Why is the fishing line for a trimmer in a coil of a trimmer for grass. Eternal fishing line for a trimmer for a trimmer for grass…

The fishing line for the trimmer on the trimmer is torn

Replacing the fishing line of the trimmer for the grass with step.by.step instructions will even allow the owner of the lawn mowed inexpensive in such matters to do a fairly difficult job.

However, before starting work to replace the fishing line on the trimmer, it is necessary to ensure the safety of work

In particular, it should be taken protection measures against careless or spontaneous inclusion of the lawn mower:

• Exclude spontaneous start,
• Delete the battery (if used),
• Place the tool on a comfortable site for work.

It is convenient to perform work on replacing the fishing line for the grass when the lawn mower lies on the table, and the master, who is performed by replacing the fishing line of the trimmer for the grass, has the opportunity to approach the instrument from any side.

Why is the fishing line for a trimmer from the coil of a trimmer for grass

How to change a fishing line for a trimmer in a trimmer and which is better to choose

Since the choice of a trimmer for the grass we saw in the previous article, now we will tell how to correctly refuel a trimmer for the grass with a fishing line, and which is better to choose based on the criterion of work.

After you purchased a trimmer for the grass and began to use it intensively, at some point the question will arise about the substitution of the fishing line, since this is the most weary element in the tool, the rich operation of the trimmer for the grass will often lead to replacement of consumables.

How to refuel a fishing line for a trimmer to a trimmer coil for grass. Detailed guide for working with a trimmer

Full instructions for working with a trimmer. Fishing Tips. How to refuel a fishing line for a trimmer to a trimmer coil for grass

But electric and gasoline braids for the grass were originally varieties of lawn mowers, however, with the advent of a trimmer for grass, these structures are ceased to be in demand and are rarely produced, and their names have moved to trimmers. most people are so familiar with this tool.

Types of trimmer heads

A mowing head for grass is a cylindrical case in which a coil (bobbin) is inserted with a fishing line in it (cord). This design can be installed both on gasoline and electric trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

• Automatic. The cord is supplied after the user reduces engine speed. Although the automatic supply of the fishing line is convenient if large volumes of work are performed, such rods have one drawback. a large thread consumption.
• Semi.automatic. Using this type of head does not require complicated manipulations from the user. The principle of their operation is arranged so that the cord is automatically lengthened at a time when the device works at full speed. It is enough to slightly hit the trimmer’s head for the grass on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, moves out of the bobbin, after which it is cut to the desired length with a knife located on a protective casing.
• Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is handed out manually.

Based on the above, semi.automatic bobbins are the most optimal option. It should also be borne in mind that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow high grass and small, with thin stems of shrubs.

The shape of the handle

Manufacturers offer 2 pens options:

The handle in view of the letters “T” is installed on models with auto.wrapping a fishing line. The work is carried out with 2 hands located on both sides of the bar. This situation is convenient for mowing large areas of vegetation. The cut is carried out according to the principle of braids for grass. from one side to the other. This option is not maneuverability, it works poorly on a complex relief. Bicycle steering can be equipped with control buttons. In household types of a trimmer for grass, the launch buttons are installed on the rod.

The classic model of a trimmer for grass with a bilateral handle on which the control buttons are installed

Gasinosinotrimmer with a D-shaped handle is more maneuverable, it is convenient for them to mow grass in areas with a complex relief. In such a tool, the hands are located one above the other. The lack of a handle is difficult to hold, control of such a device is more complicated.

The handle in the form of the English letter “j” is the most uncomfortable, so it is rare.

The shape of the handle

Manufacturers offer 2 pens options:

The handle in view of the letters “T” is installed on models with auto.wrapping a fishing line. The work is carried out with 2 hands located on both sides of the bar. This situation is convenient for mowing large areas of vegetation. The cut is carried out according to the principle of braids for grass. from one side to the other. This option is not maneuverability, it works poorly on a complex relief. Bicycle steering can be equipped with control buttons. In household types of a trimmer for grass, the launch buttons are installed on the rod.

