How to Cut Paving Slabs Angle Grinder

How to cut paving stones

When calculating how much tile and what additional materials you will need for laying a certain area, consider all the nuances. The first question that arises when such actions are necessary is how to cut paving slabs?

How to Cut Paving Slabs Angle Grinder

If the shape of the square, paths in the garden, or something else of a regular rectangular or square shape, then the more or less exact number of tiles you need for masonry, you will easily calculate.

Features of the cutting process

If the shape of the square, paths in the garden, or something else of a regular rectangular or square shape, then the more or less exact number of tiles you need for masonry, you will easily calculate.

Also, provided that the shape of the pavers corresponds to the shape of the area, then the technology for calculating and laying will not take much time.

Experts advise adding to the basic calculations plus five percent, in this case, tiles for masonry will be enough for sure.

All materials must be prepared in advance. The mentioned five percent usually go to battle and marriage, this is normal for styling.

If the proposed shape of the square is round, oval, generally non-standard, then in addition to the usual five percent, which is added just in case, you need to add a percentage that will go to cut pavers.

They do this for places where for masonry, a “manual debugging” is required, there are quite a few such places. Usually cutting tiles “for manual finishing” is not the smallest part of the laying process.

Cobble cutting by manual tile cutter, electric tile cutter, glass cutter is not performed. All these tools are suitable for ceramic tiles.

In order to cut the paving slabs, you can use the angle grinder with a diamond blade.

Such an angle grinder, i.E. Angle grinder cutting paving slabs is quite simple.

You don’t need any special training or certain skills, you just need to use certain recommendations, and then the cutting will go like clockwork.

First of all, you need to take care of protective equipment. When working with an angle grinder, when cutting, a huge amount of dust is released, so you will need a respirator and safety glasses to protect your eyes from dust.

First of all, you need to take care of protective equipment. When working with an angle grinder, when cutting, a huge amount of dust is released, so you will need a respirator and safety glasses to protect your eyes from dust.

It is good if you also use headphones to protect yourself from loud noise. The materials from which the worker’s clothing is made must be sufficiently dense.

The most important point is caution. The diamond disc angle grinder rotates very quickly, so you need to carefully and accurately cut, save your fingers.

Having taken care of the equipment, you can get to work.

The process technology is not complicated, therefore, as soon as you come to the masonry area where cut tiles are required, immediately get down to business.

To get started, choose a tile that you think is strong enough. Otherwise, it may just crumble.

Draw clear lines, after measuring very accurately the desired shape.

It is necessary to cut strictly according to the drawn line, since paving slabs are usually small in size and shape, this will be simple. At the same time, it is impossible to press the angle grinder on the paving slab, so you can let it out of your hands.

If the cutting process is difficult, then you can use the sprinkling of paving stones with ordinary masonry sand, but not too much, as this can add an extra slip to the angle grinder, which is quite dangerous.

For cutting the angle grinder of paving pavers, you need to allocate a special place and preferably one permanent person, the equipment of which will be suitable for him in size, since the dust can climb into the smallest gaps.

For cutting the angle grinder of paving pavers, you need to allocate a special place and preferably one permanent person, the equipment of which will be suitable for him in size, since the dust can climb into the smallest gaps.

A special place is needed so that the dust does not fall on the rest of the tile. This is fraught with the fact that you can completely ruin the color of the tile. If this nevertheless happened, then sweep away the dust, you need a hard brush without hesitation, since it very quickly eats into the tile and spoils its color.

It should also be taken into account that when dust gets on a wet tile, this happens much faster. This will be especially noticeable if the tile is different in color, in which case it can be hopelessly damaged, and the only way out is to replace it and re-lay. Be careful not to get dust on cars and other objects near you.

You can also use a guillotine knife to chop paving slabs. The technology here is completely different, paving stones are not cut, but pricked, and the work is done without noise and dust. You just need to insert the tile and lower the lever.

READ  Changing The Lubricant In The Gearbox Angle Grinder

The materials necessary for laying the site in your garden, in this case the same ones will be needed. By the way, you can store prepared materials right in the garden or on the street, nothing will happen to them.

