Trimmer for Oleo-Mac grass stalls at high speeds. Motokosa carburetor adjustment

Oleo-Mac Sparta 37 problems are not gaining momentum! Video

To determine everything in order you need a tachometer. Repair of the gasopyle of the gasopyle of the OLEO-MAC gas station Carburetor adjustment. The revolutions should be the same as the maximum chainsaws in the passport are indicated. In general, the essence of the problem of the Oleo-Mac Sparta 37 is that after cleaning the silencer, the braid braid stopped gaining momentum.

Adjustment of the carburetor of the lawn mower or motorcycles with your own hands. How to configure a gasoline trimmer for grass 55, 250, 45 and other Kosa-Motors models adjusting the German manufacturer’s carburetor, the introduction of a lawn mower in work with landscaping involves the presence of wear, and sometimes breakdowns of its devices.

Oleo-Mac Sparta.The reason for the overflow of fuel and the lack of idle.

There are no oil crankcase in 2-stroke engines, because you need to add motor oil for 2-tact engine to add to gasoline (OLEO-MAC proprietary oil in a ratio of 1:50 or at least some other motor oil-1:40). CMI chainsaws, carburetor adjustment repair of the gasopyle of the OLEO-MAC 941C chainsaw. This is necessary to lubricate the motor in order to avoid unnecessary friction and the formation of soot on the nodular elements of the motor. Tachometer for adjusting the carburetor another reason for fuel overflow.We eliminate the cause of the fuel overflow on the Oleo-Mac Sparta 25, 250.

Correct tuning of the carburetor with your own hands in this case-combustion of the fuel mixture without a residue, the color of the candle should be light brown. How to adjust the carburetor if it is incorrectly configured and also depending on the load. This is not about the repair of the carburetor, but about the adjustment.

The Oleo-Mac Sparta 250s lawn mower is not started

The overall adjustment of the maximum revolutions, engine power, temperature and gas consumption depends on the left screw (H). Spare parts for Motokos OLEO-MAC Lawn mowing Oleo-Mac Sparta 250s carburetor repair.

Adjustment of the lawn mower carburetor can be adjusted with your own hands, as well as the entire bench tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others there is an option and it is necessary. For example, adjusting the carburetor of the lawn mower on their own. it is 5 minutes. In general, the essence of the problem of the Oleo-Mac Sparta 37 is that after cleaning the silencer, the braid braid stopped gaining momentum.

Oleo-Mac Sparta 44 Examination adjustment

Simply put, adjusting the carburetor on a benzocos. creating an optimal fuel mixture due to the correct air supply. This happens when, instead of normal repair, the “symptoms” are muffled by setting a carburetor.

Adjustment of the lawn mower carburetor can be adjusted with your own hands, like the entire benzo tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others you can and necessary. For example, adjusting the carburetor of the lawn mower with your own hands. it is 5 minutes. Spare parts for motorcycle. Repair and adjustment of the carburetor motorcosa.

Ways to eliminate problems

The first three reasons are quite simple to eliminate. If the matter is the mixture, it is necessary to pour old fuel from the tank, prepare a new emulsion from high.quality gasoline and engine oil (if your motor requires a mixture) and pour it into a fuel tank. If a trimmer for grass works on clean gasoline, it’s still easier.

In the second case, it is necessary to carefully release the details of the trimmer for grass from the wound grass.

If the filter is clogged, you can try to rinse it. If this procedure has not brought the effect, replace it with a new.

The last reason why the lawn mower does not work properly will require you a little more knowledge and skills.

In order to properly adjust the carburetor of the lawn mower, it is necessary to observe a certain procedure. First of all, carefully clean the air filter. The easiest way to rinse it (it is advisable to carry out the filter with water regularly after 9-10 hours of operation).

After that, in the diagram of your trimmer for grass, which is in the instructions for the operation of the device, find the adjustment screws. Usually there are three of them: the first is responsible for the supply of fuel, the second. for idle, but the third is designed to limit the number of maximum engine speeds.

Next, you should turn on the unit and wait for the engine to warm up.

Slowly twist the first adjusting screw (fuel mixture). Catch the moment when the motor begins to stall, and turn the screw in the opposite direction 45 degrees. If you did not have time and the motor stalled, the screw should be turned 90 degrees. Open the throttle and see how the speed is going. Next, you should slowly unscrew the screw (each turn. the same 45 degrees) until the moment when, with full gas, the motor begins to firmly issue maximum revolutions.

