How to clean a filter in a Bosch dishwasher

Dishwasher trash filter and its elements

Any user of a Bosch dishwasher (and another brand) who takes the time to read the instructions for it knows where the trash filter is. In an amicable way, after the purchase, installation of the “dishwasher” and its first test run, the first thing you should do is to deal with the trash filter, find it, unscrew it, consider all its elements.

The trash filter is located at the bottom of the dishwasher tank. In this case, by the tank we mean the inside of the machine, the bunker in which the baskets for dishes are installed. And in which we put dirty dishes. If we take out the notorious baskets for dishes, then at the very bottom of the tank of the Bosch dishwasher, we will see a rotating plastic sprinkler. To the right or left of it is a glass-like twisting element. this is the trash filter, which consists of the following elements:

• from a flat metal mesh, called a fine filter;
• from an external coarse filter, similar to a fine-mesh glass, which is located directly under the mesh;
• from the internal coarse filter, which is inserted into the external filter. It also fits under the mesh.

The trash filter is designed to trap food residues washed off from dirty dishes and prevent these residues from getting into the circulation pump.

As you understand, quite a lot of these residues will accumulate on the filter, even though dirty dishes will be cleaned before placing them in the washing basket. If the fine mesh, and even more so the coarse filters, become clogged with dirt and grease, water will stop leaving the tank back into the circulation system and the Bosch dishwasher will stop working.

Important! After each dishwashing, look at the bottom of the tank and check the condition of the metal mesh, if pieces of food and other dirt are clearly visible on it, it is better to carry out an extraordinary cleaning.

Replacing the dishwasher filter

To prevent a quick breakdown of the dishwasher, it is necessary to monitor it at least occasionally. According to the recommendations of specialists, a small preventive cleaning should be carried out about once every two weeks. This prophylaxis boils down to cleaning the filter. If the dishwasher has been in use for a long time, then you need to think about replacing the filter. Replacement and cleaning features of the “dishwasher” filter. this is the topic of our story.

We clean the filter correctly

To properly clean the filter of a Bosch dishwasher, you do not need to have any special knowledge or skills, anyone can do this simple job. The main thing is to do everything on time and not to allow a blockage to form, because the blockage will lead to a breakdown of the machine. Each brand and model of dishwasher may have its own peculiarities with regard to cleaning the dust filter. The shape of the filter, its location, removal features may differ, so we will describe a typical procedure that is suitable for most dishwashers. And so, in order, we do the following.

After removing the blockage, you can safely assemble the filter and put it in place, but before that, carefully inspect each element. By the way, you need to clean not only the filter, sometimes you also need to clean the tank and the outside of the dishwasher, you can read about how to do it correctly in the article How to clean the dishwasher with your own hands.

The plastic cup and plastic grate must be intact, the fine mesh must also not have visible damage. If you find broken elements on the external or internal filter, or there is damage to the metal mesh, then the filter of the Bosch dishwasher (or other) is better to change.

How to understand if the filter needs to be replaced and how to change?

Replacing the filter is easy. Actually, what is difficult here, unscrewed and threw away the old filter, took it out of the package, assembled and installed a new filter. a matter of three minutes. But in fact, the whole “salt of the question” is not even in the process of replacing the waste filter, but in how much such a replacement is advisable, and whether it is necessary to produce it.

By the way, the cost of a new coarse filter can go up to 3,500-4,000 rubles, although it looks like a simple plastic part, though made somewhere in Germany or Italy.

Many dishwasher users are wondering: why buy and install a new filter, when the old one, even being damaged, works well, collecting dirt? Why spend a lot of money when everything is working fine anyway? In fact, to think so is a big mistake, everything can turn into expensive repairs. Imagine that you have left a damaged coarse filter in operation, which in this case can happen.

• Some of the food debris will still settle on whole parts of the damaged filter mesh, but some of the dirt will slip through the damaged element.
• Getting into the circulation pump, dirt settles inside the tanks, nozzles, heating element.
• In the best case, this leads to a deterioration in the quality of washing dishes, and in the worst case, due to dirt, the heating element may burn out and the circulation pump may fail.

Now let’s count. Replacing the waste filter will cost you an average of 2,500 rubles. Replacing the heat circulation pump, which may break down due to unsatisfactory filter operation, on average 7,000 rubles, and this is excluding after the crisis markup. Here is such arithmetic. What to do in this situation, and whether you need such an approach. decide for yourself, we only provided objective information.

Important! The high cost of spare parts for Bosch dishwashers (and machines of other brands) is due to the fact that they are often produced in Europe, where the cost of production is much more expensive, not to mention the difference in exchange rates.

How do you know when a filter needs to be changed? In this case, everything is simple, if the filter has damage through which dirt can potentially slip through, it must be replaced. If it looks very scary (from time to time), but outwardly remained intact, it can be safely exploited, simultaneously removing the blockage.

