DIY tracked mini tractor from a tiller

Bridge shortening drawing

The shortening of the bridge can be seen in the drawing:

As for the front axle, it can be made following the drawing:

The size of the wheels must be selected in such a way that they correspond to the dimensions of the entire structure, therefore it is difficult to give exact dimensions, because the dimensions of the frame are different for everyone.

The tire must be cut from the sides, and then put on the wheels located on the axles.

Additional Tips

Making a homemade tracked mini tractor is a rather complicated process, so it will not be superfluous to follow certain tips that will help in assembly.

Among the main recommendations are:

  • At the initial stage, even before assembling the unit, it is best to reflect the future mini tractor on paper by making a detailed drawing indicating the exact parameters and dimensions.
  • You need to make sure that you have the necessary tools. an angle grinder, welding machine, drill, etc.
  • When assembling a caterpillar mini tractor, you need to carefully tighten all fasteners. Although the design looks rather cumbersome, it requires a certain frugality, because assembling with your own hands is a rather specific process.

Crawler homemade products: do-it-yourself mini-tractor. tractor drawings

Transportation of various construction materials, sacks of potatoes and grain. all these are common and everyday worries for a villager, with which a caterpillar mini-tractor can help him.

This will help not only save your money, but also become an exciting experience for a real owner and a man.

How to do it yourself

A home-made tracked mini-tractor is a structure consisting of various working units. Each such unit is manufactured separately, therefore, the consideration of the mini tractor will consist in the description of its component parts.

This part is decisive, because the stability of the entire structure will depend on its strength, because it is on the frame that the rest of the nodes are attached. To make the frame, we need a welding machine, a pair of traverses and two spars. In the construction of a homemade unit, there is a spar consisting of several steps. the outer parts consist of a channel, and the inner ones are made of a square pipe.

Farm owners are increasingly resorting to purchasing special technical devices. grain grinders, with which they can process raw materials, thus preparing feed for feeding on their own. By clicking on the link, see how to make a do-it-yourself grain crusher from a washing machine.

To facilitate labor and increase productivity, various types of manual cultivators have been created for cultivating the soil in the country. With the handheld garden cultivator, your work is quick and easy.

Recently, small-sized agricultural machinery has been very popular, allowing you to carry out the same work as their “older brothers”, but at the same time they cost an order of magnitude less. It’s all about the advantages of a mini combine harvester.

In this case, the front traverse will be smaller in size than the rear one, i.e. if channel 2 is used on the front part, then channel 6 is needed for the rear part.

Related mechanisms

It is clear that the functionality of the future mini tractor on tracks will depend on the gearbox, as well as the clutch assembly. For these purposes, a gearbox taken from the GAZ-53 is perfect, and the clutch can be “borrowed” from the GAZ-52.

In general, the order of design work will contain the following sequence of steps:

  • Manufacturing of a frame structure from channels by welding. Fastening road rollers to it, as well as wheels from the trolley, which will set the unit in motion.
  • Installing the engine and gearbox.
  • Mounting the differential and side brakes, with their subsequent connection to the gearbox.
  • Connecting the driver’s seat as well as steering.
  • Tensioning the tracks on the wheels.
  • At the end of the assembly, you need to check the reliability of all fasteners, as well as the performance of the unit itself.

A home-made caterpillar mini-tractor with your own hands, the drawings of which can be easily found on the Internet, is a rather nondescript and simple design.

However, beauty in this matter does not matter at all, because the main task of such units is to perform a whole range of works that cannot be handled manually.

And with this, a homemade mini tractor copes with a bang, unless, of course, all the work is done correctly, in compliance with the dimensions and certain recommendations.

The best solution would be to use a diesel unit, the power of which should be at least 12 hp.

It is desirable that such an engine be water-cooled. It is important to understand that this is the acceptable minimum at which the mini-tractor will work, but not show good performance.

Therefore, it is best to use a more powerful motor.

The drawing clearly shows the specifics of the motor gearbox device, which is necessary for the independent manufacture of a mini tractor.

For these purposes, a bridge taken from old domestic cars that have served their life may be perfect. For example, you can use the rear axle taken from the Volga GAZ-21. The only thing is that it will have to be slightly corrected by grinding it down to a width of 80 cm.

In addition, you need to remove the rivets located on the fixing stockings.

