How to change the nozzle on the trimmer Stihl. We refuel a fishing line for a trimmer to an electric cost

Installation of a coil with a fishing line on a trimmer for STIHL grass

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer. If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed. A similar one happens when using steel or copper wire, only with the difference that the torn pieces will be larger and can cause a significant injury. And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury. It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once. In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post.Soviet space “How to refuel a fishing line for a trimmer in a trimmer for grass”. Not many trimmers manufacturers in their operating instructions answer this question. Therefore, it is hard for ordinary gardeners to figure out how to do it right.

I want to start with a brief description of the technical characteristics of trimmers.

So, trimmers for grass are electric and gasoline. The cutting element of trimmers can be a fishing line for a trimmer and a knife. The fishing line for the trimmer is ordinary, four. five.sided and intertwined (in the form of pigtails). Knives are from 2, 3 and four lobed knife. Knives are also plastic and metal.

The system for feeding fishing line from a trimmer for grass is manual, semi.automatic and automatic.

Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line for the trimmer and the number of knife blades, according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And these are additional and significant costs.

Today, the market is presented on the market: the grass:

With one nozzle. only Leskova. With two nozzles-Leskova and three-four-blade knife. With one nozzle-only a three-four-blade knife.

Our Kulibins have long learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing fishing line for a trimmer. But at the same time, they do not think about the safety of their loved ones, because as a cable with the power of a working trimmer for grass can easily break out and not only injure the mower and others, but leave a cripple for life. The use of a fishing fishing line can and gives the best effect, I have never tried personally than a fishing line for a trimmer for a trimmer for grass, but such work has a number of inconvenience: when in contact with solid objects, it is located or may simply be pulled out of the reel.

So, what is called closer to the topic. I give an example of how to refuel a fishing line for a trimmer in a trimmer for grass (a trimmer for Bosch Art 30 grass). Everything is very simple. Started.

After you have chosen a fishing line for a trimmer for refueling, you need to cut off the required amount of fishing line, because, as the entire fishing line for a trimmer in a skein is not wound into a coil.

Remove the coil and a protective casing from the coil.

Removed. We fix one end of the fishing line in the gap and neatly and evenly wrap the fishing line for the trimmer.

The amount of fishing line should be so that the protective casing of the coil closes and the fishing line for the trimmer on the coil is slightly unwound.

The second end of the fishing line is seated in the hole on the protective casing.

Next, take the coil and the protective cover of the coil. We sit the end of the fishing line from the coil into a metal hole on the protective cover of the coil. Put a little fishing line for a trimmer.

We put it all on a trimmer for grass. Turn the coil clockwise to click.

Fastened. Now we connect a trimmer for the grass to the network. Put a trimmer for grass in the original position for work. We turn on a trimmer for grass. Excess fish length will be cut off on the trim blade.

Place for storing a spare coil

Such a fishing line for a trimmer is installed in a coil is very simple. according to the internal scheme inside the coil. The center of the fishing line with a metal mount is inserted in the upper part of the coil, and draw the ends of the fishing line along the grooves and remove.

Fishing line refueling in a trimmer coil for grass

Step-by-step instruction of the Autocut 25-2 Stihl braid head

Open the mowing head by pressing the side of the recesses in it. Click inward first one side so that the constipation comes out of the hook, and then press the other. After that, remove the lid of the mowing head.

It is worth suffering a little.And the power of Hercules will not help you.Only with time you understand how to quickly disassemble it.If you have a Chinese head.It will be disassembled a little easier (plastic is thin).They are also found with the inscriptions “Push and Twist” in the translation “Press and turn”

After you remove the top cover, you need to get the cord holder, while be careful and do not lose the spring

Take two strings (about 2 meters). Insert the end of one string into one of the coil ears and wrap the string in the indicated direction. Make sure that the string is evenly distributed and tightly wound. Season the end of the string in one of the coil holes.

If the Chinese head.Measure the right amount of fishing line (4-5 meters) and fold it in half.Throw a folded fishing line for a trimmer in the middle on the holder (it has a special slot) and begin to wind the cord so that every mustache lies in its own compartment of the holder.

Insert the coil into the mowing head. Pull the ends of the string from the coil holes and season them into a special groove of the mowing head

And here you perfectly understand that buying a fishing line with a diameter of 3 mm was your mistake. As a rule, the recommended diameter of the stihl 2 coils.4 mm

But if you have a Chinese head. Then this rule does not concern you. Some buyers said that 4 mm managed to put to put. True, the coil is quickly crashed.

Remove the mustache over the eyes and set the top cover of the head, combining the side latches.

P.SNA courses for sellers of STIHL techniques told us that in order to increase efficiency it is necessary to throw a coil with a fishing line for 20 minutes into water. I have not tried it myself, but I think these guys will not deceive.

Bryansk region. G. Unuchee st. Volodarsky d. 2.

