How Much Stihl Oil Per 1 Liter Of Gasoline
Question: “And if I poured green oil into gasoline, now I will pour red. Would it hurt the chainsaw? ”
Answer: No, it will not harm your chainsaw, lawn mowing or other two-stroke engine tool. The main thing is that oil cattle is for two-stroke engines with air cooling.
Question: “I have left the fuel mixture from last season. Can I add fresh to it or is it better to merge the old? ”
Answer: Better merge. Although it depends on the amount of the old mixture. If you have 100 grams left and you want to fill another 5 liters with fresh, then you can not drain it!
How much oil to pour in gasoline for a Stihl chainsaw
GASOLINE. OIL. | Topic Author: Roshaun
Guys tell me which oil is better to be bottled in gasoline? And which gasoline is better?
Yury (Devon) I get in the way 2t Lukoil. I fill 80 with gas. I started it in 33 without problems from the first jerk. I like it)) I only keep the can of oil at home. In the cold it freezes and does not mix with gasoline
Ilgiz (Eliane) Is Stihl suitable for a chainsaw?
Dmitry (Shiori) no
Alexander (Elwen) 30 liters of skok gram oil better?
Yury (Devon) There used to be a lot of controversy on this topic. They pour everything differently and everyone has different oils.
for two-stroke engines, oil is sold differently. I get in the way 1:40, although it says 1: 50 on the canister. I don’t really trust domestic oils))) Some people said that it’s better to autol 1:30. I dug up the whole Internet that year, but that’s the answer I didn’t find the exact one. Everyone pours in different ways and everything normally goes without a deposit and without seizures)) Miracles))
Yulia (Netaniah) benz 92 I interfere with 1-50 Hado oil for 2 tons with a revitalizing agent fever infection and pulls and does not smoke. 1 liter costs 700 p.
Tags: How much oil to pour in gasoline for a Stihl chainsaw
how much oil to add for chainsaws, braids JOIN VSP GROUP PARTNER PROGRAM:.
How much oil should I add to 1.5 liters of gasoline to work on a Stihl chainsaw? | Topic Author: Peter
Katya Needed. 33 grams of oil
Zinaida a glass of butter.
Ilya Usually for a gas tool – 1: 50. And I did not try to read the instruction ?? They say useful!
Zoya in the same set of measuring jars. Gas. this is gasoline, Oil. oil, respectively
Oleg According to the passport 1:50. I flood 1:35. Smoke a little, but not critical. All three saws work fine
Denis 30.35 grams
Category Page → Strength of Technology
↓ It will be interesting to you ↓
Stihl chainsaw oil: which to use, proportions
Any two-stroke engine of a chainsaw runs on a mixture of gasoline with oil, respectively, how long it will last depends on the quality and the correct mixture of these components. Also, in chainsaws, it is necessary to lubricate the tire and chain, and the quality of lubrication is not the last factor affecting the duration of use of these parts of the chainsaw. In this article, we’ll talk about the oils that Stihl produces and recommends for use not only on our own chainsaws.
Stihl two-stroke lubricant
Stihl engineers are developing oils that are optimally suited for all two-stroke engines installed on Stihl chainsaws and more. The Stihl two-stroke engine lubricant line includes several product options:
- Stihl HP;
- Stihl HP Ultra;
- Stihl HP S
Stihl HP Review
Stihl HP is a chainsaw lubricant designed to meet the highest quality requirements and is designed to lubricate the internal parts of the engine during operation. It is made on a mineral basis and has good combustion performance (it has a low level of emission of harmful substances during combustion).
The original Stihl HP is red and sold in Stihl’s original packaging.
It comes in several packaging options, the most popular of which is a one-liter bottle with an integrated dispenser. You can also find Stihl HP in five, ten and fifty-five liter cans.
The smallest Stihl HP packaging, which is convenient to use when you need to prepare just one liter of the fuel mixture, is a twenty-gram plastic bottle.
The company also produces one hundred gram bottles of Stihl HP, which can be used to prepare five liters of fuel mixture.