The second screw, as mentioned above, controls the engine speed at idle. Weakening it, you reduce the number of revolutions, tighten. increase. The screw must be adjusted so as to ensure confident operation of the motor at small speeds. Accelerate the engine for better starting a little. At the same time, make sure that before the movement of the knives/coil with the fishing line, the motor makes several dozen revolutions. With poor starting the engine, screw the screw slightly.

After you have adjusted the first two screws, test the operation of the device at the maximum engine speed. If necessary, you can limit it (maximum). this will serve as protecting the motor from “boiling”. To do this, you need to do the third screw. Unscrew the fixation nut until the moment when the control screw can be calmly turned. To increase the maximum speed, the screw must be loosened to reduce. on the contrary, tighten. Fix the screw position with a nut. Test the work of the motor again.

Spend the position of the screws regularly. a high level of vibration characteristic of benzocoses can cause their involuntary shift.

Remember that carburetor adjustment is not the final procedure. During operation, Motokos, most likely, you will have to mess with it more than once, because an unbalanced carburetor is both an increased fuel consumption and a quick failure of the candles, not to mention reducing the power and productivity of the device.

Little tricks

What to do if the gasoline trimmer for the grass does not gain momentum, you will learn later.

Ways to eliminate breakdowns

The following works are possible by carburetor:

• cleaning and adjustment of the fuel supply valve;
• similar work with a valve producing spent gases and pairs (after fuel burning);
• replacement of the spring weaker on the entrance valve;
• restoration of the tension of the carburetor cable;
• replacement of the fuel leaks hose, verification and strengthening of a weakened connection;
• changing the rotor damper disk;.
• Change of faulty wire or ignition coil.

The list of work on the work may also include the cleaning of the nozzles (in a 4-stroke engine), replacement of the valve washer, gaskets in tanks and so on.

Operating advice

It is worth paying attention to several recommendations for working with a benzoca or a trimmer, extending the service life of the device to several times.

• As soon as you notice that the lawn mower or trimmer vibrates for the grass. immediately stop working and check the serviceability, performance of specific parts.
• Valves adjustment and checking the work of pistons and cylinders, cleaning and changing the nozzles perform, starting from the requirements set forth in the user guide and the recommendations of the masters of service centers.
• When air bubbles enter the system due to impaired fuel hose-give in to gas. With the combustion of gasoline with higher speeds of the gas bubbles motor will be less. But this is a temporary measure. As soon as possible, disassemble the unit and eliminate the cause of the suction of excess air.
• Do not work as a unit in cold weather, not heating the engine. under load it can often stall. The effect here is the same as in the case when the driver in.40 started the car and immediately drove off, without waiting for the engine heating.
• Do not leave the unit on the roadway. During the accident, the hit will immediately break, and this will make the purchase of a new unit for a forced measure. A car that has crashed into it at best will receive damage to the body and bumper.
• Avoid working with a motorcycle or a trimmer in a downpour. Water getting along with air in the worst case can lead to engine explosion. Similar situations arose with cars.
• Do not use unverified vehicles and lubricants. The mower warms up the engine more than it would do the car itself. when overheating, it will automatically lose its lubricants. It will turn into a burned out reagent. sticky, too viscous and viscous, like fuel oil. He will immediately stall (and drown out) the motor.
• If the oil is old, previously merged from the tank of the machine or other (or the same) lawn mower (on a 4-stroke engine)-defend it, filter to clean from dirt and metal. But at the first opportunity, purchase fresh motor oil.
• If the engine is two.stroke. observe the ratio of gasoline and oil. For compositions with mineral oils, this is approximately 34: 1, for semi.synthetics. 42: 1, for purely synthetic. 50: 1. Do not violate these proportions: “rewinded” gasoline will not burn out and quickly clog the engine, “under.appropriate”. will accelerate the wear of its mobile parts.
• In terms of viscosity to winter classes, they include marking oils: SAE-0W/5W/10W/15W/20W/25W. To the summer-SAE-20/30/40/50/60. For example, SAE 10W-40 is already all-season oil (when working mowers from spring to autumn inclusive). Be sure to check with the manufacturer exactly what oil is needed.
• Always use high.quality gasoline that has passed the manufacturer all stages of cleaning.
• Recommended octane number of gasoline-AI-92/95/98. The use of the 76th can lead to a non-power of the engine by frequent stalling if you are poured, for example, the 76th or 80th gasoline.
• If you are not sure of the independent solution of problems with a gas station (which does not gain move and often stalls)- call the master or contact the service center for repairing motor and garden equipment. Specialists do not get used to doing this work for you.

