Double cunning for a walk -behind tractor. Where to finalize

Potato hilling technique by walk

Each vegetable breeder engaged in the cultivation of potatoes is interested in the fact that the crop of culture is as much as possible, and the labor and temporary costs of receiving it. less. The use of special equipment helps to achieve the desired results. About how to spill potatoes with a motor block, we will tell in the article.

The term “unoic tractor” itself, if we consider it in a general terms, denotes a single unit with built.in elements: clutch, transmission and engine. The device is characterized by the presence of a transmission output for connecting additional equipment from a multifo.coil.

Reference. The uniform tractor is a self.propelled power transport unit based on a single.axis chassis equipped with additional hinged devices to perform various agricultural work. This universal device is also called a mini-tractor.

The equipment is equipped with two long handles for control. The engine is launched by a lace, like an electric starter or a chainsaw, and the presence of a gearbox provides the ability to adjust the speed of movement.

Devices are distinguished by type of engine, which can be:

Motoblocks with a gasoline engine are used most often.

Connecting active attachments is also different. There are motoblocks with:

Another difference is by the location of the milling plants:

With the help of a walk.behind tractor, depending on its power and the use of different types of attachments, you can:

One of the functions of the walk.behind tractor is cumming up potatoes using a hinged cigarette light, which raises furrows to provide air access to plant tubers. The unit greatly facilitates the process: when passing it in one direction, a furrow is laid, and upon returning, the depression is evenly covered with soil to a certain height.

To install the cupboard on a single tractor:

• Plug rack is inserted into a special lock and fixed with 2 bolts.
• Connect the coupling.
• Fasten the finished design to the walk.behind tractor.

Why the potatoes are spent on

Hilling. pouring the earth to the lower parts of the plant. refers to the mandatory procedures used in the cultivation of potatoes, and is carried out in order to increase crop yields.

The loosening of the soil around the bushes is necessary to:

• Increase resistance to frost and adverse atmospheric influences. In the spring, when the probability of late frosts remains, and tender sprouts have already appeared, it is useful to sprinkle them with the soil in order to increase the depth of planting and ensure resistance to degrees, wind and rain.
• Remove the crust on the surface of the soil. Loof soil passes the air well, which makes the plant roots saturated with oxygen, and also facilitates moisture access to the root system.
• Increase the number of tables. shoots on which tubers are formed. A layer of soil poured from above ensures the development of a more powerful root system, the establishment of new tubers on lateral shoots, activation of metabolism and increasing green mass.
• Prevent the greening of tubers. Suspending the lower part of the plant with earth preserves vegetables from the appearance of a greenish tint. It occurs on tubers sitting shallow and crawling to the surface. Such potatoes contain poisons and is not suitable for eating.
• Get rid of weeds. This will protect the culture from oppression, damage to the product and, as a result, will extend the height of the product.
• Simplify the care of the plant and harvest. As a result of regular hijacking, the rows of potatoes are clearly distinguished, which makes the culture to be convenient and facilitates the dug for bushes after the tops dry out.

When

The first hilling is carried out by reaching the sprouts of 5-10 cm, the second-when the bushes will rise by 20-30 cm. In the future, the procedure is repeated every 2 weeks up to the start of flowering.

For early varieties of potatoes, there is enough one.time hijacking. Carry it out before flowering, during the formation of tubers.

Attention! To develop potatoes successfully, it must be spent several times per season.

How to sprout correctly

• The most favorable time for the procedure is after rain, when the soil is slightly wet. In the absence of precipitation, soil moisturizes artificially.
• In hot weather, the plant should not be spud, as this will lead to its wilting.
• It is best to carry out the procedure in cloudy weather, as well as after sunset or early in the morning.
• Rows cannot be made very thin so that the bushes do not begin to dry out.
• It is necessary to maintain the same distance between the rows so as not to injure tubers.
• With the first hilling, when there is still a danger of frosts, the soil is poured as high as possible. This will not impede the successful growth and development of the plant.
• At a high air temperature, sprinkle the lower parts of the bush with soil slightly, otherwise the growth of shoots will slow down.

What it is?

The cigns for the walk.behind tractor is called a device, through which you can effectively plow and cultivate the ground of different lengths and the degree of complexity of the soil. Through this nozzle, you can carry out hilling the crops grown, as well as loosen, dig the soil and fight weeds. In fact, this is a nozzle made of metal, which is characterized by a wedge.shaped form. Depending on the variety, it has blades or is equipped with rotating disks that attach to the frame.

