DeWALT DWE7485 Review – Is this the best compact table saw. DeWALT table saw dimensions

DeWALT DWE7485 Review – Is this the best compact table saw?

The DeWALT DWE7485 is the successor to the much-loved DW475. The DW475 was discontinued due to changing safety regs.

The DeWALT DWE7485 table saw is a fantastic choice for carpenters; it’s a compact and portable table saw that can easily be transported between job sites, and I’ll show you why I love it in this DeWALT DWE7485 review.

This isn’t a 10-inch table saw, and that’s the change in safety regs. The DeWALT DWE7485 is an 8-¼” table saw, so for some, its rip capacity may be a bit lacking, coming in at 24.5″; if that’s you, then I suggest you check out the DWE7491RS which is a 10-inch table saw with a 32.5″ rip capacity.

DEWALT DWE7485 Table Saw. Unboxing/Review.

If the smaller blade isn’t an issue, then you won’t be let down by this quality product from DeWALT.

  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets

The DeWALT DWE7485 offers exceptional angled cuts, cross-cutting, and ripping. It shares the same 15 amp power supply that you’ll find on the DWE7491RS and DW745 but weighs less than either of them; in fact, if you are after portable table saws, then this is about half the weight of the DWE7491RS package.

Sure it doesn’t have the same rip capacity, but the DeWALT DWE7485 jobsite table saw’s 8.5-inch blade is still up to the task; its 24.5-inch rip capacity is more than enough to break down those four by eight plywood sheets.

It continues the same usability provided by its predecessors by offering clear markings, easy-to-use controls, and micro-adjustability. You can find standing proud in Its included rack and pinion system, which makes making fence adjustments fast.

This DeWALT table saw has been designed for job site professionals and DIY’ers alike; for a small shop hobbyist, this is the perfect power tool for storing when not in use, and for contractors, moving this between job sites is just a breeze.

When you purchase this DeWALT table saw, you get a portable saw, the table rack and pinion telescoping fence, anti-kickback pawls, a miter gauge, push stick, a 24 tooth carbide blade, riving knife, blade changing wrenches, and a modular guard system.

DeWALT DWE7485 Review Pros Cons

When purchasing a new tool, you want to know where it sails and where it falls.


  • Lightweight, portable table saw
  • Compact size for ease of transportation and storage
  • Easy adjustments rack and pinion system
  • Easy to use
  • Accurate cuts from accurate controls
  • 15 amps and 5,800 RPM motor
  • Site pro modular guarding system
  • Tool-free adjustments to the guard system
  • Safety features are a huge FOCUS, such as including push stick and blade brake
  • Fantastic customer support and warranty
  • Switch lock rack and pinion system
  • Miter gauge and blade angle adjustment
  • Power loss reset prevention
  • Good onboard storage


  • The 8.5″ blade does limit the max rip capacity
  • No included wheeled stand
  • It cannot accept dado blades or a dado stack (which is no different from the DW745)

DeWALT DWE7485 Table Saw Main features

Size and weight

This is a portable, and compact table saw; its dimensions are 22.75 x 13 x 22.75 inches. This thing is small! This is great; you can store this table saw where other table saws can’t be. There is a downside to this, and that’s its table size; it is smaller than others.

This table saw is not only a compact size, but it’s also lightweight; it weighs only 46 pounds; this is a huge bonus as it’s incredibly easy for one person to carry it around. But to save weight, some features and materials were left off of the design.

Table and Rails

You’ll find on almost if not all DeWALT table saws the DeWALT rack and pinion telescoping fence rails, and this is no exception.

The pinion fence rails make it incredibly easy to use, and they provide excellent support beyond the table surface. This keeps those heavier loads balanced between the table and rails; this ensures that those loads will not tip the table saw if they aren’t fastened to the bench.

dewalt, dwe7485, review, this, best

The tabletop is made from lighter compound metals, this is the first tabletop I’ve expedited using these compound metals, but this design element is what helps reduce the overall weight of the table saw.

To the right of the blade, when fully extended, you get 24.5 inches of rip capacity, that’s easy enough to handle four by eight sheets of OSB of plywood. Making this a fantastic choice for those doing cabinetry, though, for those doing large cabinetry, this could be a challenge for the DeWALT DWE7485.