Observing all these precautions, you will give your mower for many years of fruitful work, and yourself. the luxury of well.groomed lawns, comfort and convenience when mowing unnecessary vegetation in your site.

About the reasons why the lawn mower stall when you press gas, watch in the next video.

For what reason does an electric braid for STIHL grass do not develop full power

When using an electric trimmer for the grass, non.aviation problems may also occur. Here the reasons are completely different than that of fuel cos.

You can eliminate problems yourself

Eletric trimmer for grass does not develop the required power, because:

• The voltage in the network is below the required minimum for the device more than 10%;
• There was a failure on a smooth launch (if there is such a system);
• there was a malfunction of the brush node;
• The engine winding was burned;
• rotating parts sometimes jamming.

To establish voltage, you should first check its power. If it does not meet the norms, it should be increased using a stabilizer.

The repair of the smooth start system is carried out only in the service center.

note! With wear of brushes, you just need to replace them. When installing new ones, it is recommended to clean all the surfaces with which they contact

To establish voltage, you should first check the power.

When burning engine windings, you need to change the electric motor.

Jamming of parts of rotation can occur for various reasons. To eliminate them, you should review the entire drive unit.

Note! The last problem may also arise in another unit of this company. the STIHL prisoner, and the sharpening of the disk on the scissors will be its solution.

The knives are incorrectly adjusted

This can be seen on the uneven surface of the lawn. Before adjustment, it is necessary to turn off the lawn mower from the network and put on protective gloves.

The gap between the cylinder and knives should be uniform in all areas and not exceed the thickness of the office paper sheet. Even to regulate the gaps, the same paper is used. It is inserted between the cylinder and the knife, after which the drum rotates. It is necessary to adjust the knives until the paper is cut smoothly anywhere in the knife.

Let’s summarize

Having familiarized yourself with the information, we can conclude that with proper work with garden equipment and timely maintenance, most problems can be avoided. If the nuisance has nevertheless happened and the lawn mower does not work at full capacity, you can try to eliminate the breakdown on your own or contact the service center.

Why is the lawn mower stall at idle

Why does the lawn mower stall when you press the gas: the prerequisites and their solutions. The lawn mower stalls (trimmer for grass):. On idle

Users have repeatedly ask about stopping the braids for the grass “on hot”, that is, when the mechanism started, worked a little, and then took it. and stopped, stalled. The reasons for this situation are the following:

• problems with the carburetor damper;
• Gasoline in a carbe can even boil;
• If the ignition is damaged, then the trimmer for the grass will also heat up and stall.

In each of the situations, check the details for strength, and if they have already outlined their own, order new ones from specialists. We will call one of the most popular situations: the lawn mower stalls at idle. This happens for reasons:

• The carburetor was diluted himself, or was illiterately adjusted;
• the carburetor is contaminated;
• The air filter is very contaminated;
• The use of inappropriate fuel can cause a reduction in the gearbox revolutions;
• At idle, your trimmer for grass can stall if the throttle closed;
• Air fell into the carba system;
• The lawn mower receives a missing portion of gasoline to work fully, and therefore stalls.

We are sure that you received the maximum of useful information, and found a way out of your individual situation through our technical councils. Any spare parts, like a starter, motorcycles, its components and accessories are located at the lowest value in the country. Hurry up!

Recently, a gasoline trimmer for grass has acquired the status of one of the main tools in the arsenal of summer residents. And this is not surprising, because a motorized braid for grass allows you to quickly put a personal plot in order. However, sometimes it happens that the trimmer for the grass does not start hot and even on cold.

Often, when reducing the speed, the motor motorcycles stalls and does not support idle speed when re.starting. The main reasons for the occurrence of such a breakdown include pollution or the dumping of the carburetor, as well as clogging of the air filter.