The process of winding the fishing line on the reel

  • After all the preparatory actions, we need to correctly decide how exactly a fishing line for a trimmer, by turning the cover or in the opposite direction will be washed on your device.
  • We measure approximately 7 mm cutting material and at one end we insert it into the opening hole. It is worth noting that the fishing line for the trimmer is wound precisely on the model of mowers from two side. The direction of winding of the fishing line in such models is indicated on the bastard itself.
  • The fishing line for the trimmer is excreted to about 17 cm freely so that weeds can be cut off with the ends. Add that you should not wrap a fishing line for a trimmer for a huge length coil. About 5 mm leave the distance from the fishing line to the edge.
  • The two ends of the fishing line are inserted into the holes. Both of these ends should be reliably fixed on the device case.
  • The springs extracted from the coil (if any) insert the same as they were extracted, t.e. in the backlog and the body of the head itself.
  • To determine whether you have inserted a fishing line for a trimmer in a trimmer for grass, you need the element itself (bobbin) itself can easily be inserted into the body of the head of your device. If necessary, remove the free ends of the fishing line to the outside. To achieve this, you need to pull a fishing line for a trimmer through the holes in the bobbin with a sharp movement.

So, let’s say, you figured out how quickly, and most importantly, to correct the fishing line for the trimmer to the trimmer coil for the STIHL grass. All that you have left is to insert everything into the grooves and fix the main cover on the device. Then you can press the bobbin itself and make movements counterclockwise until you feel the emphasis. If you do not feel the emphasis, then most likely you were not corrected for a trimmer for a trimmer and you will have to start everything from scratch.

Composition of fishing line and coils for a trimmer for grass

The last criterion to pay attention to. The composition of the equipment for a trimmer for grass

Motokos coils are made of plastic.

But the fishing line for the trimmer can be made of a wide variety of materials. How to wind a fishing line for a trimmer for a trimmer for use for use price in grass using fishing line. Among them it is worth noting nylon. How to replace a fishing line for a trimmer with a trimmer for the STIHL FS 55 grass in the lubrication of a trimmer bearing for the STIHL FS 38 grass. The fishing line for a trimmer made of this material has high wear resistance, is able to withstand large temperature changes and increased loads. In addition, with prolonged storage, nylon does not relax and does not lose its operational qualities. All this directly affects the term of the fishing line.

I continue to experiment with a fishing line for a trimmer for grass. Today on tests: 1. Wire for knitting reinforcement in one layer 2. Wire for knitting reinforcement in two layers 3. Soft hacksaw clips 4. The solution is found. Does not bend, does not break. works. Look, subscribe. But don’t try to repeat it at home. This video, first of all, urges to think.

In general, in my video, I talk about construction in “One helmet”. I do everything myself. One head and 2 hands. The main directions are construction and repair with your own hands, but I also talk about the garden and garden, crafts and useful things for the house.

Interesting #13 House from SIP and heaving soils: https: // www.YouTube.COM/Watch?v = oe40fiijce0 #89 Winter water supply in the bath: https: // wwww.YouTube.COM/Watch?V = xEFDWRIA2O #88 WEAR CONTOR FROM SIP. Experiment: https: // www.YouTube.COM/Watch?v = u70zgwidamo #85 mice in the house from SIP: https: // www.YouTube.COM/Watch?v = m_3bsnhv0xc #84 Ventilation in a private house: https: // wwww.YouTube.COM/Watch?v = tnddwz9uqf8 #63 leaks of heated towel rails. Which heated towel rail to choose?: https: // www.YouTube.COM/Watch?V = O8YLQXKONLQ

At the moment, I am actively engaged in the decoration and arrangement of my house from SIP panels, which is located in the region.

I record all the stages of construction on the video, sharing my experience and my thoughts. Almost all work I do the first time.

I do everything for my pleasure, which I wish you!

Many users of mowers, both electric and gasoline engines, some time after using the purchased fishing line are asked: and how to replace it? If you exclude dangerous options (chain from a chainsaw, canvas from a hacksaw, wire, cable, string, etc.D.), which can cause severe injuries to the user and others, then a home.made fishing line for a trimmer from a plastic bottle is considered the best way out of the situation.

Automatic winding of the fishing line on the reel

There is a type of coils, in which the automatic mechanism performs winding without the help of others. it is quite only to correctly season the fishing line for the trimmer from the user. The fishing line for the trimmer is passed through the hole on the inside of the case, its antennae without winding are tied through the hole on the outer case, the bobbin is assembled, and when rotating the winding button for the trimmer, the snitches are wound without the help of others. It is unrealistic to make the winding erroneous in such a spool: the mechanism itself will determine the correct direction, since it can only spin in one direction.

