Paint remover for angle grinder

Table of Contents:

accessories for angle grinder (angle grinder) for grinding and polishing from Aliexpress

angle grinder (angle grinder). just an indispensable tool for processing metal, wood, stone, skinning and deburring of workpieces and grinding.

A large selection of nozzles for various tasks make this device multifunctional, and the low cost. available to any master. However, there are also disadvantages. it is a high risk of injury, so while working, I strongly recommend observing safety precautions. Also inform you that from January 10 to 15 (until 10:59 pm Moscow time) on Aliexpress is a sale “Winter liquidation”, and at the end of this selection I have collected for you all the promo codes for a discount (they are valid for any product, both individually and for the entire cart).

Today’s selection includes 10 tips for sanding and polishing different materials. metal, wood, concrete. that are most useful for these types of work.

paint, remover, angle, grinder

Nozzle for angle grinder for car polishing

Here you will find both the bits themselves with Velcro (and a drill/ electric screwdriver adapter) in various sizes, and several variants of the interchangeable disc kits for them. Pay attention that the color of the jaw depends on its hardness: white is the hardest, yellow is closer to hard, orange is medium, blue is closer to soft, and black is the softest. By the way, the color/hardness can be different and opposite, so I always recommend to check it on the product page.

Hard foam nozzles are used at the initial stage in combination with strongly abrasive pastes. They polish deep surface defects. Then already take on the medium and soft and perform a finishing polish to give a mirror shine to the body.

At the link you will see and fur tips. but for the apparent “softness” with lack of experience they can easily ruin the paintwork of the car. Therefore, you should not start with them.

The nozzle on the angle grinder for grinding wood and metal with Velcro

Here you can see several lots with a total diameter of 125 mm and a 10mm or 14mm footprint. The adapter for an electric screwdriver/drill can also be purchased separately or in one order.

In the same store you can easily find and abrasive sanding discs to them with different grits. Abrasive particle sizes: 60, 80, 100, 120, 180, 240, 320, 1000, 1500, 2000 microns (the more the rougher the processing). There are 10 of them in the set. They can easily remove rust, paint and burrs from the surface of various materials, especially metal and wood.

The attachment to the angle grinder for grinding of metal and wood (bladed end abrasive disc)

Suitable for dry and wet sanding, roughing and processing of metal (chamfering, deburring) and wood, plastic processing. disc diameters to choose from. 125, 115 and 75 cm, footprint 10 or 22.23 mm, grits. 40, 60, 80 or 120 to choose from. In one lot. 10 pieces. The disk itself consists of a plastic base with zirconium oxide dusted sandpaper tips glued on it in a circle. The discs with grit 40, 60, 80 are used for quick and rough sanding (paint removal, burrs from sheet metal, etc.).e), 120. for secondary sanding. These discs are consumed quickly, so the set comes with 10 of them at a time.

Metal sanding and rust removal sander (“coral” disk)

Available in dimensions of 100, 115 and 125 mm, arbor diameter 22, 23 and 16 mm.

It can be used to quickly remove paint or rust from large metal surfaces.

The nozzle is made of non-woven fiber with abrasive particles by hot-pressing. In the process it does not clog with grinding products, does not heat the treated surface and does not spoil the metal. In addition, it is flexible, which allows you to work in hard-to-reach places.

On the other hand, some people complain about the short life of the disk and the relatively high cost. In fact, “coral disc” will last a long time, if you follow the prescribed recommendations in the work: avoid grinding sharp edges of workpieces, provide the minimum necessary pressure and adhere to the correct mode of operation of the angle grinder (for 125-135 circles RPM should be 4000-4500 per minute, for 75 mm. 6500-7000 RPM, for 150. 3000-3500 RPM).

Adapter head for angle grinder for wood and metal polishing

Here you will find both the adapter for mounting the polishing rollers on the angle grinder and the polishing rollers themselves.

The adapter is a metal product which allows you to change from M14 115/125 to M10 120x100x19mm.

However, only certain polishing rollers are suitable for it, be careful.

The cylinders presented here are suitable for grinding and polishing curved or uneven surfaces of wood, metal and other materials, both rough and finish. depending on the selected option.

Metal grinder attachment for angle grinder (Grinder)

This attachment is capable of turning your angle grinder into a belt sander. It rotates within 180 degrees, and there is a standard vacuum cleaner connection on the top of it.

angle grinder discs for rust removal and paint stripping

There are two sets for different threads, M10 and M14, and it comes with a bonded sanding belt that measures 15x452mm. The latter can be purchased in the same store and separately, 10 pieces at a time.