Note that both cleaning and replacing the filter of the Bosch dishwasher will not take much time, even if you see such a filter for the first time in your life. Cleaning must be carried out on time and not to allow a blockage to form, because a blockage will cause the machine to stop and an error code will be displayed on the display.

When to change the filter in the dishwasher

Replacing the filter in a Bosch dishwasher is necessary when it fails. It breaks very rarely, many users never even encounter the need for a replacement. However, in some situations it is necessary. Here is a list of these situations:

• Bosch dishwasher shows deteriorating washing results;
• Obviously extraneous holes appeared in the filter mesh;
• The fine mesh is damaged;
• Filter housing is about to collapse.

That is, replacing the filter in Bosch dishwashers is done when the filter ceases to perform its functions. it begins to pass large particles, it ceases to pass water normally, its body begins to crumble.

Note that Manufacturers charge wild for parts, resulting in huge replacement costs. But if you do not replace the filter in time, the engine may fail (it is also a circulation pump). replacing this unit will result in a completely different amount (a new engine costs at least 5-6 thousand, depending on the brand).

How to replace a filter in a dishwasher

Any dishwasher must be cleaned periodically to avoid the accumulation of contaminants that can lead to unpleasant odors and the development of bacteria. And even in the best dishwasher, food particles still remain. they accumulate in the filter. In this overview, we will show you how to change the filter in a Bosch dishwasher. This operation is extremely important for both your cookware and your technique. Replacement process is the same for other dishwashers.

What is a filter

There are many guidelines for cleaning dishes before placing them in the dishwasher. They all boil down to one thing. coarse dirt must be removed. Some users advise rinsing plates thoroughly with hot water so that no large particles remain on the plates. Such a recommendation also has a right to exist, since the dishes in this case will shine clean when they are removed from the dishwasher.

Bosch dishwashers (like any other) work according to the following principle. they drive water in a circle with detergent dissolved in it, throwing it out at high speed from rotating rocker arms. After that, the water falls to the bottom and passes through a special filter. Large and solid particles are retained in this filter, after which the purified water enters the engine again and is directed to the rocker arms.

The dishwasher filter consists of several parts:

• One or two coarse nets. allows you to retain large particles of food;
• Fine mesh. retains the smallest dirt.

As a result of passing through the filter, the water is purified of insoluble particles and enters the circulation pump in order to pass through the rocker arms again, to wash anything off the surface of the plates and cutlery. After that, it falls down to pass through the filter nets again and again.

As dirt accumulates, the Bosch dishwasher filter becomes clogged, requiring not replacement, but just a simple cleaning. replacement is only needed if it is damaged. In order to clean the filter, it must be removed and thoroughly rinsed so that water passes through it without hindrance. Extraction is carried out by twisting. this operation does not require any additional tools and devices.

Cleaning is carried out sequentially:

• First, we wash all the nets with water until it rinses out the accumulated, but non-sticky particles;
• We disassemble the filter and rinse / clean the coarse mesh. if necessary, you can use an old toothbrush or toothpick;
• Thoroughly clean and rinse the fine mesh;
• We wash all other elements, paying attention to fatty deposits. they clog the nets and interfere with the passage of water.

At the same time, the entire working chamber of the dishwasher should be cleaned. all work is recommended to be carried out in a comprehensive manner and with a special cleaning agent.

The result of this whole procedure is a perfectly clean filter that needs to be screwed into its original place at the bottom of the dishwasher’s working chamber. By acting carefully and carefully, you can avoid the need to replace the filter for many years. you need to take care of it so that the amount for the purchase of spare parts for it does not add to the operation of the dishwasher.

Dishwasher filter replacement process

Now we will tell you how to change the filter on a Bosch dishwasher. everything is very simple here. You do not need any tools and accessories. The replacement is carried out in three stages:

• Open the loading door of the dishwasher;
• Removing interfering baskets;
• We carefully unscrew the filter and send it to the scrap;
• We screw a new filter into the hole.

Now everything is ready for further use of the dishwasher. with a new filter, it will serve for several more years without any problems. The main thing is to wash and clean it as carefully as possible in order to prevent repeated failure. replacement will cost another 1-2 thousand rubles, depending on the brand and model of your dishwasher.

We do not recommend that you wait until the filter is completely damaged. The slightest damage to it can lead to unfiltered dirt particles entering the engine. As a result, it may fail. you will have to change it yourself or call a specialist from the service center. Please note that the service center may regard such a breakdown as not guaranteed if there are clearly extraneous mechanical damages on the filter elements of the Bosch dishwasher.

Where is the filter in the Bosch dishwasher?

First you need to understand where the dishwasher filter is and how to get it out for washing. The filter in the dishwasher is located at the bottom (bottom) of the washing chamber and can be easily removed for cleaning and maintenance. To clean the filter, you can refer to the instruction manual of the device.

