How to Install a Knife on a Hammer Etr1100a Trimmer

Transcript

1 ELECTRIC TRIMMER ETR1100A INSTRUCTIONS FOR USE

2 Dear customer! Thank you for purchasing a Hammerflex brand tool. All Hammerflex products are designed and manufactured to meet the highest quality requirements. For efficient and safe operation, read this manual carefully and keep it for future reference. Attention! This tool is intended for domestic use only. Instruments used for business or professional purposes are not covered by the warranty. Attention! When working with power tools, follow the safety guidelines below to prevent fires, electric shock, and personal injury! Attention! Always keep these instructions with the trimmer. When transferring the trimmer to third parties, attach these instructions to it. Field OF APPLICATION DESCRIPTION OF THE DEVICE (Fig. 1) 1. Motor housing 2. Holder for mains cable 3. Power cable with plug 4. Switch trigger 5. Belt mounting bracket 6. Additional handle mounting sleeve 7. Additional handle 8. Mounting sleeve 9. Wing screw 10. Rod 11. Reducer 12. Knife 13. Protective cover for working with a knife 14. Protective cover for working with a trimmer head 15. Trimmer head 16. Shoulder strap This electric trimmer is designed for mowing grass and small bushes. With it, it’s convenient to take care of small or curly lawns, easily avoid obstacles and gently mow grass. Fig. 1 TECHNICAL CHARACTERISTICS Model Voltage / Frequency Power Rotation speed without load Rod Cutting head Maximum cutting line diameter Maximum cutting line width Maximum cutting width with a knife Weight n / a LwA (sound power level) LpA Aw (vibration level) IP20 ETR1100A 230V

50hz 12000W 7200 rpm Collapsible metal rod Semi-automatic release of fishing line 2mm 380 mm 250mm 5.5 / 6kg 96dB (A) 83dB (A) K = 3dB (A) 3.0 m / s2 K = 1.5m / s2 Attention! Instrument specifications are subject to change without notice. General SAFETY RULES Safety measures must be followed, including the following rules for using electric trimmers to reduce the risk of fire and electric shock. 3

