Installation of a starter on a Viking lawn mower. The cost of repairing lawn mowers Viking*

Starters for lawn mower: device and installation features

A manual starter for a lawn mower or a gasoline trimmer for grass is a mechanical node, which includes a pulley placed on a ratchet. On the pulley in the starting position of the rope wound. At starting, it stretches out. The pulley is spring.loaded. you should release the end of the rope, how it drowns back. As a spring, a flat ribbon shaped in the ring is used. It resembles a spring in large mechanical watches that start once a day. The starter itself is located more often on the rear than closer to the front end of the mowing or trimmer for grass. To correctly produce all manipulations with a starter for a lawn mower, you need to know the features of the device and installation.

Starter- a mechanism as a whole and universal for benzos, trimmers, gasoline and diesel-generating units. It is not a problem to equip even a car, motorcycle or scooter if your vehicle is free to install it. It is not for nothing that many Soviet cars and trucks were equipped with a starting tool, remotely reminiscent of a bent mount bent twice.

The modern “handbrake” starts from the cord. it is tied to the mechanism, and it is impossible to lose.

The starter assembly has the following details:

• Spring spring with hook;
• cord wound on a coil;
• Return spring;
• Temporary drive and the main spring;
• The body of the mechanism protecting the ratchet;
• Stop bolt.

The worst variant of the breakdown

There are times when the starter still retained performance, but can break, for example, a worn cord. The ratchet had not yet managed to work when starting the engine, and the rest of the cord is immediately wound on the coil, the return spring is deprived of hooks, grooves break in the starter case. The result. replacement of both springs and housings.

If the model of a lawn mower or a trimmer for grass has long been discontinued, it will be difficult to find exactly the same spare parts, and the starter changes entirely.

Lawn mowed Viking MB248T

Good day community readers. I want to share the experience of using a lawn mower, although it is not a direct text “tool”, but all the same it is a tool for care for the garden. Especially quite difficult to execute, not just a “screwdriver”.

I’ll start with the fact that last year I was stealing with a sultry summer to mow grass in my summer cottage, to clear the territory and reduce the habitat of mosquitoes, of which if not millions, then thousands. Once lended a friend of a pitch wearable Stihl with a disk knife from a friend. That I didn’t like it: it is very noisy, smokes (exaggeratedly) and vibrates very much, after a couple of hours of work, the hands shook like a paralytic, my head from noise and sweat still pouring hail, as if I mowed with an ordinary manual scythe. Maybe I used it wrong, I don’t know, but I did as I was told, in general, one negative from use. But the only thing as it turned out that the cut of the disk iron, the small bushes cut off with a bang, the scythe would not have oiled, thread or forest mowers could not say that way.

In the dry balance, it was decided to buy a mower on wheels, since the site is quite even on the surface and large open territories. I looked for shopping, went in a couple, found a rather interesting Viking company with a wide variety of mowers, which is all the more unit of my beloved company STIHL. He began to read reviews about such equipment, the video and reviews were at least at that time, but still I decided to buy Viking mitch. For the price and capabilities, I liked the 248t model, 4.stroke gasoline, has a BS engine, 450 E OHV series of Briggs Stratton made under American license. Badge T means that self.propelled, without icon t, you need to push it yourself. The choice was between 253t and 248t, the difference is only in the width of the mowing 51 cm and 46 cm and in price the first is more expensive. As a result, it finally made a choice for 248t and was not in vain, as it turned out on my site there are places where 248 would barely crawl or sink evenly. Wide would not fit.Link to the site and description here Viking MB248T

After acquiring, a liter of gasoline was refueled in the trading floor and defiantly brought me down, they say everything works, take it and use it. True, the manager broke Plastmassk, which holds the cables, but as it turned out not critical, and without it works. Then I came to them in a week for the spare part, they said, well, okay, it doesn’t affect anything, I scored in short.

My mower has number 248.3t, such as modification of a new generation, they modernize change, which is good.

