DIY angle grinder cover

DIY angle grinder cover for vacuum cleaner

angle, grinder, cover

Hercules angle grinder vacuum dust cover

Cover for angle grinder for vacuum cleaner.

Crazy offers you two ways to make a casing for an angle grinder for a vacuum cleaner.

Method 1 Method 2

A lot of dust is generated when using a construction angle grinder. Whether it is a wooden surface or any other surface, the question arises, how do you get rid of dust and debris? There is a way out. a casing for an angle grinder with a vacuum cleaner connection.

Buying a new casing for a vacuum cleaner angle grinder is expensive. Therefore, it is advisable and not at all difficult to make such a casing for an angle grinder for a vacuum cleaner with your own hands. These homemade angle grinder attachments always serve well and save you time and nerves.

What you need to make

To make a casing, you need a metal plate about 2 mm thick. You also need a piece of pipe that fits the casing and the vacuum cleaner.

How to measure the dimensions of parts

The guard should be 3 cm from the cutting surface of the angle grinder.

The tube must fit into the tube of the vacuum cleaner, or be wider in diameter to fit the tube of the vacuum cleaner inside.

And so in order to cut out all these parts and the casing for an angle grinder for a vacuum cleaner, you can use the same angle grinder yourself. Next, the parts need to be welded by welding. During the welding process, inconsistencies and irregularities may occur. The result is seams that are smoothed out again with an angle grinder.

There is the last moment. the connection of the casing and the vacuum cleaner itself.

The least energy consuming method is using duct tape.

It is very important to choose a quality tape as cheap thin tape will not withstand all loads and manipulations.

It is desirable that the pipe from the casing fit into the pipe of the vacuum cleaner or vice versa. Then the connection will be the most durable.

We’ve got a great dust cover for our angle grinder.

The matter is not very complicated. with the right approach, you can do everything yourself. Success.

We take a regular pan (preferably not aluminum, as it can melt)

Cut out a photo for the casing of the angle grinder from it. Having previously measured the angle grinder itself.

From the same pan, we cut the cloves to the size of the twisting sleeve of the angle grinder (or from another more pliable material, the temperature will not affect them, aluminum is also possible).

We attach the teeth to the root of the twisting sleeve. We tighten with a special device (sold in the lublm construction market)

We make a hole in the corner of the casing and bolt the holes for the vacuum cleaner (with a diameter slightly smaller than the tube of the vacuum cleaner itself)

Next, we cut out the cover from a metal plate (not aluminum), attach it to the casing (having previously wrapped the upper part of the casing)

And so, the beginning got a casing for an angle grinder with the ability to connect a vacuum cleaner.

Cover for angle grinder for vacuum cleaner

The angle grinder is not only a popular type of tool, but also easy to use. To use the tool, you do not need to have special skills, but it is important to follow safety precautions. When working with an angle grinder in rooms, there is an active generation of dust when processing concrete, wood, ceramics. Specially in order to avoid the generation of dust, covers for an angle grinder for a vacuum cleaner were invented and manufactured. With such a device, working with an angle grinder has become even easier and more enjoyable.

See also  angle grinder diold 150 with speed control

Angle Grinder Cover Options

Covers for an angle grinder for a vacuum cleaner can be made by yourself, so there is no need to spend money on a factory attachment. In addition, there are more than enough options for making a homemade casing. Let’s consider a couple of options for making angle grinder attachments that will help to carry out work in a room “without noise and dust”. In terms of noise, the use of such nozzles also reduces the noise level, although only slightly.

The first version of the casing involves the use of a saucepan. It is possible to make a cover from a pan without much difficulty and even without using a welding machine. The only condition is the presence of an old aluminum pan. To make such a nozzle, you will need to cut a casing from the pan, adjusting it to the size of the power tool.

It’s important to know! The use of a material such as steel will not be relevant, since welding will be required to make the casing.

Having decided on the depth of penetration of the circle, you should remove the excess part of the pan, which can also be done using an angle grinder. In the resulting part of the pan, you need to cut a hole for the landing axle. The diameter of the axis can be tried on directly on the angle grinder itself. The diameter must be as accurate as possible, otherwise the nozzle will slide off during operation.

In the back of the resulting nozzle, a hole should be made for the vacuum cleaner hose. This hole, which is called a dust extraction, must enter the pipe of the vacuum cleaner in order to suck out the dust. The presence of a dust collector or dust collector allows you to perform the main task, to eliminate the occurrence of dust in the room when using the tool. At the final stage, the edges of the casing should be bent inward, with their help, the side wall will be fixed.

Angle Grinder Cover 5″

The side wall for the angle grinder guard can be made of any material. It is best to use a thin galvanized sheet or straighten the rest of the pot. A piece of metal of a suitable size should be cut and screwed to the main product with self-tapping screws. The photo below shows a view of the resulting casing for a do-it-yourself angle grinder.

You can also make a cover from a plastic canister. This option is also economical and even easier to implement. First you need to find an empty plastic canister, which is necessarily in the garage. We proceed to take measurements, since an important condition is to ensure the required immersion depth of the circle.

It’s important to know! The size of the canister required depends on the angle grinder. For grinders under a 115 mm disc, a liter canister of oil or brake fluid is suitable.

Cutting out the casing is done with a construction knife. The neck of the canister should be left, as it will play the role of a dust collector or to fix the hose from the vacuum cleaner on it. We recommend cutting a hole at the level of the angle grinder axis, the size of the working disc nut. This will increase the convenience of replacing an erased disc.

After the product is ready, you can put it on the tool and try it in action. You should get something like the one shown in the photos above and below. Such a casing is not only easy to manufacture, but also does not require any additional costs.