In case of violation of the optimal settings of the carburetor, it is necessary to clean it and repeated adjustment. You can cope with clogging the air filter of a trimmer for grass by placing it for several hours in a solution with a conventional domestic detergent. If independent cleaning has not helped to cope with the blockage, it is better to purchase a new filter element in accordance with the operating manual.

After the measures, the user will not encounter a situation for a long time when a trimmer for grass stalls in idle and functions only when gas supplies.

A braid braid with a gasoline drive is a useful thing for owners of personal plots, lawns, and when a trimmer for grass suddenly stalls, the work on cleaning the territory stops from the grass. The device itself is a rather complex mechanism, so there are many different causes of its breakdowns.

At single speeds, the common reasons for stopping a trimmer for grass are as follows:

• reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel mixture;
• clogging of the throttle;

• air entering the system;
• not enough fuel for the operation of the lawn mower.

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

When to contact the workshop

If the device is under warranty, at the first signs of incorrect operation, it can be safely attributed to a specialized workshop. Repair will be made for free, regardless of the nature of the damage, if it happened not due to the fault of the owner. In case of breakdowns in the engine, an ignorant person in technology, it is better to immediately contact a specialist. In any case, the degree of seriousness of malfunctions with the unit is determined by the user himself.

Summarize. Both gasoline and electric trimmers for grass are designed for many years of reliable work. Most of the problems described above occurs due to the insufficient attention of the owner to his assistant. Subject to strict compliance with the requirements from the manufacturer and regular maintenance, the manual mower will work rhythmically and without interruptions.

Why is the lawn mower stall at idle

Why does the lawn mower stall when you press the gas: the prerequisites and their solutions. The lawn mower stalls (trimmer for grass):. On idle

Users have repeatedly ask about stopping the braids for the grass “on hot”, that is, when the mechanism started, worked a little, and then took it. and stopped, stalled. The reasons for this situation are the following:

• problems with the carburetor damper;
• Gasoline in a carbe can even boil;
• If the ignition is damaged, then the trimmer for the grass will also heat up and stall.

In each of the situations, check the details for strength, and if they have already outlined their own, order new ones from specialists. We will call one of the most popular situations: the lawn mower stalls at idle. This happens for reasons:

• The carburetor was diluted himself, or was illiterately adjusted;
• the carburetor is contaminated;
• The air filter is very contaminated;
• The use of inappropriate fuel can cause a reduction in the gearbox revolutions;
• At idle, your trimmer for grass can stall if the throttle closed;
• Air fell into the carba system;
• The lawn mower receives a missing portion of gasoline to work fully, and therefore stalls.

We are sure that you received the maximum of useful information, and found a way out of your individual situation through our technical councils. Any spare parts, like a starter, motorcycles, its components and accessories are located at the lowest value in the country. Hurry up!

Recently, a gasoline trimmer for grass has acquired the status of one of the main tools in the arsenal of summer residents. And this is not surprising, because a motorized braid for grass allows you to quickly put a personal plot in order. However, sometimes it happens that the trimmer for the grass does not start hot and even on cold.

Often, when reducing the speed, the motor motorcycles stalls and does not support idle speed when re.starting. The main reasons for the occurrence of such a breakdown include pollution or the dumping of the carburetor, as well as clogging of the air filter.

In case of violation of the optimal settings of the carburetor, it is necessary to clean it and repeated adjustment. You can cope with clogging the air filter of a trimmer for grass by placing it for several hours in a solution with a conventional domestic detergent. If independent cleaning has not helped to cope with the blockage, it is better to purchase a new filter element in accordance with the operating manual.

After the measures, the user will not encounter a situation for a long time when a trimmer for grass stalls in idle and functions only when gas supplies.

A braid braid with a gasoline drive is a useful thing for owners of personal plots, lawns, and when a trimmer for grass suddenly stalls, the work on cleaning the territory stops from the grass. The device itself is a rather complex mechanism, so there are many different causes of its breakdowns.

At single speeds, the common reasons for stopping a trimmer for grass are as follows:

• reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel mixture;
• clogging of the throttle;

• air entering the system;
• not enough fuel for the operation of the lawn mower.

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

What carburetors are used

Oleo-Mac chainsaws are installed gasoline membrane carburetors manufactured by WALBRO for two-stroke engines. They are distinguished by simplicity of design, maintainability, unpretentiousness in operation. Walbro enters the group of STIHL companies, therefore produces products that applies to the world standards.