Two working antennae

In this type of squelpies, you should find the number of grooves for winding the fishing line lying on the inside of the coil:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.capanal coils, the fishing line for a trimmer extends into the through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. the arrow of the arrow is exaggeratedly indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded into them or hold the fingers of the free hand, spread into the through hole of the outer half of the bobin, the spool is locked and attached to the bar of the trimmer product.

The difference in the winding of the fishing line in the two-drummer coils is that the line of the fishing line 2-5 m long is in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this procedure may seem to be long and quite laborious, but over time and experience, this problem will be solved significantly more freaky and easier.

The above will clearly show how to tuck a fishing line for a trimmer to the coil of a trimmer for the grass and correctly wrap it. this operation is nothing complicated and, with some patience, will certainly be crowned with a furorur:

Preliminary preparation

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:

  • Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
  • Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
  • Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

Two working antennae

In this type of squelpies, you should find the number of grooves for winding the fishing line lying on the inside of the coil:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded into them or hold the fingers of the free hand, spread into the through hole of the outer half of the bobin, the spool is locked and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this procedure may seem to be long and quite laborious, but over time and experience, this problem will be solved significantly more freaky and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

How to change a disk on a gasoline trimmer

Set a new one or replace the nozzle on a motorcycle will not be inconvenience. A pin is always in the kit with the tool, which need to block the gearbox hole. We need it, so that the blade does not spin and we could unscrew the mounts under our nozzle. The main thing is to adhere to safety precautions. It is forbidden to change the nozzles on the tool on!

How to put a disk instead of fishing line or a new blade on a trimmer for grass:

  • Remove the plastic casing.
  • Block the pin hole in the pin. It is necessary to simultaneously hook the gearbox and a cup of the shaft. If everything worked out, we move on.
  • Unscrew the rogue through the mounting nut (clockwise). If the trimmer for grass is used for the first time, then the antipsychot is unscrewed along with the structure. He is there.
  • Install the knife so that its hole coincides with the center.
  • We fasten the boot back.
  • Without removing the pinstore, we tighten the nut (in the opposite direction).
  • Tighten the nut by any key. The stronger the better.
  • Put a protective casing.

To change the disk for a trimmer’s fishing line on a gas station, a similar procedure is carried out. Only instead of a nut you unscrew the spool. And at the last stages you return the nut and the boot.

Now you know how to put a knife on a trimmer for grass instead of a fishing line, or install a completely new nozzle. Share in the Комментарии и мнения владельцев what knives you use and how effective they are in the fight against weeds. See you in the following articles!

How to refuel a fishing line for a trimmer trimmer for grass

The technique of winding the thread on the coil depends on the model of the gasoline.thorough. In devices with fishing line and in the sample with the possibility of changing the cutting element, the algorithm of actions is different. We will analyze each option separately. The diameter of the fishing line is indicated on the side of the coil or in the passport of the tool. For winding, choose a fishing line for a trimmer specified by the manufacturer.

Lines for a trimmer with a diameter of 2 mm is considered a universal. It is used to cut grass of any stiffness. The thicker the working thread, the more solid vegetation it cuts off. But, if you insert a too thick fishing line for a trimmer into the coil, the engine will begin to overheat, as the resistance to rotation of the shaft will increase.

Why you need to put a knife on a trimmer for grass

A trimmer for grass with a knife installed on it is most conveniently used for a more comfortable mowing of high and loaded grass in the country. a fishing line for a trimmer on a motorcycle in such cases does not cope. Thin torn very quickly. Using Tolstoy 2.3 mm cord or homemade rods with cables forces the vegetation to wind up on the rogue. This increases the load on the engine. As a result, the piston group and other mobile units of the unit wear out very quickly.

If the mowing of a weeds is produced by an electric trimmer without a knife, only with a fishing line, even a thick with a figure section, the problem cannot be solved. There is always a risk of overheating the electric motor and disable flexible shaft. And it’s all in a large torque of the electric motor. The grass wound on a spindle creates strong resistance to the shaft resembling a speedometer cable that does not withstand and twist.

In order to protect the equipment from premature wear, manufacturers have provided the ability to install special knives on the grass for grass for grass. The design and shape of existing cutting elements allows you to easily cope not only with coarse and outgrown with grass, but also to successfully fight the young shrub.

How to remove the head from a trimmer for STIHL grass

One of the common devices designed for haircuts of grass is a trimmer for grass. It is very easy to work and maintained. That is why it became popular among the population. Its significant advantage is small weight. Even a child can cope with such equipment.

What it is?

A trimmer for grass consists of a cutting element, a bar, an engine and a handle with a control mechanism. It is designed to cut grass in garden areas, as well as to create the perfect lawn. Due to its compactness, the device performs the necessary work in those places where the lawn mower cannot get. In addition to grass, a trimmer for grass is designed to mow branches of trees and shrubs, as well as creating flower beds. Such equipment is not always used for the lawn, since the length of the grass will have different heights.