The braid has a button-rocking button, I think this is a swing of fuel in a carburetor. People sometimes pumped and the motor then started poorly. I click 2 times according to the instructions and the engine is always launched from one snap. It also starts to hot at once, the engine works smoothly and without gaps. At the first speed, a black smoke is visible from the exhaust, and then the smoke is not noticeable neither white nor black.

Pros: 1. self-income: it yourself does not go, you need to push, connect the drive and turn off, pushing, pulling, no one forbids, in narrow places and turns, it has to be with your hands, but t.to. The weight is small, pushes without much effort. The drive speed is approximately 4 kmh, you go behind it with a quick move, it is very convenient, the load on the mower is minimal2. starts the first time, always! The engine is like a clock. There is also enough power, on high grass it is a bit load but still everything mismers.3. The mower itself is light, 27 kg, I drag it into the car body and easily4. Different levels of the mowing (7) are easily adjusted with one hand, I usually go to the 4m, so that there is no bald lawn and not bite the ground, and there is no very high too.5. It is conveniently maneuveraged, even a woman will cope with the span of TC self.propelled, easy to mow6. After mowing, the territory turns into a beautiful even lawn, like a football field 🙂 7. Very economical, a liter of fuel was enough for almost the whole summer, you fill in both mowing and mowing, in general, if a small area, then there is enough fuel for a long time. Also, the speed of the mowing is fast, I am all my plot for half an hour easily. T.to. The engine is 4x, you pour the 92nd gasoline in its pure form and there is no smoke from the exhaust, there is also no particularly smell of exhaust, apparently due to the good tuning of the carburetor, ignition and others like them. I remember the smell from the gas generator was so good when it works for a long time.eight. A fairly low noise level, even a small 10.month son was not afraid for the first time he saw9. The handle is coordinated in half for transportation and winter storage, you can carry it almost in the trunk of any car.

Cons: 1. Well, it’s unlikely to call it a minus, but with a high grass the grass collector is quickly filled, you have to change and drag the basket to empty, even more time goes to emptying it than the mowing 🙂 But if the grass is low, then it will not be filled so quickly.2. In the areas in the stump along the fence, at home, in short, the spit is impossible, the handle is interfered. There are models of electrocosyles that have a rotary handle and there is no such drawback. Alas, you have to mow a little further away and then the remains with a sickle, reacify with your hands.3. The plot should be quite even, otherwise they skip the wheel and can even sit on the hill with a knife and stall, once it was like that. Bitch, metal objects, stones on the site are also unacceptable, otherwise you can break the knife. I flew into a couple of metal things and a brick flew when I mowed at first, a knife in several places is a hacker, but not critical. Once wound on the wire, and so abruptly and strongly that the wheel cracked from the side blow, but the wheel is properly and everything works, the aesthetic look went bad.four. there is no nozzle for mulching and there is no way to buy it, on senior models there is this. But I do not consider this a special minus, t.to. Then the scattered grass will turn yellow and will interfere like garbage. Others may be a possibility. Tacto the braid itself grinds the grass well, heavily chopped into the bunker, I mulched plantings, greenhouse with this grass last year.

This season I changed my oil, after working for about 15 minutes, he heated the engine, and poured the old oil on hot and flooded the fresh. The oil, as it turned out, was quite clean, transparent, without metal chips, etc., maybe due to the fact that I worked little, but in principle I used it in two weeks all summer, and mowed a couple of times a mother.in.law a couple of times.

Device

All electric lawns are arranged the same. They have a platform for mounting a motor whose shaft is parallel to the ground. A knife (or two) is fixed on the shaft of the electrical device, with which weeds mush. To make the mowing high.quality, the speed of the cutting electrical tool should be high.

The platform itself for convenience is supplied with four wheels and a handle with the elements mounted on it that control the engine. It is designed to push the device forward and control an electric mower.

Wheel fastening can be stiff and be rotary. In the first case, you will have to raise two wheels in the corners. Rotary ones provide for the use of lower physical strength.

