How To Fix A Hand Circular On A Table

How to make a circular table with your own hands? How to make a circular table with your own hands? When buying a circular saw, the future master does not always imagine the amount of work that he has to perform with this equipment. This one

General requirements for a circular saw table

Tenoning device on a circular table.

A table for a working saw must meet several basic requirements:

• Support rigidity;
• Sustainability;
• Evenness.

In addition to these requirements, there are several prerequisites that must be taken into account when creating a machine for a circular saw.

1. Safety and reliability of the saw attachment.
2. Saw blade guard, which is often left unfulfilled.
3. Free access to the on and off button.

An additional set of functions of devices depends on the requirements of the master himself and his qualifications. This set includes accessories that:

• Help to perform an even longitudinal cut;
• The same quality cross-cut.

Circular saw design.

The standard table, which can be purchased with the circular saw, is usually made of stainless steel. The sawing device itself is mounted upside down, an incision or slot is made approximately in the middle to accommodate the saw blade itself. Its width must match the width of the saw blades used. This gap should not be allowed to be too wide. In this case, shavings and other work debris will often clog the device, rendering it unusable.

As for the technical parameters of the saw, which will be used for machine sawing, its motor power can be more than that of a conventional hand saw. But still, do not exceed 1200 W, experts consider such a risk unjustified. After all, the more powerful the saw, the more durable and reliable the table is needed.

Industrial machines are made, as already mentioned, exclusively of metal, but their support is very often poured with cement to secure the device more securely.

Table lid: how much useful it can be

Circular saw application diagram.

For the saw itself, depending on the selected thickness of the tabletop, a saw cut is made with a depth of about 1 cm. The saw cut is made to fix the working table of the device itself around the perimeter. In order to do it, using a ruler, a simple pencil and the handsaw itself, mark the place where the device will be located.

There are several options for attaching the saw to the table. It all depends on what the goal is. If a person wants the saw to be freely dismantled if necessary, the mount should allow this, but at the same time be reliable.

To do this, around the marked perimeter of the saw’s working surface, limit bars with grooves are installed without forming a closed frame. This fixes the hand saw. But such a setting is applicable for small volumes of work and low speeds of the disk revolutions.

A more reliable fastening looks similar, but with this fastening, the bars are smaller: they are not 4, but 6 or 8, each fixed near a specific section of the bed, and if necessary, the master will have to unscrew the bolts near each such bar. Some attach the circular without wooden beams, screwing it directly to the table, making holes in the bed.

Turning the table top over, you can see the slot with the saw blade sticking out of it. The installation uses the locking function of the disk platform.

You can make a slot on the sawing table for a removable riving knife, which with a clamp will be attached next to the saw from the bottom side.

How to make cross cuts?

Miter box for circular saw.

To make cross cuts, a plank is most often used, which looks like a small table. It is inverted, has 2 parallel bases and a slot through which the saw blade can pass. If all angles have been met, the cut will be strictly perpendicular.

The solution for the cross direction of sawing can be another interesting option. Bars are attached to plywood (slightly larger than the table) from the bottom side. They should be clearly spaced across the width of the table. From the top of the board are attached 2 parallel plates, which are higher than the saw blade and have slots for its passage. The result is the same, but the solution is easier to implement.

In addition, the table top can be fitted with rulers on both guides.

Guides for longitudinal and cross cuts

The table must have guides, for their manufacture they use aluminum construction U-shaped slats. With an open edge, they cling to the table. Subsequently, auxiliary fastening parts will move along them, allowing more accurate cuts.

The rail along the saw should be built in first. The parallel rail will run at the edges of the table, perpendicular to the saw itself. The guides themselves are also made of plywood.

How to make a circular table with your own hands?

When buying a circular saw, the future master does not always imagine the amount of work that he has to perform with this equipment. This is one side of the problem. On the other hand, the foreman understands that it is better for him to purchase a circular machine right away, but it is very difficult to find a comfortable table that would meet all the requirements.

The circular table allows you to make a more accurate and even cut.

Thus, the idea is born to make a table for a hand-held circular saw with your own hands. In this area, true craftsmen have no limits.

For what work is a chisel necessary.

Read about a do-it-yourself tiller blade here.

DIY circular saw table

How to make a table for circular from chipboard? To make such a table for a circular, you need:

• A sheet of laminated plywood with a thickness of 9–11 mm (800×800 mm);
• 4 sheets of laminated chipboard 16 mm thick (400×784 mm);
• Several bars 40×40 mm;
• Several bolts and screws;
• Aluminum cornice.

Any hand-held circular saw with a large blade can be mounted on such a table. Drawings of this type of circular table can be easily found on the Internet.