The classic model of a trimmer for grass with a bilateral handle on which the control buttons are installed

Gasinosinotrimmer with a D-shaped handle is more maneuverable, it is convenient for them to mow grass in areas with a complex relief. In such a tool, the hands are located one above the other. The lack of a handle is difficult to hold, control of such a device is more complicated.

The handle in the form of the English letter “j” is the most uncomfortable, so it is rare.

How to remove and disassemble a coil

Before proceeding to the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do it.

The mowing head of a trimmer for grass consists of several parts: a casing, springs (not in all models), bobbins with a cord and cover.

Attention! Before proceeding with any actions to maintain an electric unit, it must be disconnected from the network.

In trimmers, 2 options for fastening the mowing head are most often used.

Option

To remove the head of the trimmer for the grass, it will require its complete disassembly.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

• Insert the screwdriver into the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

Benzotrimmer loves cleanliness. It is necessary to monitor the purity of the air filter and fuel. It is better to defend gasoline bought at a gas station for 2 days and pass through the simplest filter. a piece of bike matter.

We check the electrical equipment as follows:

We unscrew the candle, examine the gap between the electrodes. We set the right gap between the electrodes can be a “grandfather” way. We take a blade from a razor, scraps in half and insert a home.made probe between the electrodes. If the blades enter tightly, then the gap is perfect.

We put on a candle cap of a high.voltage wire and lean the candle against the metal surface of the engine. Twist several times by the starter. If the spark beats well at one point, then the gap is adjusted correctly. If not, the spark is weak or “wanders”, then it is necessary to re.adjust the gap between the electrodes.

Preparation. remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. Fubag tool allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

What can be used instead of fishing line

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer.

Read also: The running screw of the lathe

If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed.

A similar one happens when using steel or copper wire, only with the difference that the torn pieces will be larger and can cause a significant injury.

And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury.

It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once.

In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

Is it possible to make a coil for a trimmer for the grass with your own hands

On sale there are a large number of trimmer heads (not automatic), which have a low price and good quality. But sometimes situations arise, for example, in the country, when the trimmer coil broke, and its repair is impossible, the store is far away, and you need to mow. In this case, you can quickly, literally in a few minutes, make a simple trimmer nozzle to fix the fishing line from ordinary plywood 10-12 mm thick.

• Take a piece of plywood or textolite and draw a circle with a diameter of about 14 cm on it.
• Cut the disk with a jigsaw or hacksaw for metal.
• Drill a hole in the center of the disk, suitable in diameter to the gear shaft. Do not forget before installing a disk on the shaft, put a puck on it.
• You can fasten small corners along the edges of the disk or make 1-2 holes on the opposite sides. They will serve for refueling fishing lines in them.
• To fix the fishing line for a trimmer, you can screw several screws into the plywood.

Such a homemade mowing nozzle is fixed on the shaft with a nut. Twist or unscrew the nut without fixing the shaft will not work. To replace the cord, it will be enough to release the screws, insert a segment of the fishing line of the required length and press it again.

Also, a mowing nozzle for fixing the fishing line on it can be made from a metal sheet. How to do this can be understood from the next video.

If everything is in order with electrical equipment, then we check the carburetor.

Vacuum carburetors are put on trimmers for grass. When disassembling it, cleaning or washing, you need to be extremely careful. in no case do not disassemble the lower part of the carburetor where the primer is located. Air filter (it is visible if you remove the protective casing from the carburetor) should be washed with detergents. Best. for washing dishes. After drying, we put it back. Rinse the carburetor with clean gasoline and blow out all the holes by the pump. We also wash the filter of the gas pipeline, then we dry everything and collect everything. Usually, after all manipulations, the trimmer for the grass begins to work.

Thin cable instead of fishing line, whether it is worth placing it on a motorcycle?