Is it worth it to carry out independent repairs

Self-repair of the OLEO-MAC chainsaw carburetor is appropriate in subsequent cases:

• The breakdown is ordinary, trivial, there are the necessary details in stock;
• There is experience in doing similar work, qualifications;
• The warranty from the manufacturer does not disappear;
• There is no ability to contact a service center or it is financially unprofitable.

Read trimmer for echo grass adjustment of the carburetor video

Design and principle of operation

The mechanism of operation of the carburetor is based on mixing the fuel consistency of fuel and air oil in a certain proportion for effective ignition and their complete combustion in the internal combustion engine. It is a whole.liter case, the snuts of which are placed subsequent structural elements:

• Fuel chamber;
• Air and fuel channels;
• Junkers: idle and main;
• Fuel filter set
• Inlet and exhaust fuel valves;
• Air and throttle;
• Diffuser;
• Fuel and control membranes;
• Adjusting screws;
• Sealing gaskets.

The screws are displayed outside the housing to adjust the properties and composition of the consistency. In the upper and end part there is a pipe for supplying fuel and the pulse channel of the fuel pump.

The carburetor works according to the subsequent method:

• At the time of starting the engine, the air damper is opened. The air passes through the filter and bypassing the shutters (on the scheme number 1), the case falls inside.
• Fuel pump pumps gasoline into the chamber. Under pressure through the jackets (on the diagram above position 2. Chief Jickler, 3.4. Holocaulus jackpot) is sprayed with an oil-banzin mixture, contacts with air, mixed, and then enters the combustion chamber. The engine begins to work at idle.
• When you press the accelerator, the second adjustable throttle is opened to a certain angle (in the photo this is the 2nd damper), the fuel begins to be supplied through the main jacket (position 2 in the scheme). Snutri carburetor mixes a larger amount of combustible consistency, which, when serving in the combustion chamber, increases the frequency of rotation of the motor.
• The amount of gasoline entering the chamber also depends on the options of adjusting screws that control the needle.shaped valves (in the diagram it is a spring.loaded screw on the left and right).
• The fuel supply to the camera is limited to the membranes, the supply intensity is determined by the pressure configuration in the piston and is regulated through the revolution of the pump and the pulse valve. The operation of the fuel pump is synchronous with the engine: the higher the speed, the stronger the flow of the fuel-air consistency.
• To exclude overflow of fuel in the camera, a special lever and overlapping the valve is provided.

Fuel carburetor supply system. one. control chamber; 2. membrane; 3. Controversial needle.

Oleo-Mac 936 chainsaw. Parameters of a popular model

The standard equipment of this light household model includes a high-quality 1-cylinder engine equipped with an iron piston, 2 piston rings, a nickel cylinder with chrome-based internal walls.

For a languid cut, OLEO-MAC 936 chainsaws are equipped with a set of metal dust, Yaki withstands the highest friction and severe heating. The tire and circuit are lubricated with automatic oil pump. Has the simplicity of the device and the highest maintenance.

The functions for amateur Oleo-Mac saw in this configuration contain:

• The volume of the motor. 2.2 l. From.;
• Tank capacity for fuel oil / chain. 400/220 ml
• Recommended tire length for a suspended tire. 35 cm;
• The weight. 4.5 kg.

To increase security, the model is armed with instant continuous brake. This is caused by sharp blows and falls from heights.

Adjusting the carburetor of the Oleo Maxparte lawn mower

1st special service center “Agrotekervice” offers for you a profile repair of gasoline trimmers in the capital. There are experienced, certified and qualified mechanics that excellently perform any work in the field of maintenance and repair of garden equipment.

Before passing the gasoline trimmer for the grass, we ask you to report in advance to the company manager: the manufacturer’s title; The exact model of equipment (for example: the lawn mower mtd 790).

We repair gasosos, also the service of not branded stamps (repair of Chinese trimmers) of subsequent brands: MTD, Husqvarna, Caiman, EFCO, Champion, Bolens, Solo, Oleo-Mac, STIHL, ECHO, Honda, Partner, also repair of Chinese trimmers.

If you have not found your trimmer for gasoline grass, repairs that are needed in the list of served brands, contact the masters of the company and specify the possibility of repairs.

If you have questions for the repair of benzos and trimmers in other words, need the council, ours will quickly respond to all your request and offer.