According to the manufacturer’s recommendations, Stihl HP can be used to prepare the mixture for any two-stroke engines.
Shelf life, if stored in unopened containers, is 4 years.
Stihl HP Ultra Review
Unlike conventional Stihl HP oils, the HP Ultra is designed for high engine loads during operation and is recommended for use on professional chainsaws. This is a synthetic oil. In order to prevent consumers from confusing diluted fuel, it has a green color, respectively, a ready-made mixture of gasoline with Stihl HP Ultra, also has a greenish tint.
There are only two packings of this oil. This is a Stihl HP Ultra 100 ml and 1 liter with dispenser.
The cost of Stihl HP Ultra is almost twice the price of Stihl HP and for this reason it is less popular in our country.
Shelf life Stihl HP Ultra four years.
Designed for high-performance and four-stroke engines made using 2-MIX technology. The specs are slightly worse than those of the HP Ultra, which is why the HP Super is not currently on sale at official Stihl dealers.
The proportions of the fuel mixture
Very often, people ask how much oil per liter of gasoline is considered the norm. It is easy to answer it, because the instructions for any Stihl chainsaw, as well as on the additive packaging, indicate that when using original Stihl products, the proportions of oil and gasoline should be 1:50. This means that for one liter of fuel, it is necessary to add 20 ml of additive.
During the break-in period of a new chainsaw, it is allowed to slightly increase the amount of oil per liter of gasoline. For example, you can dilute one liter, 25 ml of oil, this will reduce the load on the grinding parts and extend the life of the chainsaw.
Which oil to choose
If you are a regular user of a chainsaw and do not use it for 6-8 hours daily, while working only in the summer, then you can use the usual Stihl HP to prepare the fuel mixture for your chainsaw. The optimal ratio of price and quality of the lubricant has made it popular among millions of users of gasoline powered tools.
Stihl HP can be used to make mixes for any two-stroke engine, including moped motors and boat options.
Stihl Chain Oil (Oil Overview)
The Stihl range of chain lubricants includes three types of products, these are:
- BioPlus. for chains;
When working, it is necessary to use the type of lubricant that best meets the conditions and duration of work. Consider each of the oils for the Stihl chain in more detail.
ForestPlus chain lubricant is a high-quality product that creates a reliable film on the tire web and chain links that holds well even at maximum chain speeds.
It is packaged in three types of containers, a liter bottle and canisters of five and twenty liters.
ForestPlus has the lowest shelf life among Stihl oils, which is only three years old under proper storage conditions.
BioPlus Chain Oil Overview
BioPlus is made on a plant basis, which allows it to decompose when it enters the soil in a short time. This property is marked by the European sign of environmental safety. According to information that is available on the manufacturer’s website and is official, BioPlus has been tested according to OECD 301 B.
For the maximum convenience of consumers, it is packaged in 4 types of containers, these are:
- Liter bottle.
- Three liter canister.
- Five liter canister.
- Plastic twenty-liter canister for those who work with a chainsaw daily and spend a large amount of lubricants.
The price of BioPlus may vary depending on the region of sale.
Shelf life of BioPlus is four years. Brown colour.
SynthPlus is a semi-synthetic oil that retains its properties even under the most severe conditions. It is able to maintain performance at a temperature of minus 25 degrees. SynthPlus mixes well with BioPlus, making it easy to switch from one type of oil to another.
SynthPlus has a high shelf life, which, when properly stored, reaches seven years. SynthPlus oil color, brown.
Stihl SynthPlus is packaged in containers of the same capacity as BioPlus.
Which oil to choose for the chain
The optimal oil option for chain lubrication is BioPlus, and it is worth choosing for those who saw with a chainsaw from time to time. The optimum price and quality of BioPlus has made it the most popular Stihl chain lubricant.
It is also worth remembering that BioPlus does not harm the environment, because it is made on a plant basis and decomposes in the shortest possible time, which is also important when working with a chainsaw in its own area.