3 Since the warnings and safety rules listed in these instructions do not exhaust all possible cases that arise when working with the trimmer, care must be taken to ensure that the work is done. It should be remembered that the operator of this trimmer is responsible not only for their own safety, but also must ensure the safety of others. 1. Use the trimmer as directed. 2. Do not use this trimmer with children or people who are not familiar with these instructions. 3. Store the trimmer in a dry place, out of the reach of children and unauthorized persons. 4. When working with the trimmer, keep the necessary safe distance from the workplace to those around you. 5. Before connecting the trimmer to the power source, make sure that the mains voltage matches the values ​​indicated on the trimmer label. 6. Before you begin, carefully read the trimmer controls. All controls must always be in perfect condition; To do this, you must perform regular checks. In case of malfunctions, stop using the trimmer and immediately contact a specialized service center for repairs. 7. When working with the trimmer, wear special clothing, shoes, and personal protective equipment (safety glasses, face shield, gloves). Do not wear loose clothing or jewelery, as they may be tightened by moving parts of the trimmer. 8. If you are not using a trimmer or intend to replace fixtures or clean the trimmer, turn off the trimmer and disconnect the power cable from the power source. The connecting plug and socket must always remain dry and clean. Do not touch these parts of the trimmer with wet hands. 9. Use caution when working with the trimmer; Keep clothing and body parts away from moving parts of the trimmer. 10. Protect the power cable from damage. Do not carry the trimmer over the power cable. When disconnecting the trimmer from the power source, hold the cable plug. Do not pull on the cable. Protect the power cable from damage with sharp objects, as well as damage to the cable insulation caused by open flames or heat sources. If the power cable is damaged, immediately disconnect the trimmer from the power source; repairs should be carried out in a specialized service center. 11. Ensure that the power cable does not come into contact with moving parts of the trimmer. If the cable gets on the cutting line of the tool, immediately turn off the trimmer, disconnect it from the power source and check for damage. 12. Always hold the trimmer with both hands. If the trimmer slips out of the operator’s hands during operation, it can be harmful to health, pose a threat to 4 lives or result in property damage. The handle must always remain dry and clean. 13. Do not expose the instrument to excessive moisture, do not immerse the trimmer in a liquid. Do not use the trimmer in atmospheric conditions. 14. Regularly check the condition of the trimmer and its accessories. Optimum performance can only be achieved if the trimmer and accessories are in excellent condition. Always check the covers, the switch, the power cable, the connections (all bolts must be firmly tightened), and the trimmer operation (smooth running, vibration, etc.). If a malfunction is detected, stop operation and contact an authorized service center. 15. Take a safe and stable position when working with the trimmer. 16. To avoid personal injury, make sure that there are no obstacles in the work area. 17. Do not lay the trimmer on the ground until the engine stops and the line (knife) stops turning after the trimmer is turned off. Never try to stop or slow down the rotation of the trimmer head or knife. 18. The trimmer is not intended for use in conditions of increased fire and explosion hazard. The use of the trimmer in the immediate vicinity of flammable and flammable materials and substances is prohibited. 19. It is forbidden to make changes in the design of the trimmer (remove covers, bolts, etc.). All types of repairs should be carried out only in a specialized service center! To repair the trimmer, only spare parts recommended by the manufacturer must be used. The use of other spare parts can lead to malfunction of the trimmer and harm to the operator’s health, life-threatening situations or property damage. 20. Do not overload the trimmer. If the trimmer overheats, stop operation and allow the tool to cool for several minutes. 21. Avoid accidentally starting the trimmer. Before connecting the trimmer to a power source, make sure the trigger is not pulled. 22. Do not start working with a trimmer if you are tired, under the influence of AL-KOgol, drugs, or other substances that reduce the speed of the reaction. 23. Keep all ventilation devices clean and do not insert fingers or objects into the ventilation openings. Do not use water, oil, or other liquids near vents. A constant supply of sufficient air is necessary for normal engine operation. Special SAFETY PRECAUTIONS WHEN WORKING WITH THE TRIMMER When working with the trimmer, the maximum safety precautions should be observed. You must be extremely careful when doing work, because a rotating fishing line or knife can cause serious damage if the trimmer is not handled properly. 5

4 1. To prevent the trimmer from being turned on unintentionally, always disconnect the trimmer from the power source immediately after operation. 2. Do not use the trimmer with damaged covers or controls. Check that the protective cover is installed correctly and always check the installation before starting work. The protective cover not only serves to ensure operator safety, but also ensures optimal operation of the trimmer, protects other parts of the trimmer. The use of a trimmer without a protective cover will invalidate all warranties. 3. Do not place the power cable near the cutting tool. The power cable must always move back from the trimmer. 4. The use of a trimmer for pruning trees and large shrubs is prohibited. This may damage the trimmer. 5. When using the trimmer, make sure that the cutting tool does not come into contact with solid obstacles (stones, curbs, pillars, fences, etc.). This may damage the fishing line, reel or protective covers. 6. Use only manufacturer recommended cutting lines. The use of cutting lines with other parameters is prohibited. 7. It is forbidden to use a metal cutting line instead of a nylon line. 8. Always remove all obstacles from the work area (stones, hoses, ropes, electrical wires, garden decorations, etc.) before starting work. 9. Check that there are no people or animals near the work area. Rocks, earth, and other objects can fly a long distance while the trimmer is in operation. The minimum safe distance is considered to be a distance of 15 meters from a working trimmer. 10. Wear closed shoes and long pants. During the operation of the trimmer, small objects can fly off and cause injury. 11. Always disconnect the power cable from the power source in the following cases: If you are not working with the trimmer If you are moving the trimmer to another platform If you are leaving the trimmer unattended If damage has occurred to the power cable or any other part of the trimmer (especially the protective covers, handle and etc.) Before cleaning the working area of ​​the cutting line or knife. In all operations with a reel or knife. Before turning the trimmer to check the working area of ​​the cutting line (knife), before installing the protective cover, etc. 12. It is forbidden to use a trimmer to chop the cut grass. 13. Always keep the trimmer upright at an angle of about 30 degrees to the ground. Using the trimmer in any other position is prohibited, as it is dangerous. 14. It is forbidden to fix the switch in the “ON” position with the help of additional devices. Check that the parameters of the power supply correspond to the parameters indicated on the manufacturer’s marking. Replacement or repair of the power cable or plugs of the power cable of the trimmer should be done only in a specialized service center. The trimmer is double insulated in accordance with the requirements of the standard EN Grounding is not required. It is recommended to use a power supply network equipped with current protection with a tripping current of 10 A. Double insulation. Your tool has double insulation. This means that all external metal parts are electrically isolated from live parts. This is done by placing additional insulating barriers between the electrical and mechanical parts, making the grounding of the tool unnecessary. Remember: Double insulation is not a substitute for the usual precautions required when using this tool. This insulation system provides additional protection against injuries resulting from possible damage to the electrical insulation inside the tool. Using an extension cable. When using extension cables, always check that their technical parameters correspond to trimmer parameters (rated power). Make sure that the extension cord is in good condition and suitable for use in atmospheric conditions. Do not use extension cords with damage; check the condition of the extension cords before each use. When using extension cords on a reel, make sure that the cable is completely unwound before connecting to the power source. Use a retaining clip to connect the power plug to the extension cord to prevent accidental disconnection. The cross-section of all wires must be at least 1.5 mm 2, the maximum cable length is 40 meters. Graphic symbols on the trimmer body Before working with the trimmer, you must carefully study the instructions. The tool complies with safety standards Double protective insulation When working with a trimmer, it is recommended to use 7