In addition, they “spoil” the lawn less. Therefore, if flowers are planted on the lawn, there are swings, arbors, etc.D., it is recommended to use rotary wheels. Electric lawns with such wheels are convenient for caring for areas under shrubs and trees.

The engine is closed by a case that simultaneously protects from injury by random objects of an operator working with an electric lawn mower. The material used for its manufacture is more often plastic and less often. metal. As you can see, the device of the electric municipal mower of the electric is quite simple.

The most common malfunctions of the lawn mower

As for problems with failure or jamming of the engine, they are practically not found in the lawn mowers of the cart type, which we consider in the article. These malfunctions are more likely inherent in the gas.type gasoline braids and make up almost half the reasons for their users’ contacts in service centers.

Peculiarities

Viking has established itself in the market due to its high European standards and features of devices produced, among which several can be distinguished:

• The frame of the devices is made of particularly strong steel, which protects the device from external damage and reliably fixes all control elements;
• The corrugated coating applied to the wheels enhances the clutch with the surface of the soil, but at the same time they do not damage the cover of the grass and do not harm its growth;
• The knives are made of stainless steel of high quality, which reduces the risk of oxidation of grass and its further yellowing;
• The design of each lawn mower provides for noise-saving gaskets that reduce the noise level to 98-99 decibels;
• The devices have a functional folding handle, which increases ergonomics.

Gasoline

A very common type of lawn mower, as they have high efficiency and low price. But like all devices on gasoline engines, they have one major drawback. harmful emissions into the atmosphere. They are also quite bulky and heavy, but the results of their work can pleasantly surprise any gardener.

The lines contain gasoline self.propelled specimens, which are considered the best among competitors, as they are more reliable and autonomous.

Electric

Electric shoes are convenient to operate, do not harm nature, are easily controlled and very quiet. All this will provide comfort when caring for a garden. But they have their own shortcomings: they require a constant source of electricity, quickly become unusable, and they overheat greatly.

Also, do not forget that moisture is the main enemy of electrical appliances, so you can’t work on a wet grass with an electric mow.

But even if such a technique has broken, then buying a new one will not be difficult, since the for these devices are small.

Battery

This is ideal for people who monitor the purity of the world and are not able to constantly be at the sources of electricity. Battery lawmakers are small and comfortable to use. On average, one charge is enough up to 6-8 hours of continuous work without any emissions into the atmosphere.

It is worth considering only the minus that the battleships on the batteries are not so powerful, so it will not work to process a large area at a time.

Also, after breakdown, the device cannot simply be thrown away, but it is necessary to find a special place where it will be dismantled and disposed of the battery.

Robot mower

An innovation in the market for care techniques. The main disadvantage of such mowers is the price and low distribution in such a device will retain you a lot of time, because it is completely autonomous and does not need human help. Flexible settings will allow you to adjust the operation of the device to the smallest detail, and the installed cameras and sensors will help control the condition and location of the lawn mower.

Before buying the device, it is worth checking the surface of the bevel. it should be as flat as possible, and also make sure that during operation the mower is not threatened by danger from outside.

The lineup

This list presents the best lawnmands from Viking, which will make your new hobby garden.

Lawn mowers (lawn mower)

• country manufacturer. Switzerland;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 1.6 sq. km;
• weight. 25 kg;
• the area of ​​capture of the blades is 500 mm;
• bevel height. 867 mm;
• emission of mowed grass. rear section;
• The type of grass collector is solid;
• the volume of the grass collector. 57 l;
• Type of wheel drive. absent;
• The number of wheels is 4;
• Mulching is absent;
• warranty period. 1 year;
• the number of cylinders. 2;
• type of motor. four.stroke piston.

MB 248. non.self.propelled lawn mower related to the type of gasoline household. Was designed to care for the lawn and grass on an area of ​​no more than 1.6 square kilometers.

It easily copes with thick grass, reeds, a thoroughfoot and other plants thanks to a number of very sharp stainless steel blades and a 1331 cm3 carburetor.