How to distinguish fake Stihl oil
Attackers do not miss the opportunity to earn on the sale of fake products of a well-known brand. Stihl oil is no exception. Most often you can find fake Stihl HP, because its sales volumes are the highest of the entire Stihl range of lubricants.
In order to distinguish the fake from the original, Stihl issued a special brochure, which recorded all the main differences between the original and the fake.
Also, we suggest you watch a video in which a concrete example shows how a package of high-quality Stihl oil should look and how to distinguish a fake.
We reviewed all of the Stihl oils, and found that the most popular lubricant for 2-stroke engines is Stihl HP. It is it that needs to be used under ordinary conditions, because in this case you do not have to overpay, and the engine will be reliably protected.
Saw chain, for ordinary users, must be lubricated with BioPlus, because the other options are designed for harsh conditions or work in the winter. Also, we figured out that the correct ratio of gasoline to oil is 1:50, but during the break-in period you can slightly change it and make the mixture in a ratio of 1:40, i.e. 25 ml per 1 liter of gasoline. Learned how to distinguish a fake Stihl BioPlus from the original.
Recommended proportions of gasoline and chainsaw oil
The fact that it is forbidden to pour “clean” gasoline into chainsaws is warned by buyers’ sellers at the time of purchase of the tool. Many buyers learn about this for the first time, wondering why it is necessary to dilute gasoline with oil. If this rule is neglected, then the consequences for the instrument can be simply catastrophic. In most cases, even engine overhaul will no longer be able to help. In the material, we find out what proportions of gasoline and oil should be for refueling the chainsaw, and also what may lead to non-compliance with this rule.
Why add oil
At the heart of any chainsaw is a two-stroke internal combustion engine. This is one of the simplest mechanisms, consisting of one cylinder and without a separate lubrication system. The technology is such that the lubricant must enter the cylinder with the fuel mixture, settle there, and lubricate the cylinder walls, piston rings, etc. The simplicity of the design of the tool has many advantages, among which the main one is the ability to repair the engine and its components independently.
Diluting gasoline, which is poured into the chainsaw, is required in order to extend the life of the tool. Diluting the fuel with chainsaw oil is mandatory, and if for some reason you forgot to do this, then the use of the tool is strictly contraindicated.
It’s important to know! In chainsaws there is no special tank for pouring oil, which would be spent for lubricating the rubbing parts of the engine, as in cars. This is due to the simplest design of a two-stroke motor. The present oil tank in the chainsaws is designed to lubricate the chain and tire during the operation of the tool.
Proportions of oil and gasoline for chainsaws
How much oil to add to gasoline for a chainsaw is indicated primarily in the instructions for use of the tool. If you forget what the proportion of oil and gasoline should be, then you can always open the instructions and update your knowledge. If the instruction is lost, then this material will help you. To begin with, it is worth noting that there are several options for mixing oil materials with fuel. Choosing any, it is worth noting that the main criterion for each is the correct measurement of the components. Only exact observance of the proportion of oil and gasoline will achieve the fuel mixture of the necessary technical qualities.
One of the most common proportions is 1:50. This means that 1 liter of gasoline must be diluted with 20 ml of oil. This recipe for the preparation of the mixture is relevant for tools whose power exceeds 1.5 kW. This option is one of the most popular, so if you forget the exact proportions for your instrument, you can always focus on the first option.
The second option provides for a proportion of 1:25. To mix 1 liter of gasoline with 10 ml of oil is recommended by Chinese manufacturers for their tools. For tools whose power does not exceed 1.5 kW, it is recommended to pour oil in an amount of 25 ml per 1 liter of gasoline. Each manufacturer’s chainsaw has its own limitations, and recommendations for the preparation of the fuel mixture, which are recommended to be followed. The two main options that are universal are listed above.
It’s important to know! The excess amount of the oil mixture in the fuel is also negative, as this will lead to a reduction in engine life due to increased shock loads on the cylinder and piston, and will also lead to the formation of soot.
