Which drill electric screwdriver to choose for the home

Favorite ID 600 / 2S

The compact 2-speed drill / electric screwdriver can handle the task with ease thanks to its powerful electric motor and reliable gearbox. Keyless chuck allows quick tool changes without the need for additional tools.

For convenient operation, the model is equipped with a reverse and a 24-position torque adjustment clutch. There is also an electronic speed control that responds to the force of pressing the start button.

• Light weight.
• High torque.
• Good balancing.
• Two speed modes.
• Ergonomic handle with anti-slip pads.
• Lack of case included.
• Short network cable.

What Cordless Drill Should I Buy. Toolstop Helps You Choose

Favorite ID is suitable for both a home craftsman and a professional working in the field of finishing works.

Which drill-electric screwdriver is better to choose

When purchasing an electric drill, pay attention to its technical characteristics:

Maximum torque. depends on engine power, gearbox design and spindle speed. Professional drills are capable of delivering about 40-125 Nm.

It is also important to adjust the speed of rotation of the power unit. Low revs (up to 1200 rpm) are necessary for working with fasteners and the possibility of using larger diameter tooling. Up to 3000 rpm suitable for drilling holes in hard materials, wood and plastics.

The reversible mechanism allows you to change the direction of rotation of the rig for screwing and unscrewing fasteners. And the presence of an impact mechanism makes it possible to use an electric drill for drilling holes in concrete.

Bort BSM-250×2

The Bort BSM is an inexpensive 1,500 hammerless electric drill with a keyless chuck for easy tool changes. It has a torque high enough for a tool of this class and has the ability to work in two speed modes.

To select the optimal force, the manufacturer has provided 20 degrees of its adjustment, the drilling mode. Standard functionality: reverse, change in speed, lock the start button.

• Good torque.
• Work in two speed modes.
• Compactness.
• Light weight.
• Short and rigid network cable (1.7 m).
• Handle without rubber pads.

Bort BSM-250×2 is a good and moderately functional tool that will come in handy in the country and in the home workshop.

Instar EDR 72700

The inexpensive, compact 2-speed drill with keyless chuck is equipped with a powerful motor and high torque gearbox. Their performance is sufficient not only for drilling and screwing, but also for mixing light mortars. The main feature of the Instar tool is double insulation of internal electrical components, which significantly increases the service life of the device.

• Reliability.
• Powerful engine.
• 14 degrees of torque adjustment.
• Low cost (2 thousand).
• Virtually no equipment. no case, no bits.

Instar EDR is suitable for home use and construction site use.

best electric drills

The power tool market is represented by a huge number of models of networked screwdrivers from famous manufacturers and little-known brands. Despite the minimal design and functional differences, the difference in the cost of devices can be quite significant. To simplify the choice of tools, we offer you a rating of the best cordless drill / screwdrivers.

Bison ZSSH 300-2

• High torque.
• Two-speed operation.
• Good functionality.
• Long network cable (5m).
• .

Despite belonging to the budget segment and the household class, the Bison ZSSH is a very functional tool for serious work.

Makita HP2070F

Makita is a high-performance professional tool with a powerful motor, reliable gearbox and hammer mechanism that provides a large number of impacts when drilling.

Efficient operation is also facilitated by: torque limiter, soft start, engine speed control, reverse, drilling depth limiter, start button lock, work area illumination and additional handle.

• Good feature set.
• High power.
• Possibility of long continuous work.
• Smooth start.
• Adequate torque limiter.
• Safety clutch does not always engage.

Makita HP2070F is a powerful and reliable enough tool for work in the repair and construction industry.

This high-performance tool is often equipped with a percussion mechanism and a motor that can produce more than 1.5 kW and a torque of 125 Nm. Professional drills are reliable and perfectly withstand prolonged loads.

Conventional drill

This is a drill without any bells and whistles. It does not have an impact function, so only wood, drywall, metal and other not very hard surfaces can be drilled with it. This tool is suitable for minor repairs in the country, in a barn, a wooden house. Conventional drills without impact function can be cordless or powered.

Drilling diameter

The instructions for the drill indicate what the maximum and minimum hole a drill can make in wood and metal; for some models, this parameter is also added for brick and concrete. If you insert drills with a larger diameter than those for which it is designed, the tool will very quickly overheat and break. The minimum diameter, as a rule, is 0.3-0.6 mm, the maximum is 30 mm, but often this parameter does not exceed 10-15 mm.

Household and professional drills

Like many other power tools, drills are divided into two principal types:

• household, for home use;
• professional.

Sometimes a transitional type is also distinguished. semi-professional drills. The principle of operation for household, professional and semi-professional devices is the same. the difference is in power, weight, price, set of functions and some other features.

A household drill for performing the vast majority of simple household repairs will be preferable. Its advantages, in addition to the lower price compared to a professional tool, include:

• lightweight design, so it is easier to work with the tool;
• versatility. Household drills are often equipped with additional functions, such as an electric screwdriver and a mixer, and there are a lot of components in the case with them. Professional drills are focused on performing a specific task, therefore, in terms of versatility, they are inferior;
• good protection and well-thought-out design makes working with a household drill more convenient and safe, which is very important for an inexperienced user;
• household drills are generally warranted higher than professional tools.

