DIY Tiller Hex Trumpet
Description of the fixture
the tiller is an indispensable tool in any home garden. For active planting and harvesting, the monoblock is used together with special units, most often mounted, which are able to dig and harrow the ground with any structure, as well as loosen it. It can also be used in weed control.
The hay rake is a productive tool for working with soil in spring. Since hand tools are very small in width, a similar version with a large grip can be attached to the monoblock. It can make your gardening work more efficient.
Everyone knows that even the fastest manual work cannot be compared to the same mechanized one. Despite the best efforts, in bad weather it is incredibly difficult to handle the huge volume of work. And it happens that efforts are simply wasted. After heavy rains, hay harvested can be irreversibly deteriorated. Even after drying such hay, it will have no value and can quickly become moldy. Such animal feed is unsuitable and can only be thrown away.
It is in order that all your work is not in vain that you can make mechanized wide hay harvesting nozzles for the tiller with your own hands. They will help you quickly collect dried grass from vast hay areas. The material used for self-assembly of the rake is most often metal pipes for the water supply.
The diameter of the pipes should be about fifteen centimeters. Making a functional rake for a tiller with your own hands is not difficult. For specimens with a wide hay grip, water pipes of different diameters are excellent.
On sale, as a rule, if you can find a rake, then most often they are very bulky and inconvenient or too expensive. Therefore, the best option for many is to make a homemade rake to the tiller from improvised materials with their own hands. Of the main types of rakes, universal and tedders can be noted.
The universal type of rake is most often used for harvesting hay in a swath. Their grip width is 115-200 cm. These are the most optimal dimensions for this design. The tedders are designed for raking and turning green or dry grass and straw. The working tool of such a rake looks like raking fingers on the rods.
How to do it yourself
If you decide to make a cross rake yourself, you will need the following set:
- welding machine;
- two wheels;
- metal axle;
- profile pipe;
- metal rods;
- rake tubes.
Experienced gardeners recommend choosing a rake model not in one piece, but in a folding version. The cross home-made rake to the tiller, which can be folded in practice, turns out to be more comfortable and mobile during transportation. With a hand-made rake, you can achieve maximum mobility in raking hay. That is why they must be fully mechanized to work. The technological process of manufacturing these devices is quite simple.
In the process of designing them, you need to pay attention to the presence of such components as levers, drawbars, rods, struts, axles for wheels and crossbars for teeth. It is from the tube that all the elements for the rake are made with their own hands, except for the teeth. Ordinary metal rods can serve as them.
As the drawings describe, the pipe sections are assembled into a structural solution. They can be tightly welded into one piece, or you can firmly insert one pipe into another. The traction mechanism will determine the free rotation of the tiller, so the wheels do not need bearings. Having calculated the efficiency of cleaning the haymaking area, you can choose any diameter of the rake grab with your own hands.
There are a lot of ideas for making homemade elements for working units. As well as the required blueprints, they are available. Therefore, the best solution would be to use them and make a multifunctional rake for the tiller yourself, because they will significantly increase the productivity of your work.
Mowing grass and making hay are some of the most important agricultural jobs. To mechanize these processes, a wheeled rake for a tiller is used. Their use significantly increases the productivity of hay harvesting. Haymakers are also used for collecting hay, wrapping it, tedding and mowing, and wheeled ones can be used on all areas of land with flat terrain.
How to make a functional rake for a tiller with your own hands
Homemade loader from Tiller
A loader from a tiller is a necessary thing in the household. Buying a ready-made forklift is very expensive, it is necessary only if there is constant work with the transportation of goods, clearing the area, etc. Mostly forklifts in the household are used to remove snow and transport various goods, so it will be cheaper and more rational to make a forklift with your own hands.
Craftsmen are constantly coming up with new versions of this equipment, so there are many modifications, among which there is a suitable option for everyone. A loader can be assembled from special parts, or you can use what many have in garages. Parts from old cars and motorcycles are suitable.
the tiller must be equipped with a powerful engine. The heavier the loads, the more powerful the equipment should be. Even tillers with 15 hp motors lift no more than 250 kg. Counterweight required.
You can take the drawings of the fracture mini-tractor as a basis. The frame is made of a channel, the fracture unit is a fist from a VAZ, a steering column and shortened axles from any car, a P40 hydraulic valve, a bucket can be made independently, or you can use a ready-made.
What homemade products for a tiller can be done with your own hands: amazing inventions and adaptations
Homemade products for the tiller are invented and made by almost all owners of this technique. The purpose of these actions is to expand the functionality of the unit with minimal financial investment. In the basic configuration, the cultivator has extremely limited capabilities. Installing various options on it can turn a small car into a full-fledged mini-tractor. Often, home-made devices are in no way inferior to factory-made analogues. In order to improve the tiller with your own hands, a set of tools that are available in every workshop of a country house or summer cottage is quite enough. The materials you need can be found in a landfill, in a barn, or at a scrap metal collection point.