5 soundproof headphones and safety glasses Warning! Do not use the trimmer in atmospheric conditions. Attention! Before performing maintenance, turn off the engine, wait for the fishing line to stop completely, and disconnect the cable from the power source. Wait for the heated parts to cool completely. Follow all the rules listed in the instruction manual. Outsiders must be away from the work area. Attention! The knife for cutting fishing line located on the protective cover for grass is sharpened sharply. Contact with this knife must be avoided. Failure to do so may result in serious injury. Attention! During operation, various objects in the grass can fly off from the trimmer, which can cause injuries to the person who is working or nearby. To work with the trimmer, always wear suitable eye protection, safety shoes, gloves, and long pants made of thick fabric. 2. Installing the auxiliary handle (Fig. 4). Fig. 4 Fig. 4 GUIDELINES FOR ASSEMBLING AND CONFIGURING THE TOOL Attention! The tool must be assembled in accordance with the instructions in this manual to avoid injury to operators. 1. Installing a protective cover. A). Protective cover for working with trimmer head (Fig. 2). Place the guard over the boom above the gearbox. Secure the casing with the retainer and screw. B) Knife guard (Fig. 3). Take the lower part of the rod and screw the protective cover onto the base of the gearbox with 3 screws. Attention! If the line cutter is not mounted with the protective cover, be sure to install it on the protective cover with the screw. Fig. 2 Fig. 3. Disconnect the bracket from the handle using the included hex key. Place the handle on the bar and attach the bracket from the bottom opposite the handle. Securely grip the handle with the bracket. The handle should be located in a position convenient for you. 3. Assembling the rod (Fig. 5), attaching the belt. The trimmer bar consists of the upper part, on which the engine is located directly, and the lower part, where the cutting head with fishing line or knife and protective cover are located. The attached lower part of the rod is attached to the upper part by means of a mounting sleeve. 1. Attach the lower rod to the upper one through a special coupling (the coupling is mounted on the upper part) in a position convenient for you, while the button of the lower rod must be in one of the holes of the coupling. Tighten the coupling screw. Attention! If the button does not fully fit into the locking hole, the shafts are not locked. It is required to slightly rotate the attached shaft until the button is locked in place. 8 9