Specifications

The main technical characteristics of the trimmer for grass are:

  • power;
  • Equipment weight;
  • type of power (from the network or using the battery);
  • engine location (above or below);
  • type of cutting element;
  • Type of bar.

All this needs to be taken into account, buy a particular device.

How to choose the right?

Before buying this equipment, you need to understand for what purposes it will be used. How to replace the head of a trimmer repair for STIHL grass up to 20% of the income of poor debtors from. For a large section with a flat lawn, it is better to purchase a light model with slight power. If you need to improve the summer cottage, then you need to choose the model more powerful.

Cutting tool

So that the haircut process takes place easily, it is necessary to choose the right cutting element.

Its role often acts as an ordinary trimmer fishing line for a trimmer or knife. When choosing one of the species, it is worth evaluating the type of vegetation. The most wear.long element in the design of a trimmer for grass with shrubs. Like a head and. In accordance with these data, a cord is selected, a knife of a certain form. Rotor lawnies how to remove the coil from a trimmer for the grass Makita UM3830. 26.06.2013. An important element is the head for a trimmer for grass. We will consider its varieties below.

Mowing head for a trimmer for grass

It is a special assembled coil, inside which the cord is located. Its dimensions can be diverse. On the inside of the spool should be wrap a cord 15 meters long. Its ends are pulled out to a certain distance to perform work. When meeting with a solid subject, it is destroyed. A mowing head for a trimmer for grass can have a different design. It all depends on the type of device. They differ not only by the design, but also. Watch how to replace the head on a motorcycle chamber repair for STIHL grass with STIH. There is also a universal head for a trimmer for a universal grass, which is suitable for different equipment. This became possible due to special adapters.

The head for a trimmer for grass is classified according to the method of feeding fishing line:

  • Manual. In this case, the name speaks for itself, that is, the supply of fishing line is mechanically. To make the cord even longer, it is necessary to stop the work of the trimmer for the grass and manually stretch the ends.
  • Semi.automatic. How to remove the head from a trimmer for grass and that the thread cut on the when on the coil. How to replace, remove how to replace the head of a trimmer for grass with a repair of a trimmer for STIHL grass. If you want to replace the cord, you need the head for a trimmer for grass touches the ground. In this case, a special button is pressed and the anchor mechanism is opened. Next, the cord lengthening due to centrifugal. The main feature is that the procedure occurs when the trimmer is included.
  • Automatic. To extend the cord, reduce engine speed. Further, with an increase in them, the fishing line for the trimmer is automatically supplied.

STIHL FS 55. Change of coil of motorcycles to a knife

How to install a 2-blade knife on the motorcycle tank STIHL FS 55. Video Instruction how to change the braids of benz.

Repair trimmer for STIHL grass with STIHL FS 38

During the operation of the stihl, the cutting head sometimes breaks, it happens that a cable is torn.Repair.

From all of the above, it follows that a hand.headed braid for a trimmer for grass is uncomfortable. That is why you should choose an automatic type. However, such a head for a trimmer for grass is not popular with users, since during work a large number of fishing line is consumed. Therefore, the optimal type is semi.automatic.

Classification according to the method of refueling

The head for a trimmer for grass can have several ways to refuel the fishing line:

  • Quickly charged. The new cord is wound without analysis of the coil, that is, you do not need to remove it from the device. The end of the new element is touched into the coil and then wound a certain number of times. Upon reaching a specific value, the cord is cut off. The head with a fishing line for a trimmer for grass of this type is produced by Shindaiwa and Speed-Freed.
  • Collapsible. Here the name itself speaks for itself. To replace the new cord, it is necessary to remove the coil from the equipment, then unwind the old fishing line for the trimmer and wind up the new.

Design features

It should be noted that the cutting head for a trimmer for grass contains special arrows. They allow you to perform rotational coil movements in different directions. If there is a need to wind the fishing line for the trimmer towards rotation of the shaft, it turns into a specific position. How to remove a coil from a trimmer for grass, disassemble the braid head. Before as. How to replace, remove the mowing head of an electric trimmer for Black grass how to disassemble a coil. A large number of wound cord threaten equipment breakdown. Two arrows are contained only on imported models. Now the heads are presented on the market with one arrow.

If the cord is not wound after the semi.automatic head, then its previous winding is incorrect. That is, after the head for a trimmer for the grass was installed, the user did not pull the ends of the fishing line from the grooves. Another unpleasant moment in the beard of grass may be sintering the coil turns. Why is it happening? This happens when there is a cord with a solid subject. At the same time, it brakes sharply and, with the subsequent movement, the fishing line for the trimmer begins to go inside the device. Thus, it gets on the rogue and sticks together. Because of this, the employee has to take a break and correct the situation. However, this can be avoided. Before installing the coil, it is necessary to treat the fishing line for the trimmer with a special silicone substance.