Not everyone knows what kind of gasoline to pour into a chainsaw. This is also indicated in the technical documentation for the chainsaw. In modern saw models, it is recommended to pour fuel of a brand not lower than AI-90, that is, AI-92 or AI-95. And it doesn’t matter who the tool manufacturer is, China or Europe. Professionals recommend the use of AI-92 gasoline, since the 95th is in most cases made from 92 by adding additives. If you know for sure that it is really pure 95, then it is better to use it.
Видео: How Much Stihl Oil Per 1 Liter Of Gasoline
Many craftsmen continue to pour gasoline of grades lower than AI-90 into modern chainsaw models, as this was allowed to be done for obsolete models of tools: Friendship, Taiga, and others. This is not recommended!
Which oil to use to lubricate the chainsaw chains depends on the model of tool. Stihl brand saws and the like produce special lubricants that are intended only for use in such tools. Recommended oils can also be found in the technical documentation. When choosing a lubricant, attention must be paid to ensure that it is intended for two-stroke engines. Oils for mixing with gasoline and for chain lubrication differ in composition, quality and purpose. You can not mix them, as this will accelerate the failure of the tool. Recommended brands of oils for two-stroke engines:
Saw refueling algorithm
A mixture of gasoline and oil is best prepared in a 2.5-liter plastic bottle if you often need to refuel the tool. If it is necessary to prepare fuel for only a few refueling, it is better to use a smaller tank. It is recommended that you acquire measuring tanks, this will allow you to observe the exact proportions of both liquids. Most oil manufacturers offer such measuring devices.
Initially, fuel is poured into the tank, and then oil is added. It is important to consider that there should be enough space in the tank to thoroughly mix the fuel mixture.
It’s important to know! It is strictly contraindicated to prepare the fuel mixture directly in the tank of the instrument.
After preparation, it is recommended to store this mixture no more than 2 weeks. At each filling, it is recommended to shake the mixture thoroughly. If you are not sure that all fuel will be used up, it is better not to cook it in large quantities.
Risks of using fuel and oil substitutes
To avoid premature failure of the chainsaw, it is recommended to refuel the tool with exclusively high-quality and branded consumables. Finding such materials is not difficult, since they are usually sold at branded points of sale. The use of low-quality gasoline can cause engine failure, so it is recommended to buy fuel at gas stations where high fuel quality is guaranteed.
It is strictly contraindicated to mix gasoline with motor oil for cars, since it is not at all intended for such purposes. Compliance with the number of proportions, as well as the use of quality materials will extend the life of your tool for many years.
How Much Oil to Stihl Chainsaw
Proportions of oil and gasoline for a chainsaw
proportions of oil and gasoline for chainsaw
At what concentration, dilute the oil with a Stihl saw. Saw Stihl 180,how much oil per 5 liters of gasoline
Hasik Pupil (69), closed 2 years ago
Vladimir Kostyuk Oracle (73819) 3 years ago
The whole truth about chainsaw and oil. With what 100% I agree. I do not have it, but if it was, I never agreed to a ratio of 1:50. Applied earlier 1:25 for similar (various engines) and everything served. I dug it specially for you:
The most precious thing in a chainsaw. this is the piston, the most affordable in a chainsaw. it is fuel and oil.
Use the brand of gasoline indicated in the annotation
Do not keep the fuel mixture of oil and gasoline for more than a week, it decomposes and loses its characteristics, the result is a jammed saw, a piston change, it is better to breed the latest mixture every time before work.
It is better to drain the fuel from the tank after work; otherwise, a coating appears evenly in the carburetor.
Do not use moped oils for chainsaws, modern chainsaw engines are more revolving than moped engines, you will shorten the life of the saw by 7-10%.
Use a syringe for an accurate dose of the consistency of oil and gasoline, underfilling the oil instantly kills the piston. Pour oil into gasoline at 10-30 grams per liter more than indicated in the annotation, oils for Ukraine differ in quality from oils for the west, where the annotation was written. The best oils for chainsaws. Naturally, you can pour in Stihl imported chainsaw, how much oil to pour. Jonsered, Oleo-Mac, Stihl. (the last is 3 spills, the original costs 120 UAH more, license 80, high-quality fake 40-60 UAH, but pour it needs 50 grams per liter, the stronger the crimson color and the less hazel, the better the oil), for Motor Sich and old Russian chainsaws Azmol Start2T.
