Alteration Of The Screwdriver For Power Supply From The 220 Network
Convenient mains screwdriver: features of use
The cordless cordless screwdriver is a great helper in your home. Almost everyone who he has never let down can agree with this. Those who stopped working halfway have a completely different opinion. This tool will help you always and everywhere, but exactly until the time the battery is discharged. over, the quantity in it is limited. In moments of idleness, the battery can also deteriorate. Batteries typically last no more than three years. When this time expires, it has to be changed or sent to the museum of obsolete things. The situation is possible if you convert the screwdriver into a network one. There are enough ways to do this.
Mains transformers of these brands are of high quality and reliable in operation. In addition, they are quite compact, lightweight, and do not complicate the work with the tool. Their load characteristics are close to those required for a standard screwdriver. In their design there are 2 input and output wires, which allows supplying power to halogen lamps and other types of electricity consumers with a voltage of 12V. However, to use the converted device, you need to adhere to some rules.
Here they are:
- Let the appliance rest for 5 minutes every 20;
- Fix the cable at the elbow with your hand so that it does not interfere with the work;
- Clean the power supply from dust;
- Do not use too many extension cords;
- Do not use the device without grounding;
- It is forbidden to use a converted device for work at height.
Before each start of work with the converted device, make sure it is working properly.
Converting a screwdriver to a network using laptop charging
In the event of a battery failure, a household screwdriver can be switched to mains power by making some changes to its design. This does not require a lot of expenditure of finance, time and effort. The positive nuances of such a transformation are obvious: you do not need to constantly charge the battery, and at the same time, the forced downtime will go away. After all, the shortest duration for charging the device is more than 3 hours.
If you need to connect the screwdriver to the network, you can use the charger from an old laptop. It has similar characteristics to a screwdriver, and it can be easily found in every home or workshop. But, nevertheless, check what output voltage is shown for your charging. In this case, chargers for 12-19V are suitable.
Scheme of your actions:
- We take out unusable batteries from a failed battery pack.
- We take charge from the laptop.
- Cut off the connector and strip the wires from insulation.
- We solder the bare wires or wrap them with electrical tape.
- We make an outlet for the wire in the case.
- Assembling the structure.
This manipulation will allow you to use the screwdriver at any moment, and without stopping for charging.
Why do you need to remodel a mains-powered screwdriver
In order for you to be able to use a screwdriver even in the most inaccessible places without unnecessary wires, at any time, the mobile screwdriver is converted to a network.
Methods for converting a cordless screwdriver into a network vary in complexity. One of them is that powering the charging from a laptop requires practically no knowledge and skills. To mount a computer power supply, you need to know how to handle a soldering iron, and to repurpose a Chinese adapter, you need to know how to handle a measuring device. In addition, there are several other methods for converting a cordless screwdriver directly into a network.
Namely:
- Using a power supply device from a personal computer instead of a battery;
- Giving new life to the car battery;
- Applying, as source, a power supply from halogen lamps;
- By connecting the Chinese 24V power supply board.
For brainy craftsmen, it is not difficult to perform such manipulations. If you are not confident in your abilities, then it is better not to risk it and seek the help of a knowledgeable specialist.
How to convert a battery device to a screwdriver from a 220 volt network
Today the screwdriver belongs to the devices that we very often use in everyday life. It is also irreplaceable in production. This device is suitable for a variety of electrical and construction work. With its help, furniture and other items are assembled, the design of which requires threaded connections.
The reason for this decision is also the fact that when the device is not used for a long time, its battery is discharged independently, which leads to breakdown of the screwdriver due to the destruction of some elements. It is impossible to repair a failed battery, and it is not always possible to purchase a new one. Often, component parts can only be purchased from the official representatives of the manufacturer. Accordingly, the cost of a new battery will be almost equal to the cost of a new screwdriver. Therefore, some craftsmen come to the decision to turn the screwdriver into a network.
Materials and tools required for this:
- Charger from this screwdriver;
- His native battery;
- Soft stranded electrical cable;
- Soldering iron and solder;
- Insulating tape;
- Acid.
First, you need to solder the loose ends of the cable to the terminals of the charger. You need to know that copper wires of a cable with brass contacts can be soldered only after they have been treated with acid. Experts recommend using special solder, but sometimes the simplest methods are used in the form of acid treatment.
How to make a screwdriver from the network
When the batteries stop working due to the fact that they have simply outlived their life, many begin to wonder how they can fix the situation and remake their old cordless screwdriver into the network with their own hands. After all, it is no longer possible to repair a battery with a destroyed element, and the cost of a new one is almost equal to the purchase of a new screwdriver. But zealous and skillful owners came up with a way out. to power the screwdriver from the mains. Some were even able to invent a device that works simultaneously from the mains and from the battery. But it’s best not to.
Converting a screwdriver to a network using laptop charging
In the event of a battery failure, a household screwdriver can be switched to mains power by making some changes to its design. This does not require a lot of expenditure of finance, time and effort. The positive nuances of such a transformation are obvious: you do not need to constantly charge the battery, and at the same time, the forced downtime will go away. After all, the shortest duration for charging the device is more than 3 hours.