Area of application: with this attachment it is convenient to work in hard-to-reach or narrow places, grind and polish workpieces made of metal, wood, plastic, smooth out welding seams, clean decorative elements, perform tool sharpening and other works.

Wood, metal and concrete angle grinder bit (diamond grinding cup)

These accessories make it easy to level and grind workpieces, remove paint and other contaminants, and perform surface finishing. You can find four variants of these cups at the link. Type A1, A2 is suitable for woodworking (surface cleaning, sanding, shaping), type B (stronger) is suitable for dry or wet sanding of concrete, granite, stone, marble, tile, masonry. Type C is suitable for grinding stone, asphalt, ceramic. Seat with washer. 16 mm. It is removable, increasing the inner opening to 22.23 mm. Overall disc diameter 100-115 mm. Suitable only for household use, and when working on concrete rather quickly become worthless.

Concrete grinding angle grinder accessory (turtle)

It is used for grinding and polishing marble, stone, granite, concrete, tile, ceramic and other materials.

The grinding wheel is relatively flexible, with relief on the surface and diamond coating. It attaches to the seating with Velcro.

See also  What Grease In A Reducer Angle Grinder

At the link there are several sets, including discs with different grits. from 30 to 8000 microns, they differ from each other by color.

The coarser the grit, the faster the sanding process and the rougher the finish. The finer it is, the smoother the surface, up to a “mirror” effect. In the process of woodworking, you need to adhere to the optimal mode of operation: the minimum speed angle grinder. 2200, the maximum. 12000, as well as use special fluids or pastes.

The attachment to the angle grinder for grinding wood (sanding abrasive disc)

Suitable only for woodworking: quick sanding and shaping, especially for convex and concave areas. The head is made of high-carbon steel and has many, solid teeth on its surface.

By following the link you can find both “baglikom”, and flat or inclined plane version, which allows you to pick up the nozzle for a certain geometry of wooden workpieces.

Product diameters. 85, 100, 75 mm (inner hole. 22 and 16 mm).

Angle grinder wood grinder attachment (brush attachment)

The cup is made of metal and the bristles are made of nylon wire with abrasive compound.

The different colors have different grit sizes: grey brush. coarse (80), red. medium (120) and blue. fine.

Brushes are used for polishing (mostly wood) at different stages, removing paint or aging wood, working in hard-to-reach areas.

I hope that the selection was informative and useful, and you have picked up the right nozzle for your angle grinder.

Just below is a link to my Telegram channel, where I promptly posted information about new promotions, coupons and promo codes from Aliexpress, as well as deeply discounted products. Stop by and join in!

New WORKING promo codes for ALL merchandise /CIS: (verified as of 5:30 Moscow time on 14.01) HOLODA100. 100₽ from 999₽. HOLODA150. 150₽ from 1299₽ HOLODA250. 250₽ from 2199₽ HOLODA500. 500₽ from 4599₽ HOLODA800. 800₽ from 7599₽ HOLODA1400. 1400₽ from 12999₽ HOLODA1700. 1700₽ from 15999₽ HOLODA2400. 2400₽ from 20999₽ HOLODA3500. 3500₽ from 30999₽ HOLODA5000. 5000₽ from 45999₽ Old still working promo codes: ZIMASALE100. 100₽ from 800₽ ZIMASALE150. 150₽ from 1000₽ 20MAXI22. 150₽ from 1000₽ MAXI22. 200₽ from 1500₽ PES2021. 200₽ from 1500₽ ZIMASALE300. 300 from 2,000₽ ZIMASALE550. 550₽ from 5000₽ ZIMASALE1000. 1000₽ from 11000₽ ZIMASALE1400. 1400₽ from 15000₽ ZIMASALE1700. 1700₽ from 20000₽ ZIMASALE2500. 2500₽ from 30000₽ ZIMASALE5300. 5300₽ from 60000₽

Promocodes are entered in a special field during checkout and give a discount on the entire basket, as well as on individual items (depending on the amount of the order). Also on the main page of the sale and in the mini-application VK Aliexpress, periodically give out coupons for a discount.

Promo codes for beginners, other countries or relevant in N-n some time after this publication can be found on my Telegram channel (there is a link under this selection).

attachments for woodworking angle grinder on sale from Aliexpress

the angle grinder (angle grinder). a useful tool for a wide range of works, and additional attachments further expand its functionality. And today we will talk about accessories for woodworking.