No need to take special precious oil for chain lubricant (this is a divorce), the most affordable auto mineral oil is suitable, (just not working off, it will destroy and clog the oil pump) and in winter the spindle will do.
Add oil to lubricate the chain at each refueling, if the oil tank is half empty, then the oil pump does not absorb the oil in all positions of the saw, this greatly affects the durability of the tire.
Be sure to lubricate the sprocket bearing at the end of the tire before each work, putting the saw on its side and dripping oil on a special hole in the tire, manually turn the chain in the direction of travel (turning against the motion, cut your fingers on the teeth of the saw). Bearing will fly out, throw out the tire, and this is a completely unavailable spare part.
Inspect the operation of the chain lubrication oil pump before operation, point the tip of the saw to a light surface and lubricate. An oil stain should appear.
From time to time, lubricate the sprocket bearing, it is possible with grease, or, in the last case, with the same oil that is used to lubricate the chain.
Gasoline and oils for chainsaws.
The quality of these service materials has a decisive effect on the operation and life of the chainsaw motor. On any saw, a two-stroke carburetor engine and two tanks are installed (one for filling the fuel consistency, the other for filling the oil to lubricate the chain). The volume of the fuel tank is from 0.3 to 1 liter, and the volume of the oil, usually 1.5–2 times less. This ratio of volumes leads to the fact that the oil for lubricating the chain and the fuel mixture are completed almost immediately, and specifically after 30–45 minutes of operation (at full load).
The need to make a fuel consistency is clear to everyone who is familiar with two-stroke engines: the difference between the duty cycle of a two-stroke engine and a four-stroke one leads to the fact that it is impossible to use an oil pump system to lubricate all rubbing parts (piston, shaft, etc.) and oil must be added specifically in gasoline. All this is quite fundamental, because the tests work only on gasoline or a violation of the required proportions of gasoline-oil consistency will quickly lead to tool breakage.
Tips for brands of gasoline and oil, also in proportion fuel mixture subsequent. When working with Russian chainsaws, 76th gasoline and ordinary oils for two-stroke engines are used, which are added to the mixture in an amount of about 4%, in other words, in a ratio of 1/25. Foreign models require the introduction of gasoline with an octane rating of 92 (or higher) and branded oils from chainsaw manufacturers (with all this, the oil content in such a consistency should be about 1/40).
In principle, Russian oils for two-stroke engines can also be used on foreign chainsaws, but two incidents should be implied. First, you must be convinced that gasoline is spotless. 2nd — if oils are designed for engines with revolutions up to 8.5 thousand per minute, and for chainsaws of foreign production revolutions are able to reach 11-14 thousand, then the introduction of these oils reduces the tool life by an average of 7-10%. But for Stihl, how much oil to add to gasoline for how much oil to pour into gasoline. There is a game of candles. decide for yourself.
With oil for lubrication of the saw apparatus is more ordinary: in all models of household and professional chainsaws, you can use ordinary Zhiguli oils (for example, engine oils are recommended for Husqvarna models, and transmission oils are recommended for Stihl).
Attention should also be paid to the seasonal operation of the tool. If the saw is used at low temperatures, then even with the right choice of all ingredients, the quality of the oil and fuel consistency may be unsatisfactory (crystallization occurs and viscosity increases significantly). In this case, the saw itself must be adapted for use in such criteria. for example, it is necessary to predict the possibility of a carburetor warming up during operation. In addition, it is recommended to warm up the saw before work (if it was stored in an unheated room). in order to avoid unnecessary consequences due to the presence of condensate.
Refueling Stihl MS180 Chainsaws, gasoline and oil.