The lawn mower is equipped with a four.stroke internal combustion engine, the volume of which is 134 cm. Starts using an external cable.

The device has a stepped central-regulated height system, which allows you to mow the lawn from 37 to 80 mm in height. The capture area of ​​the blades is 500 mm. The waste of the grass occurs in one accessible way. it is collected in a special department located in the back. To control the filling on the top cover of the mowing, an indicator is installed, which will notify you if the tank is completely filled with grass.

The wheels for greater stabilization are strengthened by double shock.absorbing bearings, which increases their service life and helps in adjusting the course.

• country manufacturer. Austria;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 1.5 sq. km;
• weight. 30 kg;
• the area of ​​capture of the blades is 456 mm;
• bevel height. 645 mm;
• emission of mowed grass. rear section;
• The type of grass collector is solid;
• The volume of the grass collector is absent;
• Type of wheel drive. absent;
• The number of wheels is 4;
• Mulching. present;
• warranty period.1.5 years;
• the number of cylinders. 2;
• type of motor. four.stroke piston.

MV 2 RT. a front.wheel drive gas with a self.propelled gun, belongs to household apparatus for a garden and is intended to work on an area of ​​up to 1.5 square kilometers. Equipped with a powerful engine of 198 liters. A feature of this model is the useful function of BioClip, in other words, mulching. Sharp gears built inwardly interrupted the grass into small particles, and then, through a special side hole, the grass is thrown out.

This allows you to fertilize herbal cover immediately in the process.

The suspension is reinforced with metal inserts that will maintain the entire design while working on uneven soil.

• country manufacturer. Switzerland;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 2.5 sq. km;
• weight. 43 kg;
• the area of ​​capture of the blades is 545 mm;
• bevel height. 523 mm;
• emission of mowed grass. rear section;
• type of grass collector. fabric;
• the volume of the grass collector. 45 liters;
• Type of wheel drive. present;
• The number of wheels is 3;
• Mulching. present;
• warranty period. 1 year;
• the number of cylinders. 3;
• type of motor. four.stroke piston.

This lawn mower was created to process large areas and to combat high grass. To do this, the design has a lawn rink, which will compact the grass before mowing, thereby increasing the efficiency of the blades. The grass itself enters the rear grass collector. The device is equipped with only three large wheels, but due to their size the stability of the machine does not suffer at all, and moving connections between them help to overcome any irregularities.

Despite large dimensions, MB 640T is easily versed, the assembly will take no more than 5 minutes.

Electrics

• country manufacturer. Switzerland;
• type of power. an electric motor;
• The middle area of ​​land cultivation is 600 kV. m;
• weight. 12 kg;
• the area of ​​capture of the blades is 356 mm;
• bevel height. 324 mm;
• emission of mowed grass. rear section;
• type of grass collector. fabric;
• the volume of the grass collector. 50 l;
• Type of wheel drive. front;
• The number of wheels is 4;
• Mulching is absent;
• warranty period –2 years;
• the number of cylinders. 3;
• type of motor. two.stroke piston.

Despite the low engine power, the volume of mowing grass is quite large. This provides one large knife with a rotation radius of 50 cm, as well as its coating, which protects the blade from corrosion and from microcracks. Also in MA340, automatic height regulators are installed, which themselves set up a mower to the desired level of mowing. Another advantage of the electric coser is its small.sized, which simplifies the storage and operation of this technique.

All the necessary buttons are placed on the handle, so you don’t have to spend much time on their search, and the protected cord will protect you from a random shock.

Of the disadvantages, it can be noted that the electric car has unreliable engine mounts, which can be shattered in a month, as a result of which there is a risk of motor breakdown.

• country manufacturer. Austria;
• type of power. an electric motor;
• The middle area of ​​land cultivation is 1 kV. km;
• weight. 23 kg;
• the area of ​​capture of the blades is 400 mm;
• bevel height. 388 mm;
• emission of mowed grass. rear section;
• type of grass collector. plastic;
• the volume of the grass collector. 65 liters;
• Type of wheel drive. rear;
• The number of wheels is 4;
• Mulching. optional;
• warranty period –2 years;
• the number of cylinders. 2;
• type of motor. two.stroke piston.