Install cakes and proofs on a single tractor through special fasteners. Awaken equipment implies different heights of hilling and the depth of penetration into the ground. Simultaneously with loosening, the soil is raised to the desired height and aeration. Depending on the variety of the model, it may include variating the width and height of the hopping, changing the angle of inclination.

However, models select specifically for a certain variety of motoblock.

They are characterized by the efficiency and quality of soil processing.

You can classify the varieties of the cigarette and the constructive features and the principle of action. Based on this, 3 types can be distinguished: disk, lister and propeller. Each modification has its own characteristic features.

Lister

This option is considered the simplest from a constructive point of view. It is distinguished by a fixed capture width, outwardly it looks like a butterfly wings. In the process, he lifts the soil and thereby creates the necessary earthen comb. At the expense of the ends with a sharp form, it falls to the depth adjusted in advance, loosening the ground, raises it.

The disadvantage of the device is the need to adjust to the width of the aisles. Almost most of these models have a width of the seizure of a factory product of no more than 30 cm.

convenient are options with devices that differ in the ability to change the width of the capture. They are convenient and allow you not to adapt to the features of the cummer. However, cellets of this type need a higher power of the walk.behind tractor.

Disk

Based on the name, the leading elements of the cumber are discs whose rims are lowered to the adjusted depth in the soil, while having a minimum resistance of the soil. For effective work, this hitch needs the most accurate setting up of the rounded angle, as well as the angle of inclination of the disks vertically. The width of the capture in this case is set taking into account the parameters of the cultivated series.

Such cigns are suitable for all motoblocks and allow you to increase the power of the unit. They are synchronized with the capabilities of the walk.behind tractor, allowing speed and power. Soil processing with their help is more effective, they are convenient and low.energy. In addition, the emphasis is not needed here.

The models are universal, and therefore you can use them not only for plowing and hilling. they can be used even during the vegetation of cultivated crops. In addition, this can be done during the season several times (on different phases of growth).

Propeller

Often curtors of this type are called active or rotary. 2 forces are involved here: rotation and progressive movement. This attachment equipment is an order of magnitude more expensive than previous analogues due to their effectiveness. However, you can use this type of hitch solely on motoblocks equipped with two front gears, as well as a power selection shaft. Outwardly, rotary devices are similar to fans.

Constructively, they are more complex than two other varieties. Their principle of operation is carried out due to one round of active disc. The soil with the removal of weeds is originally occurred. Only after that the perch is loosening the earth.

A feature of such envelopers is the fact that they can not only envelop the crops grown, but also transfer the Earth from place to place.

Nuances of one and two-row devices

Depending on the variety of the model, there can be one- and double-row. The attachment of the second type is good because the operator processes two aisles at once in one pass, raising the land to culture and forming furrows.

In fact, a two.row enlivator looks like a bracket stand, which is attached to the coupling and has 2 racks with envelopers connecting to clutch through bolts.

The convenience of such models is the ability to adjust the width width, which allows you to fit it to the desired parameters of the beds.

A single.row option for the passage can only process 1 row. In principle, this is convenient, given that the operator has to spend less time to monitor the progress of the work performed. So the position and movement of the unit will be more correct, which will reduce the percentage of damage to the culture during the hilling process.

Single.row models are especially convenient where the ranks are crooked, and they are more simple in management, although due to design features they differ in size and have a lot of configurations.

The screw hillock is considered low.performance and is characterized by a high energy intensity of the technological process of reinforcing agricultural crops.

As for the Dutch models, their wings are able to rotate in vertical and horizontal planes. This determines the quality of land treatment with a reduction in energy consumption. These models are available to most buyers and are good enough at work.

How to configure the cigarette butt?

Using the washers and bolts on the bracket clutches. The hip is clinging to the walk.behind tractor. If you work with an adjustable cigarette light, it is important to take into account such parameters as the depth of immersion in the ground and the width of the immersion angle. The disc hirring must be placed so that its racks are located vertically.

Next, you will have to configure the width of the angle and the depth of immersion, for this they use talrepa and special screws, which regulate all indicators. You will have to configure to certain crops for which hilling is carried out.

