work.

One of the most important saw parameters. Engine power, on which the performance of the unit depends.

The risk of kickback when working with a saw is significantly lower than that of a chainsaw. This ensures greater safety for human health and life.


  • Light weight and compact dimensions.
  • No exhaust fumes.
  • Ease of use.
  • Low cost.
  • Low noise.
  • Easy start.
  • Energy efficiency.
  • Environmental friendliness.
  • Low vibration.

Disadvantages :

  • Power Source Dependence.
  • Afraid of high humidity and precipitation.
  • The need for regular breaks every 15–20 minutes.
  • Low working life and functionality.

The power tool requires a high-quality mains supply. Otherwise, voltage dips can not only become an obstacle to the planned work, but also cause the saw to break.

Every professional builder and home craftsman should approach the choice of a saw responsibly. Indeed, for a certain type of work, both a saw and a chainsaw can be the ideal solution. Such tools are actively used for logging, clearing forest debris, they also cut ice and concrete.

Saws are often used for domestic purposes: to cut or remove a tree, saw wood or cut boards. The article contains materials that will help determine the choice depending on the purpose and conditions of use. Also, it will be useful to study our ranking of the best chainsaws.

When should you choose a saw?

Based on the advantages and disadvantages of the two types of tools, the user should give preference to a saw if:

  • There is enough wire length in the place of work and the wiring allows to withstand the load.
  • The scope of work is not too large.
  • The work is carried out indoors.
  • It is important to maintain a certain level of noise.
  • It is important for the user to maintain environmental safety.

And with the help of a circular sawmill, it is easy to cut any lumber.

Read about how to make your own angular circular sawmill in our article.