Lawn Mower Gasoline Huter Glm-5.0 S

Special price until the end of this month. 16190 rubles.

• The lawn mower petrol Huter GLM-5.0 S works easily and accurately. The dimensions of its wheels allow a rather gentle effect on the surface of the lawn, while ensuring sufficient cross-country ability.
• The rear wheels of the lawn mower have a mechanical connection with its power unit, which makes the unit self-propelled and easy to operate.
• The grass collection tank is spacious and allows you to work for a long time without cleaning. Convenience increases the possibility of its easy dismantling.
• The control handle is removable and folding, which increases convenience during transportation and storage. It can also be adjusted in height, in accordance with the growth of the operator.
• The mowing height of the lawn is adjustable and can be fixed in five positions.
• Lawnmower control is not complicated and affordable.
• The casing of the unit is made of sheet steel, and therefore is durable and reliable.
• The cutting tool of the lawn mower is hidden inside the housing, which increases safety during its operation.

General information

Lawnmower gasoline Huter GLM-5.0 S designed to maintain lawns in a well-groomed condition in the park, on the lawn, etc., by cutting the grass on relatively flat surface areas. The unit is equipped with a single-cylinder, four-stroke gas-cooled internal combustion engine with manual start. He is able to develop power up to 5 hp. The main controls (“gas” and braking) are placed on an arched handle, convenient for the user. The handle is adjustable for operator height, and during storage and transportation can be completely detached, reducing the required space.

The lawn mower is mounted on four plastic wheels, each of which is equipped with a soft polymer tread and does not harm the vegetation of the lawn. The unit is completely self-propelled. The rear pair of wheels is driven by the engine and pushes the entire structure forward. The operator can only give her the right direction.

The width of the strip processing grass cover is 460 mm. The casing is designed in such a way that the bevel width is greater than the length of the wheel axis. This provides the ability to handle even those areas that are adjacent to the wall or fence. The height of the grass remaining after mowing is set in five positions using a special lever and varies in the range from 25 to 75 mm.

Mowed grass is not scattered, but collected in a special plastic container with a volume of 50 liters. This spaciousness allows you to work for quite a while without cleaning it.

The Huter GLM-5.0 S petrol lawn mower is easy to maintain and operate. Its main components and interchangeable elements (for example, an air filter, etc.) are located so that they can be easily reached if necessary. The manufacturer also made sure that his product fully meets modern requirements for quality and safety.

The device and principle of operation

The gas mower Huter GLM-5.0 S is assembled and equipped in such a way that it is most convenient for the user to operate it, perform maintenance, transport and store it. Squat case-deck has dimensions of 820x540x490 mm and is made of durable steel sheet coated with a special paint and not subject to corrosion damage. In its lower part is mounted a chassis consisting of four wheels with bearings, with a drive to the rear axle. The height of the chassis is adjustable between 25-75 mm and is fixed at five points, allowing you to leave a fixed growth of cut grass.

In the middle of the case is a power plant, which drives the cutting tool and the unit itself. This is a fairly powerful (5 hp) four-stroke piston single-cylinder internal combustion engine with air cooling and manual start. The engine is equipped with a fuel tank with a capacity of 1.5 liters, as well as a replaceable air filter and silencer. The fuel is unleaded AI-92 gasoline. From above the engine is covered with a protective casing with special slots for free air circulation.

As a cutting tool, a rotating two-blade knife with a sharpened cutting edge, made in the form of a propeller, is used. Its task is not only to cut the grass, but also to create an air stream that directs it to the collection tank. Part of the body of the mower is a protective cover covering the knife on the sides and top, thereby providing the greatest safety for the operator.

In the back of the case there is a special window for ejecting cut grass. A grass collection tank is mounted to this window. It is made of durable plastic and consists of two halves. The lower half is stationary, and the upper is removed, allowing the user to clean the cut grass.

The controls are concentrated on a folding removable arcuate handle attached to the body with special brackets. Levers are installed on the handle, with which the operator can easily control the engine speed, clutch, giving movement to the device and the brake. Holding onto the handle itself, you can easily steer the mower to the right place.

The grass cutting process is ensured by the fast rotation of the propeller knife with the sharp edge forward. Due to this, a layer of grass that is above the set level is cut off and sucked into the grass catcher. As a result, an evenly cut lawn remains without clogging with cut off residues.

Preparation for work

The gasoline mower Huter GLM-5.0 S is quite light and convenient in operation and does not require special training from the operator. Its main scope is park or other lawns in the open. Even provided that the power plant of the unit is located in the lower part close to the surface to be treated, wet grass will not become an obstacle to work. However, the mower should not be operated directly during rain. It is also worth taking care to reduce the time of her stay in direct sunlight.

Before you start working with the lawnmower, you should familiarize yourself with the technical documentation, then assemble it (if it is new from the packaging, or has been disassembled for transportation or storage). After that, the cutting height should be adjusted, that is, the desired future height of the grass of the lawn. This operation is carried out centrally, on both axes at once, by means of a special lever. Next, check the oil level in the crankcase and, if this oil is not enough, refuel. Now you can start refueling with AI-92 gasoline in the fuel tank. The last operation must be carried out with special care and attention, since gasoline is a liquid that flashes very easily and burns very much. In addition, it is toxic, and its vapor, having reached a certain concentration, can explode. Therefore, work with gasoline should be carried out either in the open air, or in a well-ventilated room (canopy, barn, garage, etc.), strictly adhering to fire safety rules.

The lawnmower should be used strictly for its intended purpose and to the extent permitted by its technical capabilities. It is also necessary to systematically and thoroughly carry out maintenance and repairs, and refuel only with oils and gasoline recommended by the manufacturer. All this together will extend the life of the unit for an indefinitely long period. The manufacturer of the gas mower Huter GLM-5.0 S has set its warranty period to 1 year from the date of sale.

Manufacturer

The German brand HUTER has been represented on the Russian market since the early 2000s and during this time has earned the recognition of consumers across the country. The main areas of production. These are electric generators and garden equipment, according to which HUTER is one of the leaders in the market.