Beforehand I want to remind you that in addition to its many advantages, the angle grinder carries a great danger if it is not used safely.

Never use it without a safety guard, because the rotation speed is so fast that it can easily cause serious injury. Be sure to protect your eyes, face and if possible wear protective clothing. And also use attachments strictly according to their intended purpose, check them before use, securely fix the workpiece and hold the tool with two hands. Never use fabric gloves, they can become entangled in the workpiece. Do not clamp the angle grinder until the grinding wheel has come to a complete stop and you must always work with great care.

Also inform you that from December 6 to 11 (11:00 pm Moscow time) on Aliexpress a New Year sale, at this time for any goods there is a discount on promo codes (you can find them at the end of the selection).

Angle grinder stand with safety guard

This product allows you to make the process of woodworking comfortable and safe.

The stand is made of tungsten steel about 1,2 mm thick, its dimensions are 13,8×9 cm.

The product is resistant to scratches and corrosion.

Inner diameter of the mount. 40 mm, outer. 110 mm, weight of about 100 gr.

angle grinder can be installed at different angles, the adjustment range. 2-3 cm.

Woodcarving spindle for angle grinder

These are spherical bits with 40mm crowns in two sizes, 14 and 10mm.

Total tool length 10.8 cm. The head is coated with sharp teeth, which, when rotated quickly, allows you to cut smooth cavities in wooden workpieces, creating original spoons, bowls, sculptures and more.

The nozzles are made of steel, they are strong and heavyweight (0,47 Kg).

Circular saw blade for angle grinder

These discs are fast and smooth cutting and are excellent for cutting, routing and deburring wood. Vector edge and tungsten carbide teeth allow for high RPM operation, prevent overheating of discs and minimize kickback when cutting.

Here you can find discs with different diameters: 65 mm (bore diameter 16 mm), 100 mm (n.e 16 mm), 115 mm (n.e 22,23 mm), 125 mm (n.diameter 23mm).

abrasive synthetic discs

It is more profitable to pack! Price per unit 6 units.: 3 870 р. Price per unit. goods: 645 р. 699 р.

Better value in packages! Price per pack of 6 units.: 2 442 р. Price per unit. of goods: 407 р. 429 р.

A bargain by the package! Price per unit 8 units.: 1 288 р. Price per unit. 193737 goods: 161 р. 183 р.

expensive by the package! Price per pack of 6 pcs.: 1 368 р. Price per unit. goods: 228 р. 259 р.

Best in bundle! Price per 6 units.: 1 854 р. Price per unit. goods: 309 р. 350 р.

Bargain by the package! Price per pack of 6 pcs.: 2 946 р. Price per unit. goods: 491 р. 567 р.

expensive by the package! Price per unit 8 units.: 3 488 р. Price per unit. 567 р. 494 р.

Best in bundle! Price per unit of 14 units.: 2 352 р. Price per unit. goods: 168 р. 190 р.

Best by the package! Price for bundle of 8.: 2 856 р. Price per unit. goods: 357 p. 405 р.

It is more favorable in packages! Price per unit 8 units.: 2 344 р. Price per unit. Goods: 293 р. 332 р.

Best in bundle! Price per package of 6 pcs.: 2 046 р. Price per unit. goods: 341 p. 387 р.

expensive by the package! Price for pack of 6.: 1 950 р. Price per unit. goods: 325 rubles. 369 р.

expensive by the package! Price per pack of 6 pcs.: 2 910 р. Price per unit. goods: 485 р. 540 р.

By the package is more favorable! Price for a package of 8 brushes.: 4 152 р. Price per pc. goods: 519 р. 614 р.

It is more profitable in packages! Price per pack of 8 units.: 648 р. Price per unit. goods: 81 p. 93 р.

It is more favorable by the package! Price per bundle of 8.: 5 776 р. Price per unit. goods: 722 р. 819 р.

Best by the package! Price per pack of 14 units.: 8 274 р. Price per unit. goods: 591 р. 703 р.

You accept the terms of Privacy Policy and User Agreement every time you submit your data in any feedback form on the VseInstrumenty website.Ru

Main features of brushes

The base of the brush is a circle with a hole in the center (diameter 22,2 mm). It looks like a cutting disc. Fitted to the angle grinder tooling is also the same. To do this, put the nozzle on the spindle angle grinder, and then tighten it with a lock nut.