To the left of the blade, you only get 12-inches of max rip capacity. Though this isn’t a limitation, it’s fairly standard among other power tools. This is something left-hand users have had to deal with as they have to control the material with their non-dominate right hand unless the workpiece is of 12-inches or less in width.

Blade and Adjustments

The DeWALT DWE7485 table saw uses an 8.25-inch blade over the larger 10-inch blades that you’ll see on other jobsite table saws. This is a good thing; a change in safety regs has come into force, and it’s a good one, it aligns with what many professionals feel, and that’s that a smaller blade diameter helps to reduce kickbacks.

The smaller blade also requires less energy to spin and reduces waste thanks to its smaller kerf.

The main downside to using a blade of this size is that it just can’t cut as deeply as a larger blade, your end up with a depth of cut of 2 9/16-inches at 90 degrees and 1 3/4 at 45-degrees. But this is still fine for those of you who need to do a 45-degree bevel cut in two-by-four framing lumber.

Adjusting the bevel of the blade is simple thanks to the easy-adjust miter gauge, which works in increments of 1-degrees; towards the table top on the right of the miter gauge is a micro-adjustment knob, which allows you to make those micro-adjustments to your bevel angle.

The DWE7485 has a 5/8-inch arbor which is a common size, so a wide variety of table saw blades will be compatible.

Dust Collection

The DWE7485 has a 2 1/2 inch dust port which will fit many shop vacs such as my Bosch shop vac VAC140A dust extractor; if you need to source a conversion kit to fit shouldn’t be difficult. Though you do need to keep an eye on the hose to make sure that it doesn’t interfere with the riving knife.

A secondary dust port can be found underneath the table saw; this is a larger opening that’s designed to handle shop-sized dust extraction hoses; this dust collection point will suffer less from interference than the dust collection mounted on the blade guard.

Safety Components

Safety features typically begin with the blade guard; this one is clear, so you can easily see the contract between the blade and what’s currently being cut. Though you will need to clean it regularly to keep the view unobstructed.

Anti-kickback pawls are provided, and these keep your workpiece secured against the fence as you make your cuts. These help to eliminate the chance of kickback from loose materials, though no system is fool-proof so remember to keep yourself stepped to the side and not directly behind the workpiece. that way, if kickback does occur, you aren’t in the way of a chunk of wood that’s been flung from the blade.

Another non-kickback element included is the non-through cut riving knives; these prevent the blade from being pinched by the wood, which can lead to stalling or, worse, the workpiece being launched at you.

This has all been designed with DeWALT’s modular guard system. This guard system and its safety features have been an industry standard for a few years now.

This system allows you to remove parts of the safety system, such as the riving knife, without having to remove the entire system; it also allows for tool-free adjustments.

These basic safety features ensure that you are safe from the saw blade, as DeWALT knows that if it’s difficult or time-consuming to adjust the safety features, then people just won’t use them on the DeWALT dwe7485 table saw.

A blade brake helps to bring the blade to a complete stop once the table saw has been turned off. This means that the blade isn’t left spinning after the cuts have been made, reducing the chance of injury.

DeWALT also included on the DeWALT DWE7485 a power-loss reset; this prevents the saw from automatically turning back on if the power is temporarily lost. You can also interrupt the power quickly to prevent injury by hitting the quick stop button.

The power button itself has a guard, which helps to prevent accidental starting, and a push stick is included to ensure that you keep your fingers away from the blade while you push the wood through and make the cut.

DeWALT Support

The DeWALT DWE7485 comes with a 90-day money-back guarantee. This should give you plenty of confidence when you purchase this table saw; if it doesn’t work for you, you can return it within the first 3 months.

On top of that, DeWALT offers one year’s worth of free service; this is an offer you don’t see often provided to power tools; all you need to do is to pay for your power tool to be shipped if shipping is required.

DeWALT also has a website and several social media platforms where you can ask for help and get support. There’s also a number to call to speak to someone. You’ll find the warranty and owners manuals on the DeWALT website should you lose the ones included with your table saw.

And finally, if all that wasn’t enough, this table saw comes with a three-year limited warranty. Which is one of the longer power tool coverage packages included in the industry.