What can be done from a tiller
The use of specialized equipment allows solving a wide range of tasks. However, some owners want even more features from the tiller.
Homemade products are constantly inventing something and showing what can be done from a tiller. Upgraded adapters turn into mini tractors, you can also create a snowmobile, swamp vehicle, ATV. Replacing the wheels with caterpillar tracks, you get a motorized towing vehicle.
These and many other amazing homemade products, ways to create them, drawings, etc., are available at the link: https://specmahina.ru/motoblok/samodelki-iz-motobloka.html
The dump is a necessary device that is needed at any time of the year. The front knife is used to clean snow, plan the area, dig holes and move bulk materials. Such equipment for the Neva tiller is of good quality, but not everyone can afford it. Do-it-yourself dumps require minimal financial investment. By installing the front knife on the Neva tiller, you can solve many household tasks. With levers and hydraulics, a homemade shovel can also be used as a loader.
To make a blade, you will need the following tools:
- welding machine;
- electric drill;
- Angle Grinder;
- acrylic paint;
- barrel 200 l;
- reinforced rubber;
- sheet steel 5 mm;
- profile pipe 40×20 mm;
- paint and brush;
- bolts and ties.
Before making a dump, it is necessary to calculate the correspondence of the tiller power to the bucket size. Excessive loading leads to rapid wear of parts and mechanisms of the unit. Depending on the weight and power of the machine, shovels are made 60-100 cm wide and 20-30 cm high.
DIY snow removal homemade products for the tiller are made in the following sequence:
- Marking the barrel, sawing it into 3 identical parts vertically. Cutting 1 piece into 5 cm wide strips.
- Fastening 2 blanks with bitumen and rivets. Aligning the edges of the product. Bucket reinforcement with transverse struts.
- Fastening of sheet metal strips along the edges of the shovel. This is done using welding or bolts.
- Drilling bolt holes. Attaching a rubber strip to the bottom of the bucket.
- Shovel hitch making. It is done by attaching a piece of pipe and a semicircle of sheet metal to the blade by welding. Holes are made on the sector to adjust the angle of attack. A self-made snow plow is attached to the tiller bracket with an adapter from a profile pipe.
The finished product needs to be cleaned and painted. All bolted connections must be lubricated regularly to prevent corrosion.
Making a field sprayer for a tiller
A homemade sprayer for a tiller is necessary in cases where the area of cultivated crops exceeds 20 acres. It is very difficult to do such work manually, it can take a whole day. Mechanizing this process will save a lot of time and effort.
homemade tiller extension
To make a sprayer you will need:
- welding machine;
- Angle Grinder;
- electric drill;
- soldering iron for polypropylene pipes;
- shaped or round water pipes;
- plastic or steel barrel with a capacity of 80-100 liters;
- wide pneumatic wheels;
- plastic pipes;
- rubber hose;
- nozzles or nipples from wheel tubes.
The assembly of a homemade sprayer is carried out in the following sequence:
- Frame manufacturing. Its dimensions are adjusted to the size of the container. The chassis is attached to the frame. For good cross-country ability, at least 4 wheels are required. In the absence of wheels, wide skids are made of aluminum.
- The container is installed and fixed on the frame. For this, spacers and ties are used. Holes are made in the tank for the supply of high pressure hoses. The filler neck is sealed.
- A bracket for the pump is being manufactured. A model is selected that works from a power take-off shaft (belt drive) or from electricity (tiller generator).
- The watering system is being assembled. A durable holder is made of steel profiles. Plastic pipes are attached to it with clamps or plastic ties. Overpressure relief valve and nozzles are being installed.
- All parts are connected together, the quality of the fasteners is checked, the tightness of the joints. The tank is filled with water, the unit is tested in various modes, the final adjustment and adjustment is carried out.
A self-made sprayer will fully justify the investment in the first season. Thanks to this device, spraying and watering of the garden will be carried out quickly and efficiently.
Homemade variator for tiller
The variator allows you to smoothly change the speed without sudden jerks, saves fuel by transmitting torque. Tiller motors are often used as a generator to provide electricity to living quarters, local areas, and also to operate lathes.
A homemade variator can be made in different ways, the easiest is to use a ready-made variator, which can be altered for a specific tiller. Another way is to use finished parts from gearboxes and other mechanisms. Also, parts can be made independently, subject to the availability of special equipment (hot stamping is required for discs). Diagrams and videos for creating parts and assembling pulleys are easy to find on the Internet.
You can make a variator from wheel hubs, the main thing is to make a hole diameter suitable for the crankshaft. In addition to pulleys for the variator, a belt is required, which is one of the most important parts. The belt must be strong and all parts of the variator must be regularly lubricated.
