Best Lawn Mower Lift – Buying Guide. Lift for lawn tractor

Best Lawn Mower Lift – Buying Guide

The biggest part of owning a lawn mower is the maintenance. One of the most frequent tasks is sharpening the blades. This is especially true for lawn care companies… many will sharpen blades on a daily basis.

Instead of going with a makeshift solution, it is good to go with the lawn mower lift. These are not only the safest option but the most convenient. If you are a homeowner that only sharpens blades once or twice a year, you may be able to get away with using a car jack.

If you go the car jack, it is very important that you set the parking brake and chock the back tires. It is probably a good idea to use jack stands as well. Either way, I would still recommend getting a mower lift.

Lawn Mower Lifts Overview

You may be new to lifting a lawn mower and not sure how to do it. Let me save you some time and possibly your life and say, if you’re going to be doing maintenance on your mower, I would recommend a mower jack immediately.

It will save you so much time and is just a much safer way of changing/sharpening your blades.

Below are the top lawn mower lifts on the market. I have personally used each of these and stand behind each of them. They all have slightly different features and price ranges that may fit your personal situation best.

Super Jack ProMoJack ProJungleJim LiftPro-Lift T-5305
Mower type Commercial mowers All mowers Commercial Mowers residential zero turns and riding mowers
Capacity 800 lbs 750 lbs 800 lbs 500 lbs
Lift Height 23 in. 28 in. 19 in. 26 in.
Wheelspan greater than 27″ 31.5 – 62.5 in any 19.25 – 42.50 in.

Disclaimer: We may earn a small commission from some of the links below. This does not, in any way, change the price you pay. It is simply a thank you to us and a way for us to “keep the lights on”. Thank you!

Jungle Jim Mower Lift

The Jungle Jim mower lift is primarily for commercial mowers. It can be used on about any mower, but because of its design and price, it is probably only going to be for lawn care companies.

The standard 2″ inch tooth means that it is compatible with most mowers. This makes it incredibly universal.

The USP of this lift is that it can lift the lawnmower by 19″ at the angle you want. Consequently, it becomes easier for you to work underneath it.

The weight lifting capacity of 800 lbs does not disappoint either. It has a foot-assist pedal. This lift design is very similar to the Super Jack Pro. It is a simple design that creates plenty of leverage to lift any mower with ease.

The safety ensures that you can quickly secure it. You will not have to worry about the Jack moving underneath it.

Overall, I would recommend this mower lift to any commercial cutter or lawn care company. It is easy to store, simple in design, and is very durable.


For the Jungle Jim mower lift, if you have a Toro mower or any other mower that has a longer/wider baffle, you will need to order the 3″ tooth upgrade for it to work. Don’t let this scare you away, though; this mower lift works with 90% of commercial mowers.

The advantage of this lawn mower lift is that it provides a clearance of 23 inches. Due to the same, maintaining the mower becomes easy.

Whether you want to clean under the deck, change the blades or service the machine, you can do all of that and more quite easily.

The lift is compatible with a zero turn, stand on, and walk behind lawn mower with a deck between 36 to 72 inches.

The lift comes with a pedal kicker. The pedal kicker makes it easy for you to lift it. Even though it is a simple design, it creates enough leverage to make lifting any size mower easy.

over, the grips offer another great advantage. They add a little more safety to ensure the lift doesn’t slip out of your hands while lifting it. The powder-coated design ensures that outdoor use is not going to be a problem.

You are free to choose between 2 different color options. The non-flat indestructible tires ensure that wear and tear is not going to be a problem.

The heavy-duty construction and easy-to-use design make it an excellent choice. I’ve personally used this mower lift and absolutely love it. I chose it to be first for its simplicity and quick accessibility.

Use code CMR10 at Ballard Inc. for 10% off your entire order


  • Compatible with most the lawnmowers
  • Powder-coated design
  • Available in 2 color options
  • 23-inch lift on offer
  • Weather-resistant
  • Nonslip grip
  • Easy to use

The MoJack Pro is arguably one of the best mower lifts on the market. It is the most universal mower jack that is capable of lifting riding mowers, zero turn mowers, stand on, and walk behind mowers. This lift works for almost any mower on the market.

This is very important to note that this mower lift is capable of lifting a tractor-style riding lawn mower. This makes it stand out from Super Jack Pro and Jungle Jim mower lifts. If you are a homeowner, you really can’t go wrong with this lift.

