Trimmer huter get 600 line replacement

Huter GET-400

Warranty and service
official warranty in the branded service center

General information

The ergonomic and lightweight electric trimmer (electric trimmer) Huter GET-400 is very well suited in cases where it is necessary to cut young grass in a timely manner quite often in small areas, caring for a park, lawn, flower bed, etc. The device is perfectly adapted to work in the country or on the site of a country house. Small size, weight of only 3 kg and a convenient arrangement of all elements make it easy and accurate to handle the most difficult and inconvenient places where other similar tools may not fit.

The electric scythe is equipped with a fairly quiet, small in size, but high-speed (up to 10,000 rpm) environmentally friendly asynchronous electric motor with a power of 350 W and a cutting tool in the form of a reel with a special nylon line, 1.6 mm in diameter. For operation, the electric motor needs an electrical network with household parameters (single-phase, voltage 220 V and frequency 50 Hz). An element of ensuring the convenience and safety of operation is a special protective cover on the working tool.

For ease of manipulation and firm hold, the trimmer has two handles. The first one is longitudinal, in the back of the body, protected from below and has a start button. The second is transverse, having a D-shape. It can be fixed in any position and in almost any place on the body, where it will be convenient for the operator. The engine is located at the bottom, so its vibration is hardly felt by the operator.

The German company Huter, developing and creating the GET-400 trimmer, relied on modern technologies and materials. This allowed its engineers to create a tool that fully meets international standards for quality and safe use.

Device and principle of operation

The Huter GET-400 electric trimmer is a body elongated in the form of a rod, made of durable plastic that is not exposed to aggressive environments and ultraviolet radiation. In the center of the case there is a split joint, which allows the device to be disassembled into two halves, which facilitates its storage and transportation.

In its upper part, the body smoothly passes into the longitudinal handle. It has a bottom guard to protect the operator’s fingers. On the inner side, where the user’s fingers should lie, there is a spring-loaded power button for the electric drive. At the back of this handle there is an electric cable with a plug for connecting to the mains. On top of the body, using a special bracket with a manual clamp, a second handle is installed. a transverse one. It has a rounded closed shape and can be fixed in any position preferred for work. Both handles have a ribbed polymer coating for a comfortable grip that won’t slip even from a damp hand.

Towards the bottom, the body expands somewhat in diameter and has slots for air flow, moreover, these slots are made in such a way that, allowing air to pass through, they prevent the passage of cut grass particles. In this part of the body, the trimmer electric drive is located, namely, an asynchronous single-phase high-speed electric motor that develops a power of 0.35 kW. There is a plastic impeller on the motor shaft, which works on the principle of an axial fan and serves for forced air cooling of the motor windings.

A cutting tool is installed on the other side of the motor shaft. This is a closed plastic reel, from the body of which two symmetrical pieces of cutting nylon line, 1.6 mm in diameter, come out. In the process, the line may wear off or break. To restore the cutting qualities of the tool, there is some reserve in the spool. This stock can always be renewed.

On the lower edge of the body, at the level of rotation of the cutting line, a protective cover is fixed. It is designed to prevent possible injuries, as well as to prevent the wide spread of cut grass, stones or soil particles.

The cutting effect of the working part of the trimmer is based on a very fast (10,000 rpm!) Rotation of the reel with the line coming out of it around its axis. over, even a light line has a fairly significant kinetic energy. Given the small cross-section, this determines its high cutting performance.

Features and benefits of the Huter GET-400 trimmer

• The presence of a protective cover will prevent injury, as well as protect the operator from the ingress of soil particles, stones and cut grass.
• Comfortable handles, covered with a material that contributes to their firm grip, allow you to manipulate the device in any desired direction.
• Comfort during work is provided by the lower location of the electric drive. The user practically does not feel vibration.
• The electric motor does not emit harmful emissions into the atmosphere and runs quite quietly compared to gasoline counterparts.
• The cross handle is adjustable. It can be installed and secured in almost any convenient position.
• The electric trimmer is lightweight, comfortable and compact. Its body is split into two halves, which is convenient for transportation and storage.

Preparation for work

Before using it for its intended purpose, the Huter GET-400 electric trimmer must be assembled and carefully mounted on the working tool. This procedure does not require special skills and training, however, nevertheless, you must first familiarize yourself with the operating instructions included in the delivery.

The power of the trimmer drive is carried out from a conventional household single-phase AC power supply with a voltage of 220 V and a frequency of 50 Hz. For this, in the rear of the case, behind the longitudinal handle, there is a section of the power cord with a plug. This cord is quite short, which is convenient for transport and storage, but a proper extension cord is required for full connection.

Considering that a tool of this kind belongs to electrical appliances, and also taking into account the lower location of the electric drive, you should not operate the streamer immediately after (and even more so during) rain. Despite its light weight, size and modest power, this electric trimmer can cause unpleasant injuries. Therefore, before proceeding with its full-fledged operation, you should carefully read the safety instructions when working with such devices. These instructions can be found in the technical documentation.

