How To Work With A Manual Tile Cutter On A Tile

Safety rules when working with the tool

Each instrument has its own safety, which must be observed without fail in order to exclude unpleasant consequences, such as deformation of the phalanges of the fingers and the like.

How To Work With A Manual Tile Cutter On A Tile

Safety regulations:

  • Before direct work, it is imperative to conduct a thorough inspection of the tool for malfunctions, since this can cause both breakage and accidents.
  • Before cutting the tiles, you need to do a couple of idle movements to make sure they are smooth and free of jolts.
  • Pay attention to the tubular guides, which should be as clean as possible. It is especially important that they are free of dirt. If there is contamination, then it is necessary to eliminate them, as well as traces of the solution with which the treatment is carried out. To make the operation of the device as efficient as possible, it is worth doing the processing of parts with machine oil.
  • It is necessary to inspect the cutting disc itself, since it should be in perfect condition, not bent, but rotation without fluctuations and along one axis. There should be no difficulties and obstacles in rotation, as well as additional whistle.
  • To avoid injury, you should wear special glasses and gloves.
  • Experts recommend checking the water supply to the disc before work, which will ensure quick work.

Cutting starts only after the blade reaches maximum speed.

Rules: how to work with a tile cutter and why you need one

Some people think that using a roller tile cutter is possible without preliminary preparation and even trivial reading of the instructions.

What can be the consequences:

  • Illiterately cut part of the tile.
  • Security breach.
  • Damage to health, in particular to the upper limbs.

If we consider in more detail the moment for which a tile cutter is needed, then at first glance it is the simplest device, which is not difficult to use and does not require professional special education. Hand tools are considered more convenient for use at home, since electrical ones are too difficult to work with.

Electric and manual tile cutters have the same names, but different purpose and method of operation. The only exception is the final result. An electric tool has a sharper incisor and cannot simply make a groove, as it cuts quickly and sharply. Electric cutters are either mains or battery powered, and some may look like a circular saw. In addition, when working with a power tool, there is the possibility of serious injury, since the diamond blade has too high a rotation speed.

Instructions: how to use a tile cutter, 3 main rules

Recommendations: how to properly cut tiles with a tile cutter

The instructions for the tile cutter do not contain special instructions on which professional training should be, and the work is carried out quickly and easily. However, it is worth following the recommendations from the manufacturer so that even such a simple moment as a tile cut is as correct as possible and without oversights.

Instructions:

  • The tool must be placed on a flat, stable surface. She must be solid.
  • It is imperative to check how sharp the cutter is, as well as the fastening strength of each element.
  • When cutting tiles, the order of work must be followed. Namely, on the front side of the tile, a fishing line is initially drawn along which the cut will be made. It is enough to use a pencil or marker and a ruler.
  • The tile is installed on the base of the tile cutter.
  • The tool must be set perpendicular to the working surface. To do this, you need to place a strong emphasis on the far corner of the device, and then correct the position of the canvas, be sure to take into account the mark made earlier.
  • It is important to remember that the reference point is taken on the central line located on the working surface of the unit.
  • Next, using the handle, the cutter is brought to the tile.
  • It should be installed on the edge of the product, the one that is closer to the master.
  • Then the handle is pressed firmly so that the cutter touches the tile surface. Thus, it will be sandwiched between the metal part and the rollers in the equipment.
  • To make a cut, it is enough to make a sharp and clear movement. Through it, a small groove is made from oneself to the opposite edge of the canvas.
  • After that, in order to break off the cut part of the tile, you need to press its handle and the blade will be broken along the previously drawn mowing line.

Thus, you can cut a tile and get two even parts of the product. the cutting line will be clear and without chipping, which will allow you to carry out repair work efficiently and without defects.

How to use a manual tile cutter

How to work correctly during construction and finishing work with ceramic tiles?

Need:

  • Be neat;
  • Think carefully about every step;
  • Use special cutting attachments.

You need to cut the tiles with a special tile cutter, a feature of which is the presence of a sharp cutter. As a rule, it is installed diamond, as it is a more durable and wear-resistant material. In order to carry out the cut, it is necessary to lay the blade on the base of the device so that the blade does not sway during the cut, and the cut is not made according to the previously drawn mowing line.

over, the device is perfect for home use. It is worth noting that handheld equipment has a number of advantages over an electric tool. It is small and much easier to handle. In addition, it is considered the safest.