The lineup

This list presents the best lawnmands from Viking, which will make your new hobby garden.

Lawn mowers (lawn mower)

• country manufacturer. Switzerland;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 1.6 sq. km;
• weight. 25 kg;
• the area of ​​capture of the blades is 500 mm;
• bevel height. 867 mm;
• emission of mowed grass. rear section;
• The type of grass collector is solid;
• the volume of the grass collector. 57 l;
• Type of wheel drive. absent;
• The number of wheels is 4;
• Mulching is absent;
• warranty period. 1 year;
• the number of cylinders. 2;
• type of motor. four.stroke piston.

MB 248. non.self.propelled lawn mower related to the type of gasoline household. Was designed to care for the lawn and grass on an area of ​​no more than 1.6 square kilometers.

It easily copes with thick grass, reeds, a thoroughfoot and other plants thanks to a number of very sharp stainless steel blades and a 1331 cm3 carburetor.

The lawn mower is equipped with a four.stroke internal combustion engine, the volume of which is 134 cm. Starts using an external cable.

The device has a stepped central-regulated height system, which allows you to mow the lawn from 37 to 80 mm in height. The capture area of ​​the blades is 500 mm. The waste of the grass occurs in one accessible way. it is collected in a special department located in the back. To control the filling on the top cover of the mowing, an indicator is installed, which will notify you if the tank is completely filled with grass.

The wheels for greater stabilization are strengthened by double shock.absorbing bearings, which increases their service life and helps in adjusting the course.

• country manufacturer. Austria;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 1.5 sq. km;
• weight. 30 kg;
• the area of ​​capture of the blades is 456 mm;
• bevel height. 645 mm;
• emission of mowed grass. rear section;
• The type of grass collector is solid;
• The volume of the grass collector is absent;
• Type of wheel drive. absent;
• The number of wheels is 4;
• Mulching. present;
• warranty period.1.5 years;
• the number of cylinders. 2;
• type of motor. four.stroke piston.

MV 2 RT. a front.wheel drive gas with a self.propelled gun, belongs to household apparatus for a garden and is intended to work on an area of ​​up to 1.5 square kilometers. Equipped with a powerful engine of 198 liters. A feature of this model is the useful function of BioClip, in other words, mulching. Sharp gears built inwardly interrupted the grass into small particles, and then, through a special side hole, the grass is thrown out.

This allows you to fertilize herbal cover immediately in the process.

The suspension is reinforced with metal inserts that will maintain the entire design while working on uneven soil.

• country manufacturer. Switzerland;
• type of power. gasoline motor;
• The middle area of ​​land cultivation is 2.5 sq. km;
• weight. 43 kg;
• the area of ​​capture of the blades is 545 mm;
• bevel height. 523 mm;
• emission of mowed grass. rear section;
• type of grass collector. fabric;
• the volume of the grass collector. 45 liters;
• Type of wheel drive. present;
• The number of wheels is 3;
• Mulching. present;
• warranty period. 1 year;
• the number of cylinders. 3;
• type of motor. four.stroke piston.

This lawn mower was created to process large areas and to combat high grass. To do this, the design has a lawn rink, which will compact the grass before mowing, thereby increasing the efficiency of the blades. The grass itself enters the rear grass collector. The device is equipped with only three large wheels, but due to their size the stability of the machine does not suffer at all, and moving connections between them help to overcome any irregularities.

Despite large dimensions, MB 640T is easily versed, the assembly will take no more than 5 minutes.

Electrics

• country manufacturer. Switzerland;
• type of power. an electric motor;
• The middle area of ​​land cultivation is 600 kV. m;
• weight. 12 kg;
• the area of ​​capture of the blades is 356 mm;
• bevel height. 324 mm;
• emission of mowed grass. rear section;
• type of grass collector. fabric;
• the volume of the grass collector. 50 l;
• Type of wheel drive. front;
• The number of wheels is 4;
• Mulching is absent;
• warranty period –2 years;
• the number of cylinders. 3;
• type of motor. two.stroke piston.