Chainsaw Stihl MS180 A couple of points about what kind of water you need flood in chainsaw. Always keep an eye on
Chainsaw Stihl MS180 oil dispenser. We make a mixture. Secrets and tricks. Life hack
Chainsaw Stihl MS180 dispenser oils. How and in what ratio mix oil and gasoline for for a chainsaw: how much oil is on. We make a mixture. Life hack Often have to make a mixture for chainsaws and skein
The fuel mixture has the property of oxidizing, so the supply of the mixture should be prepared only for a month. The fuel tank of the chainsaw and canister must be cleaned from time to time.
Before refueling the chainsaw, clean the threaded plug of the filler neck of the fuel tank and the surroundings of the tank so that no dirt enters the tank!
When refueling a chainsaw, make sure that no fuel is spilled and do not fill the fuel tank to the brim.
Do not use four-cycle car oils to prepare the fuel mixture! This leads to the release of their system of parts of the cylinder-piston group
How to use a chainsaw
If you have a chainsaw, then for its long service it would be nice to know how to use a chainsaw. This will be discussed in this article.
One of the main causes of chain saw breakdown is improper preparation of the fuel mixture. The manufacturer always indicates the proportion of oil and gasoline for the chainsaw at which the chainsaw should work. When oil is added to gasoline between the piston and the cylinder, excessive friction occurs, which ultimately leads to scoring and failure of the saw. When overflowing, everything is not so scary, but in this case there may be problems with starting the saw, and deposits may also appear, which can also lead to premature wear.
To mix the oil with gasoline, you can use special tanks with divisions that show how much to pour gasoline and how much oil. For even greater accuracy, a medical syringe can be used. In no case do not use containers not designed for gasoline, for example, one and a half cups from under sparkling water or beer. Gasoline corrodes such plastic and everything that it corrodes will eventually fall into the engine and remain there. Use glass or metal containers, or special plastic containers designed for gasoline.
It is better to use oil for the fuel mixture that is indicated by the manufacturer. As a rule, if you use some other oil, then if the piston group breaks down, such a case is recognized as non-warranty. If there is absolutely no way to use the oil specified by the manufacturer, but you need to work, then you can use another oil for two-stroke engines, but in this case it is recommended to fill it with more. For example, if you have the proportion for working with # 171 native # 187 oil 1:50, then with # 171 non-native # 187 fill in the ratio 1:40. However, this still cannot guarantee that the saw from # 171 non-native # 187 oil will not do any harm. Like "how much oil to pour on 1.2.5 you need 50 ml. Oils (per 1 liter (Stihl 180). Manufacturers say that they only guarantee that the saw will work properly using the oil they point to. It’s not known how the saw will behave with another oil.
If anything, a whole bunch of chainsaws for every taste and the wallet is here (click)
Next, answering the question how use a chainsaw, consider an element such as an air filter for a chainsaw. Its clogging leads to overheating of the saw and the inability to give out full power. The filter can be nylon, felt, as well as foam. Nylon and foam filters can be washed in soapy water and used again after drying. Felt filters need to be replaced with new ones.
Now let’s talk about the tire and the chain.
In order for the chainsaw tire to wear evenly, it needs to be turned over periodically, that is, for example, today it was sawed in one position, the next time we turn it over.
Before using a chainsaw, it is advisable to stock up not in one but in several chains. The most ideal condition is if you use three chains alternately. In this case, during the time when the chains are completely worn out, your tire and drive sprocket are completely worn out. And if you use, for example, one chain, then when it wears out, the drive sprocket will still be in good condition, but the groove from the old chain will be knocked out on it, and when you put in a new one, it may not stand up, as it should, as times due to the fact that the old chain was stretched during operation and left behind a groove # 171 for itself # 187.
In order for the chain to serve for a long time, before sharpening it on the machine, it can be edited 8-10 times with a file. Why only 8-10 times? Because, no matter how hard your hands are, the corners on the cutting teeth when cutting with a file you still beat. And just on the machine, these angles will align. Why then you can not constantly grind only on the machine? Because the machine grinds too much from the cutting tooth when sharpening, so if you constantly grind it on the machine, the cutting tooth will quickly erase and the chain will become unusable.