How to use a manual tile cutter

A manual tile cutter is used much more often than an electric one, and we are talking not only about living conditions, but also about industrial ones. At first, the process of cutting tiles may seem daunting and almost impossible, but in reality it is only required to research the instructions and safety recommendations. There are many nuances in functioning, but all of them are not difficult to remember and one should not forget about them when working. Safety rules are considered especially important, and even more than the observance of the phased work.

What is a tile cutter and why is it needed

Many people have no idea what a tile cutter is or why such a tool is needed at all. If we consider this issue in more detail, then this is the most common apparatus that allows you to quickly and accurately cut ceramic tiles. Today, both manual and electric tools are actively used in construction. It is worth noting that it is easy to cope with operation only if a manual tile cutter is used, but some difficulties may arise with the electric option.

Even if you consider that both types of instruments have the same name, they are not at all alike. The only exception, of course, is the final result of the tool. In order to be able to use a manual tile cutter, you need to make grooves with it (the unit has very sharp incisors), and then break the tile. In turn, the electric type of tile cutter works with the help of a battery or from an electrical network, and in its appearance and in the principle of operation, it may slightly resemble a circular saw. The tiles are cut with a very sharp diamond blade that has an incredibly high rotation speed.

Devices and principle of operation of a manual tile cutter

The most important feature of this tool is that it has an incredibly sharp incisor. As a rule, a diamond cutter is used, which has the same principle of operation as a simple cutter. For correct and complete operation, it is necessary to install the processed tile directly on the base of the device. To ensure that the tile does not wobble and can be easily and evenly cut, there is a clamping part at the bottom of the manual tile cutter, which allows you to firmly fix the tile.

On this clamping part of the tool there is a cutter and several rollers that allow the tile cutter to move along the surface of the material. There is also a small handle on the carriage. It is she who is responsible for the different force of the onslaught on the tile and directly on the displacement of the cutter during operation.

Due to the fact that during the use of the tool there are no difficulties, it is very often used both in construction and in repair work that is carried out at home. A manual tile cutter has the advantage when compared to an electric tool, because it is small in size, in a short time the tool allows you to make an extremely straight cut on the tile.

READ  Better Cutting Porcelain Tile

If you consider that you need to cut very durable materials or too much tile, then in such a situation, a hand tool may not be enough. Of course, a huge role in this situation is played by human skills and directly by the manufacturer of this or that tool.

How to use a manual tile cutter

In order to perfectly cut ceramic tiles, in most cases a hand tool is used as a tile cutter. Mostly, to use it, you do not need to have professional skills, respectively, the tool can be quite successfully used at home.

The manual tile cutter has quite a lot of positive aspects, which include simple use, as a result, a very clear cut is obtained. The handle additionally also performs the function of a lever allowing to reduce the applied forces to a minimum.

At the same time, it was not about Bosch without some negative points. For example, a manual tile cutter cannot be used very close to the edge of the tile (the allowable distance for work must be at least five millimeters).

Before starting work, you must carefully learn how to use a manual tile cutter. If you have any difficulties in this matter, then on our website you can find. Where all the details and nuances are indicated.

How to properly cut tiles with a manual tile cutter

In order to start using a hand tool, you do not need to take any courses or receive any special training. First of all, you need to place the tool on a perfectly flat surface and, very importantly, a hard surface. Then it is necessary to check the sharpness of the cutter and how firmly all the main elements of the operating tool were fixed.

So, the tile needs to be cut according to the following instructions. At the same time, it is very important to follow the order in order to complete the work efficiently and quickly. How to use the tile cutter, you can also learn in more detail from the topic posted on our website.

  • On the front side of the tile, you need to draw a cut line. To do this, use a sharp pencil or marker, do not forget about the ruler.
  • After that, you need to bring the tile to the surface of the manual tile cutter, which is called the working.
  • Position the instrument clearly perpendicularly. To do this, you need to rest hard enough on the far side of the tile cutter, and then carefully adjust the position of the tile used, taking into account the marks that you made on its surface in advance. At the same time, do not forget that you need to focus on the central line, which is located at the base of the tool.
  • Use the handle to guide the cutter to the tile. It must be installed on the very edge of the product on the side that is closer to you.
  • After that, you need to press the handle hard enough so that the cutter can touch the tile. Thus, the tile must be pressed down with the metal part and the cutter rollers.
  • Then, with just one movement, which should be quite sharp and clear, you need to draw a small furrow from you and to the extreme edge of the tile that you are cutting.
  • In the end, in order to break the tile being processed, you need to slightly press the handle and the tile will break directly along the mowing line that you cut.

