Husqvarna gas tanker fuel consumption per hour. Husqvarna to 1250 16

Husqvarna K750 (Husqvarna) Benzorezer: Purpose, TTX, Procedure for Work

The compact design and functional ergonomics, as well as the modern and compact design of the Husqvarna K750, has a clear resemblance to other models of this brand. The solid engine of the engine has rounded smooth outlines, which allows you to conveniently press it with your foot or hip, when you need to make a slightly greater effort.

For a convenient working position and reducing the load on the user, the distance between the handles is made by a large. Thanks to the design of the handles and the short body of the K750 engine, the operator is always close to the car, and therefore it is easier to handle and control.

For even more convenient operation of the machine, the front handle has a completely new, thickened design that provides a more convenient capture. The new DualchaRge engine exclusive technology provides an exceptionally high engine power of 3.7 kW with a low exhaust level with impressive fuel savings. The power of the motor reaches 5 liters.With., The volume of the cylinder is 74 cm 3. At idle, the model reproduces 2700 revolutions per minute at minimum speed and 9300 (-150) at maximum speed without load. As additional functions, the anti.vibration system and co.chec.

In a word, a cleaner and more effective engine. The Husqvarna K750 cutter is also equipped with a large, effective muffler, an automatic decompression valve and a new vibration absorption system, which makes the machine extremely quiet and easy to operate. The fuel tank, the handle and the air intake system are a block completely free from vibration, which provides exceptionally low vibration of the handles (less than 5 m/s 2).

The dimensions of the muffler are doubled. Along with the large size of the air intake, this makes the engine more quiet and effective. The device weighs 9.4. 9.8 kg (depending on the diameter of the end machine). Its configuration contains active air type filtering, which reduces embezzlement for maintenance. Carburetor of the Smartkarb series provides maintaining stable power.

Methodical plan Synopsis and operating manual is available according to the “Download” button after the article

Design

front handle; 2. water supply crane; 3. warning sticker; 4. air filter lid; 5. cylinder cover; 6. suction; 7. lever of blocking gas trigger; 8. gas trigger; 9. starting gas clamp; 10. stop contact; 11. OilGuard shutdown function (K750 OilGuard); 12. Starter handle; 13. starter; 14. muffler; 15. fuel tank; 16. decompression valve; 17. shield of the cutting disk; 18. adjustment handle for protection; 19. belt shield; 20. connecting water with a filter; 21. cutting lever; 22. data plate; 23. belt tensioner; 24. cutting node; 25. cutting disk; 26. universal key;

Husqvarna E. series chainsaws. Features and opportunities.

The article will talk about the Husqvarna chainsaw 142 365 137 of the series, the method of using the Husqvarna chainsaw, the advantages and disadvantages of the popular chainsaw.

Most of the main buyers of chainsaws are logging. However, recently the situation has changed somewhat. private users and landscaping and utilities who acquire equipment mainly in the main domestic and semi.professional class have been noticeably activated. Recently, an ordinary user has gained some experience. For many, the cost has already ceased to be the main criterion for the choice, people began to pay more attention to the trademark, the functionality of the tool, the availability of consumables and service. The same requirements are imposed on chainsaws and professionals. It turns out that an ordinary user needs the same, except at a lower power and at a more affordable price. Firms and organizations engaged in landscaping work have also changed the criteria for choosing equipment. For example, if the most cheap tool previously prevailed before, now the technique has become in demand as reliable as possible, even if it is more expensive.

Of course, the manufacturers noticed the emerging trends and made the corresponding conclusions. So, one of the leaders in the production of equipment for forest, park and garden. Husqvarna (Husqvarna). has recently completely updated the line of domestic and semi.professional chainsaws. What is important for an ordinary user ‘so that the chainsaw is started quickly and with minimal efforts. This idea formed the basis of the modernization of the previous models of chainsaws. Husqvarna developers made a number of changes aimed at simplifying operation. As a result, a new Husqvarna chainsaw line appeared on the tool market, called “e-series”. “Easy”. Easy, not difficult). “E-Series” is intended for those buyers who highly appreciate the understandable and easy-to-operate tool. The essence of the designation “e-series”. Separate options. They are not constant, but vary from model to model.