6 Fig. 5 Attention! After replacing the coil, turn on the trimmer and let it run without load for at least one minute to make sure that the trimmer is functioning properly. 2. Install the belt on the plastic clamp of the upper rod (5, Fig. 1). Adjust to the length convenient for you. 4. Power cable. Use a cable with a length of not more than 40 m and a cross-section of 1.5 mm 2. During operation, loop the cable into a special holder located on the rear cover of the motor housing and hold the extension cord vertically. 5. Installing the reel and refueling fishing line. Attention! Be sure to wait until the trimmer head stops completely. Touching the rotating head of the trimmer may result in personal injury. Unplug the power cord from the outlet. Press on both sides of the clamps located on the bobbin case (Fig. 5). Remove the coil cover. Do not lose the spring. Remove the empty spool from the bobbin case, and clean the spool holder (Fig. 6) Fold a length of 6 meters of fishing line in half. Insert the resulting loop into the groove of the dividing flange. Wind the fishing line onto the reel in the direction of the arrow, making sure that each piece of fishing line is in its compartment. Attention! Both ends of the fishing line are wound in one direction! Avoid overfilling the coil. Place the remnants of the ends of the fishing line with a length of about 15 cm in the opposite grooves of the lower disc of the reel (Fig. 7). Pass the free ends of the fishing line into the holes in the spool body. Insert the spool into the spool case so that the grooves with the fishing line are opposite the holes in the spool case. Press the coil firmly into the housing. In this case, the line should come out of the grooves (Fig. 8). Put on the reel cover (Fig. 9) To the drawing Reel cover 2. Reel 3. Lower reel cover 4. Retaining cap 5. Springs 6. Fishing line 7. Groove of the bottom reel cover 11

7 6. Installing the knife (Fig. 3). Unplug the power cord from the outlet. Attention! Be sure to wait until the trimmer head stops completely. Touching the rotating head of the trimmer may result in personal injury. After installing the protective cover for working with the knife, as described in p Put the inner flange, knife, outer flange on the spindle and tighten the screw. Attention! If increased knife vibration occurs, it means that it is not installed correctly. Switch off the engine immediately, disconnect the cable from the power supply, wait until the knife stops completely and adjust it. Working with an improperly installed knife can result in personal injury. Attention! Be sure to install a protective cover: when working with a trimmer line, a cover for working with a trimmer line, when working with a knife, a cover for working with a knife. Check BEFORE GETTING STARTED Before using the trimmer, make sure that the trimmer is in good operating condition: 1. Make sure the trigger is not pulled; The power cable is disconnected from the power source. 2. Check the general condition of the trimmer, check the tightness of the protective cover, the operation of the switch and the condition of all wires, including extension cables. Make sure that all nuts and bolts are tightened tightly, all parts are installed correctly, all moving parts are in good condition and can move freely. All trimmer parts must be intact and intact. You should check everything that may affect the safe operation of the trimmer. If any malfunctions or damage are found, contact an authorized service center to repair the trimmer. It is forbidden to work with a faulty trimmer. 3. Stand on a flat surface and take a stable position. 4. Check the extent to which the fishing line extends beyond the protective cover. 5. If the fishing line is too short, pull it out and press the head on the reel several times until the fishing line reaches the desired length, for example, to the edge of the protective cover. Repeat to adjust the second end of the line to the desired length, for example, to the outer edge of the guard. Attention! Be careful with the knife attached to the protective cover (this knife cuts the length of the fishing line to the desired size) when adjusting the length of the fishing line. Trimmer OPERATION Turn on / off. 1. Insert the plug of the trimmer cable into the jack of the extension cable that is approved for outdoor use. Connect the cable to the power source To turn on the tool, press the trigger trigger (4, Fig. 1). To turn off the tool, release the switch key. Recommendations FOR USING THE TRIMMER Inspect the area to be mowed and free of stones, broken glass or wire that might bounce off the working trimmer or get tangled in the cutting line. Grass or weeds can only be mowed dry. Always start cutting from a section closer to the power source, and gradually switch to sections that are a greater distance from the power source, while avoiding contact with the cord. Always hold the cutting head parallel to the ground. During grass mowing, turn the trimmer in a semicircular motion from side to side at an angle of approximately 30 ° and slowly move forward. A light haircut in several passes is preferable, because cutting long grass in one go can lead to winding grass onto a reel and blocking the head. In one pass, try to cut cm of grass. Cutting grass is done by the edge of the fishing line. Do not force the cutting head of the trimmer deeper into the area of ​​the mowed grass. The extension mechanism slightly pulls the fishing line with every light hit of the coil on the ground. Constantly tapping the trimmer on the ground while mowing the grass is necessary to maintain the desired line length. If the fishing line is pulled too far, the excess part is cut off with the help of a blade installed in the protective cover. The edge of the cutting line wears out as it is used; this leads to a narrowing of the mowing strip. If you do not extend the line from time to time, it will wear out to the very hole of the reel. When the trimmer stops, the fishing line tends to loosen, as a result of which it can be pulled into the cutting head. In this case, it is necessary to disconnect the trimmer from the power source, remove the coil, re-withdraw the ends of the fishing line through the holes provided for this, and reinstall the coil in place. Avoid collision of the fishing line with foreign objects such as chain hedges or concrete sections, as this leads to premature wear of the fishing line. It is forbidden to drag the cutting head of the trimmer on the ground. Attention! During operation, as well as after completion of work, check and clean the moving mechanisms of wound grass. Operating the uncleaned trimmer may cause it to malfunction, in which case repairing the instrument is not a warranty. Attention! It is strictly forbidden to use a trimmer for sweeping. Sweeping means the removal of foreign objects from paths, sidewalks, etc. The trimmer is a powerful tool that 13