Thus, using a manual tile cutter, you can get two pieces of tiles of the size you need, which will have perfectly flat and incredibly neat edges at the break.

Safety rules when working with a tile cutter

In order to use a manual tile cutter it was as safe as possible and at the same time the result of the work was of high quality, you need to follow some safety rules, namely:

  • Before starting work, it is imperative to inspect the tool used so that you can identify all breakages and irregularities in the guides in time, then find and eliminate visible damage to the tile cutter.
  • You need to walk a couple of times on the tile with no load, and at the same time all movements must be smooth, without any jolts.
  • Do not forget to additionally check the tubular guides. they must be perfectly clean, free of dust and dirt. Remove pieces of tiles from them, traces of mortar and, as a result, to improve performance. lubricate with a small amount of machine oil.
  • In addition, you also need to pay attention to the cutting disc itself. Its condition should be ideal, in no case bent, and rotation around the axis of the attachment should occur without any difficulties. It should be noted that during the operation of the manual tile cutter, there should also be no extraneous sounds.
  • In order not to get any injuries, it is best to work with special glasses and gloves.
  • Some experts also recommend testing the water supply on the disc, which makes the job easier.
  • It is necessary to start work only after the disc picks up those revolutions that can be called maximum.

Manual tile cutter. many people have been asking how to use correctly lately, but in fact there is nothing complicated in this process. Every inexperienced beginner will be able to cope with the work. If, nevertheless, you cannot cut off the piece of tile you need, then on our website you will find with the most detailed instructions that will allow you to find out all the details and nuances of this type of work. Do not forget about safety rules, because your health and, of course, safety largely depends on this.

How to use a manual tile cutter correctly?

If you decide to tile floors or walls with ceramic tiles, then it will be difficult for you to do without a special tool that allows you to cut the tiles. The biggest advantage in this regard is the manual tile cutter. It consists of the actual cutting part and the wheel, with which the material is fixed and then broken after the cut.

Manual tile cutter diagram.

Training cutting

Automatic tile cutter diagram.

After that, you can start working, but not yet the main one. In order not to spoil the new good tile, experts recommend to start with a little practice on unnecessary pieces of the same material. Mark up and try to cut a piece.

Usually it is difficult to cut a thin piece of material. As a rule, if the thickness of the piece to be cut is 7 mm or less, then it is best to use an electric jigsaw. If this is not available, then you will have to make an incision, carefully break off what happens, and then, holding the marking line with a thick metal ruler, beat off the remaining parts. It is quite natural that with such work, the edge will not be perfectly flat.

But even in such situations, there is a way out. If you have made markings on the tiles in advance and you know that you will have to work a lot with thin pieces of cut tiles, it makes sense to purchase or rent a special diamond new wheel. Due to its maximum thinness and increased strength and sharpness, you can easily cut off even a very thin piece of ceramic tile, while leaving no chipping or torn edges.

Preparing the tool for work

To do this, first you need to check the strength of the wheel that will be used for cutting. It is usually attached to the main handle with a small bolt. So this bolt must be tightened so that it holds as tightly as possible, and then check if the cutting part is staggering to the sides.

Also note the sharpness of the wheel. If the cutter is not new, it may become dull. Then you will need to either sharpen it or replace it. After all, the whole principle of operation lies in the quality of such a wheel.

When you are sure that the tile cutter is in good working order, add some oil to the wheel. It can be either machine oil or ordinary vegetable oil. Its presence is necessary in order for the cutting to be smoother and more even.

Cutting ceramic tiles with a tile cutter

Tile cutting techniques: a. marking with a thickness gauge; b. cutting the glaze with a chisel; c, d. breaking a tile along a notch on a bar and a tile breaker.

After such a short workout, you can get to work. First, prepare the tile itself. Wipe it dry. After that, apply a brighter color to the cut line, and then stick a strip of masking tape directly along this mowing line. This is necessary in order to cut smoother and faster.