How to make repair of the lawn mower with your own hands?

Those who have land are very familiar with what struggle is weed.

Especially when it often rains and the grass grows not by the day, but by the hour. Earlier, and sometimes even now, this issue was resolved with the help of a good old braid for grass.

But technologies are not standing still and now in this case, assistants such as electric and gasoline lawn mowers help.

The gasoline mower has several significant advantages over electric, such as mobility and lack of danger of electric shock. But there are many drawbacks, for example: high price, a lot of noise, expensive fuel and significant weight.

Electric mowers are cheaper, easier, work on inexpensive energy, and are not difficult to maintain and repair. These advantages become the main reason for their great popularity among buyers of this type of technique.

But despite the pretty good quality, improper operation and a lot of load, they can disable the device. In such cases, you should not immediately carry the device to the repair shop, but try to find and eliminate the cause of the breakdown yourself. over, as mentioned above, electric lawnmands do not have as many nodes and details as gasoline.

The main thing is to have some tools and faith in yourself. In this article, I will just show you how I did my own repair.

AL-KO, the lawn mower of the company, has serious problems in work, namely: the engine stop without load and its strong overheating, was taken as an example. The motor stops, buzzes and start it again, only re.pressing the “Start” button helps. The button has to restart almost every 30 seconds, and with further work and more often.

Of course, you can work, but it is very annoying and gives the feeling that somewhere the problem is. Therefore, I wanted to figure out where?

After the mower was working within an hour, the engine temperature was measured. It was impossible to touch him with a finger. He directly radiated heat. If you continue to pay attention and continue to work on such a mower, an electric motor will inevitably fail.

It is necessary to determine the cause of the motor overheating. To do this, remove the top cover of the case, under which the engine is located and its power chains.

The lid is held on six screws with a hat under a cross screwdriver.

Unscrew these screws and remove the lid. upward.

Having removed it, you can see the impeller, the capacitor, two connectors and the engine itself.

At first glance, no special problems are invisible. The engine winding darkened slightly from the temperature, but so far it is not critical.

To more carefully inspect the capacitor, it is necessary to unscrew the mount and pull it out.

The capacitor of some external damage did not show.

To check it, you need to disconnect the capacitor and feed the engine for a short time. If he did not start and began to buzz, then the capacitor is intact, because the engine was launched with him. Disconnect the power and connect the container connector back to the engine circuit.

Next, try to twist the impeller. It is mounted on the axis of the rotor and rotates rather tight.

And the reason for such severe rotation is a mechanical brake, which for safety stops the engine rotation when the power is turned off.

It looks like a sleeve that moves freely from top to bottom, along the rotor axis.

Когда напряжение на двигатель не подано, эта втулка прижимается верхней частью о крышку, на которой приклеено две резиновые полосы. Thus, the knife is inhibited on the rotor shaft.

When feeding, the brake sleeve under the influence of the magnetic field is drawn to the center of the rotor and provides free move.

With a careful examination, this sleeve with the brake noticed that at the time of turning on the engine, the brake is retracted and gives the shaft free rotation, but after 2-3 seconds it is released again and begins to slow down the motor. This should not be. Hence the stop of the knife during operation and overheating of the engine.

To find out what is the reason for this work, you need to remove and disassemble the engine.

To do this, disconnect the connectors and put the device on the side to get to the clamping screws. Access to them closes a knife with mounting elements.

To remove it, first you need to unscrew the knife bolt (cm. Figure below).

Direction of rotation, like a regular bolt, and not with left thread. That is, unscrew it counterclockwise, and tighten the clock.

The head of the bolt is plastic, so using the key, it must be well planted so as not to “lick” the edge.

After extracting the bolt, the knife and its plastic disk are removed.

Under it is a height sleeve. With its help, you can slightly lower the knife.

