How To Fix The Cutter On The Trimmer
I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post-Soviet space “How to refill a fishing line into a trimmer.” Not many trimmer manufacturers answer this question in their operating instructions. Therefore, it is difficult for ordinary gardeners to figure out how to do this correctly.
I want to start with a brief description of the technical characteristics of the trimmers.
So, trimmers are electric and gasoline. The cutting element of the trimmers can be a fishing line and a knife. The fishing line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and four blade blades. Knives are also plastic and metal.
The feed system of the fishing line from the trimmer is manual, semi-automatic and automatic.
Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line and the number of knife blades according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And this is an additional and significant cost.
Today on the market are trimmers:
With one nozzle. Only fishing line. With two nozzles. Fishing line and three-four-blade knife. With one nozzle. Only a three-four-blade knife.
Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacing the fishing line with a metal cable, or fishing line. But at the same time they do not think about the safety of their and their loved ones, because, as a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave it crippled for life. Using fishing line can and gives a better effect, I have never personally tried it than fishing line for trimmer, but this work has a number of inconveniences: when it comes into contact with solid objects it dissolves or can simply be pulled out of the reel without limit.
So what is called closer to the topic. I give an example of how to fill a fishing line into a trimmer (BOSCH Art 30 trimmer). Everything is very simple. We started.
After you have chosen the fishing line for refueling, you need to cut off the necessary amount of fishing line, because all the fishing line in the skein is not wound into a reel.
Cut off and start winding.
Remove the coil and the protective cover from the coil.
They took off. We fix one end of the fishing line into the gap and carefully and evenly wind the fishing line.
The amount of fishing line should be such that the protective cover of the reel closes and the line on the reel unwinds itself a little.
The second end of the fishing line is planted in the hole on the protective cover.
Next, take the coil and the protective cover of the coil. We sink the end of the fishing line from the reel into the metal hole on the protective cover of the reel. Tighten the fishing line a little.
We put it all on the trimmer. Turn the coil clockwise until it clicks.
Secured. Now connect the trimmer to the network. We put the trimmer in the starting position for the job. Turn on the trimmer. The excess length of the fishing line will be cut off on the cutting blade.
That’s all starting work.
You can watch the
A little tip. Make sure that the fishing line does not come into contact with solid objects when cutting. With this contact, the fishing line will be cut. And since, in this trimmer, the fishing line is not fed automatically, then you have to stop the work each time, remove the reel and re-release the fishing line.
In my trimmer, in addition to the standard line for mowing the lawn, there is still provided a thick fishing line for mowing coarse weeds. It has the shape of a pigtail, i.E. Three fishing lines are tightly intertwined. Such a fishing line has its own reel.
Thick fishing line
It is stored at the top of the trimmer body.
Spare coil storage space
Installing such a fishing line into the reel is very simple. According to the internal circuit inside the reel. We insert the center of the fishing line with a metal mount at the top of the reel, and draw the ends of the fishing line along the grooves and bring it out.
Reinforced Fishing Line
Such a coil is attached to the trimmer as well as a reel with ordinary fishing line.
For a comfortable mowing of vegetation in a personal plot, the optimal choice of trimmer characteristics will not be enough. Both for the electric trimmer and for gasoline lawn mowers, it is necessary to choose the right cutting tool. As such, a trimmer line (cord) or a special knife is used.
The fundamental type of vegetation when choosing what to mow is. For the convenience of the user, the user can choose the type of cord, the type of trimmer head, the method of refueling the cord into it, and select a knife of a certain shape. Therefore, you should familiarize yourself with these characteristics in more detail.
Trimmer LINE (CORD)
The classic cutting tool for all types of tools is a special trimmer line or cord, also sometimes called a string. Its thickness (diameter) ranges from 1.2 to 4 mm. For each trimmer, the maximum cord thickness is indicated, which can be used without overheating of the engine and accelerated wear of the bushings.
In addition to differences in thickness, the trimmer cord also has a different cross-sectional shape: a circle, a polygon (from a tri-to a hexagon), an asterisk, rounded protrusions, etc. In addition, it can twist along the longitudinal axis in the form of a twisted square or spiral round string, have various notches and grooves. All these tricks are designed to increase efficiency when mowing vegetation.
The most versatile is the trimmer line with a round cross-section, which can be used to mow both fresh grass and dead wood. In addition to such a universal cord, manufacturers also produce more specialized fishing line.