Which table saw is better, DeWALT or Bosch?

This is one of those questions you just have to expect; hell, if it isn’t asked, you have to double-check to make sure the person has really looked over the market.

For me, they are both reliable table saws, and both will do you proud. You need to look over what it is you are looking to do, but both of these brands offer top-notch options; that said, DeWALT table saws tend to include a more powerful motor.

Final Thoughts

I hope that this DeWALT DWE7485 review has been useful; for me, this is a fantastic table saw and one of the best tools at an affordable price.

  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets

Sure the rip capacity isn’t as large as others, but that’s not a deal-breaker; in fact, it’s a positive, something you’ll see offered more and more by the competition as it turns out that reducing the blade size means a lower chance of kickback.

Even with a smaller kickback change, DeWALT has still kept this table saw packed to the gills with anti-kickback assembly.

While this has a portable design, the onboard storage hasn’t been compromised. Sure it doesn’t have the roll cage found on other saws, and yes, it does have more hard plastic, but that just makes it a more portable option.

It’s a small table saw taking up a small footprint, so you’ll have more space in your truck or garage when storing this.

While it’s small, the power output is still incredibly impressive, and it shows in the rip cut, easily making others of the same size or bigger; not once during my use did I feel like I needed more power, and I think that’s partially to do with the smaller kerf of the blade.

dewalt, dwe7485, review, this, best

I absolutely love the pinion system on DeWalts, and the site pro modular guard system really does work to reduce the chance of severe injuries.

Don’t let the blade size put you off; this is an amazing table saw that you really should buy. With the 90-day money-back guarantee, you can always return it if and it is a big IF it doesn’t work for you.

DeWALT Portable Jobsite Table Saw DWE7491

DeWALT has been making table saws since I can remember. Nearly a decade after its initial launch, the DWE7491 is still one of the best portable jobsite table saws on the market. We took a closer look at why so many Pros still use this table saw as their go-to option.

DeWALT Portable Jobsite Table Saw Design

To see why the saw is so popular, we have to start by taking a look at the overall design. DeWALT made the first portable table saw our team used with a rack-and-pinion fence system and we immediately fell in love with its ability to quickly and accurately set up our cuts square to the fence. It also has a flip-up fence to accommodate narrow cuts. Since then, it’s a feature that has stuck around, including on the DWE7491.

Then there’s the table size. With a 32 1/2-inch right-side rip capacity, there’s room to spare for those sheet goods. Combined with 24 inches of left-side rip capacity, it’s a generous table size.

Of course, it’s also a solid performer. There’s 4800 RPM behind the 15-amp motor and its accuracy is excellent with proper calibration. The chink in the armor is that the 90° cut capacity is 3 1/8 inches with its 10-inch blade, so it’s just shy of what you need if you’re trying to rip 4x material.

DeWALT DWE7491 Portable Jobsite Table Saw Price

What wraps it all up with a nice, neat bow is that the DWE7491 is affordable. With a well-built rolling stand, it runs 529.

There are other portable table saws you can get with more power, a larger table, slightly better accuracy, or perhaps a little more stability. You’re going to have to pay more for it or give up features such as the rack-and-pinion fence to get it. When it comes to the complete package, we really like what DeWALT offers for the price.


  • Model: DeWALT DWE7491
  • Power Source: 120V AC
  • Motor: 15-amp
  • Blade Diameter: 10-inch
  • No-Load Speed: 4800 RPM
  • Bevel Capacity: 47°
  • Warranty: 3 years
  • Price: 399 tool only, 529 with stand

Check out DeWALT’s entire table saw lineup here.

DW745 vs DWE7480 — Which Table Saw is Better? (2023)

If you buy something through our posts, we may get a small commission. Read more here.

Choosing between the highly trusted brand DeWALT’s low-budget models, DWE7480 and DW745, can be daunting because they have similar technical specs. Don’t choose the wrong product — our team pitted DeWALT DW745 vs DWE7480 and tested both models so you could pick the best tool for your needs.

DW745 vs DWE7480

The DW745 is one of the best portable table saws available. Large rip capacity and convenient guarding system are only two of the amazing features of this model.

Boasting a great fence rail system and a great no-load speed of 4,800 RPM, this is the perfect portable table saw for smooth and accurate cuts.