Adjustment is carried out by the washers put under the sleeve (see. drawings below).

We remove everything, only the engine shaft and the hexagonal screws of its fasteners remain.

The key for these bolts has a distance between faces of 6 mm. Unscrew them counterclockwise. Removing the last screw, with one hand, hold the engine.

Next, put the mower on the wheels, and clasping the engine with our hands. we raise it.

To disassemble the motor, you need to free tightening studs. We unscrew them all.

Remove the impeller with two screwdrivers.

We proceed to the removal of the back cover. A wooden block and a hammer will help this.

But first you need to mark the position of the covers with something sharp to the engine body.

Put the engine on the side and hit with a hammer, through a wooden gasket, on the rear shaft.

The motor at that moment should hold another person.

We hit until the axis comes out of the bearing to the end.

The cost of repairing lawn mowers Viking

The final cost of the necessary repair of Viking lawn mowers largely depends on the for spare parts and is agreed with the customer by phone, after the diagnostician conducted by the master.

In our service center, you can order \ purchase spare parts and accessories for Viking lawn mowers. We work as a pre-distribution of spare parts. The most common positions are always in our warehouse! We order unique spare parts and accessories directly from the manufacturers without margins, the delivery time of their delivery varies in the range from 5 to 30 working days.

The presence, completeness and cost of the necessary spare parts can be clarified without problems by calling us by phone or leaving a request for spare parts on the site.

Repair of the Viking lawn mower

Our price is compiled on the basis of average market prices, because we buy spare parts directly from manufacturers.

Repair for 1 day

Even if after diagnosis you decide to postpone the repair or abandon it at all, in any case, the service will be provided free of charge!

Free departure of the master

The specialist will arrive for a call within 40 minutes, after applying for an application. The exit will be free, even if you refuse repairs!

Why is the lawn mower out of order

Repair of Viking lawn mowers is better to trust professionals. To eliminate malfunctions, knowledge, experience and appropriate equipment are needed. Self.repair of the engine of the lawn mower can lead to serious breakdowns, which will significantly increase the cost of service.

• The equipment is stored in violation of the conditions recommended by the manufacturer;
• Sudden voltage drops;
• Untimely oil replacement;
• Use of low.quality fuel;
• Installation of incompatible cutting tools;
• Mechanical damage;
• Incorrect valve adjustment.

Our masters will carry out professional repair of Viking gasoline lawn mower, eliminate any problems in the operation of equipment.

Advantages of contacting our service center

We are professionals with 10-year work experience that will repair electric lawn mower and gasoline models on the day of circulation, set up equipment for the optimal operating mode. Up to 80% of malfunctions is eliminated on the day of circulation or repair is carried out at the expense of the service center. We have our own warehouse with an assortment of original spare parts and duplicates, so customers independently choose which parts to install.

Starter repair: disassembly

Unscrew the screw with which the pulley is attached to the starter cover. We take out the antennae, spring. We pull the pulley itself carefully so that the spring does not bounce into the face. Even with the most neat disassembly, it usually immediately flies out of the coil and sharply turns into a long metal strip or twisted by rings.

Gently pull out the white.tolerator’s white coil. do not be wounded up by the spring!

If the spring burst or one of its hooks-stalks has broken, then it will not work out to repair the starter and quickly-it is necessary to replace the spring. In order not to spend money on the purchase of a new starter, you can look for only her on sale.

In case the starter spring simply fell off, t. e. One of the hooks came out of the hook, it is enough to insert it, if necessary, slightly tightening the hooks more tightly (just do not break off!) Install the spring with an external hook in the groove of the pulley and begin to twist it, while holding your fingers inside the coil and preventing it from jumping out of there.

Clutching the spring to the pulley, roll the spring in circular motion

It may not seem so easy to insert the starter spring from the first time, but everything comes with experience. Having trained a little, you can easily wrap the spring into the pulley in a maximum of a minute.

The winding of the starter spring is made. It remains only to assemble the starter and take the spring to the desired value

How to assemble a starter?