Taking into account the fact that the smaller the contact area of the cord with the stem, the greater the force of its impact, a figured cord appeared with a cross section in the form of a polygon or an asterisk with sharp corners. Later, for strength, particles of aluminum began to be added to it.
Square fishing line with a thickness of 2.4 mm will make it easy to cope with thickets of dry weeds and even stalks of raspberry bushes. But the asterisk, on the contrary, is intended for gentle mowing of fresh grass. Due to the profile, it cuts vegetation cleaner, the grass leaves faster after shearing and does not dry out as often as after applying a round fishing line.
A round fishing line in the form of a spiral is considered low noise, but this parameter is relevant only for electric trimmers, since the sound of a running gasoline engine blocks the whistle from any fishing line.
When using a trimmer with a shaped section, its thickness should be taken less than the maximum for this trimmer. This will avoid problems with the supply of fishing line from the mowing head. Fill such a cord in a coil with gloves.
The trimmer fishing line has a variety of colors and in most cases it does not have a functional value. But with some manufacturers, the color determines the diameter of the cord (for example, Stihl) or the properties of the material used (for example, Oregon).
For the manufacture of trimmer fishing line use nylon (polyamide) or polypropylene. Leading manufacturers for the manufacture of cords used PP6 polypropylene. In the line of Chinese origin to reduce the cost, various low-quality polyethylene is often added. But in any case, after prolonged storage, the polypropylene cord becomes brittle. To increase elasticity, such a fishing line should be soaked in water for half an hour before use.
In no case should you use a thin wire or stranded cable as a trimmer cord. Thinking in this case about the strength and wear resistance of the fishing line, they forget that the trimmer string is specially made in such a way as to break off to soften the dynamic impact on the transmission and the tool engine. In addition, the cable and wire still break off. At the same time, broken pieces dispersed to high speed easily pierce leather shoes.
The trimmer head, often also called the mowing head, is a specially designed coil, inside which a cord of a certain length is placed. A piece of cord of 8-15 m is wound on the inner spool, the ends of which are pulled out of the reel to the required length as they wear or break off when they encounter an obstacle that is too hard.
As a rule, for different models of trimmers, certain mowing heads are used, which differ in both the internal structure and the method of attachment. For some trimmer heads, special adapters are available that allow the use of such heads on trimmers of various models and from different manufacturers.
Trimmer heads are usually subdivided according to the type of supply of fishing line to manual, semi-automatic and automatic. In the former, as is clear from the name itself, the fishing line is fed from the head manually. To do this, you will have to stop working, turn off the trimmer and manually extend the ends of the cord.
For the second, it is enough to touch the mower coil on the ground. In this case, by clicking on the impact of a special button, the anchor mechanism is released and the cord is fed due to centrifugal force. The fishing line is lengthened when the trimmer is working.
In the third option, to extend the cutting cord, you just need to reduce the engine speed, then with a subsequent increase in speed, the trimmer line is automatically fed.
As follows from the above description, the mower coil with manual feed of the cord is the most inconvenient, and the mowing head with automatic feeding is the most optimal. However, it did not win much love among users due to the increased, compared with other types, consumption of fishing line. Therefore, the most popular and sought-after semi-automatic trimmer heads.
Also, different models of trimmer heads differ in the way the line is refueled. They can be quick-charging (for example, Shindaiwa Speed-Feed), when there is no need to disassemble the coil for winding a new portion of the cord, and collapsible.
In the first embodiment, you can not remove the mower coil from the trimmer. The end of the cord is threaded through both ears in the reel, then the required amount of fishing line is wound and cut off. Or both ends of a pre-cut piece of cord of the required length are threaded into the corresponding holes and wound.
In the second version, to charge a new portion of the cord, the trimmer coil will need to be removed, disassembled and wound the fishing line on the spool inside. Different models of reels differently disassemble and wind the fishing line. But in all cases, the line must be wound in the direction indicated by the arrow on the body (both ends are in the same direction).
On cheap Chinese mowing heads, the so-called “noun,” such an arrow is often missing. Also, on branded models there can be two arrows in different directions (when it is possible to use them on trimmers with different directions of rotation of the head). In this case, the cord must be wound in the direction of rotation of the shaft (that is, the engine must wind it). If the cord is wound in the wrong direction, then when you hit the button on the ground it will fly out too much.