The DW745 is one of the best portable table saws available. Large rip capacity and convenient guarding system are only two of the amazing features of this model.

Boasting a great fence rail system and a great no-load speed of 4,800 RPM, this is the perfect portable table saw for smooth and accurate cuts.

Features of DW745 vs DWE7480

Size and Weight

The two table saws are not as different as you might think as they are similar in terms of weight and size. The DWE7480 model is only slightly larger and heavier than the DW745 model.

The dimensions and weight of the DW745 are 22.72 x 29.21 x 16.73 inches rpm and weight 45 pounds, respectively. The DWE7480 model has dimensions of 25.75 x 26.5 x 13.88 inches, and a weight of 48 lbs. They are some of the top-performing portable table saws available today, as well.

Since the DW745 is lighter than its newer version, it is easier for users to carry from one job site to another, depending on the professional requirements.

The larger size of the DWE7480 saw makes it heavier and difficult to store, but this feature adds more stability to your projects. Although, a separate wider stand might still be required.

DW745 vs DWE7480 Power

When comparing the DWE7480 vs DW745 in terms of power, the difference is not significant.

Since both of them use a 15 amp motor power, you would think that they have the same RPM. However, because of the inner construction of the two portable table saws. the DWE7480 can spin the 10-inch carbide blade up to 4,800 RPM. The DW745 provides 3,850 RPM motor power, which is still good for accurate cuts. Higher RPM means better finish cut

So if you need a high-powered table saw, our team recommends getting the DWE7480 model. This is the premium choice for many professionals and hobbyists alike. It pairs a portable design with a powerful 15 amp motor and runs at a max speed of 3,850 rpm. The DWE7480 table saw is better at producing cleaner cuts from harder wooden pieces, and it also cuts better and a little quicker through thick chunks of hardwood.

One thing to note, though: the DWE7480 is a little louder by using 15 amp. so you might need ear protection while using this table saw.

Performance of DW745 vs DWE7480

Both table saws are good performing portable table saws but the DWE7480 model boasts several feature that enhance its performance. The no load speed of up to 4,800 RPM and the rip capacity of 24 inches are superior to the DW745 table saw, which provides 3,850 RPM. It is interesting to note that both saws use the same 15 amp motor.

When it comes to the blade, both models use a 10-inch 24-tooth carbides blade that provide 20 inches rip to cut larger shelved wood. and it with the same adjustability feature. DWE7480 and DW745 have a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. The rack and pinion increases the fence system stability.

An important thing to keep in mind is the fact that this DeWALT portable table saw does not function with a dado blade.

Another pro for the DeWALT DWE7480 model is its ability to make deeper and smoother cuts, it has a 10-inch blade and a 4800 rpm, maximum rip cutting capacity which gives greater precision and accuracy. over, this table saw comes with a coated surface that is proven to reduce friction, thus enhancing straightforward cutting.

Featuring a series of improvements and additions, the DWE7480 model has a slightly better overall performance, being the favorite pick for those aiming for heavy-duty cutting of thicker pieces of hardwood [ 1 ].

Ease of Use

Both models have been specially designed for easy and straightforward usage. DW745 is preferred by many DIYers due to its trademark and versatility, while DWE7480 offers better performance when coming to cutting thicker pieces of wood.

They both feature a high-quality site-pro modular guarding system that allows a safe and efficient setup of applications. They have excellent capacity across the board, with rip capacity 20 inches on the right side of the blade and 12 inches on left. This site-pro modular guarding system allows tool-free adjustments, depending on the project you work on.

Portable and configured for high rip capacity, these table saws can be used by beginners and professionals alike. Their cut depth allows you to use them for many different projects although you might need to purchase an additional blade, fit for the project you work on.

However, our team nominates the DWE7480 model as the winner of the category due to its improved quality that make it easier to use and more efficient. Professional workers seem to agree as well.

Although both use a 15 amp motor, the DWE7480 benefits from an improved version of this motor, hence it provides higher RPM compared to its predecessor. It is far easier to cut thicker pieces of hardwood.

Another feature that qualifies DWE7480 as the winner of this category is its higher rip capacity that allows users to easily extend the fence for accurate cutting.