How to remove a mowing head from a trimmer for STIHL grass

Warranty production of the factory refueling of a trimmer for the grass will be in demand for fishing line substitutions. Having a very approximate idea of ​​how to tuck a fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the new ones without hunting take up this matter. How to wrap a fishing line for a trimmer to a trimmer coil for the grass, how to season a fishing line for a trimmer to a trimmer coil for grass. Autocut for a trimmer for STIHL FS 55 grass refueling the fishing line in a trimmer coil for grass 2 part winding of the fishing line on. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this process.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Coil with one working osik

The most ordinary option and a light sequence of actions:

  • The dimensions of the bobbin and the length of the unique factory winding determine the length of the fishing line recommended for winding. 2 5 m.
  • One end of the fishing line is inserted into the squeezer.located squeling fixing technological hole.
  • The fishing line for the trimmer is wound on the drum in reviting the spilles on the trimmer product direction. usually, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
  • The small section of the fishing line is left free to withdraw it out. it is fixed in the special side on the inside of the bobbin created to keep the winding when assembling a spool in working condition.
  • The left end of the fishing line is passed through the hole of the outer part of the bobin.
  • Half of the bobbin are collected and put on the bar of the trimmer device.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding.In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves.Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

change, nozzle, trimmer, stihl, refuel, fishing

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

Two working antennae

In this type of squelpies, you should find the number of grooves for winding the fishing line lying on the inside of the coil:

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves.Both strains of the fishing line are wound each on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this procedure may seem to be long and quite laborious, but over time and experience, this problem will be solved significantly more freaky and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

Automatic winding of the fishing line on the reel

There is a type of coils, in which the automatic mechanism performs winding without the help of others. it is quite only to correctly season the fishing line for the trimmer from the user. How to refuel a fishing line for a trimmer to a trimmer coil for grass? Video instruction. How to remove a coil from a trimmer for grass? How to wind a fishing line for a trimmer in in order to refuel a fishing line for a trimmer. The fishing line for the trimmer is passed through the hole on the inside of the case, its antennae without winding are tied through the hole on the outer case, the bobbin is assembled, and when rotating the winding button for the trimmer, the snitches are wound without the help of others. It is unrealistic to make the winding erroneous in such a spool: the mechanism itself will determine the correct direction, since it can only spin in one direction.

Warranty production of the factory refueling of a trimmer for grass will inevitably require replacement of fishing line. Having a very approximate idea of ​​how to fill the fishing line for a trimmer to the coil of the trimmer for the grass on their own, beginners are reluctant to take this matter. However, with some skills, the development of this simple science does not represent any difficulties, and the presented instruction below will facilitate this process as much as possible.

How to wind a fishing line for a trimmer to a trimmer coil for grass

Trimmer for grass is an excellent solution for those who have a large garden or lawn near the house, which must be constantly trimmed. But like any other tool, sometimes it requires intervention. After some time, there will be a need to replace certain elements, and this will have to learn.

How to do it? To replace the main cutting element, first you must choose the right it. In principle, in the operating manual for motorcycles, the diameter of the thread should be used in it.

When you purchased the necessary cutting element, try installing it correctly. It should be noted that on the Internet there is a huge number of videos that will help you figure out how to correct the fishing line for the trimmer to the coil of the trimmer for the grass.

How to change a fishing line for a trimmer on a trimmer

Below we have brought step.by.step instructions for replacing a thread of a trimmer for grass.

The first thing to do is disconnect the tool from the network and turn off the engine. Then it is necessary to remove the head of the trimmer for the grass. This can be done using a simple screwdriver lowering it into the gearbox hole to exclude the turn of the shaft. And then just unscrew

How to install a metal knife on a trimmer for STIHL grass

If the trimmer disk for grass is used regularly, it must be extracted and sharpened or replaced from time to time. This part can be made of metal or plastic, have a different amount of blades, but the replacement process remains the same. over, this procedure is similar to the technology of different manufacturers, whether Carver or Huter, but small differences are possible. Replacing a trimmer knife for grass is quite simple if you follow the safety instructions and know the correct procedure that can be found in the user guide. This material will describe in detail the entire replacement process, as well as knife sharpening methods.

When the use of knives is relevant

When using braids on the outskirts, the most popular device is a fishing line for a trimmer of hair growth. Has a low price, suitable for various three.dimensional heads, is safe to use. The disadvantage of using a braid fishing fishing line is that it is suitable only for mowing with low growth. In other situations, the string is immediately clogged, regardless of the used model of a gasoline or electric trimmer for grass. In addition, the plant is wound on a spindle, which creates significant stability on the shaft and leads to its destruction. It can also lead to the failure of the piston system in bush cutters or engine burning in electric trimmers.

Therefore, for mowing high or solid vegetation, different nozzles are used. So, in order to collect tall and rough grass, thin shoots of trees and shrubs, it is better to install and use the disk. This nozzle is much less common, which contributes to the wear resistance of the equipment.