We pay great attention to the level of our service to please the needs of all customers and offer you a service for transporting faulty equipment to our. and additionally from the service center back at the indicated time and place of both in the metropolitan region

• Exclusively in our car service, discounts of up to 20 % are provided for spare parts and up to 30 % for the repair of a trimmer for grass here!
• Due to the repair, the company’s service manager will present an invariable client for you.

• In case of invariable or repeated maintenance, customers of the office are provided with a cumulative system of discounts.
• Large families, participants and disabled people of the EVA provide for a system of special discounts. When repairing equipment, discounts on spare parts are provided!
• Special conditions and discounts to corporate clients!

The price of the services we provide you will like to be changed after the diagnosis of your technique. The company works personally with a full client, as the price calculation is made, respectively, with the level of difficulty of a certain type of work.

Reasons why the lawn mower does not develop momentum

There are five main reasons why the trimmer for STIHL grass does not develop turns:

Low quality fuel use

Benzotrimmer does not gain momentum in case of low quality fuel. He may stall or not start at all. To check the quality of the fuel, you need to inspect the candles. They are the main indicators for problems with the combustion chamber.

In the presence of sediment, plaque formed on the candles, the old fuel is drained and flooded another, high.quality.

It must be remembered that a trimmer for grass or a lawn mower should be refueling good quality gasoline and those fuel brands that the manufacturer indicated in the technical passport of the device.

Note! Candles should be thoroughly cleaned of plaque, and only after that place again in the combustion chamber of fuel.

Air or fuel filter pollution

There is a lawn mower does not gain speed, the reasons may be polluted by the filter element: air or fuel.

When blocking the air filter, there is a lack of oxygen in the combustion chamber, so the fuel is not fully produced, which prevents the desired speed and power.

To check if the cause is really in the air filter, you need to remove it and turn it on. If the lawn mower still does not gain momentum, the reasons are not in it. So you should check the fuel filter element. Everything is similar here, only gasoline acts as oxygen. If this filter is damaged, there will be a lack of fuel, which inhibits the development of revolutions.

In one and another case, the output is simple: you just need to replace the filter. If there is a spare, to install it, if not, to purchase in any specialized store, is inexpensive.

Problems with ignition candles

When a benzotrimer is used often, you need to monitor the state. This part is susceptible to wear, so we need to regularly inspect: if there is a fuck on them.

You can solve the problem in two ways: clean the old candle from Gary or purchase a new one.

In the first case, you need to unscrew and swing with sandpaper, dry. The distance between the electrodes should be 1 mm. Trimmer for grass is collected and advanced.

In the absence of a spark between the electrodes, it is worth inspecting the quality of the connections of all the elements of the circuit. If in this case everything is fine, then 100% you need to change the candles.

Replacing them is easy and inexpensive. From the tools will be needed a key, supervisor.

Important! With frequent appearance of soot on the candlelights, it is worth looking for a reason a little deeper. Candles should be carefully cleaned of plaque

Candles should be carefully cleaned of plaque

Problems with the engine

Engine problems. already more serious. There are several options for a malfunction:

In the case of the problem of the carburetor, you should first pay attention to the condition of the cable. It can be weakened, which led to a problem

A simple adjustment of the cable is required here.

If this did not help, then you need to check the use parameters. These operating standards can be found in the technical passport of the device. Sometimes it’s enough to disassemble the device: to wash and collect and assemble.

note! The solution to the problem with the carburetor may be the purchase of a new element or by contacting the service for professional services. The trimmer drive is subjected to a full check only if the manipulations with the carburetor were not given the proper result

The trimmer drive is subjected to a full check only if the manipulations with the carburetor were not given the proper result.

FLOOK DISCOUNSE

The lack of fuel circulation in the system can also be the reason why the device does not gain momentum. There are several options for why this is happening:

You can eliminate problems yourself. For this you need:

• remove blockages from the gasoline pump;
• update hoses, pipes for fuel circulation;
• Clean the muffler and mesh on it;
• Reinching a new catalyst.

Do not worry when such problems arise. This does not mean at all that the unit of poor quality. If the Patriot trimmer does not gain momentum, it can be repaired with your own hands without contacting the service.

Why stalls the chainsaw

If the chainsaws start and stall, the reasons can be different. An external inspection should be carried out before attempts to fix the tool.