Then place the tile cutter on a flat, clean surface. Take a tile and fix it in the tile cutter so that the wheel and line of the cut on the markings coincide as much as possible. At the same time, secure the material well with special levers so that it does not move to the sides.

Then, with one hand, grasp the handle that adjusts the wheel, and support the tile with the other. Then lift the handle up and slowly move it towards you so that the wheel is firmly in contact with the line mowing line, leaving a notch there. Make only one move of the wheel in one direction, as a cut made several times will not make it possible to obtain a high-quality and even cut.

Now you need to break the material. To do this, lower and press the wheel with all force against the tile, then lightly hit the handle. The tile should break evenly. If this does not happen, then you need to hit even harder. You can also put the wheel in the middle, (just do not make a cut), then hit the handle again.

READ  How To Choose A Cordless Screwdriver For Work

Many people ask the question: how to cut a tile, if you want to make not an even cut, but a pattern with jags? It should be noted that the principle is the same here. It’s just that you will spend a little more time due to the fact that when you apply the cutting line with the wheel, you will have to constantly turn the tile and fasten it using special wings that are provided on the tile cutter. You will have to turn exactly as many times as the notch lines you have marked. And after that, just as described above, you will need to chop off a piece.

Particular attention should also be paid to the processing of the cut edge. Even with a fairly good cutting process, you will have a sharp edge. It is advisable to walk on it with a light sander so that the line is smoother. First, it will make the future tiling process safer. And secondly, as a result, the styling itself will look almost perfect. It is especially important to do such a grinding when after cutting there are notches visible to the eye.

So, the process of cutting ceramic tiles using a tile cutter is considered. Working as a manual tile cutter with your own hands is quite easy if you follow the above advice. But as far as porcelain stoneware tiles are concerned, here the tile cutter may not fully help, since such a tile is best cut by means of a special device. And for ceramic tiles, the manual version of the tile cutter is optimal.

Features of cutting corners and curly lines

It is convenient to make various shaped cuts and to carry out precise adjustment of fragments during masonry work with the help of a tile cutter-tongs.

The sequence of work is as follows:

  • Marking line is drawn on the front glossy side;
  • The marking cutter roller is pressed against the glazed surface and in one motion a deep cut is made along the marked mowing line;
  • The jaws of the device are placed on the cutting line so that the tool legs are at the top (on the glaze);
  • The intended line should fit exactly in the middle between the lateral planes of the corners (legs);
  • Gently move and squeeze the handles, separating the unnecessary fragment.

Cutting tiles in this way rarely achieves good edge quality. To level the mowing line of the cut and remove small jags, the edges are sanded with a file or sandpaper.

It is best to use a hand tool to cut the corner neatly, but with a little skill, this can be done with an electric cutter. Thin strips of tiles are cut with a pencil tile cutter. To do this, a groove is scratched on the surface of the tile material with a marking cutting edge, then the edge of the product is inserted between the jaws of the breaker and separated by pressing on the device.

Manual

There are the following types of hand tools for cutting tiles:

  • Roller. The simplest device, which is a cutting roller (diamond or carbide) on a plastic or wooden handle.
  • Mechanical tile cutter. Tubular guides are fixed on the base frame, along which a special carriage with a working cutting element (roller) moves.
  • Tile cutting pliers. The tool looks like simple pliers. The cutting roller is located on one side of the holding elements (jaws), on the other. a special plate with paws is placed.
  • Pencil tile cutter with breaker. A thin metal bar with a tungsten roller at one end for marking and slicing, and at the opposite end with carbide-tipped tabs for breaking material.

Electric

The electric tile cutter is a special tool for cutting tile material. It allows you to quickly and efficiently work with a large number of tiles.