Mini tractor from Tiller Bison

Tillers of this brand have a reliable and powerful enough motor, the presence of which allows the unit to be converted into an all-wheel drive minitractor. Before starting work, be sure to study the detailed drawings, and also buy steel sheets, pipes and corners. The procedure for manufacturing a mini tractor is as follows:

  • When arranging the frame, you will need to expand the existing tiller frame. This is necessary in order to install additional wheels. Cut the corners and pipes into suitable pieces, then weld them to each other;
  • The front beam on the mini tractor is mounted by means of a ready-made hub equipped with brakes. Wheels in the front of the unit must correspond to the size of the rear wheels, or be slightly larger than the latter. this will prevent the mini-tractor from “burrowing” when driving over rough terrain;
  • Then install the tiller motor. It is best to mount it at the front to achieve the best balance of the overall structure;
  • Weld the towbar to the rear of the finished mini-tractor. it will be required for mounting the trailer.

A home-made mini-tractor, made on the basis of the Zubr tiller, will be able to cope with a number of the most difficult economic tasks: plowing the soil, mowing grass, collecting and transporting crops.

Mini tractor from Tiller Neva

Converting a tiller into a small tractor may be slightly different. It all depends on the design features of the tiller and his abilities. Consider the principle of making a mini-tractor from Neva tillers.

As in the first case, before making a minitractor, you need to study the diagrams. They detail the dimensions of the elements and the order of their installation during assembly. The procedure for rework will be as follows:

  • The frame is made in the same way as in the first case. To create it, use pipes of different sections. Fastening of the frame elements is carried out by means of bolts and welding;
  • Next, proceed to the manufacture and installation of the chassis. To mount the rear wheels, use an additional axle, which can be made from steel pipe. Press the bearings and bushings into both ends of the latter, which will be equipped with the rear wheels;
  • Further, the tractor from the Tiller Neva must be equipped with a motor. over, the engine can be installed both in the front and in the rear of the frame. In the second case, the front and rear wheelbase of the mini tractor will need to be expanded;
READ  Do-it-yourself self-propelled cart from a tiller

In the end, the self-made unit will remain equipped with a driver’s seat, lighting devices and side lights. Due to its small size, the finished tractor will have high maneuverability, which will allow it to be used effectively in hard-to-reach places.

Mini tractor from a tiller: 4 do-it-yourself manufacturing option

Many tiller owners often think about upgrading their agricultural equipment. In fact, it will not be difficult to improve the available unit, and make a full-fledged mini-tractor out of it. However, you will be required to study the recommendations and follow the procedure. this will give you the opportunity to get an effective homemade mini tractor that will be able to solve absolutely all the tasks assigned to it.

How to make a mini tractor from MTZ tiller?

To remake Tillers of this brand, you should also take into account their design and capabilities. MTZ units have a sufficiently high power, which makes it possible to make a full-fledged tracked mini-tractor out of them. It will be distinguished by high cross-country ability and excellent grip, due to which the quality of plowing the soil of such a machine will be several times higher than that of wheeled mini-tractors.

Before starting work, be sure to study the drawings, in which you will find all the information required for the alteration. The procedure for assembling a mini tractor is as follows:

  • First put the tiller into mower operation;
  • Then completely dismantle the front platform of the unit;
  • Install a caterpillar drive in the front of the mini-tractor being manufactured;
  • Install an adjusting rod in the niche for mounting the steering rod. This element will increase the rigidity of the entire structure;
  • Weld the driver’s seat to the top of the frame;
  • Next to the motor, arrange a platform for mounting the battery and hydraulic valve.

Such a manufacturing method is suitable for converting MTZ 05, MTZ 09 and MTZ 12 tillers into small tractors. Each of them has a sufficient power reserve to work together with a trailer and attachments at the same time.

Do-it-yourself mini tractor from a tiller. manufacturing procedure

Before you start making a mini tractor based on a tiller, you will need to prepare the materials necessary for work. The conversion kit includes:

  • welding machine;
  • screwdrivers and wrenches;
  • electric drill and a set of various drills;
  • angle grinder and a set of discs for working with metal;
  • set of nuts and bolts.