How to clean the dishwasher water filter?

Cleaning the Dishwasher Filters

• De-energize the unit and shut off the water supply.
• Unscrew the inlet hose.
• Remove the mesh filter from the slot.
• Rinse the filter under running water.
• Reinstall the part.
• Screw on the hose.

Where is the circulation pump in the dishwasher?

The circulation pump is located under the bottom of the dishwasher. To repair the dishwasher pump, you must remove it from the machine and replace the graphite bushings with new ones of the same type, brand and size.

How to extend the dishwasher water supply hose?

If you need to lengthen the drain hose, you need to purchase an extension hose of the required length, 3 new clamps and a herringbone adapter. The adapter is inserted into the end of the hose coming from the machine and into the hose extension. Both hoses are secured with hose clamps.

What is a self-cleaning dishwasher filter?

Self-cleaning filter. self-cleaning by rubbing food residues and flushing them down the drain. Timer (delayed start). automatically starts the wash at a time specified by the user. Allows you to delay the start of the car for 10-20 hours.

Where is the filter in the dishwasher?

A drain or drain filter is located at the bottom of the hopper, in a sump next to the sprayer. Before starting the dishwasher for the first time, examine it to know how it is dismantled and cleaned.

Cleaning the blades

This part of the technique also collects scale and grease on its surface. To clean the blades, the latter are removed one by one from the dishwasher and gently rinsed under running water.

All holes must be cleaned with a fine toothpick or needle. It is through them that water is supplied to the washing basket, and therefore even the slightest blockage leads to poor-quality operation of equipment.

If the blades do not rotate well after installation, it is necessary to remove the fat and scale on the axle.

Cleaning the strainer

The strainer should be washed at least once a week. Its surface is quickly clogged with grease and small food particles, which ultimately leads to an unpleasant odor and possible leakage through the seals.

To start washing the filter directly, you need to remove it from household appliances. This part is placed as standard on the “bottom” of the washing chamber. To begin with, take out the lower basket, then turn the protruding part of the filter, following the arrow.

How to Clean the Filter of a Bosch Dishwasher 6-6

The cleaning process itself consists in washing the part with warm water and dishwashing detergent. After completing the procedure, the filter is reinstalled.

How to clean a dishwasher: 7 steps

The dishwasher is a real “lifesaver” and an irreplaceable assistant in the kitchen. Having turned from a luxury into a necessity, it, together with other household appliances (for example, a stove or a hob), significantly saves time and effort for doing kitchen work.

If you do not know yet, then we will show you: How to choose an electric stove

In order for the dishwasher to perform its functions efficiently, you need to take care of its neatness. The first signs that signal contamination of equipment are an unpleasant odor and a possible leak from the dishwasher (the latter malfunction often occurs due to the accumulation of fatty particles on the door seals). The usual washing of the unit will help to eliminate the problems that have arisen. How to properly clean and care for the dishwasher, you can figure it out by reading the 7 tips outlined in the article.

Cleaning the basket and dead zone

The inner bottom of the equipment at the door side is called the “dead zone”. Water from the “insides” of the equipment does not get here, but dirt accumulates in abundance. That is why you need to clean this area of ​​the dishwasher more often.

After processing the basket with any of the products, let it dry or wipe it thoroughly with a dry towel. Only then can the basket be placed in the dishwasher.

How to clean a filter in a Bosch dishwasher

wikiHow works like a wiki, which means that many of our articles are written by multiple authors. To create this article, 46 people, some anonymous, worked to edit and improve it over time.

The number of sources used in this article: 5. You will find a list of them at the bottom of the page.

Many of us don’t often think about the need to clean the dishwasher. After all, if the dishes get clean, then the dishwasher gets clean too? Unfortunately, small debris and leftovers that build up over time will degrade its performance. If it’s time to clean your dishwasher, start at Step 1 below.

Examine the bottom of the dishwasher around the drain hole. There should be a grid or lattice around it, under the carousel. Dirty water goes there. Look at the trash that clogs up this place. Remove the accumulated hard pieces, especially pieces of paper, pieces of broken plates, small stones, etc. If you think that something has fallen inside, you will have to disassemble the parts a little to remove all the debris.

http: // ru. wikihow. com /% D1% 87% D0% B8% D1% 81% D1% 82% D0% B8% D1% 82% D1% 8C-% D0% BF% D0% BE% D1% 81% D1% 83% D0% B4% D0% BE% D0% BC% D0% BE% D0% B5% D1% 87% D0% BD% D1% 83% D1% 8E-% D0% BC% D0% B0% D1% 88% D0% B8 % D0% BD% D1% 83

How to clean the inside of a dishwasher?

