Tackle The Line In The Homelite Trimmer

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that you can use this technique in places where a regular lawn mower will simply not be able to get because of its massiveness. It is necessary to understand in more detail what kind of trimmers are, and how to choose the best option for a particular summer cottage.

What is a trimmer?

The basis of this equipment is the following elements:

• An engine whose main function is the rotation of the cutting head at the end of the rod;
• Directly the head, consisting of a coil on which either a fishing line or a knife can be wound;
• Knives or fishing line rotating at high speed, which are the main cutting part of the device, about how to charge the fishing line into the trimmer, we will go a little further.

An electric apparatus is inferior in power to a gasoline one, so it is ideal for working on a standard plot of land that adjoins a house with an electric energy source. The main positive aspects of this technique are the absence of noise during operation, light weight, ease of operation and, of course, environmental friendliness.

As for gas trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electric energy at all, which has a positive effect on the functionality of such an apparatus. The cutting nozzles can be changed while working with the most diverse weeds of their type.

One of the most common attachments is fishing line, so you should dwell on this element in more detail.

Types of fishing line for trimmers

As a rule, the separation of fishing line is based on a different diameter of the samples, which can vary from 1.2 to 4 mm. The most commonly used material is with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

Here there is one main rule: the more power the device has, the thicker the fishing line should be.

This element can also differ in the type of its section. So, it can have a round (suitable for cutting simple grass) or square (for mowing a soft green cover) shape, sharp edges (tall grass) or it can be equipped with notches that are ideal for thin-diameter grass.

Do not forget that with the help of a fishing line it is allowed to mow exclusively grass, and for other, rougher vegetation, knives must be used.

Next, you should consider in more detail the process of how to insert the fishing line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How to fill the line in the trimmer?

Any machine for mowing vegetation is necessarily equipped with a coil, which, in turn, may already differ for different models with a filing system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to fill the fishing line into the trimmer, it is necessary to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted in a place specially designed for this, and then, using the visual tips on the reel that indicate the direction, the cutting device should be wound. At the end of all work, the cover, of course, will need to be tightened.

Fishing line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine turned off and the plug of the device disconnected from the network.

Perhaps these tips will tell you how to fill the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the type of cutting material necessary for the type and, of course, determine the category of the most used trimmer.

Many summer residents use a trimmer, a scythe with an electric or gasoline engine, to control weeds. It is convenient when working in places inaccessible to the lawn mower: at fences, flower beds, houses, in the garden on narrow aisles, and can cut small branches. The main element of this wonderful technique is an ordinary fishing line wound on a reel. The device is simple, but the cutting part wears out quickly, requires replacement. And the question of how to fill the line in the trimmer worries many owners of cottages.

Briefly about the fishing line

Depending on the models of the tool, the thickness of the fishing line is 1.2-4 mm. There are such configurations:

• Round. The most durable;
• Curly. For soft grass;
• Twisted or notched. For thin grass;
• Professional, not suitable for all instrument models.

When replacing the cutting thread, you need to choose the one that suits your type of trimmer. Preference should be given to specialized. Before filling the fishing line into the trimmer coil, it is better to soak it for half an hour in water. Then it will become more elastic and stronger.

How to quickly remove a coil from a tool

Before the thread is wound on a bobbin, it must be removed. Over, the removal methods depend on the features of the tool. On trimmers with a motor near the ground, the spool has two side buttons, when pressed, a part of the housing is separated along with a thread winder.

On instruments with a bent rod, the lamb on the fixture is moved counterclockwise; having disconnected it, they remove both the bobbin and the spring inside it. On trimmers with a straight bar, fix it with a screwdriver, rotate clockwise and remove. Then the device is disassembled either using latches, or by moving its parts in different directions. The spring is taken out of the coil.

Refueling the fishing line with a trimmer

The main question is how to wrap the fishing line on the trimmer coil, fixing it securely there?

In the case of a device with one antennae, unwind up to four meters of fishing line, insert into the hole inside it, fixing the fishing line, one end of it and move in the direction indicated by the arrow. The edge of the thread is fixed in the groove inside the bobbin so that when it is assembled, it does not unwind. If there is no groove, then this free end is fixed with a finger. Then the coil is assembled.

How to refill the trimmer coil if it has two antennae? In this case, check how many grooves are on it. One or two. In the first case, both antennae are sent to the common groove, if there are two of them, then each of them. In its own. 2-4 meters of thread are passed through the hole so that the free edges of the thread are the same length, and twist the bobbin in the direction of the arrow. The ends of the thread are inserted into the grooves or held with a finger, assemble the device and attach to the trimmer.

In a spool with two grooves, the same piece of thread is folded in the form of a loop, sent to the groove between them and the ends are wound simultaneously. Then repeat the previous assembly. With semi-automatic winding, the bobbins act as follows. The fishing line is passed through the hole inside, its ends are fixed in the holes on the body, collect it and press the button. In this case, the thread is easily wound in the right direction.

It is important to remember that the cutting surface must be protected from solid objects so that it does not wear out. Otherwise, it will be necessary to constantly stop and, having removed the bobbin, replace the spent fishing line. Let your work be not tiring and bring joy!

Watch the: How to lock a fishing line into a trimmer

To ensure that the area near the house always looks neat and tidy, you need to cut it regularly. Fortunately, modern technology allows us to solve this problem without excessive physical effort. Electric trimmers are so easy to control and care that even a teenager can mow the grass with their help. The main thing is to figure out first how to refill the fishing line in the trimmer.

How to charge a fishing line into a trimmer?

So, we are faced with the task of properly charging the fishing line into the trimmer. Let’s understand in more detail where to start its implementation and what pitfalls can await us in the process.

Step 1. Choose a fishing line

Step 2. Remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the network and turned upside down with the working head. The further course of action depends on the trimmer model and the design of the coil itself:

• For small trimmers with a lower engine arrangement, press the keys located on the sides of the coil and remove its upper part from the head;
• On trimmers with a bent rod, hold the coil housing with one hand, while simultaneously turning the lamb on the housing;
• For trimmers with a direct boom and gearbox, insert a screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.

Step 3. Disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mowed plot, since there may be a spring inside the coil, which will be difficult to find in tall grass. After disassembly, we will have three parts on hand: a body (top cover), a protective casing and the coil itself.

Step 4. Measure the required amount of fishing line

Novice mowers are usually interested in how many meters of fishing line to wind onto the trimmer reel? There are two ways to resolve this issue:

1. Unwind a skein of fishing line on a flat, dry place and separate half from it.
2. Measure 3-4 meters of fishing line from the skein.

In any case, after the end of the winding, the turns of the fishing line should be on the body of the reel without sliding off it. No need to try to wind as much as possible, since the fishing line will be badly unwound and more often torn.

Step 5. Reel the line onto the reel

How to install the fishing line on the trimmer depends on the design of the coil. Consider the option when in the coil body there is one outlet under the fishing line. In this case, the end of the fishing line is clamped in the crevice of the reel, and then we wind the fishing line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After winding up on the reel, it is necessary to put on a protective casing and bring the end of the fishing line into it

If the reel is designed to work with two tails, then the fishing line must be folded in half and laid in a groove in the central part of the reel. Further winding will be carried out in one or two grooves, depending on the design of the coil. The winding direction should also be opposite to the direction of rotation of the coil. At the end of the ponytails, the fishing line will also need to be pulled into the holes on the top of the reel.