The opposite is also possible. When a semi-automatic mowing head hits the ground, fishing line is not fed. This can be caused by improper winding of the fishing line, or by the fact that after installation on the trimmer they simply forgot to pull the ends of the cord out of the retaining grooves on the spool.
Another nuisance when mowing vegetation with a trimmer cord is sintering of coils inside the coil. This happens because when meeting with an obstacle that is too hard, the cord is sharply braked. With such jerks, it is drawn in and sticks to the part wound on the spool. As a result, you have to interrupt the work, disassemble the coil and tear together the coiled turns of the cord. In some cases, spraying with a silicone spray the fishing line wound on the spool before installing it in the reel helps to avoid this.
Most often, a semi-automatic head of two spring-loaded parts (housing and spools) is used for trimmers. Structurally, the spool can be in two versions. Two-sectional, when each end of the cord is wound into its own section, which reduces its tangling and sintering. Or single-section, when both ends of the fishing line are wound together.
Our craftsmen came up with a simple, cheap and elegant way to turn a single-section spool into a two-section, the essence of which can be understood from the above photos.
To do this, a ring is cut out of a strong and thin plastic plate, the inner diameter of which corresponds to the thickness of the spool in the area of winding the line, and the outer one to the diameter of the protrusions. That is, along the spool such a ring should move freely. Then a cutout is made for the cord, the ring is cut, put on the spool and the cut is glued with adhesive tape. Now each end of the fishing line can be wound into a section designed for it.
The mowing head with the feed of the prewound cord has two or four opposing openings from which the mowing ends exit. In addition to reels with a portion of the fishing line, there are also trimmer heads with plug-in pieces of fishing line of a fixed length (for example, Oregon Jet-FIT).
In this case, the number of working “mustache” can reach up to twelve. Some users consider this design to be quite convenient, but another part is unhappy because they believe that the cord consumption increases and that it is necessary to stop working to replace it. In these heads, as a rule, a fishing line with transverse notches is used.
When mowing with trimmer cord of tall grass, it will be wound on the spindle at the attachment point of the mowing head. How often this will happen, largely depends on the design of the head and the properties of the mowed grass, but it is practically impossible to completely avoid this. The best solution would be mowing not with a cord, but with a trimmer knife specially designed for such cases.
The trimmer knife used as a cutting tool can be made of plastic or metal and have a different number of blades (teeth) of various shapes.
On models of trimmers with a curved bar should only use plastic knives (for the safety of the mower and commensurate with the capabilities of the flexible shaft). In addition, they often come with electric trimmers.
It can be either a special mowing head with replaceable removable plastic knives, or a one-piece design in the form of a circular knife with a different number of blades. Such trimmer knives have tough vegetation on their teeth (dry grass, burdocks, nettles, etc.).
For processing large areas and mowing not only grass, but also cutting shrubs or even young trees, metal knives are used. The only thing such trimmer knives are “afraid of” is collisions with objects that are too hard for them (for example, stones).
Metal knives can only be used on straight-bar trimmers. They cannot be mounted on a tool with a curved bar. This is primarily due to safety precautions. If, when mowing vegetation, the disk comes across a solid obstacle, then in this case it is thrown back. For straight-bar trimmers, the distance to the user’s feet is significantly further.
Plus, a T (U) or J-shaped handle helps to hold the tool, and a special protruding limiting bar is added to the D (O).Shaped handle, which abuts the leg and does not allow the cutting tool to reach it. Curved bar trimmers are usually equipped with a D (O).Shaped handle without a limiter.
Secondly, a high-torque metal circular knife creates a large load on the flexible shaft and motor, which leads to quick tool breakage.
As user experience shows, the shape of the blades (triangular, rectangular, etc.) practically does not affect the quality and speed of mowing. But their number becomes important when using a trimmer for harvesting hay. Three or four-pronged knives cut the grass too much when mowing.
The most optimal for haying are considered to be almost round eight-tooth knives or with four large and additional smaller teeth between them. Perforated discs with a large number of teeth are also popular. Such a lightweight mill for the trimmer can be installed on low-power tools.
Using a mill for a trimmer, that is, a circular knife with a large number of teeth, it is possible not only to clean the area from luxurious perennial weeds, raspberries, etc., without problems, but also to cut trees with a trunk diameter of several centimeters.