It should be noted that all Husqvarna chainsaws. including household, constructively similar to professional class models. Of course, they are easier and, accordingly, cheaper, but the manufacturer did not save on the convenience of the user’s work and security. Most Husqvarna chains are equipped with an automatic chain inertial brake. This detail was invented by Husqvarna engineers, so for the first time it appeared on the chainsaws of the “native” brand. Some manufacturers still produce chainships only with the contact brake of the chain. That is, it turns on only when contacting the operator with the hand of the operator. In practice, this means that with a tree roll, the contact brake of the chain may not work at all, because when sawing in a horizontal plane, the operator holds onto the vertical part of the front handle, not covered by the brake panel.

The anti.vibration system also used professional, based on the principle of “two masses”. Another design on Husqvarna chainsaws is not used.

All Husqvarna chainsaws “E. Series” are equipped with professional high.profile chains. They significantly win in performance in low.profile, equipped with a limiting link. The difference in cutting speed reaches 40%. This will be especially noticeable with large volume of work. The high.profile chain has other advantages. it maintains performance on contaminated wood.

The most common error when starting the chainsaw is to close the air damper, forgetting to enable the ignition. As a result, the fuel mixture enters the cylinder, but does not ignite, since there is no spark. You have to twist the candle, wipe or warm it up. On many Husqvarna chainsaws there is a combined damper. the ignition turns on automatically when the lever of the damper is extended, closing it. In this case, the probability of an error is excluded.

Husqvarna 137e. Light and compact chainsaws of small power, optimal for episodic work. The model fully repeats its predecessor 136, but is equipped with an additional spring starter. When pulling the cord, it is compressed to a certain point, after which it is automatically released, unwinding the engine to the required number of revolutions. The main spring, as in the standard design, returns the cable after jerking. It is especially convenient that a lot of sharp jerks are not required to launch a chainsaw, the cable stretches smoothly. The new starter remained the same compact. the ergonomics did not suffer.

Power (kW / l.With. ): one.6 /2.2 cylinder 2 (cube. cm. ): 37.0 weight (without tire and chain) (kg. ): four.6 Chain step (inch): 0.325 Carter material: plastic cylinder coating: chrome proportion of the fuel mixture: 50: 1 volume of fuel tank (l. ): 0.41 fuel consumption (g. / kW-hour): 380 Oil tank volume (l. ): 0.20 tire length (cm. ): 33-38 Oil pump: Automatic zeeper: Metal spring starter preliminary cleaning of air automatic INOUSTERY Brake of the circuit Anti-vibration system Metal dentate emphasis

Husqvarna 142e is a version of the 137th, equipped with a more powerful engine. The rest of the models are identical by almost 100% (even in spare parts), only the details of the piston group are different. A consequence of increased power. higher performance. Husqvarna 137E and 142s are produced in America. production in countries that do not depend on Euro, it is better to affect the price, which, of course, is a determining factor for most ordinary consumers.

Power (kW / l.With. ): one.9 /2.6 cylinder volume (cube. cm. ): 42.0 weight (without tire and chain) (kg. ): four.6 Chain step (inch): 0.325 Carter material: plastic cylinder coating: chrome proportion of the fuel mixture: 50: 1 volume of fuel tank (l. ): 0.41 fuel consumption (g. / kW-hour): 380 Oil tank volume (l. ): 0.20 tire length (cm. ): 33-38 Oil pump: Automatic zeeper: Metal spring starter preliminary cleaning of air automatic INOUSTERY Brake of the circuit Anti-vibration system Metal dentate emphasis

Stihl, Partner, Husqvarna gasoline saws. Direct competitors of gas tanks.