Suitable drawings will help to correctly assemble a tractor from a tiller. In them you will find information about the order in which to connect the parts and what method of fastening is suitable for their reliable installation. Converting a tiller into a mini tractor is performed in the following order:

  • A mini tractor based on a tiller must be equipped with a strong, reliable frame. It must withstand an additional pair of wheels, plus the load transported in the tractor will press on the supporting structure. For making a solid frame, pipes or metal corners are best. Be sure to keep in mind that the heavier the frame, the better the adhesion of the mini tractor to the road, and the better the plowing of the soil will be. The thickness of the frame walls is also not very important. the main thing is that they do not bend under the pressure of the transported cargo. You can cut the blanks for making the frame using an angle grinder. Then all the parts are connected to each other first by means of bolts, after which they are finally welded to each other. To make the frame stronger and more reliable, equip it with a crossbeam;
  • Immediately after the frame has been manufactured, it can be equipped with a hitch, by means of which the small tractor will be equipped with additional accessories. The hitch can be installed both in the front and in the rear of the supporting structure. If in the future the minitractor being manufactured is planned to be used in tandem with a trailer, then a hitch should be welded to the rear of its frame;
  • At the next stage, the homemade product is equipped with front wheels. For this, the mini-tractor being manufactured is best equipped with two ready-made hubs with brakes provided on them. Next, you need to fix the wheels themselves. To do this, take a piece of steel pipe, the diameter of which fits the front axle. Next, attach the wheel hubs to the pipe. Drill a hole in the central part of the pipe, which is necessary for mounting the product to the front of the frame. Then install the tie rods and adjust them in relation to the frame by means of a worm gear. After installing the gearbox, install the steering column. The axle at the rear of the manufactured tractor is mounted through pressed-in bearing bushings. Wheels used should be no more than 15 inches in diameter. Smaller parts will lead to the “burying” of the unit with the front part, and larger wheels will significantly impair the maneuverability of the mini tractor;
  • The next step is to equip the minitractor with a tiller engine. It is best to mount the motor at the front of the machine, as this will improve the balance of the agricultural machine when operating with a loaded trailer. Establish a secure mounting system to mount the motor. When installing the motor, do not forget that the power take-off shaft must be secured coaxially with the pulley located on the rear axle of the mini-tractor. The force on the wheels must be carried out by means of a belt drive. details about converting a tiller into a mini tractor will be described in the video.

A self-made tractor will remain equipped with a reliable braking system and a high-quality hydraulic valve, which is necessary for the proper operation of the unit with attachments.

Mini tractor from Tiller Agro

Before you start reworking the tillers of this brand, you should stock up on material and the necessary tools. To work you will need:

  • sheets and profiles of stainless steel;
  • seat and steering wheel. can be removed from an old car;
  • a pair of wheels. their diameter should not exceed 15 ”;
  • a set of fasteners;
  • angle grinder and electric drill;
  • hammer and welding machine.

After preparing everything you need, we advise you to study the diagrams that will tell you the correct procedure for installing the tractor elements. We also advise you to see photos that will certainly help you in the manufacture of an agricultural unit.
Unlike the tillers of the manufacturers listed above, the Agro brand equipment has one significant drawback, which must be taken into account when converting a tiller into a mini tractor. It lies in the fact that the tiller axis has very weak fracture strength. This kind of fracture will certainly affect if you exceed the maximum permissible load on the mini-tractor frame. To avoid further malfunction, the mini tractor will need to be equipped with wheel gears.

The procedure for assembling the unit is as follows:

  • The first step is to weld a sturdy tractor frame. To do this, use steel profiles and pipes. Be sure to keep in mind that the heavier the frame made, the better the adhesion of the minitractor to the ground will be. At the rear of the supporting structure, weld the tow hitch, which is required to hitch the trailer to the unit;
  • Then proceed to the manufacture and arrangement of the minitractor undercarriage. To do this, you can purchase a pair of ready-made front wheels, as well as hubs equipped with brakes. After purchasing the parts, attach the hubs to the steel pipe, and drill the holes in the front of the frame that will be required to mount the hubs to the mini tractor. Next, install the steering rods using a worm gear. After the rods, secure the steering column and rear axle. When installing the latter in the bushings used for mounting, press in the bearings. Install a pulley on the rear axle and secure the wheels;
  • Then mount the engine to the front of the frame. We advise you to do this by means of an additional frame placed on special shock absorbers. this will avoid strong vibrations at high loads on the motor;
  • Next, install the driver’s seat on the mini-tractor, connecting it to the frame through the springs. thanks to them, it will be much more convenient to work with the mini-tractor.
READ  DIY wheels from Lada to Tiller

If you wish, your hand-made compact tractor can be equipped with a canopy that protects you from rain and sun. To make it, 4 steel pipes must be welded to the frame next to the seat and steering column, to which a steel sheet must be fixed by spot welding. As a result, you will get a reliable unit for a summer residence, which will quickly cope with all the tasks assigned to it.