8 able to cast small stones and other small objects at a distance of about 50 meters; this can cause personal injury or damage to property, such as cars, buildings, windows. After completing the haircut, lower the cutting head onto the lawn, release the switch and wait for the motor to stop completely. After that, you can put the trimmer on the ground and disconnect it from the power source. Caution: Upon completion, be sure to disconnect the cable from the power source. Submission of fishing line. The trimmer is equipped with a system of semi-automatic shock extension of fishing line. In order to release a fishing line, you must perform the following steps in sequence: 3. Press the switch key. 4. Lightly hit the stopper cap (Fig. 10) with the ground while the engine is running. Do not hold the locking cap on the ground. 5. The excess ends of the fishing line will be cut off with a knife. Cutter. Attention! To avoid tangling the fishing line, the extension of the fishing line should be a single blow. If you want to extend the fishing line further, you need to wait a few seconds before re-striking the stopper cap on the ground. The length of the fishing line must be maintained at a level equal to or close to the full diameter of the cutting. Attention! Do not leave the trimmer upright on the lock cap. Manual extension of the cutting line. If the cutting line is extremely worn out, it may not be possible to extend it by tapping the stopper onto the ground. In this case, you must perform the following steps to manually release the cutting line: 1. Release the switch and wait for the trimmer motor to stop. 2. Disconnect the trimmer from the power source. 3. Pull the fishing line sharply while pressing on the locking cap. Cleaning AND MAINTENANCE. Storage Before cleaning, release the switch, wait for the trimmer motor to stop, and disconnect the trimmer from the power source. Clean the inside and outside of the guard and the spool holder. Attention! Maintenance should only be carried out by an authorized service center. The trimmer must be kept in a dry, safe place, the operating instructions and all additional parts. This provides access to all the details and all the necessary information. 2. The ventilation holes of the trimmer must be clean. Clean dust and dirt regularly with a dry cloth. Do not use aggressive cleaning agents to clean the plastic parts of the trimmer. 3. Regularly lubricate all moving parts with grease. 4. Repair and maintenance should always be carried out in a specialized service center. 5. Do not leave the trimmer in the open sun. 6. Do not store the trimmer in a plastic bag to prevent moisture condensation on the instrument. 7. When finished, always clean the tool and check for malfunctions. 8. Do not leave the trimmer on the ground for a long period of time. This can lead to deformation of the protective cover and a safety hazard. 9. Store the trimmer by hanging it by the handle. Troubleshooting TROUBLE Malfunction Cause Corrective action When the coil cover hits the ground, the fishing line does not extend The coil cover is difficult to rotate Grass accumulation around the connecting shaft and the cutting head of the trimmer. Screw threads are dirty or damaged Mowing tall grass at ground level 15 Lubricate the fishing line with a special silicone spray. Install more scaffolds (see section “Replacing the cutting line) Pull the fishing line by hand, alternately pressing on the casing of the spool and releasing it. Remove the scaffold from the spool and rewind it. Clean the thread threads from dirt and grease them with grease. If this does not help, replace the coil cover. Cut the tall grass a little bit, starting from the top and gradually reducing the cutting level