Brushes are produced with different diameters (from 115 to 200 mm). The hardness of the bristles depends on the thickness of the wire. You should choose the tool according to these parameters, so as not to damage the appearance of the work surface.

See also  Angor 125 Angle Grinder Adjustable Speed

The fine wire accessory is suitable for workpieces with complicated shapes or soft structures. Thick bristles are best for cleaning weld seams or burrs.

The stiffness of the brush head also depends on the type of material used to make the brush and the shape of the bristles. Each type is designed for a specific application.

When selecting a brush head, you must take into account

Which paint brush head is best for removing paint from walls?

Almost all craftsmen will agree that it is much easier to build something new than to repair the old, because you have to get rid of the old finish, which takes extra time and effort. So, to prepare the surface for painting work, you may need a paint stripper that can be actuated with an angle grinder, a drill, a torch, or simply by hand.

Below we will talk more about these devices, which you can buy in the store or make yourself, as well as, as an additional material, watch the topical video in this article.

Metal brush as an add-on for angle grinder to remove paint

Brushes and brushes

Best by the package! Price per pack of 4 pcs.: 812 р. Price per unit. For: 203 p. 274 р.

Packages are more profitable! Price for 6 pack.: 618 р. Price per unit. items: 103 р. 132 р.

Packages are more profitable! Price for 6pcs.: 510 р. Price per unit. goods: 85 p. 109 р.

by the package is more profitable! Price per unit 6 units.: 438 р. Price per unit. item: 73 p. 84 р.

It is more advantageous by the package! Price for pack of 6 pcs.: 2 532 р. Price per unit. goods: 422 p. 479 р.

Cheaper by the package! Price per pack of 4.: 764 р. Price per unit. item: 191 p. 217 р.

It is more favorable by the package! Price per 6 pack.: 786 р. Price per unit. item: 131 р. 168 р.

expensive by the package! The price for a pack of 4.: 608 р. Price per unit. goods: 152 р. 175 р.

It is more expensive by the pack! Price per pack of 4.: 572 р. Price per unit. 143 r. 165 р.

Better by the package! Price per pack of 4 units.: 1 352 р. Price per unit. goods: 338 p. 389 р.

Price is better in packs! Price per pack of 6 units.: 954 р. Price per unit. 159 rubles. 180 р.

Best in bundles! Price for pack of 4.: 2 940 р. Price per unit. goods: 735 р. 821 р.

It is more favorable by packing! Price for 6 pack.: 636 р. Price per unit. 106 р. 122 р.

Price per unit Price per unit Packaging is cheaper! Price for a pack of 6 units.: 822 р. Price per unit. item: 137 p. 158 р.

expensive by the package! Price for 6 pack.: 1 170 р. Price per unit. goods: 195 p. 221 р.

expensive by the package! Price per pack of 6 units.: 1 464 р. Price per unit. 244 rubles. 277 р.

expensive by the package! Price per pack of 4.: 644 р. Price per unit. goods: 161 р. 187 р.

Best by the package! Price per pack of 6 units.: 804 р. Price per unit. goods: 134 p. 155 р.

Best by pack! Price for a pack of 4.: 356 р. Price per unit. item : 89 p. 104 р.

You accept the terms of the Privacy Policy and User Agreement every time you submit your information in any feedback form on the VseInstrumenty website.ru

Nozzles for angle grinders

It is more favorable by pack! Price per unit 6 units.: 330 р. Price per unit. 5 p. 68 р.

expensive by the package! Price per pack of 6 pcs.: 312 р. Price per unit. goods: 52 p. 65 р.

expensive by the package! Price per pack of 6 units.: 162 р. Price per unit. goods: 27 р. 31 р.

Best in pack! Price per unit 8 units.: 5 576 р. Price per unit. product: 697 p. 797 р.

Bargain by the package! Price for 6 pack.: 426 р. Price per unit. goods: 71 p. 81 р.

Bargain Package! Price per pack of 8.: 5 328 р. Price per unit. 666 р. 829 р.

Best in packages! Price per pack of 6 pcs.: 2 034 р. Price per unit. unit price : 339 r. 384 р.

expensive by the package! Price per pack of 8 units.: 712 р. Price per unit. goods: 89 rubles. 107 р.

It is more favorable by packing! The price for a pack of 8.: 232 р. Price per unit. 29 rubles. 34 р.

Better by Package! Price per pack of 8.: 1 152 р. Price per unit. goods: 144 р. 185 р.

expensive by the package! Price for a pack of 6 pcs.: 348 р. Price per unit. goods: 58 p. 72 р.

expensive by the package! Price per pack of 6 units.: 498 р. Price per unit. goods: 83 р. 108 р.