There are the following designs of electrically driven tile cutters:

  • Manual electric cutter. The equipment is similar in principle to a modified and improved circular saw, complete with a diamond cutting blade. It is difficult to make high quality cut with this tool and it is inconvenient for a large amount of work. But it is distinguished by its mobility and it can cut off tiles that are already glued to a vertical wall.
  • Horizontal floor (engine below). The electric motor is fixed under the work platform. The cutting element partially protrudes above the table surface through a special slot, the lower part of the disc is immersed in a container with water. The liquid cools the cutting element and reduces the amount of dust generated during operation. The tool allows you to cut tiles of any size, because there are no dimensional limits on the desktop.
  • Top-engine horizontal tile cutter (bridge or rail). The massive support frame is stationary; guides (monorail) are installed on its edge. The carriage with the motor, in which the saw blade is installed, moves along the monorail. Cooling water is pumped to the cutting element.
  • The machine with the upper arrangement of the electric drive and the movable bed (console). An engine with a cutting element is mounted on a stationary frame. The material to be processed is placed on a movable platform that moves along the frame guides. These models of tile cutters are professional equipment, they allow you to provide high-quality cutting at high speed.

Appointment of the tile cutter

It is possible to qualitatively cut ceramic tiles only with a specialized tool. a tile cutter. This tool is designed for cutting glass, stone and glazed tiles.

Safety technique

Working with hand tools does not pose any particular danger to humans. Safety measures include the use of special plastic glasses to protect the eyes from dust particles and possible debris, as well as heavy construction gloves to protect hands from scratches and cuts. Floor tiles, which have increased hardness, require especially careful handling, since sharp and traumatic edges are formed when cutting. If a lot of dust is emitted during work, then a respirator is used to protect the respiratory system.

When cutting with an electric cutter, it is not allowed to bury the cutting diamond disc into the material being processed more than half. Do not clean or change the cut-off wheel while the equipment is plugged in. De-energize the unit first.

For floor tiles

Thick floor or textured (corrugated or wavy) ceramic tiles are cut with a special electric tool equipped with a cooling system. A small number of cuts can be made with a reinforced hand tool, but the edge quality will be poor. It is better to work with porcelain stoneware with an electric cutter, since this hard material is poorly processed. Correctly selected tool will allow you to get a high-quality product and reduce the percentage of scrap to zero.

How to use a manual tile cutter

It is possible to obtain two pieces of tiles of a given size with good edge quality using a mechanical tool. There are no special secrets in this, it is only important to follow the sequence of work.

The technology for cutting tiles with a manual tile cutter consists of the following steps:

  • On the front surface of the material with a felt-tip pen or a marker along a ruler, apply a marking line.
  • Fix the tile using the stops provided in the structure, while the marking line must be exactly under the cutting edge of the marking wheel.
  • Place the working disc at the beginning of the line and press it slightly against the work surface.
  • Move the roller carriage along the cut line using the handle. The movement should be fluid and strong enough to cut through the frosting. Excessive pressure can break fragile tiles, and insufficient force will prevent cutting the glazed coating and then gently breaking the tile.
  • Move the handle to the middle, then break the tile with a sharp movement by lowering the lever. If the mechanism is not equipped with a lever, then the tile is placed on the edge of the workbench or table along the scratched mowing line, then the protruding part is broken off by pressing on it.

If all actions were performed correctly, then the material breaks exactly along the groove made. You can cut tiles at an angle of 45 °, for this, some models have a swivel base and a special built-in ruler.

How to work with an electric tile cutter

A professional electric tool will help you quickly and evenly cut the part of the required size from the workpiece, as well as make a diagonal or curved cut. Such equipment easily copes with ceramic and floor tiles with a thickness of over 16 mm.

You need to cut tiles with an electric tile cutter using the following technology:

  • We install the unit on a flat and stable base (workbench, table);
  • Apply markings on the glazed side with a marker or felt-tip pen;
  • We place the workpiece on the working surface of the device, aligning the beginning of the drawn mowing line with the pointer;
  • We turn on the engine of the unit;
  • We cut the tile, carefully pushing it to the cutting disc (when the cutting element comes into contact with the material being processed, we increase the force);
  • Turn off the device.

If a model of an electric cutter with an upper engine is used, then the part to be cut is firmly fixed on the bed (abuts against special clamps), and then the saw head is lowered onto it. Start the cut from the edge of the mowing line.

Which tool to choose?

When choosing a fixture for working with tiles, the following important factors must be considered:

  • The nature of the cut. If you do not need to make a curly cut or cut a corner in a tile, then you can get by with a simple hand tool.
  • Material thickness. Not every device can handle thick and hard material. In this case, you need to use a good electric tile cutter.
  • Scope of work. When making a large number of cuts, professional equipment is more convenient.