See also  PIT 125 angle grinder with variable speed

Depending on the material and manufacturer, factory attachments will cost from 600 rubles, but is it worth buying such a device at all when you can make it yourself without much difficulty. The above options are especially relevant in cases where it is required to perform a one-time work in the room, but at the same time you want to reduce the occurrence of dust.

Only a construction vacuum cleaner must be connected to a home-made or purchased casing for an angle grinder, it is designed to work in this mode. We do not recommend using a home (household) version of the vacuum cleaner, as it will not be able to cope with a large amount of dust. It will fill up (clog up) with dust very quickly, which can lead to breakage.

General guidelines for using the angle grinder

Safety precautions must be followed when working with a tool such as an angle grinder. A cover for a vacuum cleaner for an angle grinder is not only an option how not to litter the house when doing work. The advantage of such a cover is the protection of the person doing the work from various factors. Working without a cover is like playing Russian roulette: lucky or unlucky.

During operation of an angle grinder, such options for negative consequences are possible as breaking a circle, which often happens with abrasive discs, as well as the appearance of small fragments and stones that can get into the eyes. The harm of dust generated during the processing of concrete and ceramic products lies in the fact that it is able to reach the lower respiratory tract. It is strictly forbidden to carry out work on cutting concrete or ceramics without a protective cover and respirator. It is especially important to use a respirator and safety goggles if work is done without a protective cover.

An angle grinder is an indispensable tool for various jobs. With the advent of such a tool, human manual labor has become much easier, but at the same time the likelihood of injury has increased. In order for the tool to continue to be the best helpers in the household, design a homemade cover for it, protecting yourself from possible serious injury.

Communities Fiberglass Blog Angle Grinder Cover with DIY Vacuum Cleaner.

Hi guys! I often gave something to you). But that’s how it happens with newbies. There are many topics. I want to ask a lot, share a lot. In general, the topic is this. When I was faced with grinding fiberglass, I realized that this is trash, to put it mildly. I have an orbital with a dust extractor, but I don’t have an angle grinder. And since I roughly polish it at first, the picture looks something like this:

And this, of course, with a mask with glasses and a bathrobe. But the dust is everywhere in a thick layer! Everywhere. No, I assumed there would be something like that. But what would TAAAK))) In general, having studied the topic, I realized that I needed to buy a casing for a vacuum cleaner. Like this

But I didn’t like the price. So I decided to try and make the casing myself. Next, there will be photos with minimal Комментарии и мнения владельцев. I took a plug from a 160mm pipe as a basis. Price 115r.

I cut it like a photo and bent them on a gas burner.

I put it on an angle grinder and figured out how much I need to cut off the excess

it is necessary that the disk would come out a little. just a couple of mm.

After I cut a hole for the dust extractor.

To do this, a water pipe came up to me for 50 rubles.

See also  Paint remover for angle grinder

For better protection from dust, I glued a rubber tape to double-sided tape.

And I cut a little in 1 cm. In a circle.

Thanks for attention. Perhaps this will help someone save a couple of thousand.)) A more detailed review on my channel

Комментарии и мнения владельцев 28

I did some kind of thing by stupidly welding two standard covers from an angle grinder and welding a pipe for a vacuum cleaner, a really useful thing, I leveled the hump on the wall with a diamond cup and not a drop of dust.

One self-builder made a car body from fiberglass. he said that he had adapted to plane the surface with a plane. I tried it. it didn’t work very well. But planers are different and you need to be able to regulate. There are also semicircular ones. like a rasp. Chisel irregularities can also be cut. In short, the angle grinder is the last thing.

As a rule, a plane (electric) is used to remove the gelcoat from the bottom of boats when fiberglass is damaged by osmosis

well, I don’t know it’s refined or not, but I saw his car. it’s cool. a sports car like Pangolina (it was in the early 90s)

Now why advise it. The 90s are long gone

I was the only one who thought that when skewed, this orange thing doesn’t fucking hurt the hand of a competitor?))) Well, unreliable crap. Or zakolhozit regular metal. And after all, you can’t see a fucking grinded surface. How to grind in the blind?

Well, yes, so that if it really flies off or twists, so that the hand is probably cut off. Metal then why the hell does she fly away?

I also did this, the current from two casings, I got the norms, I used it to remove old plaster, I made the current exit direction along the angle grinder

With this thing, I extended my life by one day.

I usually have a vacuum cleaner in one hand, in the other Bulgarian it is very convenient that depending on the plane the direction of the torch changes, but there is much less dust. And you have to change your hands. The left one worked badly at first, then I got used to it. I have a Makita angle grinder, it weighs a lot, not very convenient, but powerful, you can quickly bite into it. I put on minimum speed and in front of you an angle grinder without adjustments? tin

I also put a filter from the injector vase on the tail of the vacuum cleaner. what the vacuum cleaner did not catch, I hope that the filter caught it. it was noticed that the filter is all dirty, apparently it works.

probably it became not convenient to work with such a design. if you work indoors, then you need to make a very powerful hood, which significantly reduces the air pressure in the volume of the room! The second option is a street with windy weather !

extractor hood so-so. But the street right now is definitely not an option)

No, I’m not at all against all sorts of priblud. But based on my experience, it is not an option to process plastic indoors (or a wildly powerful hood), all the same, everything is in dust. Even in winter I work on the street wearing warm clothes. Wearing gloves (or even a couple of pieces on top) is more comfortable for me than with pribludes on an angle grinder. This is my personal opinion, I do not impose on anyone. Or a separate room only for these purposes, conditionally warm and as large as possible. And you still need a powerful hood (((