The note! Since the engine of electric trimmers and battery models is less powerful than gas braids, the use of discs is more relevant for gas mowers.

Features of disks for motorcycle

Knife discs are available in plastic and metal, as well as in various forms for various tasks.

  • Two-, three- and four-lobed knives with pronounced blades are used to mow grass and overgrown trees. However, they are not suitable for harvesting hay, because they grind the shoots, grinding them several times.
  • Massive four.legged wheels are designed not only for cleaning the soil from grass, but also for mowing hay. They prevent cutting several shoots, which makes them suitable for winter cleaning.
  • Cutting blades around the perimeter is relevant for mowed reeds and reeds. Such knives are very heavy. This is the necessary quality to cut thick stems.
  • Professional disk dental disks for shrubs and mowers can be trimmed with small trees and shrubs.

As an alternative, metal discs use plastic knives. They should not be firmly fixed in the head, but they rotate under the influence of centrifugal force. The durability of plastic knives is high, so the service life is quite long.

The note! The advantage of plastic disks is that when they face an insurmountable obstacle, they bounce, and there is no re.contact.

The procedure for installing a disk on a trimmer for grass

Installing a knife for a trimmer for grass is very simple. To do this, use a complete key, disconnecting cutting equipment and a stopped pin procedure yes.

  • First of all, you should turn off the electric trimmer for grass from the network, gasoline. Just a muffler. Remove and remove the protective cover on one side.
  • Then it is necessary to connect the holes in the gearbox and shaft to insert the pin and block the drive.
  • If a hair coil was used, it should be rotated clockwise.
  • Then you need to find a nut to tighten the knife.
  • The next step is the installation of knives. Trammers for grass are often asked about which direction to put the disk. This should be done so that the numbers and letters are at the top.
  • Then you need to put on a cover on top, and above it. fastener, which must be tightly tightened with a wrench.
  • Last step. Install the protective cover.

As you can see, the procedure is very simple and the same for many brands, whether it is Stihl or Husqvarna equipment.

The note! If the owner of the device wants to replace the disk back with a cable, you can install the coil in the same way.

Disk selection criteria

You need to choose a plastic or metal knife, taking into account the processed area and type of trimmer for grass. electric or gasoline. The number of blades will depend on which growth to remove using the tool. You can choose the desired disk shape, the number of blades and manufacturing material using the instructions for the operation of the device. Usually it determines which mills are recommended to use to solve certain problems.

material

It is not recommended to attach metal blades to electric braids, since the design features make them dangerous for the user, this is associated with a curved shape of the rod, the absence of locks on the handles and a high rotation speed.

Important! The straight arrow provides the safe use of a trimmer for grass in moments when the disk rotates against the obstacle. In this situation, he bounces back to a person, so a curved design can lead to injury.

On flexible bar trimmers, plastic knives should be used for security reasons. Their goal is to mow soft grass, dry. While metal discs are great for tall, dense, hard shoots, shrubs and shoots of trees.

blades

The number of blades is important when solving various problems. Thus, two or three pieces are enough to grind grass. For mowing, it is necessary that there are four to eight blades on the disk. To destroy small shoots of trees and shrubs, instead of disks there should be a large number of small teeth.

Sharpening of the disk

Regardless of the quality of the disk, over time it becomes dull and begins to mow poorly. If the blades are still relatively new and not practical, you can sharpen them with your own hands.

Replacement of the disc on the trimmer

The replacement of the disk on the trimmer will need to be carried out regularly with frequent use of a gas station. Even good knives dull over time, you need to hide them or install new. In practice, plastic and metal discs are used that have a different number of blades, sharpened in different ways. The procedure for replacing it does not depend on this. In the process, an important point is the observance of safety precautions. If the material of the cutting part of the tool allows, then you can independently sharpen, which will save money.

When should be used a disk, not a fishing line for a trimmer

For owners of summer cottages, land, amateurs of lawns, trimmer for grass is an assistant who accelerates routine work. When operating the tool, a number of issues arise related to which it is preferable to use nozzles, how to replace them on your own.

When working with a benzocosa, a fishing line for a trimmer is often used, which is cheaper than discs. In addition to the price, she also has the following practical advantages:

The disadvantage of the fishing line is that it is suitable only for mowing low grass, because otherwise it often clogs. This is characteristic of both electric and gasoline cos. When the grass is wound on a spindle, a lot of resistance occurs on the shaft, and it is damaged. At the same time, the piston system (in benzos) may also fail or overheat and burn the electric motor (in electric braids).

In some cases, knives are more effective. They are used for mowing:

  • high and coarse grass;
  • weeds;
  • shoots of trees;
  • home (for example, raspberries, currants) and wild (rose hips) shrubs.
change, nozzle, trimmer, stihl, refuel, fishing

Thanks to the use of knives, the tool wears more slowly: this is due to the fact that it is less often clogged.