Propeller cigarette light

If your one.axle tractor has two front gears. this type of cummer will be the perfect option. The basis of the perceptic censer can be called special propellers, the task of which is to pre.chop the soil, and then get all the unnecessary weeds. The resulting loose soil is available for use, that is, ready to hill.

Try to use the streamlined envelopers, they allow you to leave moisture in the ground, because they have less intensity when working with the soil.

Classification of cummers

Double.row

A two-row or leather perch there is two types of it-2 and STV. The first model is designed to plow the prepared soils of a small area. for example, a garden, a garden or a greenhouse. The maximum penetration of discs is carried out to a depth of 12 cm. The height of the technique is half a meter in height, it is possible to adjust the depth of plowing. Weight. 4.5 kg.

The second model is produced by two types of distinguishing between the width of the working organs and the body. Maximum penetration into the ground. 15 cm. The distance between the disks is adjustable manually. Technique weight from 10 to 13 kg. The discount of the sliding disk fixes to the walk.behind tractor using a universal coupling. Disks have the ability to manually adjust. Maximum immersion depth. 30 cm. The height of the equipment is about 62 cm, the width is 70 cm.

Single.row

The tool is made of a rack, two disks (sometimes one is used) and the axis shaft. The stand is fixed using a bracket and a special bracket. This detail is adjusted to the position of the rack in various directions. The shaft allows you to adjust the angle of inclination of the working part. The design is set up by sliding of the bearings. The weight of disk envelopers up to 10 kg. Furrows turn up to 20 cm high. The angle of inclination of the disk varies to 35 degrees. Tool height up to 70 cm.

The enchanter for MB-2

This hillion has a more weak engine in comparison with the M-23 model, but both of these tools are the same in their qualities and constructive forms. The execution is represented by a firmly cooked frame with wheels in a rubber tire. The configuration includes saber.shaped parts on the axis, which will replace ordinary wheels during the cultivation of the site.

Claim with fixed or alternating capture

This instrument leaves behind a fixed height of the crests, the adjustment of the aisles is carried out before starting work. A fixed perch is suitable for plowing small private sections. A variable model allows you to correct the width of the capture for any size of the beds. Of the minuses, a crowning of the resulting furrow is noted, leading to a decrease in the effectiveness of the plowing process. Fleet models are divided into two types: single.row and two.row species. The second variety copes with loamy soils heavier.

Propeller type

It is placed on motoblocks with two front gears. Cumberry discs have an uneven pattern similar to rounded teeth. Their task is to grind the soil with simultaneous uprooting of weeds. Loose soil is immediately suitable for use. The streamlined shape of the disks allows you to save moisture in the soil due to the least intensity of work.

Installation

Before gathering a walk.behind tractor with the chosen cigarette, you need to make sure that the equipment is turned off. First of all, a clutch of the tool with a walk.behind hand is made using a bolt. The working part should be placed higher than the level in relation to the walk.behind tractor. Clutch rings symmetrically coincide with each other. Next, the distance and the width between the working details are adjusted. The capture width is controlled by bolts by loosening or rearranging the disk housing.

It is worth paying special attention to the symmetry of the distance from the axis to the cases. With non.compliance with the indicators, the uniform tractor in the work will be unstable, constantly roll on one side, depriving the opportunity to carry out the land roller. Adjustment of the angle of attack of the working bodies is carried out to obtain the same in height of the ridges. This procedure and changing the distance between the disks can be performed during the work of the walk.behind tractor.

Two cunning

Most often, two.river cakes are represented by a cooked hitch, without the possibility of independent removal and installation of other types of canopies. If the hitch is removable, then fixation occurs on the bracket using special screws. The distance and height of the working surface are adjusted. The distance between the disks should correspond to the width of the row. Adjustment during operation is impossible. With a strong deepening of the disks during hilling or exit from the soil, the instrument rack must be rejected in the opposite direction depending on the problem, back or forward.

Do.it.yourself hill

For the manufacture of this equipment, you need to adhere to clear rules and if possible use the drawings. This will allow you to correctly and quickly install all the details, so as not to subsequently redo the work. You can independently make models of a lyister (classic) or disk type.

Creation of a leather cigarette light

Such an enchanter for a walk.behind tractor is a traditional unregulated device used most often. To create it, you need to draw or use ready.made drawings on which all the work will be very simple.