The most important thing in the process of independent repair of the starter is to collect it correctly.

After the spring is completely wound, you need to carefully turn the coil and insert into the starter case so that the second spring hook enters the groove of the case.

By installing the pulley (in this photo. black), look through the hole in it so that the spring hook gets into the groove on the starter cover

Then, if there is a spring under the screw, we install it first, not forgetting to put the washers from below and from above the spring.

Gently insert a cup with antennae into the grooves of the coil and tighten the screw.

Then keep sure that the puck is on the sprout does not fall. Why is it important? The fact is that the spring scratches a plastic cup with its end, as a result of which the latter wear out and begins to tightly pressed with a screw to the reel. For this reason, a situation may arise, very similar to the breakdown of the spring: the handle stretches out of the starter, but does not return back. However, when the starter is weakened, this problem disappears. It is easy to eliminate such a starter malfunction: it is enough to choose a spring of the same diameter, but a little longer, or put an additional washer. If we simply slightly tighten the screw, then it will be twisted and fly out, and this will increase the likelihood of a spring breakdown, since the pulley will not fit tightly with the starter case.

The coil to the body was screwed, now we need to pull the spring. Before this, it is necessary to remove the starter’s handle from the rope in advance. If the knot is too durable, then you can just cut it or try to untie it, for example, using a pair of pliers. This is done so that after you bring the spring, you can pass the rope into the opening of the starter cover. The second end of the rope should be fixed in the coil even before it is installed in the case, it is not required to be roped on the pulley before pulling the spring. you will do it after.

Before taking a spring, estimate how much the reel revolutions should be wrapped in a rope. Suppose the length of the rope at the starter of the Motor ADA Grounddrill-5 corresponds to 5.5 revolutions around the coil. In this case, we make at least 6 revolutions of the coil in the direction opposite to the direction of wiring.

So, let’s get down. Without wrapping, insert the rope into a groove specially designed for it in a coil. Everything is ready, proceed to pulling the spring. To do this, we rotate the coil counterclockwise. in the direction opposite the direction of rotation of the coil when watching the rope. It is more convenient to do this not on the knee, but pressing the starter with one hand to the floor, and the second turning the coil right behind the rope mounted in it. If the experience is not enough, then you can rotate with both hands directly the pulley itself, but the rope will interfere with it, which can create additional inconvenience. After the required number of revolutions is made, we spread the end of the rope through the hole in the starter cover, put on the handle, fix it with a knot. It is more convenient to do this together with a partner, so that the end of the cable does not hit the end of the starter by chance.

By the way, on your own, you can introduce some refinement to the design of the starter in order to more reliably fix the end of the spring inside the coil. There is enough fantasy here. Now I will explain what it happens for. It often happens that the spring in starters of this type after the first such independent repair and installation of the starter on the unit flies after a few jerks again. there is no hook in the groove of the coil. And this despite the fact that the coil is almost tightly adjacent to the starter cover and the spring there, well, should not even hang up and down freely, and even more so until the spring out of the gear. It turns out that when the cable is jerking, it pulls the spring, pulls out of the groove. In this case, you can make the following: cut a narrow strip of metal, which in thickness could squeeze closely into the groove of the coil with the hook itself. So the hook will not hang free in the groove, which means that it will not be so easy to break out.

A metal plate, tightly inserted into the gap between the hook of the spring and the walls of the groove, will reliably hold the spring

Another solution to the problem: drill small holes in the coil on both sides of the groove and, inserting the spring hook, fix it with a thin wire covered through these holes. But here you need to manage to make sure that this wire does not touch when rotating the starter cover from the inside and does not slow down the pulley. As an option. tightly tighten the screw or replace it with a similar slightly larger length. You can think over the option with installing some gasket between the lid and the coil.

The design of the starter of your benzo tool is different from the above? Faced with another malfunction or you know the best way to repair the starter with your own hands? Ask questions, share your experience with others. joint efforts, we can solve the problem of frequent breakdowns of the starter once and for all!