Best by pack! Price per 6 pack.: 450 р. Price per unit. goods: 75 р. 84 р.

Cheaper by the package! Price for a pack of 6.: 228 р. Price per unit. goods: 38 р. 46 р.

It is more favorable by the package! Price for a pack of 6 pcs.: 168 р. Price per piece. goods: 28 p. 33 р.

Best by pack! Price per pack of 6 pcs.: 852 р. Price per unit. goods: 142 p. 176 р.

Cheaper by the package! Price per pack of 6 units.: 156 р. Price per unit. goods: 26 р. 30 р.

advantageous by the package! Price per 6 pack.: 1 716 р. Price per unit. goods: 286 p. 330 р.

Best by pack! Price per 6 pack.: 252 р. Price per unit. goods: 42 p. 50 р.

It is more profitable by the package! Price for 6 packages.: 174 р. Price per unit. item: 29 р. 33 р.

You accept the terms of the Privacy Policy and User Agreement every time you leave your data in any form of feedback on the site VseInstrumenty.ru

What are the attachments on the angle grinder?

Before you find out which head on the angle grinder is necessary in each specific case, you should familiarize yourself with the rules of their safe use:

  • Check the angle grinder accessory before use for chips and other damage that could endanger the tool.
  • You can not use the attachments on the angle grinder not for its intended purpose, for example, cutting as a grinder. it can collapse in the course of work and injure a person.
  • Do not use the tool at a different rotational speed than permitted.
  • Before you start work, first check that the bit is correctly mounted and that its retention nut is screwed all the way in.
  • Do not use an expired angle grinder accessory.

Cutting nozzle on angle grinder

Before considering the attachments on the angle grinder on wood, it should be mentioned that experts do not recommend cutting wood and wood materials angle grinder, because the tool develops a very high speed of rotation, which is not safe. An experienced person familiar with the intricacies of the work can perform similar manipulations. The nozzle on the angle grinder for wood cutting can be different diameters. from 115 to 230 mm. It is forbidden to use circular saw blades, they are very dangerous. Cutting discs for angle grinder can be:

  • Toothed, or circular. the teeth of such nozzles are made of special alloys, the discs of this type are very common, but they are considered the most dangerous for cutting wood because of the effect of backfire.
  • Chained. on the outer side of such discs there is a saw chain that enables cutting wood; the construction of such discs prevents jamming and backfire effect.
  • Universal. with such nozzles you can cut not only wood, but also metal, the nozzle looks like an ordinary disk with three slots and teeth made of hard alloys.
  • Edge-hardened discs cut wood, metal, plastic and other materials; they have a durable tungsten carbide or diamond coating on the edge of such discs.
See also  Angle Grinder Aeg 125 Adjustable

Angle grinder bits for slotting

Universal chisel-cutters. expensive tool and not needed in the economy all the time, so many people use the attachment chisel-cutting on angle grinder. The discs are diamond plated and should not be changed, as other products may not be able to cope with the tough concrete. Not every tool is suitable for the attachment-splitter, angle grinder must be:

  • The power of at least 1500 watts;
  • with needle or roller bearings;
  • with sufficient shaft length to accommodate an additional disc;
  • With the ability to connect a vacuum cleaner;
  • with a protective cover against debris.

An angle grinder grinder attachment for milling

For milling work with wood, the nozzle on the angle grinder for milling wood is used. This work is hazardous and must be carried out safely. The cutter attachment is necessary for cutting grooves, log houses, and can only be applied to those products that have a special design that excludes jamming. The milling heads are available in a wide range, all made of hard metal and guarantee long life.

Paint remover for angle grinder

When you need to remove paint from a wall or metal, you may need an angle grinder to remove paint. Its hardness and size depend on the workpiece and the material of the surface. To clean metal surfaces, the nozzles are made of wire and look like a cup or disk with a brush. If gentle scraping is necessary, you can take carbide nozzles or a Clean and Strip disk made of nylon threads.

Paint can also be removed from metal with a flap brush, which looks like a disk with a surface made of sandpaper flaps. For the initial rough cleaning take discs with coarse abrasive particles, for the final cleaning you need a fine grain. If you need to remove paint from a concrete wall, you need a cup-shaped nozzle, which can also level walls, remove putty, plaster.