The interior of the dishwasher is more prone to dirt than the outer shell. It is here that the working process takes place, and all the plaque from hard water, detergent and food residues remains on the details of the equipment. The result is a decrease in work efficiency. You can avoid such troubles in the following ways:

How can you clean the filter

There are several ways to clean the filter in the dishwasher:

• With dishwashing detergent and cleaning powder. They can be applied using an old toothbrush, then thoroughly rinsed with running water, if necessary, the procedure can be repeated.
• Another effective remedy for fat loss is baking soda. It can be used with table salt, which can also help cleanse greasy stains. But it is better to dilute the powder with water and apply the gruel with a dishwashing sponge, then rinse.
• The last method, which will help not only get rid of fat, but also from limescale, is citric acid; for this, the part should be soaked in a solution for several hours, then washed with soapy water. Vinegar works in a similar way. If there is no citric acid, it will completely replace it.

If the filter is not too clogged, you can fix the problem with soapy water and a sponge. After cleaning, rinse the filter thoroughly and then dry it. But before you put it in place, you should also clean the inside of the machine, be sure to rinse all the parts.

It often happens that the filter, which is located on the water supply valve, becomes clogged. Cleaning it, albeit not too often, should not be forgotten. The water that passes through it every day is not of high quality. It can contain a lot of salt or lime. Rust particles sometimes get out of the pipes. If the dishwasher filter was not cleaned in time, water will be drawn up much more slowly.

Prevention of how to wash the dishwasher

Sanitary and hygienic procedures will not take much time if you follow some rules

You need to pay attention to the hose responsible for the release of water. Every 2 months it should be cleaned with a soft brush and rinsed

So that at the end of the month you do not have to literally rip off all kinds of contaminants, you should inspect the dishes before each wash. The surface is freed from large and not very food debris, otherwise the mechanical parts of the product will quickly fail.

In addition to the listed tips, there are a number of other

How to clean Bosch Dishwasher for Maximum Efficiency. Bosch Dishwasher Maintenance

• Each machine has a weight limit. an indicator that characterizes the ability of a dishwasher to wash a certain amount of dishes. You can not even slightly exceed it.
• Even the most expensive unit will not be able to wash the dishes if the wrong cleaning agent is selected. This must be purchased taking into account the characteristics of the dishes themselves, the prevailing types of contamination and the manufacturer’s recommendations.
• Before starting work, the sections for the brine salt should be checked. It is forbidden to turn on the dishwasher if the listed elements are in insufficient quantities.
• The dishwasher must be rinsed regularly. This can be done in manual or automatic mode, depending on the model. For example, Bosch cars in the middle price segment can be flushed by pressing a few keys. The main thing is to choose a substance recommended by the manufacturer for the specified procedure. It is better to refuse “popular” methods, otherwise you can lose warranty service.

Basic rules of care

When using this household appliance, please adhere to the following guidelines:

• To keep your dishwasher in good health, check your water inlet hoses more often. Clean them with a toothpick if necessary.
• Dry the rubber gasket in the door once every 2 months.
• Before washing, be sure to clean the dishes from food debris. Try not to overload the car.
• Choose the right dishwasher cleaner to keep your dishes sparkling clean. Check if the slots for brightener and salt are well filled.

To make cleaning the dishwasher easy and not out of order, please note that the following dishes cannot be washed in it:

Cleaning the blades of a Bosch dishwasher

Since we have started repairs, it will be good to clean the blades at the same time, namely, the holes in them are also clogged with food debris, which sometimes need to be cleaned so that the machine works properly.

Remove the upper blade for this we twist a special “lamb” half a turn counterclockwise.

Under the pressure of hot water, we clean the holes with an ordinary match or a toothpick.

The lower blade rests on four latches, two on each side, carefully unfasten it, pulling it up, also clean it and put it in place.

Now it is possible to check the result of the work performed. If you don’t know how to reset the remaining time on your model, then just pour a couple of liters of water and then boldly turn on a Bosch dishwasher or any other.

She must pick up the cycle started earlier and finish it as it should be, draining the water into the sewer, which will be a successfully completed repair with her own hands.

We watch a video about the advantages of a dishwasher, as well as how to load the dishes correctly.

Inlet filter

The mesh can be cleaned by disconnecting the inlet hose from the PMM body. If the part is clogged with limescale, put it in water with the addition of citric acid for a while. It is recommended to clean the mesh at least once every six months.

Spray

• The lower rocker arm is located near the drain filter.
• Scroll it and remove it from the seat. On some models, you may need to press down on the clips.
• Rinse the part with water. Additionally, the nozzles are cleaned with a toothpick.

Be sure to inspect the top spray and its openings. Sometimes limescale builds up in the holders to which the spray arm is attached.