This thought comes to mind almost everyone who had to pump out 10 acres overgrown with high grass. At first glance, the idea seems good. The cable is stronger than the fishing line, not so wear out. However, not all so simple.

Fishing line for a trimmer for a trimmer for grass: why is a lot of consumed

The cause of the large consumption is not only the wrong selection of the string. Problems with a mowing head, improper operation of motorcycles can also lead to increased fishing line consumption.

Problems with a mowing head

First of all, it is worth calling negligence. The springs are often lost. Inexperienced mowers collect the head and do not install the spring. As a result, a fishing line for a trimmer under the influence of centrifugal force during rotation is constantly slightly advanced. The string is cut off with a knife installed on a protective casing. As a result, an unreasonable increase in consumption, sometimes significant. A similar situation arises in an automatic trimmer. If the spring weakened, the thread is extended, cut off with a knife. To check, remove the casing and turn on the trimmer for the grass. If the fishing line for the trimmer is slowly, but constantly moves out of the holes, you need to find a spring or replace the head.

The string can be impudent if the holes in the body and the fishing line for the trimmer are worn on metal bushings for the trimmer. There is only one way out. change the head. Preferably modern, from thick impact.resistant plastic. And with a quick refueling without disassembling the head of the head.

Improper operation of a trimmer for grass

Like any technique, a trimmer for grass has its own restrictions on the operating mode. This is especially true for low.power unprofessional models. The instructions precisely indicate the maximum duration of work and the duration of the break between the inclusion. If you do not follow the operating mode, then not only the engine, but also the head will overheat. To overheat and stick together and a fishing line for a trimmer for a trimmer for grass. With severe heating, even a branded vein is supplied. Even tips do not help lubricate the cord with mineral oil or spray silicone grease. This takes away time, efforts and means (silicone is not very cheap). Therefore, you need to observe the switching mode of the motokos and buy a high-quality fishing line for a trimmer

It is especially important to turn off the tool in a timely heat or at strong load

When working with an automatic head, the mower often resets engine speed. When the rotation of the head is slowed down, the fishing line for the trimmer is extended, trimmed on the knife. And as a result, it is quickly consumed. The vein is also advanced when the head with the ground collides. The coil is unlocked, a fishing line for a trimmer is supplied. over, when a collision with obstacles, the trimmer for grass also goes down and often hits the head on the ground. You need to be careful when working on the slopes.

Problems of the organization of work

Before you start mowing, you need to inspect the front of the work. On the appearance of stones, small hemp and other obstacles. Even on a well-known lawn, something can appear. Stones fall even from the sky, cans and sticks can fly due to the fence. As a result, when meeting with obstacles of a fishing line for a trimmer for a trimmer for grass is broken down. Therefore, you need to walk along the lawn and remove obstacles.

The string is also cut off when meeting with a curb, wood, fence, shop, pipeline. You need to cut the grass very carefully near obstacles.

How to insert a fishing line for a trimmer into a trimmer for grass?

Refueling a mowing coil of cutting thread for a trimmer for grass is not a complicated occupation, however, novice gardeners will have to practice a little to be able to quickly insert the cord into the existing household trimmer for the grass.

There are several ways to refuel a mowing head of a trimmer for grass. The first method is the simplest and is well suited for beginner gardeners.

In this case, the cord is inserted into the coil in the following sequence:

• First, you will need to reinforce from a common spray of about 6 m fishing line for a trimmer for grass, and then cut the resulting segment in half. As a result, 2 threads should be obtained, 3 m long;
• Then, at one of the ends of the first segment, you need to make a peculiar hook, and insert it into one of the through holes located in the upper part of the spool;
• Next, you need to start wrapping the fishing line on the spool in the direction indicated by the arrow. During winding, it is necessary to ensure that the fishing line for the trimmer evenly lays on the surface of the spool, and does not go beyond its upper section. It is not necessary to wind the segment until the end, about 15 cm of thread should remain in the hands;
• The remaining free end of the wound cord will need to be inserted into one of the recesses located in the upper part of the spool;
• Further, the same procedure will need to be done with the second piece of fishing line. It will need to be wound on the lower section of the spool;
• As in the first case, you do not need to wind a fishing line for a trimmer to the lower section. The remaining piece of thread will need to be inserted into the second groove of the spray.