Household factors also influence the choice of the instrument. Sometimes it is impossible to use a noisy unit or it is desirable to work without the formation of dust. Often it is impossible to use large equipment (machine) in a cramped room.

READ  Operation Electric Brush Cutter Bosch Ahs 45 16

Working with a tile cutter

Use the tile cutter as follows:

Tile cutting scheme with glass cutter.

  • Check the condition of the device: the roller must be level and rotate freely; the carriage moves smoothly and without jerks; the bed and the arm must be clean and free from mechanical damage.
  • On the surface of the glaze of the tile, a cut is marked with a pencil or marker.
  • The tile is placed on the bed so that the line of the line is aligned with the direction in which the cutter roller moves.
  • By moving the handle away from you, a roller is drawn with slight pressure along the mowing line of the marking. A clearly visible groove should remain on the front side of the tile. You cannot hold the roller twice, the cut will not work out even.
  • Once the cutter wheel has reached the end of the cutter line, the feet are positioned on either side of the cutter line of the cut and the lever is pressed. Experienced craftsmen simply hit the lever with a short sharp movement, the tiles break along the mowing line. The width of the cut part must be at least 10 mm.

It is recommended to keep the tiles in water for 20-60 minutes before cutting. Excess air will leave it, the fracture will occur more cleanly and easily. Makes it easier to cut and a drop of machine oil applied to the line of the cut.

Manual tile cutter device

Every home craftsman can easily learn how to use a manual tile cutter. A manual tile cutter may have some distinctive features, but in any case it consists of parts and assemblies of the same purpose:

  • Bed (platform).
  • Carriage.
  • Cutting roller.
  • Lever.
  • Guides.
  • Support for guides.
  • Tile breaking feet.

Manual tile cutter: device, how to use at home

Ceramic tiles are often used to finish the surfaces of walls and floors in various industrial and domestic premises. It’s hard to imagine a bathroom without tiles, and a kitchen without a tiled backsplash.

Diagram of a manual tile cutter.

Experts recommend using a tile cutter for this purpose. It is a very simple tool that works without noise and dust. It does not require professional skills. Even a schoolboy can handle the job. How to use the tile cutter?

Ceramic tiles are usually made of clay, covered with a layer of colored glaze on top and fired at a high temperature. After firing, the product acquires an attractive appearance, special durability and strength. The finished tile does not deform, does not bend, but remains fragile enough and breaks easily. These properties must be taken into account when cutting material.

Other cutting methods

Electric tile cutter tile cutting scheme.

Several pieces of ceramic tiles, especially wall tiles, can be cut with a hand-held roller glass cutter. How do I use this type of tile cutter? After the risks are carried out, the tiles are placed on a hard surface (on a table, on thick plywood), a match, a nail, a wire are placed under the cut line and the tile is broken, pressing with palms on both sides of the cut. You can put the tiles on the edge of the table, aligning the cut with it, and push on the hanging part.

Simple cuts can be made with a hand-held tile cutter using tongs. The tool is cheap and simple. At home, he can cope with a small amount of work. Cutting takes place as follows:

  • The line of the cut is marked.
  • The tiles are laid on a hard surface.
  • The cutter wheel, which is slightly larger than the glass cutter’s cutting element, makes an incision.
  • Tongs are installed to the edge of the cut with a wide plate to the face of the tile, squeeze the handles of the tool, the tile breaks.

All of the above recommendations apply only to cutting ceramic glazed tiles and are not suitable for processing other materials such as porcelain or stone.

When choosing a hand-held tile cutter, remember that a tile cutter is a hybrid of a glass cutter and a pair of pincers with special paws that help break tiles along the cut mowing line. This tool can cut material up to 8 mm thick. Porcelain stoneware cannot be cut.

A mechanical tile cutter is a tool with more possibilities. It cuts tiles up to 12 mm thick. Some models are capable of cutting thicker tiles. The packaging of the tool usually says which tiles it can cut. There are varieties of tile cutters equipped with a stop for fixing tiles when cutting them diagonally. Reduce the pressure on the lever as the cutter wheel approaches the edge of the tile. Otherwise, the roller will slip off the material and may receive mechanical damage when hitting the bed. The disadvantage of the device is its not very high quality.