The period during which the manufacturing company guarantees the impeccable performance of the Huter GET-400 electric trimmer, subject to the technical requirements, is 1 year.

The hook opens the spool of the HUTER trimmer

How to remove this trimmer coil? | Thread Starter

Tags: gasoline trimmer Huter ggt-1300t how to change hair on a spool

How to Change Line for a Huter 600 Trimmer

Hair replacement in the Huter trimmer MEHANIKABIZ.RU

March 22, 2018 How to change the trimmer line and how to choose the best. How to wind on a reel Now let’s talk about how to wind on a reel. Trimmer Huter Ggt 2500s Video I bought a HUTER GGT2500S petrol trimmer Hi everyone. Gasoline Trimmer Huter Ggt 1300t Video.

Huter get-600 Снятие головки (катушки)

The Huter GGT-1500S Power Trimmer occupies an intermediate position in the line of gasoline scooters. | Started by PKF

The Huter GGT-1500S Power Trimmer occupies an intermediate position in the line of gasoline scooters. The powerful 1500 W motor and bevel transmission enable you to cut thick and tall grass in large gardens, orchards and parks. Air cooling prevents overheating and prolongs engine life. Depending on the complexity of the terrain, the cutting technique is selected. three-dimensional head or knife with three blades.

With the GGT-1500S petrol trimmer, the boom is in two parts and can be easily assembled without tools. But if you do not need to transport the tool to the mowing position, you should pay attention to its twin brother with the rugged GGT-1500T rod. The position of the handle on the trimmer is adjustable in height for optimal balance. The shoulder strap strains your arms as much as possible. Thanks to the efficient anti-vibration system, long-term work can be done without unnecessary fatigue. Plastic housing protects the operator from throwing grass, branches and stones from under the cutting unit.

Features of Huter GGT-1500S Trimmer
Safe Operation Huter GGT-1500S Safe Operation
The protective cover prevents grass from falling on the operator. Convenient operation GGT-1500S Convenient operation
Translucent fuel tank. for easy tracking of fuel consumption. Convenient tool mounting Huter GGT-1500S Convenient tool mounting
Comfortable bicycle handle of the Huter GGT-1500S petrol trimmer. for uniform natural movement of the operator during work. Easy transportation Huter GGT-1500S Easy transportation
Since the rod is disassembled, the tool is easy to transport and store.
Huter GGT-1500S Advantages
The engine power is installed. 1.5 kW
Mow both young grass and dense growth.
Electronic ignition.
Vibration damping system.

How to choose a fishing line. length, diameter, restrictions

IMPORTANT TO REMEMBER! Do not use fishing line or metal cables for the trimmer. This replacement is ineffective and dangerous. The rope can injure not only the mower himself, but also those around him.

As for the length, you should rely on the estimated frequency of use of the trimmer. The more often, the more it costs to stock up expenses.

Information about the possible line diameter can be found on the body trimmer spools. Most likely, the range will be indicated there. The thickness varies from 1.2 to 4 mm. Choose the appropriate option, taking into account the characteristics of the cultivated area. The larger the diameter, the easier it is to mow tough grass.

Winding Algorithm

Insert the resulting loop into the groove.

Lay the line in the direction indicated on the element body.

Insert the short end into the slot on the side of the spool.

Secure the long end in the opposite groove.

Place the spool of coiled line into the spool body.

Pull the line out of the locking grooves.

Put on the cover and fix.

Trim the ends of the line, leaving 10 to 15 centimeters.

The replacement of the line is completed and now all that remains is to screw the bobbin onto the trimmer and you can work.

How to wind the line onto the trimmer spool

How to properly wind the line on the trimmer reel. Step-by-step guide VIDEO

Preparation. remove and disassemble the spool

On most electric and petrol trims, you will need to remove the spool to replace the line. The FUBAG tool lets you skip this step. To make the instruction universal, we will still consider it in detail:

Secure the shaft. Insert the locking element into the corresponding hole. It can be a thin screwdriver or a metal rod.

Unscrew the cover according to the direction indicated on the body.

Remove the coil for winding.

The preparatory stage has been passed. You can proceed to winding the fishing line.

ATTENTION! Typical line problems

No wonder they say: “Forewarned is forearmed“. Knowing about possible problems and the causes of their occurrence, you can prevent them in time. We recommend to remember or leave a memo.

Problem	Cause	Decision
Line break	Stones, branches and solid objects in the grass	Avoid collision
	Poor cord quality	Replace with a quality analogue
	Head outlet wear	Complete replacement of part required
The line is unwound	The spring in the coil is weakened	Check spring and replace if damaged
The line is sticking	Poor line quality, due to which it can melt under the influence of temperature from the heating head	Reel in less line or replace with a better line

For a better understanding of the mechanism of the process of changing the line in the spool with a video guide prepared by FUBAG specialists:

Model operating instructions

The above-described gasoline trimmer “Huter” must be used taking into account the safety rules that are prescribed in the instructions. From them you can learn that it is unacceptable to use the equipment for people who are under the influence of alcohol or are physically tired. Before starting work, it is necessary to arm yourself with special protective equipment, among them appropriate clothing, goggles, mittens or gloves, a helmet and headphones should be distinguished. The equipment should not be used near flammable and explosive substances. This also applies to conditions under which high humidity remains.