After the operation performed, the coil will need to be installed on a trimmer for the grass and start it. To check the reliability of fastening the thread, you will need to press the gas lever to the end so that the engine reaches maximum speed. If the fishing line for a trimmer does not fly out of the head, then the fishing line for the trimmer is held reliably, and during the mowing of the grass it will not fly out of a braid coil.

Which fishing line for a trimmer for a trimmer for grass is better: which one to choose?

Caring for a lawn or flower garden includes not only watering and weeding, but also cutting grass. Naked land on a flowerbed or summer platform looks unattractive. Even, soft, green “carpet”, of course, much better.

But to bring the lawn into this type, you need special equipment.

Cordi reels: characteristics

The trimmer head, in fact, is a special coil with a fishing line for a trimmer for grass. Inside it, on a spray, wound the cord. as a rule, up to 15 m. The thread of the desired length is pulled out of it during a break or wear. When the string ends, a new thread is inserted into the bobbin.

By the type of supply of cord, the drums are divided into:

• manual. to lengthen the string, the device is turned off, and manually pulled out a fishing line for a trimmer;
• Semi.automatic. activated by your favorite folk technique: you need to knock your mowing head on the ground. When impact, the anchor mechanism is released, and the cord is automatically lengthened;
• Automatic. here you need to reduce speed, and then increase again to the maximum: the coil will give the thread with an increase in speed.

The drum for the fishing line of the grass is also seasoned in different ways. There is no need to disassemble the coil in the fast.shot for refueling, in ordinary ones. it is necessary to remove it and wind up the cord manually. The video shows different ways to replace the string.

3 Комментарии и мнения владельцев on the record “What a fishing line for a trimmer for a trimmer for grass is better: which one to choose?”

What fishing lines did not use all torn like devils, I honestly don’t know how to be further. Either “plow shit” or “falsify”. For any shit. If anyone knows how and where to find a “good” system. This is a big question.

2.four. Star. This is if there is a desire to stock up hay. And for grinding. round.

Figured more neatly. And the rounds are oasking around.

Read how to disassemble a semi.automatic coil from a trimmer for grass

Why is the fishing line for a trimmer from the coil of a trimmer for grass

Since the choice of a trimmer for the grass we saw in the previous article, now we will tell how to correctly refuel a trimmer for the grass with a fishing line, and which is better to choose based on the criterion of work.

After you purchased a trimmer for the grass and began to use it intensively, at some point the question will arise about the substitution of the fishing line, since this is the most weary element in the tool, the rich operation of the trimmer for the grass will often lead to replacement of consumables.

What types of forests I am

The most common type of fishing line, which is suitable for almost all types of coils. a round cross.sectional cord. This is a regular fishing line for a trimmer suitable for mowing of juicy grass, but it will be much more difficult to mowed with dry, and even more so it cannot cope with the shrub.

As a rule, the diameter that can mow young grass does not exceed 1.6 mm. The thicker the thread, the more rough grass it is able to overcome.

There are fishing lines with sharp faces in the form of a sprocket or square, this option is more adapted to mowing dry grass just due to the existing sharp faces, but its lack of wear is more wear and it is inferior in strength to the round cord.

There are fishing lines with improved aerodynamics with characteristic dentes, scales and notches, a similar product makes less noise, but they use it only on benzos, since the output of such a thread from the coil is difficult, it is most often used with disks in which segments are inserted. The disadvantage of such a product is its fragility.

Most often in gasoline trimmers with an engine of more than 1.5 liters.With. Apply cords with a metal cable inside. This thread is ideal for mowing dry grass and small shrubs. The presence of a core, positively affects the wear resistance of this material. The disadvantage of such a cord is its price, which is significantly larger than the above opponents.