How to remove limescale, grease and blockages using traditional methods

That is, for six months of operation, the hose, drain or filter has never been cleaned. Then I had to remind the woman once again about the frequency of “hygiene” technology and talk about an effective folk remedy against scale, which every housewife can find in her kitchen. You can effectively remove scale at home with citric acid. To do this, you need 200-400 grams of acid, which must be poured into the dishwasher, after which you must start the normal dishwashing cycle. Literally a few days later, the customer came with an apology and thanked for the helpful advice.

If you do not want to get into the same awkward situations, then you should be more attentive to the technique and take note of several popular methods of cleaning the dishwasher from scale, grease and clogging.

• As you already understood, the first remedy is citric acid. It perfectly removes limescale, blockages in the drain and greasy build-up on important elements. The only rule when using such a “hot” product is to re-rinse the device in the normal wash mode to completely remove the lemongrass residues.
• The second option is lemon juice. In order to get rid of the fat on the door and elastic bands, it is enough to squeeze out the juice of 3 fruits and wipe the indicated elements with it, then wipe them dry.
• Another effective remedy for limescale and blockages is vinegar. To clean with vinegar, you will need to pour 400 ml of the product into the bottom of the basket, turn on the unit for heating the water, start the device and stop it for about half of the cycle. If the blockage is minor, you can continue the washing process after 30 minutes. If you need to get rid of the blockage more seriously, then leave the machine in this state overnight, and in the morning finish the cycle.
• The riskier method is bleach. If the internal parts of your dishwasher are made of stainless steel, then you will have to give up this product right away. If not, know that bleach is a great way to fight mold. To do this, pour 200 ml of the solution into the dishwasher and start a full cycle of washing at a high temperature.

Do not forget about the prevention of fatty inclusions, unpleasant odor, scale. “Fairy”, “Fairy Platinum” (soda tablets), “Anti-scale” or “Finish” for dishwashers can help you with this.

Remember that poor performance or equipment failure is often caused by improper maintenance. Hopefully, after reading this article, you will start taking care of your dishwasher harder and be able to clean it yourself inexpensively. By the way, do not forget about your other friends from the world of technology, for example. Subscribe to updates, invite friends and always be the first to know the news of the world of technology.

How to eliminate the causes yourself

Each of the breakdown options has its own simple solutions, which you can try to cope with yourself. Before starting repairs, you must carefully read the instructions for the machine, and unplug the power cord from the outlet. Then remove the drain hose from the sewer and lower it into the bucket. If the liquid suddenly poured out in a sharp stream, then the most likely cause of the blockage is a clogged sewer or drain. If the water still remains in the dishwasher, you need to look for the cause further, having previously collected it by hand and draining the internal tank.

Kinked drain hose. During general cleaning in the apartment and direct care of the unit itself, its location may temporarily change. Therefore, the drain hose can bend anywhere and prevent the water from flowing freely. You need to carefully examine it for correct installation and correct the situation.

Sometimes the hose becomes clogged with mechanical debris (bones, solid food particles) and loses its capacity. Then you need to disconnect it from the dishwasher and remove it from the connection to the sewer and rinse under a strong pressure of water.

Poor water pressure. If there is a poor pressure in the urban water supply system, then it will enter the device in insufficient quantities and can cause a general failure in the operation of the electronic module. The wash cycle will not start correctly and the sequence of commands may not be correct.

Sewerage blockage in the apartment. If the device has a common outlet with a sink and water does not drain well from there, then you need to try to remove the mechanical blockage using special chemicals such as “Mole” or a cable to clean the sewer system. Most often, the root cause of poor water drainage in such cases is pipes clogged with plugs from hair, frozen fat or food debris.

A blockage in the common sewage system in an apartment or private house will also prevent the direct outflow of water. It is very simple to understand this. not only water does not drain from kitchen equipment, but, in general, everything in the house.

The drain filter is clogged. Almost always, home appliance users ignore the manufacturer’s recommendations for use. The appliance is not properly maintained and this leads to a malfunction. In the case of using a dishwasher, the manufacturer strongly recommends to clean the cutlery before placing it from particles of non-eaten food. Otherwise, they strongly clog the fine mesh of the internal filter and prevent the waste fluid from draining. This problem is easy enough to deal with. You just need to get out the removable filter, clean it under running water and reinstall it.

Blade clogging is most often due to the poor quality of city water. When it is very hard, the small outlets are clogged with limescale and the water flow gets in the wrong place. It is necessary to remove the blades, clean them with a toothpick, rinse them under a strong stream and insert the impeller back.

Drain pump clogged. When the internal drain is clogged, water stays in the internal tank and does not come out through the drain hose. If all of the above measures do not help, then the cause may be in the drain pump. You can find its location by carefully studying the instructions. Unscrew the protective cover and try to rotate the pump blades with a stick or pencil. When the stroke is difficult, it is worth trying to remove the foreign object and screw the pump back.

Deciphering the e25 code on the dishwasher display. more details in our article.