On the other hand, you cannot use a household tool for more than 4 hours a day, otherwise the drill will quickly break. The optimal time of continuous work is 15-20 minutes, after which the tool is allowed to rest and cool down for about the same amount of time, then you can return to work again. The thing is that less powerful engines and less sturdy materials are used to assemble household models. This does not mean that the drill will break quickly. it means that it is designed for light or irregular loads.

If you have to regularly work with a drill for 5 or more hours a day, then it is better to take a professional tool. It is distinguished by the presence of a powerful engine that easily withstands solid loads without overheating or failing. A professional drill can work continuously for more than an hour and about 7-8 hours a day, with small breaks. Such a tool is more expensive than a household one, less versatile, heavier, but better protected from dust and moisture, and a professional cannot do without it.

Semi-professional drills are a fairly limited class of devices. Transitional models can be represented by household drills with some properties from professional, or professional, but without any elements.

Which drill to choose depends on what kind of work and how often you are going to do it. If you need it in order to hang a shelf or a picture, if necessary, then you can safely stop at the household version. If repairs are your main or additional income, then it makes sense to consider professional drills.

Angle drill

As the name suggests, such a tool is designed for drilling holes in the most inaccessible and narrow places, where you cannot get to with a conventional drill. The design of the device is characterized by the presence of a bevel gear and the location of the rotating shaft perpendicular to the body. Such drills, as a rule, have low power and there is no need to talk about any impact function here.

An angle drill is a very specific tool, so it is better to take a regular model and, if necessary, use a special attachment. it is cheaper and in most cases wiser.

Drill types by purpose

Depending on what set of functions the drill has, the following main types of tools are distinguished:

• an ordinary drill, it is sometimes called a hammerless drill;
• hammer drill;
• drill-electric screwdriver;
• drill mixer;
• angle drill.

All these modifications are quite different from each other, including in price, therefore, when buying, it is so important to be aware of the purposes of using the tool.

Impact drill

A hammer drill is needed for those who are going to drill holes in concrete, brick, stone and other hard materials. Such a tool costs less than the simplest puncher, but has some limitations. Such a drill will not withstand constant work with dense materials. it will quickly break. In addition, frequent drilling in concrete and stone can negatively affect the accuracy of conventional drilling. If you have to work regularly with dense materials, then it is better to take a punch.

The impact drill gets its ability to punch through hard materials thanks to its special design. During operation, not only rotational action is transmitted to the drill, but also impact. If in the hammer drill the blow is provided due to a complex electromechanical or electro-pneumatic unit, then in the drill the blow is achieved due to the presence of two ratchets. One is located inside the drill, the other is attached to the chuck. When the two elements are connected, the chuck and drill begin to move in the axial and translational direction, thus providing the function of chiselling, or impact. If necessary, the impact function can be turned off, the ratchets open and the drill works as usual. However, in some models, the option to turn off is not provided. be careful when choosing.

A drill with an impact function is more expensive than a conventional drill, but cheaper than a hammer drill. Plus, it is also lighter than a hammer drill, so it can be called a versatile household tool. When choosing a hammer drill, pay attention to the power of the tool. For the shock function to be normal, this figure must be at least 800 watts. Also pay attention to the reverse rotation function and the presence of a safety clutch.

Drill chuck type

Depending on how the drill is fixed, drill chucks can be:

• a key or toothed chuck fixes the drill with a key, clamps it with three symmetrical “petals”. It is believed that such a mount allows you to more securely hold the drill, therefore it is used in powerful and impact drills. The downside is the inconvenience when replacing the drill, since you must use a special key. By the way, he can get lost, and then the time for replacement increases several times. Some craftsmen tie the key to the drill;
• The quick-clamping mechanism allows for very quick change of drills using only small manual effort. In terms of reliability, it is not inferior to the key chuck, but still it is used only in drills with low power, designed to work with not very hard materials. In terms of durability, the mechanism is inferior to the key.

How To Pick the Right Cordless Drill with Makita

Also, when choosing a drill, pay attention to the diameter of the chuck fit. The minimum value may approach 0, but usually it is not necessary to use a grip less than 1.5 mm. The maximum value can be 10-13 mm and even 16 mm for powerful drills.

Progress:

On the needles, cast on 90 loops plus 2 hem.

Knit 1-4 rows in garter stitch (all knit stitches).

5 rd: KRM (edge), 2 PERSONS (front), yarn, 11 PERSONS. repeat to the end of the row, on the needles 98 loops, KRM.

Lilac miracle. a simple openwork stole knitted

The presented model of the accessory, quite warm, knits easily. A detailed description will allow even a novice craftswoman to knit a stole.

Varieties of stoles

This type of women’s clothing once came from men’s fashion. Norman fishermen wrapped themselves in knits in chilly weather during storms. Later they began to knit in the Russian outback for women, with openwork patterns and a scalloped edge, along with Orenburg downy shawls and shawls.