The holder of the fishing line on the trimmer broke. The system for feeding fishing line from a trimmer for grass was closed and a fishing line for a trimmer for why? Reply. What to do?

The holder of the fishing line on the trimmer broke. What to do?

How to wind a fishing line for a trimmer to a mowing head of a trimmer for grass or motorcycle

The video shows in detail how to wind a fishing line for a trimmer to a trimmer coil for grass or motorcycle. The gas line is dressed.

How to refuel a fishing line for a trimmer to a trimmer coil for grass

In order to wind a fishing line for a trimmer, it will take about 10-15 minutes. What is the coil of a trimmer for grass? Plastic case with a cassette inside, on which there is a special hook for convenient winding of fishing line. Almost all the coils of the trimmers have a similar attachment principle, this is a central screw-button, when pressed, it becomes possible to stretch the fishing line for the trimmer of the required length. The photo below shows several examples of various coils for trimmers.

Bobbins of the trimmers, the motor of which is located near the ground, have a different fastening to the rotation axis, they have two buttons on the coil located on the sides that need to be squeezed, the rest of the thread is no different from the other cassettes.

The principle of proper winding of the fishing line is similar in all of the above cases, so for example, consider the standard option with two antennae.

To remove the coil with a fishing line, you must unscrew the screw in the center, but keep in mind, the thread there is left, so you will have to twist clockwise, it is specially so that it does not open under the influence of centrifugal force during operation.

Next, using the screwdriver, disassemble the head and remove the coil, on which the fishing line for the trimmer is directly wound. The mowing head of a trimmer for the grass consists of several parts: why is this fishing line for a trimmer flying out. Having measured the required length and folding it in half, you need to tuck a fishing line for a trimmer into a coil, bringing it out, as a result, its ends opposite each other (for this there are special slots for fixation).

After that, it is necessary to assemble the head in the reverse order, passing the ends of the cord in two corresponding holes.

If there are doubts or it is not entirely clear how to charge a fishing line for a trimmer for a trimmer for grass recommend that you see how to correct the fishing line for a trimmer into a lawn mower. In this video, the instructor will open a trimmer head in detail by steps, it will measure the required amount of fishing line, as a rule, this is from two to four meters, and demonstrate the assembly and installation for a trimmer for the grass.

Why is the fishing line for a trimmer from a trimmer coil for grass. Antirun.Ru

Many users of trimmers ask themselves the question: how can I replace the cord, which is used by default in this device? Start conducting unsafe experiments, installing a metal or copper wire, metal cables or cords, as well as a regular fishing line for a trimmer to the head of a mower.

If you install a metal cable instead of a fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that in the steel cable it will gradually disappear, its ends will be dissolved, and small pieces of wire will be scattered in different directions with high speed.

This happens when using steel or copper wire, only with the difference that torn pieces will be larger and can lead to significant injury.

And if you accidentally hooked your own or someone’s leg, working with assembly with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases you are given amputation of the toes. The manufacturer does not use nylon for this purpose, because it is quite bright and durable, and when it is separated, it does not fly away and cannot harm.

You can use a fishing line for a trimmer in a trimmer, and not standard, of course, but this will add to your unnecessary cares, as it wear out quickly, tears, slowly rush and do not fit to cut out solid grass. In addition, when you work, it will take a lot of time to replace the broken tool more than once.

Solving possible problems with fishing line

Most of the problems associated with the fishing line are similar to different trimmers and are solved in a similar way.

Turning the string

• the presence of solid objects in mowing grass: branches, stones, etc.D., contact with which the string breaks off;
• Powder of grass is close to the fence, and if it is mesh, then the fishing line for the trimmer is torn even faster;
• low.quality cord. it is necessary to replace with a new reliable consumable;
• wear of the output holes in the mowing head, as a result of which the fishing line for a trimmer breaks off from friction on the sharp edges of the bushings. it is required to replace parts with a new.