With a lifting capacity of 720 lbs, you cannot go wrong with this lawn mower lift. It is compatible with front-wheel measurements ranging from 31.5 inches to 62.5 inches.

It is a pretty well-designed mower lift. It seems to have a lot of stability. That comes with the cost of being simple and small. This lift is pretty bit and kind of gets in the way a lot.

Raising and lowering the lawnmower is not going to be a problem either. You can do so with a single hand. This mower lift features a hand crank similar to what is on a boat trailer. It is fairly easy to use; however it is much slower than some of the other mower lift options.

If you’re looking for a smaller variant, it is available in a weight lifting capacity of 300 lbs. Honestly, I would go with the large 720 lb capacity mower lift no matter which mower you have.


  • High load lifting capacity
  • Perfect for routine maintenance
  • Easy to use
  • It folds up for easy storage
  • Very safe design
  • It comes with the workbench attachment

The weight lifting capacity of this lift is 500 lbs. Due to the same, it can lift most of the mowers without breaking a sweat. I would not recommend this for the very large commercial mowers. Basically, it can handle a mower up to about 1000 lbs.

This would typically be a mower under the 7-8,000. Not always, but these mowers are all usually under the 1,000 lb mark.

This lift is built out of solid steel so it is still a fairly heavy-duty mower lift. I would recommend it for most homeowner applications.

It comes with dual locking safety latches. Once you put them in place, you will not have to worry about the mower moving around.

The 26-inch lifting height means that maintaining the lawnmower and changing the blades is not going to be an issue. The nonslip foot pedal ensures that you can lift the load quite quickly.

Whichever way you look at it, this lift does not disappoint. It isn’t quite as commercially built as the other mower lifts, but it is still a good mower lift at a great price.


Thus, if you’re looking for lawnmower lifts, these four options will not disappoint you. Before you buy one, however, take a look at the FAQ list below.

Buyer’s Guide

Mower lifts are essential for the regular maintenance of lawnmowers. They enable mower operators to simplify maintenance procedures for smooth-sailing mowing operations.

Like lawnmowers, lawnmower lifts also vary in design. Large industrial mowers require bigger lifts with sturdier frames, while smaller mowers for residential lawn use can use smaller, more portable lifts.

Before purchasing a mower lift, it’s best to know the essential features for optimum serviceability. Check them out here:

Weight Capacity

Varying lawnmowers weigh differently. As such, you should check the weight of your mower before purchasing a mower lift.

Each mower lift has a limited lifting capacity, which should correspond to, if not surpass, the weight of your mower.

However, most mower lifts only raise the front portion of a mower, meaning half its weight is still in the ground. If that is the case, your chosen mower lift’s weight capacity should equal half of your lawnmower’s weight.

It’s best to check your mower’s specifications so you can get the best accessories to service it.

Lift Type

Mower lifts come in several forms: pneumatic, hydraulic, and electrical. Weight capacity usually varies depending on the type of lift used.

Hydraulic lifts employ pressurized oil or liquid to move or raise heavy objects. They exert a force against the floor to make adjustments. Compared to the other types, hydraulic lifts produce higher lifting power.

On the other hand, pneumatic lifts use compressed air to generate lifting capacity. Compared to hydraulic and electric lifts, pneumatic lifts offer quick energy release from the high flow rate of compressed air. As a result, they tend to work faster than hydraulic and electric lifts.

Electric lifts are the weakest type of actuator. While they usually cannot produce the strength that pneumatic and hydraulic systems provide, they are the cleanest and most cost-effective lifts.

Lifting Height

You should also consider the lifting height limit of a mower lift before buying one. Typically, lifting height limits range from 19 inches and 28 inches.

Of course, the higher, the better. The height to which you can raise the front of your lawnmower dictates the amount of space you have to work under it.

Choose a mower lift that can raise the front of your mower to at least 22 inches for comfortable access to the mowing deck.

Wheel Span Compatibility

Most mower lifts have raising arms that latch on or grab the front tires of a lawnmower. Ensure that these arms are compatible with the wheel span of the mower that you already have.

The best way to do this is to choose a mower lift with adjustable lifting arms.

Safety Features

When working on the underside of a lawnmower, safety should be your utmost priority. Since you’ll have to crawl beneath some blades for a visual checkup, you better be sure the heavy machine stays up.