Cutting nozzles of this type are in another way, they are also called discs or mills, the essence of this does not change.

Which knife is better

Modern manufacturers are offered to the consumer a wide selection of disks varieties. The cutting parts are classified according to the following criteria:

Material

The material for the knives is plastic or metal, which determines their purpose. The question naturally arises of which disk is better to use: plastic or metal? The choice is determined by the following factors:

Small Engine Repair. Stihl FS 38 Carburetor Service. Servis Rasplinjača. Sustav Dovoda Goriva

Three.lobed plastic knife for an electric trimmer for grass

From the point of view of safety, steel mills are not recommended to put them on electric braids almost always equipped with plastic blades. Features of the design of the power tool itself, its technical characteristics make the installation of metal cutting parts dangerous:

According to the rules of safe operation, plastic knives are used only on braids with a flexible bar. Plastic blades are designed for mowing soft plants (for example, burdock, nettles), dryness. A metal disk-fluz is used for mowing thick, high, coarse grass, shrubs and shoots of various trees, because its cutting properties and wear resistance are higher than that of plastic analogues.

Freak for a trimmer for grass with carbide attacks 40 teeth

The device, as well as the technical characteristics of the benzos, determine the use of metal nozzles when working with them:

  • the presence of a straight rod increases the distance to the legs of the mowing;
  • comfortable handles with limiters;
  • The possibility of a smooth speed set.

Gasoline units equipped with metal disks are well suited if it is necessary to pump out significant areas with different grass or shrubs.

The number of blades

The form of disk blades practically does not affect the quality and speed of work, their number matters. For hay harvesting, it is recommended to use mills with a large number of blades, for example, with 8 or 4 main and 4 additional. If there are few of them (2, 3), then such knives grind the grass very hard. Mills with a large number of small teeth are used to mow young shoots of trees and shrubs.

Patriot PT453 lawn mower with a metal drive for mowing shrubs

Metal knives for lawn mowers are sharpened in different ways: one-sided and on both sides. Dumb or with poor sharpening cutting cuts of milling cuts reduce labor productivity, and also worsen the quality of work. In this case, the load on the tool and fuel consumption increases.

The collision of knives with stones is dangerous, as a result of which the tool bounces, which can apply the mowing of injury.

Select a cutting element for a trimmer for grass according to the material, size, structure should be based on the type of tool and the power of its engine, the volume of upcoming works and the type of plants that have to be mowed. Partially, the instructions from the manufacturer to the model used will help in this, the recommended milling parameters are spelled out.

A knife installation algorithm for a trimmer for grass

Replacing the knife on the trimmer is quite simple. In the kit with it, manufacturers include the key to remove the cutting nozzle (spray with a fishing line) and a pin designed to block the gearbox. To change the disk, you need to perform the following actions:

What is a trimmer for grass

Under the trimmer suggest motorcycles or electrocos. This is practically one of the variety of lawn mowers (manual mower) that are created for mowing the grass. This is a modern braid braid. At first, they were developed to carry out agricultural work, but the main use of trimmers was specifically the mowing of lawns. For the first time, the thought to make a trimmer for the grass occurred to the South American businessman J. Bollas. Passing by car through an automatic car wash, he saw that the principle of spinning brushes can be used for beveling agricultural crops.

After that, he collected a simple trimmer for grass from a tin can (as a coil) and a fishing line, reached into the holes drilled in it. He installed the resulting design on a pole, on which a moped engine was previously mounted for earlier. The device is a mowing not only wheat, and grass. The device of the coil of the trimmer for the grass and it leaves the coil. a fishing line for a trimmer does not why stalls. Realizing that on the sale of braids for the grass he will earn huge funds, the businessman improved his product and gave him the title of “Excellent weeds”. A feature of the invention was the possibility of a bevel of grass around the trees. the forest perfectly cut off the grass, but did not injure the bark.

The main purpose of such a tool was the bevel of grass in small areas in places where traditional wheeled technique cannot be applied:

  • in the presence of a huge number of shrubs;
  • in gardens with a huge number of trees;
  • near fences and fences;
  • If the site has an uneven relief.

All trimmers for grass have a bar in their own composition. the main constructive element. A gasoline or electronic engine is attached to the rod from the 1st end, and a coil with a fishing line is put on the other-the main working element. With all this, the type of transmission can be at least any. it is limited only by the ability of the manufacturer and commercial parameters.

Elimination of the malfunctions of the carburetor

The problems of the carburetor, as a rule, consist in clogging nozzles and other elements. For repair, you need to disassemble the knot and clean it. Perhaps an additional adjustment of the carburetor will be required.