If the saw stalled during operation, you should check the presence of a mixture of oil with gasoline in the tank. If the fuel mixture is over, the device will not work. In those situations where gasoline still remained, the quality of the tool should be evaluated until the moment of is turned off. The occurrence of extraneous sounds and the subsequent sharp stop should alert.

The formation of soot on electrodes can also cause difficulties in the operation of the tool. Carefully inspect the device, clean if necessary.

When pressing gas

In cases where the chainsaw stalls when you press the gas, you should check the silencer and the fuel filter. A possible cause of problem is a violation of the tightness of the fuel hoses. In some cases, the addition of revolutions helps.

Sometimes checking all the details does not give a result, the tool is suffocating, zooiling when gas is added. If the device stalls when a person presses gas, it is possible to supply fuel in insufficient amount for normal operation. This phenomenon occurs due to clogging of the carburetor or filter.

Damage can occur due to clogging with air filter dust. When you give gas, the device stops working. Do not eliminate the problem yourself, since each model has individual characteristics.

Calling may cause failure or lack of lubrication on the chain of the chainsaw. If the circuit is dry, the channels should be cleaned through which the oil is supplied to the device tire. If the oil proceeds, the presence of cracks, defects on the pipes is noted, you need to treat them with sealant.

Under load

In situations where the device stalls at load, the problem can be with a gas tank or filters. Check the quality of the fuel and change the filter.

Often the saw does not gain momentum due to the fact that the mixture flooded in the gas tank has a low octane number. There is not enough power, sufficient heating does not work, the chainsaw stalls under load.

Often, malfunctions of the component parts lead to the fact that the device stalls under load. You should check for the presence of a sucker hoses, seals, gaskets. If the details are faulty, you can try to fix them or replace them.

In cases where the chainsaw is started and immediately stalls, the fuel is not enough, the device does not heat up. Turn the device

It is important to use a suitable mixture. Different types of fuel are better suited for different models. It is necessary to familiarize yourself with the instructions, recommendations, reviews of people whose device works normally

It is necessary to familiarize yourself with the instructions, recommendations, reviews of people whose device works normally

It is necessary to familiarize yourself with the instructions, recommendations, reviews of people whose device works normally.

At idle

In those situations where the chainsaw stalls at idle speeds, it is necessary to examine the state of the muffler. If the part is polluted, the spent gases are poorly displayed, the engine cannot continue to work, stops.

The saw stalls idle and in cases where the carburetor is incorrectly configured. It is better for beginners to fix the repair to specialists, since there is a chance of incorrect setup, because of which the tool will not be able to work. Tachometer is required to adjust the carburetor.

At high speeds

If the device stalls at high speeds, pay attention to the state of gasoline and air filters, the serviceability of the fuel hoses

Polluted air filter can be washed under warm running water

It is important to thoroughly dry the part before installing it so that the water does not violate the serviceability of the tool

If the liquid stops flowing through the fuel hose, it clogged. You can clean the part or replace with a new.

In cases where the saw stalls at large speeds, but the liquid flows through the hose, and the air filter is clean and working, look for the cause of the breakdown in the fuel filter. Install a new one in its place or clean.

In some cases, the problem is hidden in a gasoline pump. With the wear of the component part, the fuel begins to flow through the walls. If this phenomenon is noted, a new pump should be installed.

When tilted

If the saw does not develop speed when tilted, turns off, stops working, you need to check the fuel level in the tank. If it is not too high, the device is not supplied in an inclined position is not supplied with a sufficient amount of fuel, since the fuel tube is above the mixture level.

DIY lawn

Many owners of gasoline lawn mowers sooner or later face technical problems of this technique. Most often, problems arise after three to four seasons of active operation of the lawn mower or after the equipment spends the winter in an unexplored garage. These problems are manifested as follows:

• The lawn mower will not start
• The lawn mower starts up, but soon stalls
• The engine of the lawn mower is working with interruptions
• The engine of the lawn mower does not work at full power

It doesn’t matter what engine is on your mower: dear Japanese Kawasaki or a simple Chinese Lifan, during the years of operation these problems are more likely to appear in all lawn mowers. However, do not be upset and rush to take your mower to the service center

In the vast majority of cases, the lawn mower can be easily repaired with your own hands. In this material, we will tell you step by step how to do it!