Tagirolik, vibeo about the operation of a gasoline saw, a chainsaw STIHL, Partner, Husqvarna, benzores, a gasoline, cut metal, prepare a fuel mixture, the principle of operation of a two.stroke engine, a circuit, and maintenance of a gasoline saw.

The article uses WWW materials.MasterCity.ru

You can get answers to the questions you are interested in by writing a letter on Expert@Eletos.ru

Delivery for and region

Delivery of software and region is carried out by its own courier service, so we can deliver the order at a convenient time for you. We also deliver in the late evening time, on weekends and holidays. The courier in advance, in 1 hour calls out with you and confirms the time and delivery address.

for each km from MKAD.

When delaying the order for 3 days, an additional discount of 3 % is given.

Delivery of software is carried out through transport companies and mail for delivery through transport companies will require your passport data. Through “mail is possible only up to 30 kg. The cost of sending the sending through mail 500 r.

We work with all transport companies. The approximate cost of transportation from to your city can be calculated on calculators of carrier companies.

Babylomores Husqvarna K 970 16 “9673481-01

Delivery is made after payment for cash or bank transfer. Delivery time up to 60 days, clarify.

4.8 kW / 6.4 liters.With., 93.6 cubic meters. cm, maximum cutting depth. 145 mm, max diameter of the cutting disk. 400mm, light start, weight (without a disk) 11.9 kg. Protective casing. 400mm, landing. 25.4mm

As a gift, oil for 2 stroke engines 1l

Husqvarna K 970 16 “Fires is distinguished by a unique attitude” Power/Weight “. It is equipped with one of the most effective centrifugal air purification systems of the new generation Active Air Filtration, which provides the tool without replacing the filter for up to one year, as well as an integrated automatic system for compensation for the SmartCarb filter and highly effective vibration suppression system. The X-TorQ engine reduces emissions by a maximum of 75% and fuel consumption by a maximum of 20%, and the durastarter starter with double sealing increases the reliability and service life. Air Purge device and pressure discharge valve provide a very easy engine launch. A new ergonomic rear handle with convenient controls comfortably adjacent to the body. Benzorezores K 970 16 “. The perfect tool for heavy cutting concrete and stone during reconstruction, renewal and construction of buildings. It is also ideal for creating small holes and fitting window and doorways and cutting pipes, asphalt and metals.

• Husqvarna K 970 16 “is equipped with a new set for wet cutting with low water consumption
• The cutting console is reversible, which allows you to cut close to the wall or floor.
• The transmission belt is in a completely tight casing. This prevents the penetration of dust and the wear of the mechanism is reduced. A sealed transmission reduces the risk of slipping and premature engine wear
• The anti.vibrational system of the K 970 gaskets reduces vibration on the cutter’s handles, so it is more convenient to hold them and it is possible to work longer. The distance between the handles is sufficient to make the user’s working position more convenient and reduce fatigue. This, along with new design solutions, made it possible to closely close the center of gravity of the machine to the operator, which facilitates the work and control of the cutter
• Compact design, small weight and properly located handles facilitate the process of working with the machine. In addition, the anti.vibration system available in the handles provides convenient conditions for working during long.term shifts.
• The built.in automatic system for compensation for the SmartCarb filter more maintains high capacity and reduces fuel consumption.
• Simplicity of launch K 970 is provided by a decompression valve and air purge.
• The clinic belt provides better power transmission, less often requires re.tension, significantly lengthens the service life of the product
• The fuel level indicator in the tank helps to avoid unwanted downtime.
• Light step.by.step settings of the magnesium casing facilitates the cutting process.
• Equipped with the brake of the disk (reducing the time stopping time, after stopping the engine)
• DEX, a new dust suppression system, provides clean cutting with a smaller volume of water and sludge.
• The transition ring for installing discs with a diameter of 20 mm includes

EasyStart technology reduces compression, facilitating the launch of carriers.