Large fishing line

Typically, a fishing line for a trimmer ends very quickly if you constantly knock a semi.automatic coil on the ground or press it with an effort to the surface. In this case, the head is unlocked, the cord is lengthened, and the knife cuts it. The second version of the fast consumption of fishing line is a trimmer for grass with an automatic coil is incorrectly used. If the mower regularly lowers the engine speed, the string is constantly lengthened and cut and as a result is quickly consumed.

The string does not hold

If the spring weakens the semi.automatic type in the coil of the semi.automatic type, the fishing line for the trimmer does not stay and is unwinded during operation. The cord is extended, cut off with a knife, as a result, the owner of the equipment notes that the thread quickly ends.

Advice! To check the tool, you need to remove the protective casing and start the engine. if the fishing line for the trimmer is advanced, this means that the spring must be changed to a new one.

a fishing line for a trimmer flies out

If the string flies out with kosbe, this is another evidence that the spring in the bobbin is weakened or completely lost with an inaccurate analysis of the head. As a result, the cord does not hold and pops up when rotating.

The string is not advanced

In the coils of automatic and semi-automatic cords, the cord is served without stopping the trimmer for grass. If this does not happen, then:

• The fishing line for a trimmer in the head is wound wrong, so the coil does not spin;
• The winding of the fishing line is made unevenly, so the cord stuck between the turns and does not go out. so that this does not happen, you need to wrap the thread carefully, preventing distortions, a turn to the turns;
• The ends of the cord emerging from the holes are very short, centrifugal force is not enough to extract them, so the fishing line is not served-before turning on the trimmer for the grass, it is important to control the length of the thread and slightly lengthen it, if necessary;
• The cord is stuck.

Read also: Beautiful swing gates photo

The coil does not spin

The reasons why the coil does not spin are similar to the lack of fishing line. This is the wrong or uneven winding of the string, its sticking, as well as the short ends of the cord, emerging from the holes.

Trimmer fishing line sticks together

If when working a fishing line for a trimmer sticks together, the main reason is the installation of a low.quality cord. In the course of work, the coil is heated, and a poor.quality string melts and glued. The second reason is the clash of the cord with solid objects. In this case, its sharp braking occurs, the thread is drawn into the head and picks up.

Advice! To avoid problems, you can apply mineral oil to the surface of the fishing line or, after winding on the head, spray it with silicone. A more competent solution will be the acquisition of a good high.quality head, which will forget about such problems.

So, replacing a fishing line for a trimmer on a trimmer will not be difficult if you know how to disassemble the coil and wind the cord winding. This process is similar for technology of different brands. A detailed description can be found in the instrument operation instructions or watch on the video.

Self.manufacture of bobbin

Quite often, a trimmer for grass is operated in the distance from places where you can purchase spare parts for a spitt with its breakdown. In this case, instead of a broken mechanism, you can install a simple coil made in design made by yourself. To do this, you need a sheet of plywood (textolite, metal, etc.), eyes, screws or screws. The process includes several stages.

• A disk is cut out of the plywood sheet, which corresponds to the failed spool with a diameter.
• A hole is drilled in the center of the disk, which matches the diameter with a shaft of a trimmer for grass.
• Small eyes are attached to the opposite sides of the disk, which will serve to refuel the fishing line.
• Through the eyes, pass the fishing line for the trimmer and fix it with ordinary screws or screws. The coil is ready for work.

Important! It must be remembered that to tighten or unscrew the nut without hard fixation of the shaft.

To replace the fishing line on a home.made bobin, you will have to release fixing screws, insert a new section of the string and tighten the fasteners again. It is not necessary to remove the coil from the shaft of the trimmer for grass, however, it is necessary to exclude the possibility of spontaneous launch of the motor.

So, above was step.by.step with the pictures described methods of repairing the string head. As you can see, the process is not complicated. And most of the breakdowns are directly related to the inaccurate refueling of the string and its unsatisfactory quality. You can clearly see all the stages of the process on the video.