Blunt chain sawing causes an excessive load on the engine. Therefore, always correct and sharpen the chain in time.
After operation, leaving the saw in storage, always loosen the chain. During operation, it heats up and expands. Chainsaw chain lubrication oil, how to properly prepare the mixture yourself, what are the proportions of oil and gasoline, what to mix and how much to pour the mixture. Including because of this, you pull it. After work, it cools, shrinks and begins to pull the drive shaft, which leads to premature bearing wear. If the chain is loosened, then the bearing, of course, is not in danger.
It is advisable to use special oils to lubricate the chainsaw chains. They contain adhesive substances that allow the oil to “stick” to the chain. Thanks to this, such oil will lubricate the entire tire and the sprocket at the end of the tire during operation. Conventional oils, due to the high speed of the chain, almost completely fly out of the tire and chain, without even reaching the sprocket at the end of the tire. Because of this, the tire crashes faster. And in no case do not use "mining". The dirt contained in such an oil can easily clog the oil channel and the oil will not flow to the chain and tire.
If you removed the tire, before installing it again, make sure that the channel through which the oil for lubricating the chain enters is clean and clean it if it is clogged with something.
During sawing, be sure to give full gas when making a cut. After making the cut, you need to let the saw idle a little. At the same time, the cut time should preferably not be more than 30-40 seconds.
Well, now you know how to use a chainsaw correctly so that it lasts as long as possible.
Video # 171 How to use a chainsaw # 187 (6:50)
sourceSources: http://otvet.mail.ru/question/78647951, http://www.domotvetov.ru/stroitelnyij-instrument/benzin-i-masla-dlya-benzopil.html, http: // instrument-tehnika. com / kak-polzovatsya-benzopiloi /
Simple helpful tips.
Fleas in cats and dogs. A great way to fight.: A cat, dog or other animal can be freed from fleas if you bathe it in a decoction of tobacco. Then wash with warm water.
To prevent cheese from drying out: To protect the cheese from drying out, place a saucer with a little sugar next to the cheese. Cover it with another saucer. How to refuel a chainsaw. How much oil is needed in gasoline. Sam LLC offers comprehensive services. So cheese can stay fresh for a long time.
The ratio of gasoline and oil for stihl chainsaw
How to dilute gasoline with chainsaw oil
How to dilute gasoline for a chainsaw?
How fuel for chainsaws gasoline with the highest octane rating is used: AI-92, in other words, AI-95.
dilute gasoline for chainsaw
30 g of special motor oil should be added per 1 liter of gasoline. The purchased mixture is poured into a special fuel compartment.
So that dilute gasoline for chainsaw. before this, consult with specialists. It is best to ask those who work in the service center for their repair.
They ate their teeth on this.
And the sellers who advertise them in the supermarket and hang us up all kinds of noodles on the ears will not tell us anything worthwhile.
It was like that with me, but not with a saw, but with a scythe. It worked poorly, it did not start very well, it detonated strongly and did everything to mix gasoline and oil, as sellers said.
Read the same
But when I contacted the service center. said something completely different ratio fuel parts.
And now everything is working fine.
For the saw you need to take gasoline AI-95 or AI-92 and mix in proportion to oil. in 1 liter of gasoline 40gr of oil.
How to breed gasoline for a chainsaw
In order for the chainsaw to serve for a long time and not cause problems with repair, you need to properly prepare the fuel mixture. Online forums abound with questions on this topic. We interviewed experts and compiled a brief instruction.
Proportion of oil and gasoline for stihl chainsaw.
To prepare the fuel mixture, use AI-92 or AI-95 gasoline. A lower octane will not work. Gasoline is not necessarily leaded (otherwise the engine will fail) and not old (the octane number may change over time). It is forbidden to use oil for boats and four-stroke engines.