To summarize, although both table saws have similar functions and features, DWE7480 wins the match due to the higher rip capacity and no-load speed that make it perfect even for beginners.

DW745 vs DWE7480 Accessories

The DWE745 and DWS7480 both have similar accessories. Dust collection port, telescoping fence rails, or adjustable rear feet are some of the common features of these DeWALT saws.

Both DeWALT table saws come with a miter gauge that provides additional flexibility when cutting, an anti-kickback mechanism, and a metal roll cage for extra durability.

The blade guard included in the saws’ design is made of high-quality plastic thus not compromising the visibility. And this is a great security feature for a table saw. Dw745 and Dwe7480 are worthwhile table saws.

A drawback of the DW745 portable table saw would be the lack of a stand. It has a tool-less blade guard. The telescopic rack and pinion fence system is available on both. Apart from that, both models require additional accessories, depending on the projects you are working on. You might need to purchase additional blade separately.

Since both models come with similar accessories, we don’t have a winner between the DeWALT DW745 vs DWE7480. Either saw you pick is a good purchase.

Tool Box Buzz

Browse all brands »

Browse all categories »

DeWALT 10″ Job Site Table Saw with Roller Stand DWE7491RS

DeWALT DWE7491RS Table Saw

Manufacturer: DeWALT Model number: DWE7491RS Price: 579 Power source: 120V Motor size: 15 Amp Weight: 90 lbs

DeWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.

Powerful, Portable Innovative Features

The DeWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

  • Power.The new DeWALT 10″ job site table saws feature a powerful 15 amp motor with an increased speed (over the previous models) of 4,800 RPM. The higher blade speed seems to have improved ripping quality slightly. Overall this saw has plenty of power for all the applications I tested (cutting 3/4″ plywood, 2x framing material, and 1x Maple).
  • Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.
  • Mobile Stand – This is one of the better mobile stands that I’ve ever used. It’s easy to set up, very strong, and I love that it stores in the vertical position in a compact configuration. This stand is worth the extra 100 over the DWE7490X which has a scissor stand.
  • Features – The DWE7491RS is packed with features that are often seen on more expensive shop table saws.
  • On/Off Switch – This saw features a very nice on/off switch with a safety lever/cover. The safety cover has to be lifted up prior to turning on the saw. To shut off the saw it has a bump pad making it easy to shut off.
  • Flip Over Fence – This is a very cool feature as it provides two useful benefits. When ripping narrow pieces, the flip over fence allows the user to make the cut without interfering with the blade guard. Without this feature the guard would have to be removed. When ripping wide boards, the flip over fence can be locked into a lower position to support the work piece.
  • Accessory Storage – DeWALT clearly made an effort to make it easy and convenient to store the accessories including the blade guard. One of my pet peeves on the job site is asking the crew where they put the guard. Typically it gets removed for some cross cutting or dado’s and then never makes it back on the saw. Having a dedicated storage location for the guard makes that much less likely to happen. There’s a place to store the wrench, guard, riving knife, miter gauge, and the anti-kickback knives.

Dust Collection

The DWE7491RS has two dust ports for dust collection. One port is located below the table and one is located above the blade guard.

At the rear of the saw is a 2-1/2″ dust port that connects to the area just below the blade (typical location on a table saw). Attached to a job site vacuum it’s very effective and collects about 80% of the dust depending on the material you’re cutting.

The saw also has a smaller 1-1/4″ dust port on the top of the blade guard to allow any dust above the table top to be collected. At first I was very excited about this idea but soon discovered it seems more of a hassle than a cool new feature.

The first problem I had was trying to outfit some sort of “Y” and hose to tee off my main dust port and attach to the upper one (2-1/2″ to 1-1/4″ “Y’s” are not that common). Then, if the smaller hose on top doesn’t fall to the side, it interferes with the wood you’re trying to cut. After talking to the product manager it sounds like this detail evolved in Europe and found it’s way here. I’ve basically abandoned the upper port and just use the lower one. Cool idea, but it needs some serious redesign and/or an accessory to help make it easier to hook up.

Cut (Ripping) Capacity DWE7491RS

The DeWALT DWE7491RS leads the industry for cut capacity on a job site table saw. This saw offers an impressive 32-1/2″ rip capacity to the right of the blade. The increased rip capacity is sure to put pressure on other manufacturers to increase their capacity.