After laying the cut pavers, it is necessary to tamp, for this, an area or roller vibrator is used. The vibrator should be with rubber tips. The surface of the path in the garden or some other area is rammed to full shrinkage. You need to drive the vibrator from the edge to the center of the coating.

How to cut paving slabs right angle grinder. Right answers. Kakpravilno-Sdelat.Ru

During the working process, you often have to cut the paving slabs or curb: somewhere you need to adjust the height, and somewhere the width of the product. There are only two effective methods of trimming: using an angle grinder and using a guillotine for bricks, pavers. The guillotine is used for work where you need to cut in a straight line and where small irregularities are allowed. For, so to speak # 171; jewelry # 187; pavers processing, already use angle grinder.

Getting ready for the pruning process.

If you will work with an angle grinder, then for safety reasons it is recommended to use safety glasses and headphones # 8212; glasses will protect your eyes from possible flying fragments, and headphones will protect against loud noise. When working with the guillotine, there is no need for all this equipment.

Mark

Before you start cutting paving slabs, you need to put a mark (fishing line), on which the paving stones will be cut. For this, we need a construction pencil and a ruler. Using a ruler, you need to measure the distance that you need to leave or remove and transfer it to the tile. If it is a straight line, then two points will be sufficient.

Mark so that after trimming it does not work out too much space between the tiles or vice versa, so that the tiles do not interfere. Therefore, you need to make a small margin and cut exclusively along the drawn line.

Paving slabs angle grinder

A diamond wheel for concrete should be installed on the angle grinder. The circle should rotate on you, so that dust and debris fly away from you. Hold the angle grinder with both hands and spread your legs so that if the angle grinder jumps off the tile, it does not fly into the leg. Can be located behind the angle grinder, but can be on the side.

Fold the trimmed tiles separately, discard the garbage immediately. If the tile is of different colors, then you also need to separate it. In order not to be confused and know where the tile was cut, make marks on it.

Dust from cutting can scatter and fall on the tile, so find a suitable place in advance or cover the tile. Dust can be removed from paving slabs, but if the tiles are pressed, it will be problematic to do this. Therefore, think over these organizational issues in advance.

Guillotine Tile Cutting

With the guillotine there are much less problems and garbage, but it is less accurate. As mentioned above, the guillotine can cut tiles only in a straight line. It is silent and does not require serious precautions.

Nevertheless, the most popular and affordable tool remains the angle grinder. The guillotine is used when the scale of work is large and pruning is not distinguished by its variety and complexity. For such purposes, the guillotine is simply an indispensable tool.

Post navigation
Add a comment

How to cut paving slabs. Tips and techniques

Trimming of paving slabs is not uncommon during its improvement of the territory of a country house: sometimes adjustment of height or width is required. Particularly relevant is the problem of trimming in the case of oval paths or the presence of their curves. Everyone decides for himself what to cut paving slabs with, # 8212; there are two ways: how to cut paving slabs with an angle grinder, and using a guillotine.

Tip. When purchasing tiles, add a margin of 5% for a possible fight, marriage, and for training.

  1. The first step in cropping will be marking with a pencil and a ruler. You can use chipped, but durable tiles.
  2. Marking the entire tile and its laying.
  3. Direct pruning.
  4. Trimming with an angle grinder (the power of which must be at least 2 kW) is performed if more accurate and accurate work is necessary. When working, it is mandatory to use headphones and safety glasses in order to prevent splinters from getting into your eyes and protect your hearing from loud noise. With heavy cutting, you can periodically sprinkle the tile with sand.

For cutting, a diamond wheel is installed on the angle grinder with the direction of rotation opposite to the face. It is necessary to hold the angle grinder, standing either behind it or from the side, strong pressure on the saw is not allowed. The tile must be protected from dust (covered), otherwise it will be very difficult to remove dust from the pressed tile.

Guillotine trimming is used in the case of tolerance of small irregularities in work. Eye and hearing protection is optional, and there is much less debris than after working with an angle grinder. In this way, you can cut tiles only in a straight line.

READ  What Angle Cut Baguette

Tile cutting guillotine

Sanding with uneven edges with emery paper or chipping defects with a chisel.

A good example of how to cut paving slabs is a of the process of working with the guillotine, see below. This will be a good help in business.