9 If you find any other malfunctions not listed in this manual, as well as if a malfunction of the motor or power cord is found, contact an authorized service center. Disposal Observe the applicable regulations for disposal. Do not dispose of the power tool in a regular rubbish bin or chute. Changes Due to the continuous improvement of power tools, the manufacturer reserves the right to make design changes not described in this manual that do not reduce the consumer qualities of the product. The product meets the requirements of regulatory documents of Gosstandart of Russia. Eu Declaration of Conformity. We hereby certify that the electric trimmer brand Hammerflex ETR1100A complies with the directives: 98/37 / EC, 89/336 / EEC, 73/23 / EEC, EN50144, EN55014, EN This device complies with the CE directives for spark protection and safety for low-voltage devices; It is designed in accordance with the latest safety regulations. Manufacturer: Firm “Hammer Werkzeug GmbH”, “Hammer Werkzeug GmbH” Address: Niedenau 25, 60325, Frankfurt am Main, Germany Niedenau 25, 60325, Frankfurt am Main, Germany Produced in China If, despite careful monitoring of the production process, the tool is still out of order, the tool is repaired and any parts should be made only in a specialized service workshop. Warranty CONTRACTUAL AGREEMENT The following warranty is a voluntary supplementary service. Customer may use it in accordance with these warranty conditions. These warranties do not limit consumer statutory rights. 16 The warranty period of the product is 12 months from the date of sale. During the warranty period, the buyer has the right to free repair of the product due to malfunctions resulting from an identified material defect or manufacturing defect. The repair period is due to the complexity of the repair and the availability of spare parts in the warehouse and in some force majeure circumstances can be up to 45 business days. The guarantee does not cover any unforeseen expenses, as well as expenses resulting from or related to such reasons as travel and accommodation of people, transportation, additional costs associated with ensuring the availability of the product, renting cranes, loss of income, loss of time, damage to equipment operating in conjunction with this product, damage caused by third parties. If the coupon is not completely filled, the buyer loses the right to free repair. A lost warranty card is not subject to recovery. The product is not subject to free warranty repair in the following cases: 1. Lack of warranty card; Incorrect, incomplete filling or the presence of corrections in it. The absence of the signature and surname of the Buyer on this Agreement. 2. The serial number of the product has been removed, illegible, or changed. 3. Non-compliance by the user with the instructions for use; 4. If the product is damaged as a result of climatic events or natural disasters, improper or careless transportation, non-compliance with the rules of installation, installation and operation, careless handling, mechanical or chemical influences, use of poor-quality or non-conforming to those specified in accompanying documentation of operational materials, consumables. 5. If the technical characteristics of the product deteriorate as a result of its natural wear, including due to the use of low-quality or inappropriate lubricants specified in the accompanying documentation. 6. Previous repair or maintenance of the product was carried out properly, or by persons not authorized to do so, there is no mark in the TO map (see back). The presence in the product of disassembly traces or other interventions not provided for in the documentation, in its design, as well as in case of violation of the factory settings. Use of non-original spare parts and accessories of the manufacturer. Disassembled product. Product modification in any way. 7. External damage to the mechanism, attachment of a replacement tool, tool body, additional handle, power cord and plug. 8. Burnt windings of the armature and stator, uniform change of color of the armature windings, as well as joint failure of the switch, regulator, electrical circuits. 9. Strong contamination of the inside of the instrument with foreign objects (paint, shavings, etc.), resulting in breakage of the instrument. 17