To cut thin tiles that are used for wall cladding, tile cutters are used, some of which are made of plastic. For thick floor tiles and porcelain stoneware, only steel tools are used. It is best to use electrically powered tile cutters to cut all kinds of holes and recesses in tiles. After the cut, all edges are processed if necessary with a sandpaper and a file. Now you know how to use the tile cutter. Try it, everything should work out.

Bieber 55521

A hand-cut tile tool made of high quality metal, shaped like a pencil with a breaker. Used for trimming tile material, works on tiles and glass.

Any self-respecting master knows how to work with such a manual tile cutter.

Montolit masterpiuma 63p3

Another mechanical monorail model equipped with a pair of millimeter rulers and lateral stop elements. It is used for cutting tiles and mosaic glass. A roller with a diameter of 1.4 cm cuts material 2.2 cm deep, weighs within nine kilograms, and costs about twenty-five thousand rubles. Made by an Italian company, used by professional craftsmen.

What are the criteria for choosing a tile cutting tool

Before you start using a manual tile cutter, you should choose the right one, taking into account all the nuances and distinctive features. There are certain points that must be paid attention to:

  • Full compliance with the stated requirements. The strength of the cutting part is selected taking into account the material intended for cutting, the maximum parameters of the depth and length of cutting are determined based on the parameters of the tiles used in the repair;
  • Good build quality. The tile cutter is visually inspected for defects, the lever is moved to make sure there is no backlash. From pressing the lever, the guides should remain flat and not bend;
  • Tilting pruning capability. This is a useful function, with its help the tile material in the corner sections is adjusted as accurately as possible. The working platform is easy to adjust, the installation after fixing does not get lost, the backlash does not appear;
  • Availability of spare parts and consumables that periodically need replacement.

Manual tile cutter: how to cut tiles correctly?

Enkor 3660

Power tool double rail tile cutter that cuts ceramic tiles. The diameter of the cutting roller is 1.5 cm, with a thickness of 1.5 mm and a bore size of 6 mm, which cuts tiles up to six millimeters deep. Such a device weighs only a couple of kilograms, it costs within one thousand rubles.

The model is inexpensive and lightweight, it is considered a good repair assistant.

Rubi star 61

A double-rail tool with side supports for cutting tiles. Interchangeable rollers, six and ten millimeters, provide high-quality cutting, the maximum length of which reaches 63 cm.This tile cutter weighs no more than four kilograms, it costs seven thousand rubles.

Hand tool for professionals and hobbyists

Tile cutters are deliberately divided into such groups. The amateur version is not very expensive, but does not withstand prolonged load. Additional functionality is missing, or its quality is poor. Such a tool is used for a single repair.

A professional-grade tool will cost you quite a lot, but the price difference will pay off with high-quality assembly and good components, accurate design calculations. Cutting is performed better, the operating period of the tool increases.

For convenient use, the kit includes rulers, stop elements, squares and other accessories. The tile cutter of this group is popular among decorators.

Manual tile cutter

When working with cladding material or laying sidewalk paths, it is often necessary to cut individual elements to the exact dimensions. A similar problem is solved using a manual tile cutter, the selection criteria for which are offered to your attention in this article.

Cutting with a manual tile cutter: the benefits

Before cutting a tile with a tile cutter, many experts decide to do it with a hand tool, finding certain advantages in that:

  • The instrument runs silently. The electric tile cutter makes a loud noise due to the motor running and the cut-off wheel coming into contact with the material. In mechanical tools, there are no such parts, hence the level of noise emitted is negligible. This fact is especially relevant in homes with small children;
  • No need to connect to the electrical network. A mechanical tool for trimming tiles works on the muscular force of the master, transmitted through a lever to the cutting edge, so that the model functions completely without electricity;
  • Tool reliability. A mechanical tile cutter consists of a minimum set of elements that can lose their functionality. This is explained by a simple construction. By choosing the right tool, you can use it for a long time;
  • Low weight. The average weight of the tile cutter varies between two and ten kilograms, which makes it possible to move the tool from one workplace to another;
  • Additional equipment items. Most tile cutters come with a “ballerina”, with which you can easily make a hole in the tile;
  • Some models have an additional function to cut glass.

You can learn how to work with a manual tile cutter from the Internet.