Features of cutting tile angle grinder

  • Necessary devices and safety measures
  • Features of the cutting process

It’s no secret that when laying all kinds of surfaces with tiles in various houses and buildings, it often turns out that the total area that needs to be covered is not a multiple of the size of the tile. From one, and more often from two edges, there are places where the whole tile simply does not fit. And then cutting the tiles into pieces of a more suitable size becomes an urgent need.

Tile cutting patterns.

It is unrealistic to simply chip fragments from the whole tile, since in this case it is almost impossible to predict the shape and size of the fragments in advance. Professional tilers-tilers use special tools for this, but if the tiles are laid on their own and you can’t get access to such tools, then an electric grinder, better known as an angle grinder, will go for cutting.

Necessary devices and safety measures

In general, the tile is cut by an angle grinder in the same way as the cutting of brick, paving slabs or facing stone. First of all, you need to take a special cutting disc with diamond chips, designed for dry cutting on ceramic tiles and stone. The cleanliness of the cut line directly depends on its quality. It is more even and cleaner, the more diamond inclusions in the composition of the substance from which this disk is made. The best discs are those made by the German company # 8220; Boch # 8221 ;, on the edges of the line cut by them, enamel coating chips almost do not appear, but they cost about 20 apiece with a diameter of 12.5 cm.

Scheme of the device angle grinder.

At the same time, Chinese disks of a similar purpose and size are 4 times cheaper, and the cutting quality is not much worse. Cutting the tile with a metal cutting disc is by no means possible, it can be dangerous.

It is worth remembering that cutting tiles using an angle grinder can be accompanied by the risk of injury. To avoid them, there are simple safety measures that are best followed strictly. Firstly, particles inevitably fly off the tile during the cutting process, and given the speed of rotation of the disk, their acceleration in flight is extremely high. If they get into the eyes, they enter so deeply that it is practically impossible to remove them without surgical intervention. Therefore, goggles or a transparent mask must be on the face. Secondly, the disk should only go one-third of its diameter into the surface of the tile, at least half. Otherwise, the angle grinder may twitch and fly out of hand. This is fraught at best with damage to the tiles, and in the worst and most serious injury to the hand. Traumatic safety measures must be kept in mind at all times.

Features of the cutting process

For the layman in the facing business, it is worth informing several useful rules, if you observe which, cutting tiles using an angle grinder will be quite easy.

Scheme of correct cutting tiles.

  1. Cut line should be carried out on the front side of the tile. This significantly reduces the size of the chipped fragments of the enamel coating.
  2. During the cutting process, the angle grinder must be held so that the direction of rotation of the disk is in the opposite direction from the working side. Then the fragments will not fly into it.
  3. After some time, during the cutting process, particles of molten metal form on the cutting edge of the disk, and it begins to slide over the surface of the tile. To remove them, you need to lightly walk a working angle grinder on a concrete surface. Then the melted metal will fly off, and again the surface with diamond chips will be exposed.

To avoid the appearance of fine ceramic dust around the snowdrifts, and to simply facilitate the process, you can take a plastic canister with a capacity of 5 l and cut off one of its walls. Then, on one edge, you can lean the body of the angle grinder, and on the other tile, which needs to be cut, and direct them towards each other. The direction of rotation of the disk should be down into the canister, where all the dust and fragments will fly. However, for this movement must be accurate, otherwise the tile will simply burst. If there is no necessary skill for such work, then it is best to install the angle grinder motionless, and all maneuvers should be made with a lighter tile. In addition, this will free them and the second hand.

The body of the angle grinder can be wound with adhesive tape vertically to the table leg in such a way that the cutting part of the disk rises above its surface. Then, an external countertop is made with a slot for the disk on which the tile will be laid. It turns out a kind of constructive similarity to a circular saw.

In another case, the angle grinder is placed on the table horizontally and fixed with two clamps. The cutting disc should extend completely beyond the edge of the table. The tile will be brought to him in weight with both hands. The cutting process will be much safer and save a considerable amount of tile, if you take an angle grinder for it, on which there is a function of switching speeds.

READ  How To Check The Rotor Angle Grinder

Then the angle grinder can quite effectively replace a special tile cutter.