Ensure that a mower lift remains stable, especially when set up to carry a heavy weight. Look for safety locks, safety straps, and non-skid foot pads to prevent your mower from slipping.

Durability of Construction

Mower lift durability also has something to do with lifting capacity and overall safety. The strength of the material used in the design of a mower lift determines how heavy it can support and how long it can stay up.

Most mower lifts have a sturdy steel construction, but it wouldn’t hurt to check the different types of materials used to form a lift before buying one.

Ease of Maintenance

Like all garden tools, the mower lift is a device that requires regular maintenance.

The most common problems that hydraulic and pneumatic systems face are fluid leaks and mechanical issues. When choosing a mower lift that uses compressed fluid, look for one that comes with serviceability from the supplier.

On the other hand, problems with electric mower lifts are usually electric or mechanical in nature. Be sure to follow all maintenance requirements as instructed in the manual to reduce repair requirements.

How to Jack up a lawn mower

Want to know how to jack up your lawn tractor properly? Here we have included the procedure through steps. Simply follow the below steps to learn How to Jack up a Lawn Tractor accurately.

First, park your lawn tractor on a flat or level surface, and don’t forget to engage the lawn tractor’s parking brake. Then place bricks or wood blocks around the rear tires to prevent the lawn tractor from rolling.

When you want to raise the front side of the lawn tractor, place a floor jack under the center of the front axle. You can also palace the floor jack under the center of the drawbar frame on the rear of your lawn tractor. If your lawn tractor does not have a drawbar, you can place the floor jack in the center of the transaxle.

Tighten the handle on the jack on the floor clockwise and jack up and down the handle until the cut reaches the desired height.

If you lift the front side, place the jack stands under each axle. Or place the jack stands under the ends of the transaxle when you are raising the rear axle. over, try to use blocks, such as wood blocks under the wheels to support your lawn and reduce the risk of falling.

Slowly turn the floor jack handle counterclockwise to lower the tractor into the jack stand or wooden blocks. Now you are ready to perform your lawn tractor repair or maintenance as needed.

Safety Tips When Lifting a Lawn Mower

Knowing the steps to jack up your lawn tractor is not enough; you also need to consider some safety precautions. Here we have included some safety tips that you need to follow while setting jack and operating it.

  • Select the perfect lifting tool that can easily raise the lawn tractor. Then check the weight capacity of the jack and match the lifting capacity with your lawn tractor.
  • Inspect the wheel span capacity of the lifting tool. Because it is necessary to center the pads on the wheels completely. There may be a risk of the mower sliding if raised.
  • The riding mower may begin to roll during lifting. For protection, you can slide the wheels square or wooden blocks to the front and back of the tire.
  • Always check a couple of things before lifting the front side. You need to check where the spark plugs are, if towards the rear, it would be difficult to oil. Also, check the fuel tank and carb if there is a chance to leak fuel. over, you need to check if the battery is sealed or not.
  • Never use the car jack to raise your lawn tractor. That is because it will not provide the same lifting power and procedure.


How to lift a riding mower to change blades?

There really isn’t much difference between lifting a tractor-style riding mower and a zero turn mower. It is essentially the same process. Just make sure you always chock the tires no matter which lift you are using or which type of mower.

I would highly recommend using either the Mojack Pro (750 lb) or Pro-lift T-5305. If you have a riding mower or a small zero turn, you may want to get the MoJack Pro 300 lb capacity. It is much less expensive and perfect for those smaller riding lawn mowers.

Lifting the riding mower to change blades is easy. You have to place the lift such that the point of contact is near the center of the lift. That will allow you to maintain a proper center of gravity.

After that, you have to lift it manually until it reaches the height needed. Also, you can use a workbench or simply get underneath the mower to change the blades. It’s that simple!

How to lift a lawn mower?

The best way to lift the lawnmower is to use any of the lawnmower lifts above. Using any of the lifts above, you can easily mount the lawn mower on these lifts and move it up manually. Since you get control over the height, it is easy to access the lawnmower’s blades, wheels, and components.