Lemon acid

It will help in the fight against scale. Pour 300 g of acid into the machine and run at full power.

To keep your kitchen appliances in good working order, you need to know how to clean your dishwasher at home. The answer to the question must be found in the operating instructions for the device. The manufacturer lists the detergents and cleaning agents that are permitted. Budget models, unlike automatic ones, are subject to exclusively manual cleaning. It should be remembered that you should not rely entirely on automation.

During the first month of operation, the inner surface of the device is covered with a layer of fat. If it is not promptly cleaned, then after a few weeks you will need to contact the service center. In most cases, maintenance is carried out using a limited list of substances, the use of which inside the unit will not harm it. Unfortunately, not everyone is in a hurry to get acquainted with it. As a result, the number of equipment failures increases.

The first thing that the hostess must remember is that you should not take harsh chemicals and acids. Even if marked “delicate”, the reagent can still damage the inner surface. The second rule concerns the amount of substance used. Jewelry accuracy is the key to a long-lasting dishwasher health.

The following tips will help you avoid many problems during the practical operation phase:

• It is recommended to ventilate the unit after each use. this reduces the rate of formation of fatty deposits;
• The thicker the layer of fat inside, the less you can dry the dishes;
• After the end of sanitary measures, the “insides” of the machine must be dried for at least 40 minutes, otherwise mold will form.

How to clean Filter in Bosch Dishwasher for Maximum Efficiency. Bosch Dishwasher not draining Water

Regularity and consistency are the keys to a healthy dishwasher. You can get rid of fat using the recommended list of substances. They are poured into a specially designated tank, after which the “cleaning” mode is activated. The main thing is to quickly remove fat deposits that can harm the mechanical elements of the device.

Cleaning the filter in the dishwasher from clogging. drain and inlet

The inlet and drain filter need monthly cleaning. If you do not follow the rules for caring for the PMM, it can stop work and give a malfunction code on the display. Every user should know how to clean a dishwasher filter. We have compiled detailed instructions so that you can carry out preventive maintenance on time and avoid problems and breakdowns.

Filter design and causes of clogging

Once you have bought and installed the equipment, carefully study the instructions for use. it indicates where which elements are located. A drain or drain filter is located at the bottom of the hopper, in a sump next to the sprayer. Before starting the dishwasher for the first time, examine it to know how it is dismantled and cleaned.

• fine metal mesh;
• outer coarse mesh in the form of a glass to retain large particles;
• inner mesh, which is located under the outer plastic “glass”.

Dishwashers Bosch (Bosch), “Electrolux” and other brands are equipped with a filtration system to protect the main mechanisms from foreign objects. Most often, the system becomes clogged with food debris, small debris, napkins, and fat. As a result, the waste water does not go into the drain, the machine stops working.

If you untimely clean the filters, then a foreign object can get into the pump impeller, circulation pump and block the PMM operation. Or even cause them to break.

The filling system may not allow water to pass through if the mesh at the valve inlet becomes clogged with scale. Let’s figure out how to clean elements from grease and debris.

Interesting! Some models are equipped with a self-cleaning function. Therefore, if you do not have a desire to prevent blockages every two months, pay attention to these characteristics of PMM when buying.

How to clear filters

Depending on the brand of the dishwasher, the drain filter may differ in shape, size, and method of attachment. In some models, it is enough to twist the part and pull it out of the hopper, in others you will have to unscrew the fastening screws. We will describe the general sequence of actions:

• open the tank door;
• remove the lower basket for dishes;
• unscrew the external filter and take out the fine mesh.

After you have taken out the element, proceed with cleaning. There are several options:

• Mix dish gel and cleaning powder. Apply the mixture with an old, soft brush. After cleaning, rinse the parts thoroughly with running water.
• Soda will also help you get rid of fat. Mix it with fine table salt. Apply the product with a dish sponge, then rinse under pressure from the tap.
• Citric acid or vinegar can help remove limescale. Soak the parts for a while in their solution, then rinse with water.

Also check the pump impeller, which is located behind the filter. Do this:

• Scoop water out of the container where the pump is located. To do this, use a sponge.
• Pull the shutter out to the side and then towards you. Put the lid aside.
• Check impeller for blockage, clean.

Clean the inside of the hopper. This can be done with your hands, with a brush and detergent. Or run the dishwasher dry using a special product.

How to properly clean your dishwasher. read in our article.

Turn off the water to tidy up the inlet mesh filter. Disconnect the intake hose from the PMM, remove the mesh. How to remove limescale, we described above.

If the filter is damaged, it is easy to replace it.

Now you understand how important it is to clean your compact, built-in and freestanding dishwasher on time. After the end of the cycle, check the filter to make sure it is not clogged. Then the technique will work without interruption.