Sander bit for angle grinder

One of the purposes of the angle grinder is sanding, so there are several varieties of attachment on the angle grinder for sanding wood. The initial processing of the surface is carried out by roughing discs or cord brushes made of wire, endbrushes, which are used as files. The final smoothness is given with sandpaper tips of different grades, felt, coarse cloth. Finish the work with a nylon cloth.

The brush head on the angle grinder for polishing

To give the painted surface a presentable appearance, you need a polishing nozzle on an angle grinder with a surface made of felt, felt, sheepskin, foam rubber, cloth. Such a disc should gently act on the surface and eliminate minor scratches and defects. Often with these nozzles use special pastes that help restore and protect the surface. Very often motorists use polishing pads to remove minor scuffs and scratches on the body.

Brushing attachment for angle grinder

Today’s fashionable technology for woodworking. brushing, is to “aged” wood. The nozzle on the angle grinder for this purpose should be chosen depending on the type of wood:

  • Metal. this brush performs the initial processing of wood, for hard wood is used steel wire brush, for soft. from brass or copper pile.
  • Nylon brush. used for aging the surface of wood.
  • Sisal, wool. finish when brushing, the bristles are impregnated with special substances that increase the service life of the wooden product.

The attachment to the angle grinder for sharpening knives

To sharpen household tools with an angle grinder is very convenient. The nozzle for sharpening a kitchen knife is a grinding wheel. After sharpening with an angle grinder it is recommended to work on the edge manually. for the final straightening. Attachment to the angle grinder for sharpening drills. the same grinding wheel, but experts recommend using an additional vice, in which the drill will be clamped, in order to better control the sharpening process.

A brush cutter nozzle on the angle grinder. brush cutter

When asked what are the attachments on the angle grinder, craftsmen answer. almost for all occasions. Remaking with their own hands an old bush cutter, you can get a bush cutter attachment on an angle grinder, which will greatly facilitate the work in the garden. The productivity of such a self-made machine is very high due to the power of the device, and the cost of the resulting tool. insignificant.

Dust extraction nozzle for angle grinder

Work with the tool often has one drawback. a very large amount of fine debris is produced. Cope with this problem helps to remove dust on the angle grinder. The hood under the vacuum cleaner is recommended for concrete sanding, tile cutting, wall grinding, floor scraping. There are a lot of models of dust guards. you can pick up to each modification of the tool. While working with the angle grinder, a vacuum cleaner is connected to the attachment, which successfully collects the bulk of the dust produced.

Rules for changing the wheels on the tool

Due to the fact that the discs for the angle grinder have the status of consumables, sooner or later they will have to be replaced. They are fixed on the spindle of “angle grinder” by means of clamping flange (or nut) with M14 thread. The special wrench that comes with the tool, equipped with a one-way pin, is precisely designed for fastener operations. Below you will find a step-by-step instruction on how to attach the wheel:

  • It is necessary to de-energize the tool (by disconnecting the battery or pulling the plug from the socket);
  • By pressing the button located in the front of the housing, fix the spindle of the angle grinder (the spindle is fixed in the stationary position, after the stopper enters the hole of the disk placed in the gearbox, after pressing the button);
  • Then you need to insert the pins of the wrench in the clamping flange (or more precisely in its holes);
  • Hold the retainer with one hand and with the other to turn the wrench to the left until the nut is moved. Then it can be unscrewed without using a spanner and removed from the shaft.
  • Then the tooling can be replaced by removing the old one (if dust and dirt have accumulated inside the shell, remove the bottom flange and clean dirt from all bearing surfaces with a steel brush);
  • The next step is to put the flange back in place. Fix it properly, all the grooves on the flange and spindle must necessarily coincide;
  • Then place the gasket on top of the (lower) flange. It is not necessary to install it, but it is desirable, because it will help to easily unscrew the clamping nut in the future, when you need to replace the tooling;
  • Fix a new circle by installing it with the marked side (the side with the information sticker) outward;
  • Install the gasket over the abrasive wheel (if the gaskets did not immediately come with the “angle grinder”, you can buy them in a construction store or you can make them yourself from cardboard or thin tin);
  • In the end, it is necessary by hand to screw on the shaft flange. The nut should be tightened until it can no longer be turned without a wrench. Then, while gripping the stopper, the nut should be tightened using a wrench, but no more than 1/4 turn, otherwise the wheel could be deformed.
  • When all the above actions have been carried out properly and in the correct order, the replacement is considered to be a success.

IMPORTANT! The clamping flange must always be unscrewed in the direction opposite to the rotation of the shaft!