• We make the base from a metal sheet with a thickness of 3 mm. It will meet the resistance of the Earth, so it should be as strong as possible.
• The bracket is made from a steel strip with a width of 4 mm, the part must be tempered.
• The field board is made of metal with a thickness of 5 mm, it is hardened in several stages using a gas burner.
• The rack is made of metal with a thickness of 8 mm, since it is the element on which the entire load falls.
• We create wings for the cunning of steel 2 mm thick, they must correspond to the size of the selected scheme, because this is how they can be converted with the base.
• Then they are slightly bent and welded to the base.

If you need an adjustable perch, it is necessary to fix the wings to the base using hinges, the rods for adjusting the angle are installed in the tail of the base.

You can also make a two.row perch, thanks to which the speed of work will double. In this case, you need to add traction devices to the finished design, and the fasteners make it mobile, which will allow you to adjust the width of the rows.

Production of a disk cercketeer

Creating such a model, special attention is paid to disks to formulate. For them, spent cuts from seeders or disc saws, which are attached to the bearings with seals, are well suited for them.

• Disks need to be installed at an angle, withstanding the distance between their lower points. Also an important condition is their symmetry, otherwise the unoic tractor can lead a little in different directions.
• All elements must be connected by welding or bolts, the discs are connected by adjustable adapters.
• Screw tarlets, leash and racks are also fixed.
• Next, you need to use a beam with wings to fix the tool on a walk.behind tractor.

An equally important point is the correct selection of the angles of inclination and the depth of immersion, for which mobile elements with bolt fixation are planted on the bracket.

Production of propeller cakes

For work you will need high.quality thick metal, corner grinder and welding machine.

• First, the axes are made that need to be adjusted to the walk.behind tractor.
• Then you should make a rack and base, which are welded by arc welding.
• Immediately select the distance between the nozzles, the shape of the soil.spaces and the installation angle, which will allow the maximum effect of loosening the earth.

For convenience, you can make several bushings with brackets and different sets of blades, which will make various types of hilling.

In order to correctly make a cupboard for a walk.behind tractor, you should also watch a video in which you will find a full.fledged instructions for creating a cigarette light.

Necessary materials

Before proceeding with the analysis of one or another method of independent manufacture of the cigarette light, we need to list the minimum list of what we will certainly need during work.

Of course, no one forces us to retrained to the blacksmith in order to chop all the necessary details with the ancient method that was used a few decades ago. But we still need an elementary list of welded and locksmith equipment:

• Welding machine (preferably that this device is intended for arc welding).
• Corner grinder with a set of various disks and nozzles.
• Electric drill with a set of reliable drills.
• Electric emery.
• Gas burner that is necessary for warming up metal when hardening.
• Vise or workbench.
• Various files and other consumables (bolts and other fasteners).

This list applies directly to the tools we need. In addition, the material itself will be needed from which independent assembly will be made, but we will talk about this in more detail in the process of describing the methods of manufacturing cakes.

Fully on a darling

If you only plan to buy a walk.behind tractor, and you need to hill potatoes, you will suit a manual plow perch with the possibility of alteration on a mechanical thrust. At the same time, the flexible rope strap is replaced by a rigid robber, and the plow.toe with a scale of wings up to 25 cm (no longer pull) on the Lister or Chisel.

Drawings of a manual cunning of this type are shown on the left in rice. This, in fact, is a “half.hand” unit: it is suitable without alteration for thrust from agricultural. If its power is sufficient, you can immediately put a wider wider. The wheel when converted under the unoic tractor can be left, but then it will be necessary to work together: one leads a traction unit; The second is the perch. So, by the way, more conveniently: the work is arguing faster, and its result is better.

If you are not expected to pay 4-12 acres of payback of the walk-behind tractor, then you can make (or purchase) a completely manual perch, see. On the right in Fig. Its peculiarity is the operational adjustment of talremma 1 simultaneously the size of the dump and traction force in accordance with the properties of the soil. The basic dimensions are the same as. case. The fracture drove the same, 5 degrees. Broken Robbeynik approx. 80 degrees, and the fracture of the front handles is selected by the growth and physique of the source of traction.