Lawn Mower Steel Deck vs Aluminum

If you’re planning to replace your old, worn-out lawn mower, then you’re probably shopping with long-term value in mind. Of course, factors like the propulsion system at play, blade availability, and mulching options are important considerations, but there’s another often-overlooked factor: the material used to make your mower deck! These days, most mower decks are Read …

Best Commercial Lawn Mower Blades

There are only two things that can be used to characterize a good lawn mower, and these are its cutting ability and its motor power. The blade of a lawn mower ultimately determines the quality of cut you will have. Without a quality blade, it doesn’t really matter the design of the deck. One of Read …

Best Headphones for Lawn Care Workers

It’s not talked about as much as it should be, but maintaining proper ear protection is key when it comes to lawn care. With most of the equipment used producing noise at a level of over 95dB, the chance for permanent hearing damage is very high. Fortunately, with the proper PPE (Personal Protective Equipment), lawn Read …

How To Jack Up A Lawn Tractor Or Mower

Assuming you own a lawn tractor or mower, you know that regular maintenance is necessary to keep it functional and durable.

Occasionally, you may need to lever it up for servicing the tires, replacing old oil, and other routine maintenance. However, these machines are pretty heavy, and goof-ups while lifting them can lead to injury or damage to the machine itself.

best, lawn, mower, lift, buying

Apart from needing a robust hydraulic jack and jack stands, you also need prior knowledge of the procedure.

How To Jack Up A Riding Lawn Mower?

Here is a step-by-step illustrative guide on jacking up your riding mower. Some pieces of equipment you will need include:

Step 1

Drive and park your machine on a leveled, hard surface such as a driveway or garage. Ensure to engage the parking brake of the machine.

Before you engage the jack, slide wooden blocks underneath the front and back tires to prevent them from rolling.

If raising the front tires, place the woodblocks under the rear tires and vice versa.

Step 2

Though not entirely necessary, you can slide a large plywood board underneath the mower, positioning it at the center.

This helps provide a solid base for the jack, and the jack stands. Ensure the plywood covers the entire area underneath the mower from the front to the rear axle and stretches sideways.

Step 3

You now want to position the floor jack under the mower depending on which side you wish to raise. If raising the front of the mower, place the jack at the front axle center.

Repeat a similar action if raising the rear of the mower by placing the mower at the center of the drawbar frame.

Some lawn tractors lack the drawbar frame. Place the floor jack at the transaxle center should this be the case.

Step 4

Everything being in position, twist the jack handle clockwise and start pumping up and down to lift the lawn tractor to the desired height.

At this point, the tire should be spinning freely.

However, avoid lifting the machine too high to prevent frame damage. Use wood blocks or jack stands to provide additional support and prevent it from falling.

Step 5

After lifting the lawn tractor to the required height, turn the floor jack handle counterclockwise to allow the machine to rest on the woodblocks or jack stands.

Safety Precautions To Consider

Here are some safety tips to follow when operating a jack.

Mower Jack for Zero Turn and Lawn Tractors | MoJack Pro Review & Demo

  • The weight lifting capacity of the jack should be more than three-fourths the curb weight of your lawnmower. A lower-rated jack can slip and damage your machine.
  • Empty the fuel tank and carburetor to avoid leaks during lifting and disconnect the battery.
  • Disconnect the spark plug wires if changing the mower blade.
  • Ensure that your jack has a broad base. This ensures stability while lifting and prevents slip-ups.
  • Avoid using similar pieces of equipment such as a car jack. They lack the required lifting capacity for lawn tractors.

Wrap Up

Given their high purchase cost, you want to ensure that you properly jack up your lawnmowers or tractors to avoid causing damage. In addition, your safety is equally important.

Using the avoid guide will keep you and your machine safe while lifting it.

Job Kiniale is a certified crop scientist and gardening enthusiast with a passion to help beginning gardeners navigate their newfound hobby. Let’s talk about plants, backyard ideas, and general gardening advice. Outside work, Job loves spending time with family.

Lift lawn mower with pallet forks

Does anyone use pallet forks to lift a riding lawn mower to clean the deck and sharpen blades? If so what do you use as the lifting points or do you just lift one end and chock/block the wheels and set the lifted end on cinder blocks in case of a hydraulic failure? Yes, I’m a newbie. I don’t even own pallet forks yet.

3025E rc2060 frontier box blade titan pallet forks and landscape rake ken’s Grab Hook/Clevis Combo heavy hitch receiver hitch, ripper/subsoiler, toothbar, suitcase weights


It can be done but I don’t think it is worth the risk just to clean the deck and sharpen blades.