Homemade tracked mini tractor: features and photos

A homemade crawler tractor is a good tool for rural residents and small farm owners. Such a technique is able to facilitate the implementation of a whole range of works, increasing labor productivity and the speed of processing land. This is plowing the soil, transporting the harvested crop, fertilizing, loosening and much more.

Other mechanisms

How the crawler homemade mini tractor plows and its other performance characteristics will also be affected by details such as the gearbox and clutch assembly. For the arrangement of these blocks, analogues with GAZ-52 and 53 are suitable.

In general, the procedure for assembling the specified equipment can be determined by the following steps:

  • Creation of a frame part from channels by welding, fixing track rollers on it, wheels from a trolley that drive the machine.
  • Mounting the motor with gearbox.
  • Installing differentials, brakes, connecting them to the checkpoint.
  • Workstation and steering equipment.
  • Track tension on wheel blanks.
  • Checking the reliability of all fasteners and the performance of the entire structure.

The creation of homemade tracked mini tractors for arable land is a rather painstaking and difficult process. The assembly will be helped by useful tips, which are given below:

  • Before starting the process, you should display the future model on paper by completing a detailed drawing indicating the exact dimensions and parameters.
  • Make sure you have the necessary materials and tools, including an “angle grinder” and a welding machine.
  • All fasteners must be tightened consistently and carefully. Despite all the cumbersomeness of the structure, it requires careful handling, since manual assembly is a rather specific process.
  • The process itself is quite interesting, capable of captivating any man. Nevertheless, it should be clearly understood that self-made modifications will be inferior to factory counterparts in a number of characteristics. This is not surprising, because in most cases old parts and surface-treated materials are used, which does not give the machine enhanced performance. In addition, to create such a unit, it is necessary to have certain experience, technical knowledge and relevant skills.

Performed work

Homemade mini tractors on crawler tracks are suitable for performing the following manipulations:

  • loosening the earth, including digging the beds;
  • applying various fertilizers by spraying;
  • harvesting, lawn grass care;
  • garbage removal, cleaning of the territory from foliage and snow;
  • transportation of goods for various purposes.

As practice shows, with the help of the technique under consideration, most of the work inherent in rural residents can be carried out. In addition, such a unit is quite suitable for a number of construction operations.

Running elements

For a homemade tracked mini-tractor from a tiller, a bridge from used domestic cars is suitable. Often, for these purposes, a node from the GAZ-21 is used. over, it will have to be finalized by turning to a width of 0.8 meters. You will also have to remove the rivets from the fixing stockings.

If you don’t have ready-made caterpillars at hand, you can make them yourself. As a starting material, you will need four wheels and a pair of tires from a large-sized car. The size of the elements is selected so that they are in harmony with the dimensions of the entire machine being created. In this regard, it is difficult to name the exact diameter of the wheels precisely, since the dimensions of the frames for homemade equipment differ significantly. The tire is trimmed at the edges and put on the wheels placed along the axles.

Advantages and disadvantages

The advantages of a homemade tracked mini tractor include several main points:

Home made tractor.

  • increased traction performance compared to wheel counterparts;
  • decent ride, even on the most difficult terrain;
  • reduced soil deformation when driving;
  • increased cross-country parameters;
  • saving financial resources in the manufacture of the unit with your own hands from scrap materials.

There are also disadvantages, and among them:

  • lower speed than wheel modifications;
  • increased fuel consumption;
  • exclusion of the possibility of movement on an asphalt surface;
  • high noise level during work.

DIY caterpillar mini tractor

A homemade version is a construction of several basic units. Each part is made separately according to drawings and diagrams. Let’s start the description of the assembly with the frame part. This element is a defining detail, since the stability of the entire model depends on its strength. Other units are attached to the frame. The base is made from a pair of spars, a traverse, connecting them by welding.

The outer part of the future frame consists of a channel, the inner fittings are made of a square tube. At the same time, the frontal traverse will be smaller than the rear counterpart. For example, from channels 2 and 6, respectively.

Making a tractor on tracks

A crawler tractor is an essential technique in a farmer’s work. With its help, you can plow tens of hectares of fertile soil, as well as transport various goods. Now you will learn how to make a tractor on tracks with your own hands.

First you need to make tracks, read the detailed manufacturing process above. Next, using a welding machine, start welding the structure, which will be the basis for the tractor. It can be made from metal plates, beams, rails and other metal elements.

We smoothly approach the cockpit. It can also be made by welding metal structures and fixed with construction bolts for greater strength.

As for the engine, the most suitable option would be a diesel engine that has at least 14 horsepower.