Note: you do not think paradoxical that in the era, when people master the quantum world and seriously discuss the possibilities of interstellar travel, the agricultural machinery market is actively offered and well.soldered instruments for cultivating land on human muscular traction? The slave owners of ancient Rome would go out to the exposure of the tummy.

Preparation of the walk.behind tractor for work

Initially, you need to verify the performance of the equipment. Many owners simply throw one.time tractor in the fall after harvesting. It is not recommended to leave a single tractor with an empty fuel tank. During downtime, an empty tank rusts. Before the first launch, you need to drain the old fuel, rinse the filter and pour new pure gasoline or diesel fuel. Clean the rust of an empty tank and rinse with clean gasoline.

Having eliminated all the malfunctions, you need to prepare the unit for working with the cigarette. For the work of a walk.behind tractor with a ciga, you need to change standard wheels to soil.spaces. If the soil is soft and wet, additional iron extension cords stop on the soil. Permissible track width up to 65 centimeters. Central emphasis is dismantled from the walk.behind tractor. The clutch is installed instead. Metal pins are found in it and after that the cup is attached. The process is not laborious, it will not take much time and effort.

Planting potatoes

Before planting, first you need to mark the site. This is done in order not to lose precious meters of land due to unevenly done furrows. Next, you need to do the following actions:

• Pass along the site with a walk.behind tractor, making a furrow with rowers with rowers. The distance between the centers of the grooves should be comparable to the width of the rut of the walk.behind.
• Potatoes are laid in the furrow made. Distance between tubers of at least 30 centimeters.
• Next, you need to fill the potatoes. To do this, you need to replace the primerials with ordinary wheels. After setting up the wings of the equipment. For falling asleep, the maximum width width is required. Next, you need to go through the rows, fill the furrows with soil potatoes.

Cleaning potatoes

Cleaning potatoes falls at the beginning of autumn. Time to dig up potatoes can be determined by dried tops. Using the cigarette, you can not only plant and hill, but also dig up the crop. First you need to dig up a dried top. She will interfere during the cleaning process. A single rogue tread is more suitable for digging. If there is a two.row, it needs to be upgraded. Just remove one comb, and fix the remaining in the center of the rack. Next, change the wheels to the soils. Place the one.axle tractor right in the middle of the bed and move at the first speed.

The main nuance of harvesting is that you need to move through a row.

Dug potatoes will lie on both sides of the bed. Moving for each row, the dug crown will be buried again. Passing the entire site and collecting tubers, repeat the procedure, passing the rows not dug. Everything is quite simple.

At the end, some tips when choosing equipment and working with it:

• It is necessary to choose a cupboard, given what so much it will be used to use. Lister is not suitable for solid and clay soils.
• Based on the power of an existing motoblock. It is also worth considering the number of gearbox speeds.

Modern motoblocks are originally equipped with cummers. You can buy a bum block of a two.rowing walkway directly with the walk.behind tractor itself in the kit.

When working, you need to remember:

• On low.power motoblocks do not put a large amount of milling. This will increase the load. The most optimal option is 4 cutters.
• You need to plow the soil in 2 passes. While moving at low speeds. Too much turnover make dust out of the ground. Dust settles, and after the rain the soil will be covered with a crust. It harms potatoes.
• Among the gardeners there is an opinion that soil.spaces are harmful to landing. They loosen the soil and can dig only a planted crop. This is not true. This can only happen if the site is incorrectly marked. In conditions of even passage, the track does not coincide with the furrows done.

Of course, the use of the cigop has many advantages. The main of which is small energy consumption and saving time. A two.row perch will greatly increase the speed of soil preparation, planting, hilling and harvesting. Also, the use of such technology helps older people in their work in areas.

Which cumberchina is better for a walk.behind tractor

Wagging by a motornote will be effective if the attachment equipment was correctly selected. There are several types of cigns that are presented on the market in a large assortment.

Lister (with a fixed width)

Equipment can be used on units with a capacity of up to 3.5 liters. With., It is suitable for processing narrow aisles (width 25-30 cm). The design consists of two special wings, which are motionlessly fixed. The stand of the model is very thin.

The lack of equipment can be called the sticking of the earth with its high humidity.

Cligwice to a variable capture width

The equipment allows you to adjust the width of the aisles, so with its help you can process beds, the dimensions and width of which are diverse.

The hip is suitable for motoblocks of different types, for example, for units Neva MB 2 and MB 1, Agro, is also used for models with high power.