The cost of spare parts for a trimmer

Regardless of the quality of the tool, you may need spare parts for the Huter trimmer. Some of them will be discussed below. For example, a drum for clutching with a housing will cost the consumer 860 rubles, while the bolt for attaching the clutch housing costs only 5 rubles. A flexible shaft for a trimmer costs 600 rubles, but a container for preparing a fuel mixture will cost a symbolic amount. 50 rubles.

Reviews of the GET 1200SL electric trimmer

If you want to buy the Huter electric trimmer, then you can pay attention to the model that was mentioned in the subheading. Its cost is not so high and amounts to 5,000 rubles. The equipment, according to buyers, can be used for processing the lawn on the personal plot, as well as processing small areas. You can use the tool to cut grass even in hard-to-reach places such as along a fence or under benches.

The power of the unit is sufficient to perform tasks in everyday life and is 1.2 kW. The bar is collapsible, which, as buyers emphasize, simplifies not only storage, but also transportation. This example is ideal for women and the elderly, as the equipment is lightweight. weight is 4.5 kg.

Need a trimmer

A lawn is quite an attractive element of the site today. However, it will look good if you take good care of it. To do this, you should regularly water the area, feed it with fertilizers and cut the grass weekly. If you neglect the last condition, then rather quickly the territory will turn into dense thickets.

Reviews of the main features and advantages of the model

• vibration damping system;
• structural strength;
• long service life;
• the location of the controls on the handle;
• easy start.

The trimmer “Huter 1900″ has a fairly impressive power, which is 1.9 kW. A knife or fishing line is used as a cutting element. The tank capacity is 0.7L and the line thickness is 2mm. Before purchasing this equipment, you should take into account that its weight is quite impressive. This is stated by many novice users. Equipment weight is 7 kg.

Trimmer Repair: Carburetor Adjustment

The Huter trimmer repair can be done by you when you need to adjust the carburetor. But first, the equipment should be serviced, for this it is washed, as for the engine, and then the spark plugs are changed, eliminating minor defects. You will need to wash the foam filter element using warm soapy water. If the adjustment is carried out on a dirty filter, then after cleaning the fuel mixture will become leaner, which will lead to poor performance or engine damage. The next step is to install the trimmer head with the largest possible cord, its length should be standard.

The tool starts up, warms up for 10 minutes, and then the left and right needles are turned to the middle position and set between the twisted and off position. There will be three adjusting screws: bottom, left and right. The right one will regulate the richness of the mixture at low revs. It is important to find the maximum idle speed and turn the right screw. Then this screw is turned clockwise. The idle speed control is considered correct if the cold engine is idling and the hot engine is not too high. Huter trimmer carburetor is correctly set if the engine accelerates smoothly and quickly.

Electric trimmer HUTER GET 600 | Tolyatti

• Characteristics
• Description and video
• Testimonials

Engine
engine’s type	Electric
Voltage (V)	220
Engine power	600 watts
Rotation speed (rpm)	8000. 11000
Technical data
Engine location	Lower
Cutting tool	Fishing line (cord)
Working width (line)	32 cm
Line thickness	1.6 mm
Handle type	“D”.shaped
Rod type	Telescopic
Spare trimmer head	Not
Adjustable auxiliary handle	Not
Lawn edging wheel (stop)	Yes
Additional handle	Yes
Dimensions and weight
Weight	3.5 kg
Manufacturer and warranty
Manufacturer	Huter
Brand	Huter
Model	GET 600
Guarantee	1 year
Homeland of Brand	Germany
The country of manufacture	China

Electric trimmer HUTER GET-400. low-noise, lightweight tool with a modern design, designed for mowing grass in the local area and in the garden. Cutting element. fishing line. The telescopic arm provides a comfortable grip and easy guidance. The main handle has a soft pad for comfortable grip of the tool. The electric motor is located at the bottom.

Benefits:

• On / off switch handle for better tool grip as well as comfortable control of the electric trimmer
• The auxiliary handle securely fixes the tool during operation.
• The protective cover protects against small stones and small debris that can fly off during operation.
• Ventilation ducts in the motor housing help cool the motor.

For trimmers GET-600, line R1215 with a round section, diameter 1.2 mm, length 15 m is suitable. You can also purchase a ready-made set of a head with a line, which will simplify the replacement process, developed specifically for its trimmer model. For example, head with line ETH-600 for trimmer GET-600 SAF or head with line ETH-600 for trimmer GET-600 SPA.

You can purchase the HUTER GET 600 electric trimmer with delivery to the city of Togliatti. Delivery takes place with the help of transport companies and the Russian post.