The unique rack and pinion fence system includes a flip over fence attachment that serves two function. One of those functions is it creates a support for wide materials when the saw is set up to rip material wider than the saw’s table top. The flip fence allows you to cut wider material yet the saw remains very compact when it’s stored.

DWE7491RS Mobile Roller Stand

The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.

This stand is one of the easier stands to set up that I’ve used. To fold the stand up you simply stand the saw up on it’s end. Then the 4 legs fold down by releasing easy to use levers. It takes less than a minute to set the saw up and there are no tools required. The large wheels and comfortable height handle make rolling the saw and stand super easy.

Overall Impression | DeWALT DWE7491RS

The DeWALT DWE7491RS is the best job site table saw I’ve ever used. I say that in large part because the saw has great power, largest rip capacity on the market, and the best mobile stand that I’ve used. The DWE7491RS is also extremely accurate and very well built.

I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating. DeWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

If you’re in the market for a new job site table saw this in my opinion is the one to own!

Todd Fratzel

Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction Improvement.

46 Комментарии и мнения владельцев

Mark – No arguments with the quality of the miter gauge, but the reality is so few people use a miter gauge on a work site saw that it’s a mute point.

Dennis – Not really required as this isn’t a polished cast top like a cabinet saw. It’s got a durable finish on the top.

It could also benefit with an out-feed support extension accessory dado plate. I just got off the phone with DeWALT they do not have these items available. I may just buy the Bosch 4100 due to the lack of these items.

I agree. I’m torn between the 4100 and this DeWALT, but was leaning towards the DeWALT. The Bosch has an available side and rear support, which is making it difficult to decide which I want more. I also like the stand on the 4100 better which is easier to move when setup vs. the DeWALT being difficult after the fact. Maybe I’ll wait it out a bit to see what comes up nest.

Hi Todd Great review. Within a few months, I’m definitely getting this table saw. Do you happen to know what the height is of the table part of the saw when the stand and table are open and ready for use? I am making a small rolling workbench and want to use it as an outfeed table too. So I would like the workbench to be the same height. Much appreciated. Andrew

What’s The BEST Dewalt Table Saw (2022)? The Definitive Guide!

I recently bought one of these and sent it right back. The table was not even remotely flat, sagging obviously into the middle and with several visible depressions in the surface. I don’t know why they combine some great features with such a junk table (and some poor quality hardware on the stand).

I agree. Just bought one and it is going back. Dunno how it works as a saw. I do know the table top arrived bowed – approx. 1/16th” at one side and ~1/32nd” at the other. The machine is thus completely useless except as an expensive boat anchor. The point of buying a 600 table saw was to get a better cut than my 99 version – this is nowhere near as good as my cheap saw. Now I am supposed to box it up (an enormously difficult task in itself because how tightly it is packed), somehow pick up a 110lb 4′ x 3′ x 3′ box (with weak cardboard that tears if you use the included handles) on my own to put it into my vehicle, drive to the nearest store (an hour round trip), somehow get a 110lb 4′ x 3′ x 3′ box out of the vehicle, lug it into the store, wait in line to return it, then presumably wait while another one is shipped to me (the local store has none of these in stock). ‘Assembled in America’ apparently means ‘Make parts in the same poor quality Chinese sweatshop as the machines that are Made in China, ship to the USA, do no QC on said parts, assemble in the US, ship out with no QC on finished product’. I have three other DeWALT tools. There won’t be a fourth after buying this extremely expensive boat anchor. Going back to my far, far superior 99 table saw.

Got mine yesterday. Set it up. Cuts very fast. My concern is when I put a straight edge against the fence vertically, it only touches the fence at the top and bottom. There’s about a 0.025″ gap in the middle. Is this a concern for accuracy? I guess I could add a thin piece of hardwood to the face of the fence to make it more flat and perpendicular. I also don’t find an adjustment for the perpendicularity of the fence face to the table. Any thoughts?

dewalt, dwe7485, review, this, best

Ed, I wouldn’t worry about the middle of the fence as the material should be hitting the bottom edge. Let me look into the adjustment on the fence…great question…ours was spot on out of the box.