If you need to connect the screwdriver to the mains, you can use the charger from an old laptop. It has similar characteristics to a screwdriver, and can be easily found in every home or workshop. But, nevertheless, check what output voltage is shown for your charger. In this case, chargers for 12-19V are suitable.
Using a laptop charger, you can convert a screwdriver to a network
Scheme of your actions:
- We take out unusable batteries from a failed battery pack.
- We take charge from the laptop.
- Cut off the connector and strip the wires from insulation.
- We solder the bare wires or wrap them with electrical tape.
- We make an outlet for the wire in the case.
- Assembling the structure.
This manipulation will allow you to use the screwdriver at any moment, and without stopping for charging.
How to convert a battery device to a screwdriver from a 220 volt network
Today the screwdriver belongs to the devices that we very often use in everyday life. It is also irreplaceable in production. This device is suitable for a variety of electrical and construction work. With its help, furniture and other items are assembled, the design of which requires threaded connections.
In order to convert the battery device to a cordless screwdriver, it is necessary to prepare materials and tools for work in advance
The reason for this decision is also the fact that when the device is not used for a long time, its battery is discharged independently, which leads to breakdown of the screwdriver due to the destruction of some elements. It is impossible to repair a failed battery, and it is not always possible to purchase a new one. Often, component parts can be purchased only from the official representatives of the manufacturer. Accordingly, the cost of a new battery will be almost equal to the cost of a new screwdriver. Therefore, some craftsmen come to the decision to turn the screwdriver into a network.
Materials and tools required for this:
- Charger from this screwdriver;
- His native battery;
- Soft stranded electrical cable;
- Soldering iron and solder;
- Insulating tape;
- Acid.
First, you need to solder the loose ends of the cable to the terminals of the charger. You need to know that copper wires of a cable with brass contacts can be soldered only after they have been treated with acid. Experts recommend using special solder, but sometimes the simplest methods are used in the form of acid treatment.
Why do you need to remodel a mains-powered screwdriver
In order for you to be able to use a screwdriver even in the most inaccessible places without unnecessary wires, at any time, the mobile screwdriver is converted to a network.
It is difficult to remake a cordless screwdriver, so you can ask a professional for help
Methods for converting a cordless screwdriver into a network vary in complexity. One of them is that powering the charging from a laptop practically does not require knowledge and skills. To mount a computer power supply, you need to know how to handle a soldering iron, and to repurpose a Chinese adapter, you need to know how to handle a measuring device. In addition, there are several other methods for converting a cordless screwdriver directly into a network.
Namely:
- Using a power supply device from a personal computer instead of a battery;
- Giving new life to the car battery;
- Applying, as source, a power supply from halogen lamps;
- By connecting the Chinese 24V power supply board.
For brainy craftsmen, it is not difficult to perform such manipulations. If you are not confident in your abilities, then it is better not to risk it and seek the help of a knowledgeable specialist.
Convenient mains screwdriver: features of use
The cordless cordless screwdriver is a great helper in your home. Almost everyone who he has never let down can agree with this. Those who stopped working halfway have a completely different opinion. This tool will help you always and everywhere, but exactly until the time the battery is discharged. over, the quantity in it is limited. In moments of idleness, the battery can also deteriorate. Batteries typically last no more than three years. When this time expires, it has to be changed or sent to the museum of obsolete things. The situation is possible if you convert the screwdriver into a network one. There are enough ways to do this.
For a screwdriver to be comfortable and practical, it must be carefully looked after
Mains transformers of these brands are of high quality and reliable in operation. In addition, they are quite compact, lightweight, and do not complicate the work with the tool. Their load characteristics are close to those required for a standard screwdriver. In their design there are 2 input and output wires, which allows supplying power to halogen lamps and other types of electricity consumers with a voltage of 12V. However, to use the converted device, you need to adhere to some rules.
Here they are:
- Let the appliance rest for 5 minutes every 20;
- Fix the cable at the elbow with your hand so that it does not interfere with the work;
- Clean the power supply from dust;
- Do not use too many extension cords;
- Do not use the device without grounding;
- It is forbidden to use a converted device for work at height.
Before each start of work with the converted device, make sure it is working properly.
How to convert a cordless screwdriver to a mains: powered from a 220 volt network, DIY alteration
You can extend the life of a cordless screwdriver if you convert it to a network one. Those who have used a cordless screwdriver at least once could not help but appreciate its convenience. Without getting tangled in the wires, at any time you can penetrate the device into hard-to-reach niches, bring it to the country house, or take it out into the street and patch up the playground. But all the advantages of such a device are good until the battery is discharged.
- How to convert a battery device to a screwdriver from a 220 volt network
- Why do you need to remodel a mains-powered screwdriver
- Converting a screwdriver to a network using laptop charging
- Convenient mains screwdriver: features of use
- How to make a screwdriver from the network
How to make a screwdriver from the network
When the batteries stop working due to the fact that they have simply outlived their life, many begin to wonder how they can fix the situation and remake their old cordless screwdriver into the network with their own hands. After all, it is no longer possible to repair a battery with a destroyed element, and the cost of a new one is almost equal to the purchase of a new screwdriver. But zealous and skillful owners came up with a way out. to power the screwdriver from the mains. Some were even able to invent a device that works simultaneously from the mains and from the battery. But it’s best not to.