The patented dust.gaping starter device of a fuel cutter with a closed return spring and a pulley bearing. The Durastarter (TM) device is also equipped with a starter cord with significantly increased wear resistance. This practically eliminates the need to serve the starter and increases reliability

Features of the Husqvarna K 970 gasoline cutter.

Characteristics

WARNING! Before starting, follow the following:

• Do not start the end machine without the mounted belt cover. Otherwise, the clutch coupling can occur, which will cause injury.
• Before starting, always take the car away from the place of the clock.
• Check that both you and the car are stable and so that the cutting disk can rotate freely.
• Make sure that there are no people and animals in the working area.
• Launch of a cold engine

Ignition: set the ignition switch to the left position.

Fuel damper: extend the handle of the suction.

Starting gas lock: press the gas regulator, gas regulator, and then starting gas blocker (A). Release the gas regulator and it will remain in the position of half gas. The lock is removed when the gas regulator is pressed completely.

Launch of a heated engine

Use the same procedure as with a cold engine, but without setting the air damper in a closed position.

Grasp the front handle with your left hand. Put the right leg on the bottom of the rear hand and press the car to the ground. When do not wind up the starting cord around the hand.

WARNING! The cutting disk rotates when the engine is launched. Make sure that he rotates freely.

• Grasp the handle of the starting cord with your right hand and slowly pull it until you feel resistance (the captures come into action), then pull the cord with a sharp movement.
• note! Do not completely take out the cord and do not release the starter handles with a completely elongated cord, this can lead to damage to the machine.
• When the engine starts to work, quickly give full speed and starting gas will automatically turn off.

Disk gas tuning. types of tools

We have already touched on the topic of dry and wet cutting, in principle, these are the main criteria for separating models by type of work. Devices for dry process are cheaper, but there are its own characteristics of work. The fact is that the fluid during wet cutting not only reduces the dust level and degree of disk wear, but also heating it. So, the tool more time works more without interruptions on a “smoke break” to cool. With dry cutting, this should be done every 30 seconds, it is easy to imagine how uncomfortable it is.

Of course, it is not necessary to turn off the tool completely, but “ventilating” it for 15 seconds, letting it work idle, you still have to. If this is not done, then the disk will very soon need a replacement, and why a small accident will happen, and you will have to master the repair of gas tanks. In addition to the principle of operation of the adaptation, they are divided for its intended purpose, highlighting the highly specialized varieties. For example, a strooboresis. This tool is almost a copy of the classic device, but has two saws (disk). Why is it, ask you? This allows you to do in the material a channel with an equal width along its entire length, so the need for accurate measurements and markings, as well as doubled operation of a single.disk tanker, disappears.

A specific variety is a rail cut, working according to a classic algorithm, it has a special device that fixes it on the rail, significantly simplifying the work of a person, creating an even incision and deeper penetration.

It would seem that you can still come up with in such a device. But there is still a rather interesting type of gas tank. a chrome version. Its peculiarity is that the casing significantly shines, because it is covered with chrome. This is needed for poor visibility, such a model in rescue operations is especially popular. Of course, all these delights are not for home use, and it is unlikely that detailed information will come in handy. And ordinary classic models are rarely bought by private masters for domestic use, most often, such a tool is rented, sometimes even an hour. Therefore, there is another burning question, how to choose a suitable model.

Husqvarna K760 gas tanningoresis

Husqvarna K760 BASZOZER. a representative of a powerful, reliable, universal construction tool. It is used for operations for cutting a stone and concrete foundation during the reconstruction, renewal and construction of buildings and structures. This is an ideal device for the formation of doorways and window openings, as well as for cutting pipes. He perfectly copes with concrete, metal and asphalt. Effectively device Husqvarna K760 and in rescue measures, is often used to clear the rubble.