Cleaning the dishwasher filter

If you asked the question: “How to clean the filter of a Bosch dishwasher?”, Then something does not suit you. Perhaps an unpleasant odor appeared, the car began to drain badly, etc. In any case, if the task is to clean the filter of a Bosch dishwasher, you can be sure. it is very easy to do it.

First you need to understand where the dishwasher filter is and how to get it out for washing. The filter in the dishwasher is located at the bottom (bottom) of the washing chamber and can be easily removed for cleaning and maintenance. To clean the filter, you can refer to the instruction manual of the device or watch our short video below.

Grasp the protruding part of the filter and turn it according to the arrows, then pull it up and out of the wash cabinet completely. In most models, the filter consists of several parts: a metal perforated plate, a frame and a mesh cylindrical filter. Disconnect all parts of the filter (by pressing on the special clips) and rinse thoroughly under running water. If necessary, use a cleaning brush and a few drops of dishwasher detergent to clean the dishwasher strainer. After cleaning, reconnect all filter parts in reverse order, put the filter back in place and do not forget to fix it by turning in the direction of the arrows on the filter itself.

If you find a problem with your dishwasher, you can invite our specialist to your home, and we will find and fix the problems that have arisen quickly and professionally. Bosch 24-hour support phone: 8 (800) 200 29 61

Cleaning the dishwasher filter

Looking for one of these categories?

Bosch 24/7 customer service will answer all your questions.

Make a call to a large equipment repair specialist at any time convenient for you.

Download the instruction manual or get answers to frequently asked questions.

Find out more about our extended service program for the next year or two after the end of the factory warranty.

Subscribe to official Bosch communities!

Cleaning the dishwasher dust filter

In different dishwashers, the drain filter located at the bottom of the wash chamber looks about the same.

A filter is not one piece, but a whole filter assembly. Usually, there are several details in its design:

• fine-mesh internal fine filter,
• internal coarse filter,
• external filter mesh,
• supporting details.

Finding the filter is easy when you take all the baskets out of the machine. It is located under the sprinkler of water, resembles a glass inserted into the bottom.

Removing the filter is also easy. it can be unscrewed clockwise or simply pulled out of the slot without any problems.

Attention! Before removing the cleaning filter, disconnect the appliance from the electricity! If there is waste water on the bottom of the machine, collect it with a cloth.

After removal, the filter can be easily disassembled into components and washed under running water.

If the contamination is significant, it is allowed to use chemical and natural detergents:

• laundry soap,
• dishwashing gel or powder,
• baking soda,
• table salt,
• vinegar,
• citric acid solution.

Food debris and fat are well removed with brushes (including an old toothbrush), toothpicks. You can pre-soak the filter in a cleaning solution for several hours to make it easier for yourself.

The more often the dust filter is cleaned, the easier and faster it is.

After the filter is washed, it is installed in the reverse order into the slot.

Along with cleaning the filter, it is recommended to remove dirt from the entire washing chamber (especially its bottom), as well as water sprinklers.

All dishwasher manufacturers in the instructions for the unit describe the procedure for cleaning the filter unit. If you are in doubt about your actions, check the instructions.

Note! If you notice damage to the filter (chips, cracks, etc.), it is advisable to replace it with a new one.

Filter design and causes of clogging

Once you have bought and installed the equipment, carefully study the instructions for use. it indicates where which elements are located. A drain or drain filter is located at the bottom of the hopper, in a sump next to the sprayer. Before starting the dishwasher for the first time, examine it to know how it is dismantled and cleaned.

• fine mesh metal mesh;
• outer coarse mesh in the form of a glass to retain large particles;
• inner mesh, which is located under the outer plastic “glass”.

Dishwashers Bosch (Bosch), Electrolux and other brands are equipped with a filtration system to protect the main mechanisms from foreign objects. Most often, the system becomes clogged with food debris, small debris, napkins, and fat. As a result, the waste water does not go into the drain, the machine stops working.

If the filters are not cleaned in time, a foreign object can get into the pump impeller, circulation pump and block the PMM operation. Or even cause them to break.

The filling system may not allow water to pass through if the mesh at the valve inlet becomes clogged with scale. Let’s figure out how to clean elements from grease and debris.

Interesting! Some models are equipped with a self-cleaning function. Therefore, if you do not have a desire to prevent blockages every two months, pay attention to these characteristics of PMM when buying.

How to clean the dishwasher filter

All dishwashers have two water filters.

The first is a filter for a water supply valve or a bulk one. It cleans tap water, which is poured into the unit, from sand, metal salts and impurities contained in it.

The second filter purifies the waste water drained from the dishwasher. It prevents blockages in the drain hose and circulating pump, as well as in the general sewage system.

How are the dishwasher inlet and return filters cleaned? What difficulties can you face??

Cleaning the filter in the dishwasher from clogging. drain and inlet

The inlet and drain filter need monthly cleaning. If you do not follow the rules for caring for the PMM, it can stop work and give a malfunction code on the display. Every user should know how to clean a dishwasher filter. We have compiled detailed instructions so that you can carry out preventive maintenance on time and avoid problems and breakdowns.