The main issue is proportions. Excess oil will cause carbon deposits on pistons and candles. Excess gasoline will cause seizure on the pistons and a quick engine breakdown. On average, one liter of gasoline is mixed with 20-50 ml of oil. Stihl and Husqvarna, for example, recommend taking 100 ml of oil for 4 liters of gasoline. The specified proportion is optimal for chainsaws up to 1.5 kW. For chainsaws with a power exceeding 1.5 kW of the same grades, use a proportion of 1/50 (100 ml of oil per 5 liters of gasoline). Recommendations from Partner and Jonsered: 1/33 proportion (3.3 liters of gasoline 100 ml of oil). Supersynthetic oil is added at the rate of 100/1. These figures are approximate. Always use the information given in the instructions for the specific model of the chainsaw. Less trust the numbers on the labels. oils.
Chainsaw Stihl MS180 oil dispenser. We make a mixture. Secrets and tricks. Life hack
Chainsaw Stihl MS180 dispenser oils. We make a mixture. Lifehack Often you have to make a mixture for a chainsaw and a skein.
What to mix? On sale are canisters with graduated divisions and two holes. for oil and gasoline. Pour the ingredients, twist the lids and mix, tilting the container.
Read the same
Many use glass and plastic bottles, baby horns and syringes. Be careful with glass and plastic, beware of static electricity. Ensure that no solid particles or drops of water get into the mixture. Be sure to mix the mixture thoroughly.
Ready fuel can not be stored for more than 25-30 days, because the oxidation process changes its composition. Engine damage caused by overexposed fuel is recognized as non-warranty. The amount of repair reaches 80% of the cost of a new chainsaw. After the end of the working season, use up the remaining fuel, switch off the engine, remove the remaining fuel mixture.
Remember, your goal is to create a mixture that will ensure uninterrupted operation of the engine, complete combustion of fuel without the formation of soot, smoke or scuffing.
How to pour gasoline into a Stihl chainsaw?
The work of any chainsaw, a wide selection of which is presented at zakazik.ua/products/benzopila.html. It is provided with a 2-stroke engine, the design of which does not imply the presence of an oil pump. That is why only a mixture of gasoline and oil is poured into them. In its pure form, the use of gasoline is strictly prohibited.
Proportions of the mixture for refueling Stihl chainsaws
Specific proportions should be indicated by the manufacturer in the operating instructions. Quite often, it is written in them that it is necessary to fill in gasoline of the AI-95 brand. But the octane number in domestic fuel in most cases is reached by various additives, which significantly reduces its quality. Therefore, it is recommended to use AI-92 brand gasoline to refuel modern Stihl chainsaws.
Oils are selected specialized for a 2-stroke engine, corresponding to the power class of a chainsaw. the best option would be a mixture of the same brand Stihl. They have red (mineral) and green (synthetic) colors.
A fuel mixture of gasoline and oil is prepared in strict compliance with the manufacturer’s recommendations. For Stihl chainsaws, the proportions are usually 1:50, that is, 20 grams of oil must be added to 1 liter of AI-92 gasoline.
You can measure the amount of oil by any means. a syringe or some measuring utensils. But the most convenient to use are dispenser bottles in which Stihl oils are available.
In order for the Stihl chainsaw to work productively for many years, you must adhere to the following recommendations:
- Gasoline should be fresh, not from a canister a month ago.
- It is forbidden to use oils for 4-stroke engines. It will not completely burn, which will lead to the formation of carbon deposits and the rapid failure of the cylinder-piston group (CPG).
- In a 2-stroke engine, the oil should burn without residues, so it is advisable to use synthetics, which is characterized by the formation of fewer residues of combustion and smoke.
- When diluting the mixture, it is better to add more than the recommended amount of oil, but within a reasonable range. 5 grams of excess per 1 liter of gasoline will not lead to coking. Larger amounts can cause carbon deposits and damage to the CPG. If you pour 5 grams less than indicated, this is fraught with overheating of the piston and cylinder.
- Do not use the prepared mixture a month ago.
- It is forbidden to use oils for mopeds. they are not intended for chainsaws, as they are designed for fewer revolutions.
- After the season, the mixture must be completely consumed or drained to avoid loss of properties. gasoline, as well as wear on the seals.