The Husqvarna Cut N Breaak K760 design provides a disc. Updated Cut-Break K760 wheel, which is highly cutting the cut and decent strength characteristics. With such a gas tank, you can phasedly cut the wall surfaces with a maximum thickness of 40 cm. According to the standard, this model is equipped with a 73 cube engine that provides high tool performance.

Also, Husqvarna K760 14 is characterized by such features as a minimized level of noise and vibration. It is equipped with an innovative centrifugal system Activ Air Filtration. which does not require replacement for the year. It is easy and as profitable to operate the gas cutter of this model, as it is quite simple and cheaper to use. The X-TorQ type engine used to equip the tool allows you to reduce the amount of fuel processing emissions to 75%, which reduces gasoline consumption by 20%. The Air Purge system, supplemented by the pressure discharge valve is responsible for the simple launch of the device.

Features and characteristics that distinguish the Husqvarna K760 14 gas tanker:

Durastarter. This is a patented dustproof device of the starter type, which has a protected design that closes the pulley bearing and a return spring. It also provides for a high.strength starter cord, its high wear resistance increases the reliability of the carlers, eliminates the need for frequent repair of the device. Anti.vibration system. The advanced system reduces the level of vibrational effects on the handle as much as possible, so it has become much easier to hold it. Thus, you can work without unnecessary stress of the hands much longer. The distance is also quite comfortable for the operator between the handles. Due to the maximum approximation of the center of gravity, Husqvarna K 760 to the user allows us to simplify the workflow and facilitate the control of the carpenter. Fuel indicator. Very convenient, to control the level of gasoline in the device, the characteristic. Thanks to this feature, downtime can be avoided. Sealant transmission extending the life of the instrument. Easystart technology. It allows you to reduce compression and simplifies the process of launching the cutters. Set of equipment for wet cutting. Using it, it is possible to minimize the amount of dust produced during the cut, thereby reducing the level of negative impact on the health of the operator. At the same time, the water consumption in the device is small, which does not require frequent refueling of the tank. Updated cutting nodes. Intended for high.quality cutting operations, double cutting diamond discs, 230 mm in diameter, are responsible for a fast powerful cut. Activ Air Filtration. This is one of the most effective systems among a similar type of device, which is responsible for the uninterrupted operation of the device. Without replacing the filter, gas tanker. in dry cutting mode, the device can be operated throughout the year. Smartcarb. The built.in system of compensation for the automatic type filter allows you to work longer in an enhanced mode, at maximum power, without increasing fuel consumption. Decompression valve that is responsible for the simplicity of starting. Advanced carburetor. The tool is equipped with a carburetor, which has an automatic filter substitution system. This design feature of the tool allows you to reduce the level of fuel consumption without reducing the operating power.

Husqvarna K 760 Benzores is one of the best offers in its professional equipment segment. The device perfectly considered such valuable qualities as reliability, versatility, compactness, which makes it possible to use it in difficult conditions. Other significant advantages of the model are a convenient control system and an increased security system, thanks to which the operator’s work becomes the most productive and comfortable as possible.

Benzorezer CD 350 mm Husqvarna K 770 art.9676821-01

Benzorezer, disk with a diameter of 350×25.4/20 mm, cut depth 125 mm, 2-clock gasoline engine with a 5 liter X-TorQ system.With. volume of 73.5 cubic meters.cm cube.cm, fuel tank 0.9 liters, light starting system, SmartTension, Active Air Filtration filter service system, water supply system, anti.vibration system, dimensions 605x225x415 mm, weight 10.1 kg, transition ring for 20 mm discs, disk for 20 mm disks, disk for 20 mm disks, disk acquired separately.