Why is it important to clean the filter on time

Before loading into the dishwasher, dishes and utensils must be cleaned, ideally rinsed in warm water.

But, since ridding the dishes completely of all contaminants would mean washing them, further use of the dishwasher loses all meaning.

Small particles of dirt will remain on the dishes before placing them in the dishwasher in any case. But large ones must be removed in advance.!

After starting the program, the dirt from the plates and pans is washed off with water and special detergents at the bottom of the washing chamber. It is there that the drain cleaning filter is located, which is often called “trash”.

Retaining particles of food, grease, napkins and other debris, as well as detergents, the cleaning filter gets dirty very often and quickly.

Given the importance of keeping the drain filter clean, some home appliance manufacturers are already making dishwashers with self-cleaning filters.

It is recommended to clean the conventional filter yourself every time after completing the next washing cycle.!

If you do not have extra free time, clean the filter at least once every 2 weeks. 2 months (if you rarely use the unit).

Dirt and blockages in the filter provoke such malfunctions of the dishwasher “helper”:

• the water is slowly drained, the wash cycle is extended,
• water does not drain at all, remains in the unit,
• water flows through the door,
• dishes are not washed out, remains dirty, stained and stained,
• the machine makes a louder noise, makes abnormal sounds,
• an unpleasant odor appears, harmful microorganisms multiply in the washing chamber.

Timely cleaning saves not only the filter itself, but also all other parts of the unit! After all, the motor, pump, heating element and other important components, in case of improper functioning of the filter, have to work for wear.

So, cleaning the trash filter and unclogging it is a preventive measure that prevents most of the possible breakdowns of dishwashers! This is why it is so important to clean the filter in a timely manner.!

Dishwasher filter cleaning. Bosch, Electrolux

Cleaning the Dishwasher Filters

The filter of the water supply valve gets clogged much less often than the trash one, but this part also needs to be paid attention.

The more dirty and “hard” water flows through the pipes, the more often the filler is removed and cleaned.

Due to blockages in the filter and the breakdown of the water inlet valve often provoked by them, the dishwasher stops picking up water or does it very slowly.

To clean the bulk filter, you need:

• De-energize the unit and shut off the water supply.
• Unscrew the inlet hose.
• Remove the mesh filter from the slot.
• Rinse the filter under running water.
• Reinstall the part.
• Screw on the hose.

This is a general scheme for cleaning the bulk filter. For the exact procedure, based on your dishwasher model, refer to the instruction manual for your dishwasher.

Many modern smart dishwashers remind their owners to clean the trash and filler filters by displaying the corresponding error codes on the control panel. So the technique protects itself and you from possible breakdowns caused by dirt and blockages.

If an error code occurs, indicating a blockage in the filter, cleaning measures will have to be carried out urgently. In especially difficult situations, you cannot do without the help of a specialist!

If you have any difficulties with cleaning the filters or any of them is out of order (replacement is required), invite an experienced and certified master VseRemont24 to your home.!

Unclogging your Electrolux dishwasher

The dishwasher in the modern world is one of the main helpers around the house. Firstly, she does all the “dirty work” for you, and secondly, she significantly saves the hostess’s precious time. Unfortunately, the technique does not last forever and stops working at the most inopportune moment, but you should not immediately be upset. The specialists of the “Golden Hands” company are ready to repair your unit on the same day. Our masters undertake the repair of a dishwasher of any brand and complexity, using only original spare parts in their work. Dishwasher repair is done at home, which is very convenient. No need to waste time and money on transporting equipment to the workshop.

This text provides a detailed photo report on the problem:

Why does the Electrolux dishwasher not drain water??

Understanding why the Electrolux dishwasher won’t drain.

• Clogged drainage areas;
• Control board defective;
• It’s about the pump;
• The reason is the pressure switch.

Electrolux dishwasher diagnostics.

Our master went to the address for the repair of equipment.

The specialist examined the machine from the outside, “rang” all the internal parts.

For the correct operation of the dishwasher, it was required to remove the blockage.

Unclogging the Electrolux dishwasher.

• The master removed the lower grill;
• Disconnected the “sump” and the filter;
• Cleared the blockage;
• Flushed the drain with a special agent;
• Put all parts of the dishwasher back in place and put it back on.
• Everything works now!

Attention! The device of the dishwasher is not simple and self-repair can harm the technique even more.!

• Completely clean the dishwasher a couple of times a year;
• Clean the dishes from food debris before loading into the unit;
• Take breaks between wash cycles;
• Do not overload the machine.

If a problem occurs, please contact us!

You can leave an application in any convenient way:

• Just call the above numbers;
• Leave an online application on the site. The operator will call you himself.