2012 2720.- 200CX Loader.- 54″ Quick Attach Snow Blower.- Frontier LR5060 Rake.- Land Pride RB1660 Blade (Hydraulic Angle).- Artillian 42″ Forks.- Ken’s Bolt on Grab Hooks.- Fit Rite Hydraulic top-link.- 2013 X500/48 for mowing duties.- 2023 X350/42 YUT.


My wife bought me a SkyHook for Fathers Day,, I just tie a rope to whatever is convenient,,

Some of the tractors include JD 4105, JD 855, JD 650. and. the IH 584 4WD My favorite attachment is the homemade landplane. EVERYONE needs one of those!!


Does anyone use pallet forks to lift a riding lawn mower to clean the deck and sharpen blades? If so what do you use as the lifting points or do you just lift one end and chock/block the wheels and set the lifted end on cinder blocks in case of a hydraulic failure? Yes, I’m a newbie. I don’t even own pallet forks yet.

I have picked up a Craftsman lawn mower and pulled the blades off to be sharpened. Its not a recommended practice I must say, as the hydraulics can and usually leak back just enough that will allow them to drop slowly. I actually picked it up from the back stuffing the forks back to front and most of it grabs the mower deck. As I get older and slightly wiser, next time I do this I will pick it up and lower it back down onto a set of 4 jack stands placed strategically at the rear axle near the tires and also at the spindles on the front tires. This should at least get it up high enough to safely maneuver around and get the blades off to be sharpened.

Lift for a Mower

The Perfect Lawn Mower Lift to Reduce Mechanic’s Fatigue

Created to reduce mechanic’s fatigue, the lawn mower lift from Quakermayd is ideal for mechanics, hobbyists, and lawncare technicians. Since its creation in 1959, this popular lawn mower lift table has been installed in commercial shops, motorcycle stores, residential garages, and much more. If you are someone who is looking for an easier way to work on riding and zero-turn lawn mowers, our lift is the perfect solution.

See why customers can’t stop talking about their Quakermayd Lift and view our image gallery below to see our commercial lawn mower lifts in action!

Zero-Turn Riding Lawn Mower Lift That Rotates 360 Degrees

At Quakermayd, we know that finding the perfect riding lawn mower lift is no easy feat. When working with heavy lawn equipment, it can be difficult to get your lawn mower on a lift, let alone work on it without causing serious back pain. With the Quakermayd Lift, our lawn mower lift table is installed flush to the ground, so you can easily drive or roll your riding or zero-turn lawn mower onto the lift with no problems.

Then, simply adjust the lawn mower lift to your ideal height, and get a full 360-degree view of your equipment. The ongoing maintenance of our riding lawn mower lift is extremely limited, so you can spend your time fixing equipment and less time keeping your lift up to date. If you are interested in adding this zero-turn mower lift to your shop or garage, call us today for a free quote!

Benefits Of Our Lawn Mower Lift Table

There truly is no other lawn mower lift table with the same features and benefits as our Quakermayd Lift. Take a look at our exclusive lift benefits below:

  • Takes up almost no space
  • Rotates 360 degrees
  • Lift is flush to the ground to allow lawn equipment to be driven or rolled onto it
  • Easy to install and maintain
  • Long-lasting and durable
  • 5x7x1/2 inch plate easily accommodates zero turn lawn mowers
  • 100% customer satisfaction

And with our easy lift installation process, your Quakermayd Lift will be up and ready to go in no time.

Need a lift for snowmobiles, ATVs, motorcycles, and golf carts? See how the Quakermayd Lift can help with these other heavy equipment needs!

Shop Our Lawn Mower Lifts for Sale Today!

When looking for an affordable, long-lasting lawn mower lift for sale, you can’t beat the Quakermayd Lift. This riding lawn mower lift can accommodate any size or style of lawn mower and rotates 360 degrees for full coverage. For mechanic and hobby shop owners that are experiencing back pain, our lawn mower lifts can be adjusted to the perfect height for you in order to reduce and even eliminate backaches and fatigue. Stop using subpar lifts for your lawn equipment; make the switch to Quakermayd Lift today.

864 N. West End Blvd. Quakertown, PA 18951 | Store Hours: M-F 8am-5pm ©2020 Quakermayd Lift. All rights reserved. | Web Design SEO by WebTekPrivacy Policy | Sitemap