Making a clutch for a mini tractor

The clutch basket housing is connected to the motor through an adapter with coaxial mounting holes. The device itself is used from the GAZ-51, the mechanism is turned off by a hydraulic drive.

  • units and parts are used from used cars and agricultural machinery;
  • the frame of the breaking type is assembled from two semi-frames and a cross from the MAZ truck. Provides high cross-country ability and maneuverability of the machine, copying the terrain with pneumatic wheels, directional movement control;
  • cardan shaft with a pair of end crosses, transmits the power moment from the box to the bridge, regardless of the “break” of the frame;
  • a drum-type service brake is mounted on the box shaft;
  • the drive axle is used from an electric car, rigidly fixed to the semi-frame;
  • the front axle suspension is independent. Shock absorbers, springs, levers are applied from ZAZ;
  • the machine can be converted into tracked and all-wheel drive versions.

The “Volchok” unit is converted into an all-wheel drive mini-tractor with its own hands in the following order:

tracked, mini, tractor, tiller
  • A transfer case from the GAZ-69 is installed behind the gearbox through an intermediate propeller shaft, which transmits the power moment to the drive axles, the presence of a reduction gear in the device makes it possible to increase the tractive effort, if necessary.
  • A bridge is mounted on the front half-frame. an analogue of the rear axle of a minitractor.
  • The main gear of the front axle is connected to the transfer case via a cardan gear.

Do-it-yourself conversion of the “Volchka” into a caterpillar mini-tractor:

  • Make a crawler-type propulsor. For this purpose, a large diameter tire with trimmed sides is used. We use solid rubber wheels from transport trolleys as rollers.
  • We fix the semi-frames rigidly relative to each other (the power hinge does not work).
  • We dismantle the front suspension, on the front half-frame we attach the roller assemblies with a track tensioning mechanism.
  • We dismantle the rear axle, in its place we install a shortened axle from the GAZ-21 with the main gear and differential, we connect the hydraulic control of drum brakes separately for each side. We install rollers in place of the wheel disks.
  • Two pedals for controlling drum brakes of the rear axle due to the operation of the differential provide a change in movement in the direction.
  • Dressing and tensioning the track.
READ  Valve Adjustment On A Gasoline Tiller

Other mechanisms

Masters often use a device from a GAZ-53 truck as a checkpoint, the clutch is removed from a GAZ-52.

The installation of the chassis will be facilitated by the use of the ready-made rear axle of the Volga GAZ-21, but it will have to be shortened to 800 mm and the rivets on the fixing stockings removed.

Mini tractor from Tiller Bison

Tillers of this brand have a reliable and powerful enough motor, the presence of which allows the unit to be converted into an all-wheel drive minitractor. Before work, be sure to study the detailed drawings, and also buy steel sheets, pipes and corners. The procedure for making a mini tractor is as follows:

Mounting Tracks to walk-behind tractor

  • When arranging the frame, you will need to expand the existing tiller frame. This is necessary in order to install additional wheels. Cut the corners and pipes into suitable pieces, then weld them to each other;
  • The front beam on the mini tractor is mounted by means of a ready-made hub equipped with brakes. Wheels in the front of the unit must correspond to the size of the rear wheels, or be slightly larger than the latter. this will prevent the mini-tractor from “burrowing” when driving over rough terrain;
  • Then install the tiller motor. It is best to mount it at the front to achieve the best balance of the overall structure;
  • Weld the towbar to the rear of the finished mini-tractor. it will be required for mounting the trailer.

Choosing the parameters of the future car

Consider what factors and parameters determine the stability of the minitractor.

Minitractor “Volchok” with a breaking frame

Recommended drawings and dimensions

Layout of nodes (Figure 1)

Layout of nodes (Figure 2)

  • 1. articulated frame hinge mechanism (cardan crosspiece of MAZ car);
  • 2. drum-type braking mechanism (GAZ-51);
  • 3. pedal drive of the clutch mechanism;
  • 4. front axle wheel suspension assembly (ZAZ-968);
  • 5. two-cylinder diesel engine of 20 liters. from.;
  • 6. starter starter (GAZ-51);
  • 7- exhaust suppression unit (ZAZ-968);
  • 8. electric generator (GAZ-53);
  • 9. cooling fan;
  • 10. pump of the cooling system;
  • 11. air filter housing;
  • 12. fuel tank;
  • 13. hand brake drive;
  • 14. crosspiece of the hydraulic system;
  • 15. battery box;
  • 16. hydraulic system tank and pump NSh-10;
  • 17. power take-off;
  • 18. checkpoint (GAZ-51);
  • 19. wheel (Belorus);
  • 20. hoses of the hydraulic system;
  • 21. hydraulic valve;
  • 22. hinge unit (Belorus);
  • 23. operator’s place;
  • 24. gearshift lever;
  • 25. power steering (electric car);
  • 26. instrument panel (Belorus);
  • 27. radiator of the cooling system (Zhiguli);
  • 28. oil filter;
  • 29. fuel supply pump;
  • 30. gas pedal;
  • 31. wheel (electric car).