Today, a beautiful model of a stole has every chance of becoming a worthy adornment of a woman’s wardrobe for any age category. Hollywood divas have repeatedly appeared with similar accessories at important events.

A winter stole is a cross between a narrow blanket and a large scarf. It fits the full length of the body, if necessary, you can take a nap on the road, covered with a wide handmade product. Thrown casually over the shoulders, the product performs the same function as warm shawls made of angora down, sheep wool or llama.

An openwork summer train made of silk in the form of a thin patterned stole is the best alternative to a bare shoulder cape for an evening dress. The wives of monarchs and top officials of states manifested themselves in them at coronations and ceremonial receptions, where naked bodies are not welcome.

There are also stylish hybrid models that combine the simplicity of a stole and the characteristic features of knitted “transformers”. In such models, slits are left under the armhole and the sleeves are tied. Then free floors fall off in front, like in a fashionable cardigan. They are worn loosely under a sheath dress or jeans with a turtleneck.

Turning over, you can get a cropped version of clothes with long floors and a large shawl collar. They are worn as a vest under the belt.

There are also combined models. with a corner piece on the back. From the back it looks like a shawl or a fashionable poncho, from the front. an ordinary stole, as in the photo.

Knit with knitting needles

Each needlewoman in her arsenal has many interesting and simple patterns, but not all are suitable for scarves and stoles. It is best to choose double-sided patterns, for example, a peacock feather face, from the inside of a sheaf. The end result depends not only on the successful choice of the scheme, but also on the quality of execution.

The selected pattern must be tested in the form of a small sample for about 20 loops or with a 10×10 cm square in order to make preliminary calculations:

• select the knitting density (when too tight, increase the size of the knitting needles);
• calculate the number of rapports or how to complement the pattern along the width of the product (the stole is knitted within 45-60 cm);
• evaluate the appearance of the pattern after wet heat treatment (voluminous weaving often lose volume or look different from the photo and before washing).

As you know, there are dense winter patterns for winter products and light openwork for summer ones. The simple shape of the stole is also good because you can try a new pattern without worrying about the pattern.

You can start the product with a small bar on which lush tassels or fringes will be attached. The description of the pattern should be clear and easy to remember after several repetitions.

We recommend reading:

Knitting bactus with knitting needles. a detailed description with photos and diagrams. Step-by-step instructions and recommendations from the craftswomen. TOP-30 best models

Knitting of socks with knitting needles. a step-by-step master class with instructions. A selection of the best models of knitted socks

Garter knitting. 140 photos and videos of the main patterns and projects of garter knitting

How to tie a stole

The choice of model depends on the skills of using one or another tool and the experience of the master. Available execution:

• on the fork. this is a special U-shaped device for knitting openwork paths and shells from beautiful yarn;
• knitting needles (the thicker the yarn, the larger the number, and the faster the product knits);
• crochet (different techniques and patterns are available).

Let’s consider how to link the simplest models with different tools.

Stole on a fork

Once this rather simple technique was very popular, it was for stoles that it was proposed in Italy. Today, the fashion for exclusive hand-made is reviving this type of needlework.

Note! There is only one difficulty for beginners. crocheting the long loops exactly in the middle of the U-fork. Having learned how to carefully perform long paths, you can start making the product.

The most suitable yarn is kidmozher, the product will turn out to be light and almost weightless. Assembling a stole. connecting long paths together. A good way to master the technique of knitting on a fork is to learn from the craftswomen who post their master classes on video.

Top 10 rating according to KP

an electric screwdriver from a well-known American manufacturer of repair equipment in a corporate yellow color. Although the price here is significant, but this device can be considered almost a standard. There is a keyless chuck, adapted to work with bits or drills up to 13 mm in diameter. The electric motor of the device produces 1500 rpm, which allows the screwdriver to develop a maximum torque of 42 Nm. The engine brake instantly stops work, as soon as you release the trigger.

By the way, the set includes two batteries, which dramatically increases the autonomy of one of the best screwdrivers for the home. However, there are some remarks about the model. For example, for some reason, even an elementary additional reinforcement for bits is not provided on the case, and the built-in LED, which should highlight the place of work, does not cope well with this.

Excellent workmanship Additional (and not cheap separately) battery included Engine brake

An extremely popular model from the German company Metabo. The origins of such popular love lie in the fact that the creators managed to maintain a balance of characteristics, quality and cost, which is difficult to compete with competitors. the electric screwdriver is very compact, and its weight is only 800 g. For a small size, of course, you have to pay somehow. But not in this case. the electric motor allows the screwdriver to develop a torque of 34 Nm.

If this “kid” is too loaded, then the electronic protection will work, which will not allow the device to break. Not only that, the chuck is removable here, and the hex bits can be used with and without an electric screwdriver. Finally, there are two batteries included, which charge relatively quickly. Confusion is caused only by a huge case, in which it is easy to lose a small electric screwdriver.

Excellent value for money Weighs only 800 g Hex bits can be used without a chuck