You can clean nozzles and fuel channels using a pump or compressor. For adjustment, 3 screws are usually used:

We recommend reading:

Trimmer for the grass gasoline: choosing advice, overview of the best models, types and options for using trimmers (120 photos)

So You Own A Stihl FS 38 String Trimmer

  • Completely tighten the screws h and l.
  • Unscrew the screws h and l by 1 turnover, accuracy plays a significant role.
  • Run the lawn mower and leave in working condition for 10 minutes to warm up the engine.
  • When the engine warms up, unscrew the gas to the full.
  • Let go of the gas handle and configure idle (LA). Twist the screw after the rotation of the working body so that it stops.

Preparation of a trimmer coil for grass for winding

Initially, as a rule, the coil is installed to the head of the device itself. The coil consists of two parts. this is a lid and a spring.

You can buy the highest quality electric ships, trimmers for grass and additional components here in the online store “Garden mechanisms” for the lowest for the selected goods from the category. The directory of the link presents the most popular, demanded electric mowers from world brands such as Bosch, Makita, Patriot, Gardena, Hyundai and others.

  • Whatever company you have a trimmer for the grass for preparation are the same for all types. Disassemble the device, or rather, remove the coil from the head of the trimmer for the grass. To do this, we click on the fixers located on the sides of the head of the head, and turn the head clockwise.
  • In order to open the mowing head without problems, click on the side latches, if you do not succeed with your hands, use a flat screwdriver to help you. We take out the coil from the head.
  • In order to correctly choose a fishing line for a trimmer for your equipment, digital designations must be applied on the inside of the coil, which indicate the thickness and type of permissible fishing line. All designations are indicated, as a rule, in millimeters.
  • If you have not found any numbers, then the maximum permissible diameter of the fishing line can be determined by a through hole for lingering the fishing line. The fishing line for the trimmer should go forward and backwardly.

The process of winding the fishing line on the reel

After all the preparatory actions, we need to correctly decide how exactly a fishing line for a trimmer, by turning the cover or in the opposite direction will be washed on your device.

So, let’s say, you figured out how quickly, and most importantly, to correct the fishing line for the trimmer to the trimmer coil for the STIHL grass. All that you have left is to insert everything into the grooves and fix the main cover on the device. Then you can press the bobbin itself and make movements counterclockwise until you feel the emphasis. If you do not feel the emphasis, then most likely you were not corrected for a trimmer for a trimmer and you will have to start everything from scratch.

change, nozzle, trimmer, stihl, refuel, fishing

A couple of tips

If the fishing line for the trimmer was wound correctly, then when pressing the button button, automatic stretching of the cutting element should occur. A trimmer fishing line for your mowing device is one of the most important elements, without which a trimmer for grass can lose all its functional abilities. We can say that a fishing line for a trimmer (cutting element) is the heart of your mowing. Therefore, when buying a fishing line, primarily devote to its quality. When purchasing a fishing line for a trimmer of a particular company, be sure to compare it with the quality of the old fishing line.

What can be used instead of fishing line

Most mowers are interested in others or sellers in specialized stores about what can still be used (replaced) except for the fishing line. Many of them begin to experiment and use unsafe methods, installing different cutting elements on their trimmer for grass, including copper wire, metal, some manage to use strings from guitars and even cables, and someone is completely a fishing line for fishing networks.

  • If instead of a special cutting element, say fishing line, install a metal cable, then your trimmer for grass can “turn” into a real dangerous weapon not only for you and your eyes, but also for all people around you nearby. This is due to the fact that during the work of the trimmer for the grass, the steel cable will constantly work, which will lead to confusion, and its small pieces can fly to all sides with a huge speed.
  • The same can happen if a copper wire is used instead of a steel cable, but in this case, the pieces of separation from copper wire will be slightly larger and may give you an even greater injury. And if God forbid, accidentally catch such a cutting element by the leg, then after that 100% is guaranteed a deep cut of soft tissues, and in some cases, all this can lead to amputation of small limbs (fingers) of the legs and even hands. Therefore, our advice to you, do not use any other cutting elements, except for fishing line, for your own safety and others.

What else is important to know

Now that you know how to disassemble the coil of the trimmer for the grass and season the fishing line for the trimmer, we will share several more tips for the operation of your benzo- or electric ships.

A worn or damaged head of a trimmer for grass at high speeds may fail and even cause serious injuries. Examine Motokos before and after work in order to evaluate its condition. Constantly check the integrity and serviceability of all components of the mechanism.

Before winding a fishing line for a trimmer to the coil of a trimmer for grass, it is worth putting it for a day or for a whole day in water. The nylon thread is hygroscopic, that is, it absorbs the liquid. This makes a mowing string softer and elastic. Firstly, it will be wound on the drum more tightly. But the main thing is that in the process of working a fishing line for a trimmer will not be the same brittle as if it were dry. This will significantly increase the operating time of one shift set.

Before starting work, be sure to check that cutting strings on both sides are the same length. At the beginning of the mowing, the cutting ends are shortened to the required size to the feet installed on the protective casing.