First Bosch Dishwasher Launch Video

The technology of different manufacturers is significantly different, so the exact following of the instructions in the manual is mandatory during the first start-up. You will find general information and useful tips in our article.

What you need to know before starting up your dishwasher for the first time

The dishwasher (hereinafter also referred to as the PMM, dishwasher) cannot be turned on for the first time, immediately filling it with dishes. First you need to conduct a test run, and here’s why:

For testing and cleaning the PMM, you need to stock up on three components:

  • Detergent;
  • Rinse aid;
  • Salt specifically designed for PMM.

Ingredients are added to the special salt for dishwashers, designed to soften tap water, prevent the appearance of scale on an electric heater (TENE), as well as to better wash the dishes. For salt, a special tank is provided. An ion exchanger, into which it must be filled.

Detergent cleanses the surface of fat deposits. Rinse aid removes dirt. Well-proven household chemicals of the European brand Bon, designed for use in dishwashers.

In addition to the above household chemicals, intended for the daily operation of PMM, tablets, powders and other compounds are now available that are intended for use in the test run of an automatic dishwasher. They include all the necessary components.

Why you can not use ordinary table salt

Many owners are tempted to use ordinary table salt, since it is much cheaper than the one designed for dishwashers. Although their composition is similar to 95%, there are still several significant differences:

  1. The degree of purification of salt is much lower, although it is intended for cooking. In addition to the main element. Sodium chloride. In its composition there are such chemical elements as iron, manganese, potassium, iodine and others. They do not in the best way affect the work of the PMM.
  2. Granules of specialized salt are much larger than crystals of table salt. Therefore, the product intended for dishwashers dissolves more slowly.

If you want your dishwasher to serve for a long time and without fail, use a special salt composition designed for its operation.

The informs about which household chemicals are best used in PMM:

Preparing for the first launch

Before turning on the Bosch SPV, Hansa or any other brand dishwasher, be sure to remove all packaging material from the camera and remove the manufacturer’s process labels.

The salt container is usually located at the bottom of the PMM. Having found it and having removed the lid, fill in approximately 1 liter of water inside, then add from 0.5 to 1 kg of salt (depending on the model). Do not be discouraged if excess water flows out. This is normal. With further operation of the unit, pouring water into the compartment is no longer required.

Many dishwashers come with special strips that can be used to determine the degree of water hardness. In accordance with this indicator, the consumption of salt is programmed. Manually or electronically.

First Bosch Dishwasher Launch

Most modern PMM models have sensors that detect the amount of dissolved sodium in water. When this indicator becomes below normal, the container should be replenished with salt composition.

Usually on the back of the door there are several compartments: for tablets, gel and powder. Tablets, as a rule, are a 3-in-1 composition, therefore, other detergents do not need to be used at the same time.

Detergent powder needs the right dosage, since not all machines have sensors that help to use it properly. In inexpensive PMM models that do not have such sensors, all the powder that is in the compartment will be used in one wash cycle. In such devices, load the dose of detergent in strict accordance with the instructions for use.

As for rinsing agents, they are consumed on the same principle as detergents. That is, in more expensive PMM, the flow is automatically regulated, and in budget devices it will be necessary to measure and fill it according to the instructions for the tool.

Initial power up sequence

Once all the ingredients are loaded, you can start the dishwasher for the first time. Actions are performed in the following sequence:

  1. Check again if the appliance is installed horizontally.
  2. Check the connections of the supply and drain hoses, as well as the electrical connections.
  3. Open the stopcock, which closes the access of water in emergency situations.
  4. Open the door of the PMM and make sure that the spray gun rotates freely around its axis (turn it by hand).
  5. Unscrew the drain filter, then rinse it under running water. For better cleaning of industrial dirt and dust, use cleaning products. Return the filter device to its seat.
  6. Select the type of detergent to be used on the panel (tablet or powder, salt and rinse aid).
  7. Set the desired mode. During the test run it should be as long as possible. The water temperature should also be as high as possible.
  8. Close the PMM door and start the washing process.

Rules for the care and use of the dishwasher

For safety reasons, do not touch the dishwasher body with wet hands, otherwise you may get an electric shock. To ensure smooth operation, do not connect electricity using an extension cord. It is better to hold a separate cable line from the distribution panel.

In order for the PMM to work for a long time and efficiently, observe the following rules during operation:

  • Constantly monitor the level of detergent, salt, rinse aid and add them as necessary;
  • Regularly clean the drain filter from dirt, monitor the cleanliness of the spray nozzles;
  • Place the dishes in the chamber so as to ensure the most efficient washing;
  • Do not load plates and pans with large food debris and burnt food into the chamber.

Everyone can prepare a dishwasher for work. You do not need to have any special knowledge or skills for this. It is enough to follow the simple instructions outlined in this material.

Watch the on how to properly launch the first Bosch dishwasher:

Electronic engineer with many years of experience. For several years he was engaged in the organization of repair of household appliances. I am glad to share with readers my knowledge in the field of operation and repair of devices. He loves sports fishing, boating and travel.

Found a mistake? Select the text with the mouse and press:

In the dishwasher, not only plates and cups are well washed. Plastic toys, glass shades of fixtures and even dirty vegetables, such as potatoes, can be loaded into it, but only without the use of detergents.

Fresh lemon is not only suitable for tea: clean the dirt from the surface of the acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave, putting in it a container of water and lemon slices for 8-10 minutes at maximum power. Softened dirt will simply wipe with a sponge.

Threads of gold and silver, which in ancient times embroidered clothes, are called cantle. To obtain them, the metal wire was long pulled by ticks to the state of the required subtlety. Hence the expression “pull (raise) the gimlet”. “to engage in a long monotonous work” or “to delay the completion of the work”.

Stretch ceilings made of PVC film are able to withstand from 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, its degree of tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

There are special traps for fighting moths. Pheromones of females attracting males are added to the sticky layer with which they are coated. Adhering to the trap, they drop out of the breeding process, which leads to a decrease in the moth population.

If the first signs of bearing in the form of untidy spools appeared on your favorite things, you can get rid of them with the help of a special machine. A shaver. It quickly and efficiently shaves the fibers of a fabric that are bundled into lumps and restores things to a dignified appearance.

Before removing various stains from clothes, you need to find out how safe the chosen solvent is for the fabric itself. It is applied in a small amount to an inconspicuous part of the thing from the inside for 5-10 minutes. If the material retains its structure and color, you can go to the spots.

It is easiest to remove scale and carbon from the sole of the iron with common salt. Pour a thick layer of salt onto the paper, heat the iron to the maximum, and several times, pressing lightly, slide the iron over the salt litter.

The habit of “economically” using a washing machine can lead to the appearance of an unpleasant odor in it. Washings at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on the inner surfaces and actively multiply.