The disadvantage of the device can be called high energy consumption.

Disk

A convenient and very simple tool huddles plants, prepares furrows for the subsequent planting of seeds. Its design consists of special disks that are installed at an angle.

Today, this model is the most effective for hilling, but has a greater cost.

Dutch

In this cigarette, the wings rotate in the vertical and horizontal plane, so that the plowing of the Earth occurs more qualitatively and without large energy costs. Despite such an effectiveness, the cost of the cumber is affordable.

Rotor active perch

It is also called propeller and attributed to the equipment of a new generation. During operation, the hillock not only loosen the soil, but also pushes it to the roots of plants.

The disadvantage of the model is not suitable for all motoblocks, since it is possible to work with equipment only in second gear, which not every unit is available.

This is not to say which cigns will be better for working on the site. The choice of equipment depends on the type of work, conditions and prices. The alternative can be the use of home.made envelopers that can be attached to any walk.behind tractor.

How to make a potato enlistor with your own hands

It is important to adhere to the rules and strictly follow the installation instructions. Drawings and sizes should be precise.

To make a nozzle yourself, you will need:

To observe the dimensions and symmetry is strictly necessary, otherwise deviations from the norm will affect the work of the unit.

Tools and materials

Before starting work, they prepare the inventory and the necessary materials:

• arc welding apparatus;
• bolts, fasteners;
• corner grinder with disks and nozzles;
• Files of different sizes;
• electric drills with drills;
• Workbench;
• emery working from the network;
• Gas burner.

A strong metal is required to create a nozzle, highly alloyed steel is preferred. The material is resistant to mechanical exposure and rust.

We construct a leather cake

It is easy to make the mechanism. Step-by-step instruction:

• Take a durable metal sheet 3 mm thick. Cut the workpiece from it, according to the drawing.
• Sharpen on the side where the lower edge will be.
• Bend in the middle through a fixed pipe. Punch the front edge with a hammer.
• Put the wings of the nozzle.
• Close to fix the distance between the blades, welding it behind the planes.
• Pierce the bottom of the part so that the blades turn out to be tone.like.
• On the front of the cigarette, fix the rack with holes with welding.
• The barbells going to the walk.behind tract with bolts to the rack.

If an adjustable nozzle is required, the wings are fixed using hinges and rods.

Delted

Instructions for creating a design:

• Cut down or cut a strip from a sheet of iron 2 mm thick.
• On each side, form a rectangular crack.
• Bend the canvas in the middle so as to go around the square bar in the back under a slope of 90 °, forming the front double eyelet.
• Put on it a stack of a hinged device.
• Drill a bolt hole in the mount.
• On the left and right sides of the bar cavity, make holes with the same distance between them.
• Perform the thread manually. Use a tap.
• At the back of the fastening through the cut in the rod, tighten the bolt until it stops.
• In the middle part of the crossbar, weld the rack to provide a reliable clutch of the nozzle with a walk.behind tractor.

Moving the structure along the rod, adjust the width of the rows and double twisting. The dump mode is installed due to the spreading of the wings. For the correct operation of the mechanism, special attention is paid to the quality of fastening the rack in the eye.

Plug.shaped

The phased creation of a mechanism:

• Make a frame. Take an iron pipe in size 52×40 mm with a wall thickness of about 7 mm. Cut the opposite partitions, make a fork.
• Mark the middle on the frame. The hole in the front of the frame structure is brew.
• Fix the plow rack. In a wide piece of pipe, drill through the bearing holes with an area of ​​3.1×1.6 cm. The size of the holes in the narrow walls of the bed is no more than 1.02 cm.
• Make a handle from a pipe with a half.inch diameter.
• Construct the clutch. Use the channel fastening with the letter “P” and install under the steering part.
• For the main working parts, take a metal sheet up to 5 mm thick. First make a piece. For this, an old disc is suitable for a circular saw. For sharpening, apply an anvil.
• Create a dump from a pipe 0.6 m long. To do this, take a cardboard or paper as a template, attach to the pipe, circle. Cut the welding machine. Process with emery or corner grinder.
• Collect the plow. Private the details to the steel sheet with an area of ​​0.25 m². Disconnect the foundation on which preparatory work was carried out with a hammer or chisel.
• Clean the seams, polish the dump and a lot.