Sources: https://tvoyaplitka.ru/chem-i-kak-rezat-trotuarnuyu-plitku-i-bordyury.html, https://trotuaplitka.ru/chem-rezat-trotuarnuyu-plitku-sovetyi-i-metodyi. Html, https://moiinstrumenty.ru/rezhushhie/rezka-bolgarkoi-plitki.html

No comments yet!

How to cut paving slabs. Tips and techniques

Trimming of paving slabs is not uncommon during its improvement of the territory of a country house: sometimes adjustment of height or width is required. Particularly relevant is the problem of trimming in the case of oval paths or the presence of their curves. Everyone decides for himself how to cut the paving slabs. There are two ways: how to cut the paving slabs with an angle grinder, and using the guillotine.

Tip. When purchasing tiles, add a margin of 5% for a possible fight, marriage, and for training.

  1. The first step in cropping will be marking with a pencil and a ruler. You can use chipped, but durable tiles.
  2. Marking the entire tile and its laying.
  3. Direct pruning.
  4. Trimming with an angle grinder (the power of which must be at least 2 kW) is performed if more accurate and accurate work is necessary. When working, it is mandatory to use headphones and safety glasses in order to prevent splinters from getting into your eyes and protect your hearing from loud noise. With heavy cutting, you can periodically sprinkle the tile with sand.

For cutting, a diamond wheel is installed on the angle grinder with the direction of rotation opposite to the face. It is necessary to hold the angle grinder, standing either behind it or from the side, strong pressure on the saw is not allowed. The tile must be protected from dust (covered), otherwise it will be very difficult to remove dust from the pressed tile.

Guillotine trimming is used in the case of tolerance of small irregularities in work. Eye and hearing protection is optional, and there is much less debris than after working with an angle grinder. In this way, you can cut tiles only in a straight line.

Tile cutting guillotine

Sanding with uneven edges with emery paper or chipping defects with a chisel.

A good example of how to cut paving slabs is a of the process of working with the guillotine, see below. This will be a good help in business.

How and how to cut paving slabs and borders

During the working process, you often have to cut the paving slabs or curb: somewhere you need to adjust the height, and somewhere the width of the product. There are only two effective methods of trimming: using an angle grinder and using a guillotine for bricks, pavers. The guillotine is used for work where you need to cut in a straight line and where small irregularities are allowed. For, so to speak, “jewelry” processing of paving stones, an angle grinder is already used.

Getting ready for the pruning process.

If you are working with an angle grinder, then for safety reasons it is recommended to use safety glasses and headphones. Glasses will protect your eyes from possible flying fragments, and headphones will protect against loud noise. When working with the guillotine, there is no need for all this equipment.

Mark

Before you start cutting paving slabs, you need to put a mark (fishing line), on which the paving stones will be cut. For this, we need a construction pencil and a ruler. Using a ruler, you need to measure the distance that you need to leave or remove and transfer it to the tile. If it is a straight line, then two points will be sufficient.

Mark so that after trimming it does not work out too much space between the tiles or vice versa, so that the tiles do not interfere. Therefore, you need to make a small margin and cut exclusively along the drawn line.

Paving slabs angle grinder

A diamond wheel for concrete should be installed on the angle grinder. The circle should rotate on you, so that dust and debris fly away from you. Hold the angle grinder with both hands and spread your legs so that if the angle grinder jumps off the tile, it does not fly into the leg. Can be located behind the angle grinder, but can be on the side.

Fold the trimmed tiles separately, discard the garbage immediately. If the tile is of different colors, then you also need to separate it. In order not to be confused and know where the tile was cut, make marks on it.

Dust from cutting can scatter and fall on the tile, so find a suitable place in advance or cover the tile. Dust can be removed from paving slabs, but if the tiles are pressed, it will be problematic to do this. Therefore, think over these organizational issues in advance.

Guillotine Tile Cutting

With the guillotine there are much less problems and garbage, but it is less accurate. As mentioned above, the guillotine can cut tiles only in a straight line. It is silent and does not require serious precautions.

Nevertheless, the most popular and affordable tool remains the angle grinder. The guillotine is used when the scale of work is large and pruning is not distinguished by its variety and complexity. For such purposes, the guillotine is simply an indispensable tool.