Husqvarna K 760 14 inches 350 mm gas. powerful universal benzoresis with functions that make it the best tool of this type in the world. It is equipped with one of the most effective centrifugal air purification systems of the new generation Active Air Filtration, which ensures the operation of the tool without replacing the filter for up to one year, as well as an integrated automatic system for compensation for SmartCarb filter and a highly effective vibration suppression system, is equipped with an X-Torq engine. which reduces emissions by a maximum of 75% and fuel consumption by a maximum of 20%. Other important components of the Husqvarna K760 300-25.4 gaskets. This is a dust.dried starter Durastarter, which increases the reliability and service life of the product, the Air Purge device and the decompression valve to facilitate the launch of a gasket. K 760. The perfect tool for cutting concrete and stone during reconstruction, renewal and construction of buildings. It is also ideal for creating small holes and fitting window and doorways and cutting pipes, asphalt and metals.

• The engine with the X-TorQ system produces 75 % less emissions, consumes 20 % less than fuel and provides greater power.
• SmartCarb gas.cutter carburetor with built.in automatic filter compensation supports high power and reduces fuel consumption, noise is reduced by 25 %.
• Compact design, small weight of the gasket and properly located handles facilitate the process of working with the machine. In addition, the anti.vibration system available in the handles provides convenient conditions for working during long.term shifts.
• A sealed transmission reduces the risk of slipping and premature engine wear.
• Simplicity of launch K 760 is provided by a decompression valve and air purge.
• The anti.vibration system reduces vibration on the cutter’s handles, so it is more convenient to hold them, and you can work longer. The distance between the handles is sufficient to make the user’s working position more convenient. This, along with new design solutions, made it possible to closely close the center of gravity of the machine to the operator, which facilitates the work and control of the cutter. An effective system of fluctuations suppression minimizes the vibration of the machine (below 5 m /s²), which allows the operator to work longer without fatigue.
• DEX, a new dust suppression system, provides clean cutting with a smaller volume of water and sludge.
• The clinic belt provides better power transmission, less often requires re.tension, significantly lengthens the service life of the product.
• The fuel level indicator in the tank helps to avoid unwanted downtime.
• The ability to install discs with a diameter of the landing hole 20 and 25.4 mm (1 inch) thanks to a universal installation sleeve.

Produced

Husqvarna. Swedish trademark of garden equipment and industrial and domestic tools. The company was founded back in 1689. At the very beginning of its activity, the company was engaged in the production of muskets, possibly the best at that time in the world. It was then that the basis of engineering skill was laid down, which allowed us to develop some of the best products in the world in areas such as hunting weapons, bicycles, motorcycles, kitchen equipment, sewing machines and tools for external work. In 2007, Husqvarna bought a German manufacturer of Gardena garden equipment and thereby strengthened its position in the global market. Today, Husqvarna is the largest manufacturer of saws, lawn mowers and garden equipment, as well as tools for cutting stone and for the construction industry. The headquarters is located in Stockholm, Sweden. Products are of high quality, used for both professional and household needs.

STIHL, Husqvarna, Partner gas troops. Comparative analysis of models.

STIHL TS400 benzores. The class is professional.

Power: 3.2 kW. / four.4 l.With. Cylinder volume: 64.1 cubic meter. cm. Disk diameter: 350 mm. / 14 inches. Sprinked depth (Max.): 125 mm. Rotation frequency (max.): 9700 about. / min. Fuel tank volume: 0.55 l. Disc weight: 9.3 kg.

Anti.Vibrational system Electronic ignition system Triple air cleaning system with compensator semi.automatic adjustment of the drive belt tension of the dust.shaped starting mechanism Lighted ELASTOSTART LECECTART Decompression Valve Convenient location of the mode switch under the thumb of water transition for supplying water

STIHL TS400 benzores belongs to the class of compact tools. The main advantages of the model are a high.speed engine and a convenient control system.

Husqvarna 371k benzores. The class is professional.

Power: 3.5 kW. / four.8 l.With. Cylinder volume: 70.7 cubic meters. cm. Disk diameter: 300/350 mm 12/14 inches. Sprinked depth (Max.): 100/125 mm 4/5 inches. Rotation frequency (max.): 5100/5400 about. / min. Fuel tank volume: 0.77 l. Weight without fuel: 9.1 kg.