a. turn left; b. turn right.

a steering wheel with a control unit for a hydraulic turning cylinder; 2. half-frame stand; 3. hydraulic cylinder rod attachment unit; 4. steering cylinder; 5. back half-frame; 6. power hinge of the breaking frame; 7. flexible hoses of the hydraulic system

Step by step manufacturing

The process of making a homemade mini tractor on a caterpillar track is not complicated. Craftsmen often make it based on the old tiller by installing a special adapter. There are also such structures, the nodes of which are completely assembled by hand.

To improve theoretical skills and knowledge of engineering mechanics, experts recommend reading technical literature, using the Internet, familiarizing yourself with the operating manual for welding equipment.

The performance of a home-made caterpillar mini-tractor differs little from factory models, the costs of creating them are minimal, especially in cases of using ready-made assemblies, hydraulic connectors and adapters from faulty equipment.

The set of mechanisms, materials and necessary tools is as follows:

  • welding machine;
  • consumables. electrodes, wire, gas, oxygen;
  • electric drill with drills;
  • wrenches and screwdriver;
  • Angle Grinder;
  • discs for cutting metal;
  • fasteners;
  • metal rolling for the frame;
  • lubricants;
  • primer and paint.

Work units are made separately and assembled. When assembling, the drawings of each part must be checked against the manufactured mechanisms.

How to choose an engine

In order to create a snowmobile, it is necessary to consider the most important and central part of the entire mechanism. the motor. The motor must have a decent amount of traction to move the entire machine in tough snowy conditions. To make everything work out as needed, a powerful motor from Tiller Neva will do.

With such an engine, one or two people will be able to move around on a homemade snowmobile from a tiller with their own hands. Engine power has 6-7 horsepower, which is quite enough for moving on snow.

If you add a snowmobile stand to the tiller, the load capacity increases and you can easily load your tiller for snow rides.

Why is this engine good, many people ask. In fact, there are many more advantages than one might think:

  • First of all, this is a democratic cost.
  • Good quality is also proven by Japanese production.
  • The motor has an additional air cooling system.

Also note that gasoline can be used as fuel.

A do-it-yourself snowmobile from a tiller. the best home-made devices and mechanisms. 110 photos and videos of the construction of a snowmobile

In modern times, few gardeners and gardeners do without a tiller. In warm weather, this technique is very often and densely used in ordinary daily affairs and never stands idle. But in the winter period, it is difficult for a tiller to find an application, and this suggests that the car will simply stand idle.

Home remodeling masters have come up with a use for the tiller and in the cold. I don’t want to move through the snow on my own, especially since in some places the snow reaches impassable volumes.

That is why a snowmobile is made from a tiller for the winter. This is a benefit both for the owner and for the equipment itself, since the tiller does not stand idle.

In the photo of a snowmobile from a tiller made with your own hands, you can clearly see that everyone makes such a model as he wants. For those who decided to create such a useful unit, you will need to choose which option is closer to him.

In this article, we will cover some important points for creating a snowmobile.

Summary of the review:

  • How to choose an engine
  • Features of the constructive plan
  • How to decide on a move option
  • Do-it-yourself photo of a snowmobile from a tiller

Features of the constructive plan

The simplest version of a snowmobile consists of a part that leads and one that is driven first. The second part consists of a seat, shock absorbers, a steering part and runners, thanks to which this part moves. The second part is much more complicated, since it contains all the elements that set the snowmobile in motion.

First of all, in the second part, it is necessary to correctly provide for the power unit, that is, the motor itself. The frame on which everything will be equipped and the drive is also important.

Diagrams and drawings of a snowmobile from a tiller with your own hands must be done in advance, and you can find the necessary option on the network or in various kinds of literature.

To begin with, before drawing up a drawing, determine the purpose for which the snowmobile will be used. After the drawings, you will need to select parts, and, if possible, do some with your own hands.