Such a saw is made in several stages:

1. A drawer of the future table is made from laminated chipboard sheets. It does not have a bottom, and the walls are fastened with bars, which, in turn, must be secured with bolts and screws.
2. A cover is made of plywood with a hole into which you will need to insert a saw. The marking for the hole is carried out along the support shoe and the lower protective casing of the circular saw. The hole is cut with a jigsaw.
3. The saw is attached to the plywood with ploughshare bolts with a countersunk cone head. The plywood cover is fastened to the laminated chipboard body with an 18 mm steel case.
4. Wiring is laid along the side of the table top and a start button is installed.

Circular saw guides are made from timber or aluminum curtain rod.

Circular table from hand circular saw

DIY circular saw table

A circular saw is used to cut wood along the solid wood. Its cutting base is a disc-shaped plane with a serrated outer edge. Such saws are not only hand-held, but fixed on the table. How to make a universal circular table so that this cutting tool can be installed on it? Below are several ways to make a do-it-yourself circular saw table.

Preparation of tools and materials

Having decided to make a table for a hand-held circular saw yourself, you need to take care of the availability of all the materials necessary for work:

• Film faced plywood (9 or 11 mm), size 800 mm by 800 mm;
• Chipboard 16 mm or other sheet material suitable for the manufacture of the case, sheet size 400 by 784 mm. 4 pieces;
• Bars 40 x 40 mm (length depends on the installation method);
• Self-tapping screws;
• Bolts.

Any hand-held circular saw is suitable for such a table. It should be remembered that when attached to the table, the cutting depth decreases by 10–20 mm. So saws with small discs are not suitable for such a table.

DIY circular saw table

A circular saw is used for cutting wood, plastic. Its cutting base is a flat metal disc with a serrated outer edge. Choosing such a tool, everyone decides for himself what kind he needs: desktop, manual, stationary. Many people prefer the manual option. However, in some situations it is necessary to secure the saw. In this case, you can make a table for a circular saw with your own hands, having the opportunity to fix the tool if necessary.

Step-by-step instructions for assembling a circular saw table

1. Manufacturing of the case. The sheet material for the body is cut to size: 400 mm by 800 mm. Parts are fastened using self-tapping screws and bars. It is better to carry out the assembly by pre-drilling the outer parts of the box. The result is a rectangular box without a bottom and a lid. The top of the blocks is then used to secure the plywood sheet.

2. Prepare and fix the plywood top. Slot holes. First, a piece of 800 mm by 80 mm is cut from a sheet of plywood. Next, measurements are taken of the support shoe of the saw that will be mounted on the tabletop. On the back of the plywood, markings are made. You will need 2 center axes. Without them, you cannot perform accurate markup. Then marks are applied to the plywood, corresponding to the dimensions of the support shoe. Then they make such measurements that the circular has: the diameter of the lower protective casing, its thickness, the maximum distance from the edges of the support shoe. In accordance with the obtained dimensions, they put marks and cut out a rectangular hole with a jigsaw.

3. Fixing the saw to the plywood table top. First, 4 holes are made in the shoe. Diameter. 10 mm. Then the tool is installed so that the working part goes into the cut hole. When the saw is aligned, mark the location of the holes. Marks are made in the central part. In order for the tool to stand securely, plow bolts with a countersunk cone head (M8) will be needed for fastening. To install them, you will have to take care of a high-quality deepening of the cap, it can protrude a maximum of 1 mm in an untightened state.

Plywood is drilled from the outside, the diameter of the holes obtained should be 8 mm, and then a countersink should be made under the head. When the holes are ready, the saw itself is installed on the sawing table for the circular saw, the bolts are tightened from the inside using nuts with plastic grovers or spring washers.

4. Fastening the table top to the body. Start button. First, at a distance of 30 mm, holes are made in the corners of the plywood tabletop. Then a hole is drilled in the central part of the bars. The parts are connected using a steel foot M8 by 18 mm. On the side part, the usual “Start. Start” button is installed. An electrical network is laid inside the body, and the button on the instrument itself is clamped.

5. Manufacturing of a thrust beam. A simple circular saw table will become much more convenient if you equip it with a persistent bar. The drawings contain all the dimensions you need. The beam can be made of plywood and secured with full extension furniture rails. The resulting beam should slide over the surface at a 90 ° angle to the cut plane with little clearance.

6. Stop for rip cuts. It is made from an aluminum curtain rod. At 150 mm from the edges, holes are first drilled for the bolts, and then 2 lines are drawn from the bolt attachment point to the axial mowing line. At the intersection and further towards the bolts, 12 mm holes are made at a distance of 30 mm. Tighten the bolts from below with nuts. And according to the drawn lines, they make cuts for the tonic, their width can be seen in the photo.

Information on how to make a table for a circular saw can be viewed at This will help you quickly and easily improve the equipment of your workshop.