LowVib anti.vibration system Electronic limiter of maximum revolutions Three.speed air filtration system Automatic lubrication of adhesion bearing decompression valve changed position of the cutting disk

Universal benzores, which, thanks to a narrow case and the ability to change the position of the cutting disk, allows you to work even in constrained conditions.

Partner K700 Activa I I. The class is professional.

Power: 3.5 kW. / four.8 l.With. Cylinder volume: 71 cubic meters. cm. Disk diameter: 350 mm. / 14 inches. Sprinked depth (Max.): 120 mm./ 5 inches. Disk rotation frequency (max.): 5400 about. / min. Fuel tank volume: 0.75 l. Weight without fuel and disk: 9.9 kg.

Anti-vibrational system compensator of the fuel-air mixture in the carburetor three-speed air filtration system Automatic starting apparatus Automatic lubrication of the adhesion bearing decompression valve rotating cutting shaft

Professional Makita Baskets (Makita. JAPAN). Great samurai of construction facilities.

Teggirolik, video about the work of the makita gasoline cutter (Makita. Japan), consumables for gas tanks, diamond disks, saw concrete, saw a granite slab, a two.stroke engine, fuel mixture, additive (oil) for fuel, starter, cylinder, piston, air filter, operation, repair, service maintenance. Preparation of the fuel mixture, safety precautions.

The article uses materials http: // www.MasterCity.ru/

You can get answers to the questions you are interested in by writing a letter on Expert@Eletos.ru

Husqvarna K760 disk benzore

K760. the initial model in the Husqvarna gaskets line. The design involves the possibility of installing circles with a diameter of 300 or 350 mm, respectively, the cut depth reaches 100 or 125 mm. The unit is used for cutting any abrasive building materials (concrete, stone of various types, asphalt), steel reinforcement, pipes, etc.D. You can work both dry and with water supply. The valve control valve is conveniently located under the thumb of the operator’s left hand, so it is not difficult to quickly adjust the amount of water to the cutting zone directly during cutting. This, in turn, makes it possible to achieve a regime when moisture effectively connects all the dust with the minimum formation of sludge.

The engine is two-stroke, with the cylinder system of the X-TorQ atmospheric air. Such motors are used on chainsaws and motorcycles Husqvarna. Compared to conventional two-stroke engines, the X-Torq system guarantees more than solid fuel economy (up to 20%), as well as a reduction in harmful emissions. Speaking of “ordinary two.strokes”, we mean not a marketing sinking in the spirit of “ordinary washing powder”, but a very specific feature characteristic of the mentioned motors. After each outbreak in the cylinder, combustion products were replaced from it with another portion of the fuel mixture. At the same time, part of the mixture flew through the final window into the muffler, without burning, t. e.

Without any benefit. It is now clear what is the reason for such a significant fuel savings in X-Torq-it does not “squandering” valuable fuel.

The air filter has a complex design, as befits a gas outlet. The first stage is centrifugal air purification, which is again widely used in this brand chainsaws. The flywheel promotes the flow of air, and heavy dust flies to the edges of the flywheel, and the air fence comes from the central part. Further, a cyclone separator is installed in the path of dust, and only then the filtering element. All this extends the interval between periodic air filter services. To facilitate the start of the engine, it is equipped with a decompression valve.

Characteristics of Husqvarna K760

Engine: 2-stroke X-ORQ gasoline; 74 cm

Fuel: a mixture of gasoline and oil for 2-stroke engines in a proportion of 50: 1

Weight: 9.3/9.5 kg (depending on the diameter of the disk)

Features: X-ORQ engine with air blowing by air; decompression valve; light starting system; anti.vibration system; adapter with a adjustable valve for connecting a hose with water; adjustable protective casing