Important! Compliance with the accuracy of sizes is required.

Dutch

For the manufacture of the nozzle, they adhere to the sequence of actions:

• Cut the wings from a sheet of iron 3 mm.
• Put the edge under the lower edge.
• Bend in the middle.
• Beat the front edge with a hammer.
• Dilute the blades of the nozzle.
• Weld the cross member behind the wings, adjusting the distance between them.
• Pierce the bottom of the part and make it similar to a plunder.
• Fixing rack with holes with welding on the front of the cigarette light.
• The bar that goes to the walk.behind tract is fastened with bolts to the rack.
• Adjust the nozzle by attaching wings on the hinges to the bar.

Disk hand hip for potatoes

The mechanism consists of 2 circles with a hub, a transverse beam, a handle and racks. Phased manufacture:

• Take a steel sheet 3 mm thick. As an alternative, use covers from pots of 50-60 cm measuring or disks from an old seeder.
• Cut the circles with a diameter of 45-50 cm.
• Sharpen the edges at an angle of 45 ° with a machine or corner grinder.
• In the center to weld the hubs.
• Made the brackets of mounts from pipes in size 32×45 and 45×55 mm. In the middle of the pipe of the larger length, fix the smaller welding. In a pipe with a diameter of 45 mm, drill a hole of 12 mm. Weld the nut so that the bolt is screwed completely.
• Make a rack. Bend 2 jumpers from pipes 32×250 mm at an angle of 30 °. Bleet 45×55 mm bushes with welding from one edge, from the opposite. perpendicular to the end. Make holes with a drill and weld the nuts to them.
• Collect a pen of thin pipes and bushings 45×120 mm, in which it is 12 mm wells for 12 mm.
• Carry out a general assembly. Color metal surfaces. Insert the transverse beam into the sleeve’s sleeve, fix with locking bolts. Fix disk hubs on racks. Screw the crossbars so that they fall into the holes of the sleeve. Stand with disks on the transverse beam. Score.
• If desired, the fastening of circles is made by adjustable.

Features of operation

Before proceeding to hill potatoes by means of fucker, it must be correctly configured. To do this, the lower points of the disks are diluted from each other to a distance equal to the width of the rowers, and the angle of attack is calculated, the value of which depends on the type and structure of the soil. So, for dry soil, the angle of the angle should be slightly increased, and for a moisturized one. put in a minimum position. Otherwise, there is a risk of damage to the stems of the plant with large navals wet, and therefore heavy land.

You need to tune the discs absolutely symmetrically, otherwise the cigarette butt will begin to take it to the neighboring row, and it will damage the tops and tubers.

Processing the potato field with a perch does not cause difficulties even in beginners. The main thing is to carefully read the instructions for its operation, and follow a number of simple rules.

• So, the first hilling of potatoes is carried out immediately after it will grow up. In particularly cold years, with the threat of return frosts of the crests, it is recommended to do higher during the first processing. This will protect the culture from freezing and ensure the maintenance of temperatures comfortable for plants inside the earthen shaft.
• After the tops grow to about 30 cm, the hilling should be repeated. In this case, you need to be especially careful, trying to work so that the stems remain in an upright position and do not fly.
• Enchanting should be carried out in the morning or evening hours on moisturized soil. In the case of a long drought, the plantation is watered before processing.
• Remote weeds, as a rule, are not collected and left in the aisles. This protects the tops from adverse weather conditions and helps to preserve a favorable microclimate in the soil.

Criterias of choice

Before proceeding with the acquisition of a disc hirring, it must be borne in mind that, despite its high operational characteristics and the ability to process the soil of any type, this type of attachment is quite expensive. So, if the lister.mesh one.stroke perch is only 1400, and when buying a two.row, you will have to give 1800, then the acquisition of a disk model with a fur coat of VRMZ with a function of adjusting the capture width will cost 4200. Therefore, the purchase of a disc hijacker is advisable only if it is necessary to carry out large.scale work, for example, for processing fields with an area of ​​more than 1 ha and cutting the furrows, as well as if there are several crops in the site at once, which need to hill. For a field with an area of ​​6 acres planted with one potato, you can limit yourself to the choice of a one- or two-row leather model.

The disc hirring is the right tool that allows to greatly facilitate hard manual labor in the personal plot and helps to increase productivity.