Reducing unit noise
Even the most modern and expensive motor cultivators make a lot of noise during operation, especially at high speeds. This factor greatly tires the operator and can serve as a reason for the deterioration of relations with neighbors. A homemade muffler will help solve the problem. This is a task that is within the reach of any craftsman with initial skills in handling iron.
In order to make a muffler for a tiller with your own hands, you will need the following tools and materials:
- welding machine;
- Angle Grinder;
- electric drill;
- aluminum clamp;
- stainless steel 2 mm thick;
- metal shavings.
Having collected everything you need, you can begin to improve the exhaust system.
This is done in the following sequence:
- Make 2 tubes of oval section from stainless steel. The diameter of the pipes should differ by 1-1.5 cm. Fasten the pipe joints with a welding machine.
- In a pipe with a smaller diameter, make the maximum number of holes with a diameter of 8 mm. Wrap it with metal shavings. Coil up the shavings with steel wire.
- Insert the smaller pipe into the larger one. Fix them in position with steel bars and welding.
- Attach the muffler to the exhaust pipe and secure with a hose clamp.
The noise level after such an improvement will decrease several times. The service life of a homemade muffler will be at least 5 years. So, being content with little, you can significantly improve the conditions for agricultural and other work using a tiller.
Homemade products to Tiller Neva
Attached and trailed equipment significantly expands the functionality of the trailers. Some equipment is included, such as cutters, but the rest must be purchased. If you purchase the entire arsenal of additional devices for the Tiller Neva, then it will be too expensive, so homemade products and inventions from improvised means are so in demand.
What adaptations for a tiller can be made at home?
- Adapters, carts
There are detailed articles and videos on the Internet on how to make these devices. Also an important improvement for the tiller is the muffler. It comes out of the box as part of the exhaust system, but does not always cope with noise suppression. You can make a quiet muffler according to this scheme:
Where to begin?
First, make drawings of the future tractor. You can find the finished scheme in the public domain on the Internet. Then make a frame from tubes and metal fasteners.
It is desirable that it has a moving part so that the trailer can turn. After that, make a body from a sheet of metal.
The sides should not be too high. about 25 cm. Now you can proceed with the final assembly: attach the seat, attachments. Test drive time. if everything goes well, then feel free to get to work.
Why make a tiller with your own hands?
So, what are the advantages of a custom-made tiller? First, it will provide tremendous assistance in processing (in particular, plowing) the land and will reduce time and labor costs.
In addition, if you can make an all-terrain vehicle out of it, it will help you move long distances and into the most difficult-to-reach places. In addition, it consumes quite little fuel (5 liters is enough for half a day of intensive work).
You can use the unit for transporting goods up to 300 kg (for this you will need to attach a trailer for a tiller), harrowing the soil, harvesting, removing snow and debris, distributing fertilizers over the site.
With due diligence, a home-made device in its characteristics will hardly differ from an expensive imported one.
Pick up parts and assemblies. they should be close at hand and in good condition. Size them correctly. the wheels must be correctly matched to the engine and suspension. Otherwise, a good product will not work.
However, like any other thing, tillers can break. Especially if they are of poor quality. Below we will tell you about the repair of the tiller.
So, all problems can be divided into several categories:
Fuel is not being supplied correctly. To solve the problem, check the ignition and clean the gas tank, as well as the entire fuel supply system. Try starting the tiller again. If this does not help, then you can flush the fuel cock and tank with clean gasoline, and then blow out the connecting hose located near the carburetor.
Breakage of the carburetor. This can also be signaled by a problem with the fuel supply. In order to repair a part, check the condition of the bracket and the float. Adjust the design with a screwdriver in case something is wrong. Also check that the valves are working.
Gearbox problems. Continuous noise can become an indicator. This indicates that the oil level is too low. If simply adding oil from the noise did not save you, then you should flush the entire system and change the brand of the oil to be poured.
In addition, check how firmly the transmission elements are holding. If the fastening is not tight enough, tighten the bolts. Or if you find any defects, be sure to replace the broken parts.
Another breakdown option may be a problem with the engine. the ignition pedal fails (eliminated by removing carbon deposits), or they can be caused by breakdowns in the spark plugs or the electrical network. Unfortunately, nothing can be fixed here. You just have to replace the part.
What you need to know?
So, before starting work, try to study at least a little the structure of the internal combustion engine.
We recommend that you familiarize yourself with several factory models, their internal structure. This will help you better understand the manufacturing process and reduce the risk of injury.
Get involved in strengthening the engine. It must be attached to the frame and rigidly fixed. Use the option that is the best value for money, but not too expensive. For some options, even Chinese is suitable.
DIY tiller. how to make a simple and reliable homemade tiller for the household (105 photos)
Many have country cottages with land plots where all kinds of vegetables and fruits are often grown. And in order to facilitate the hard work of the gardener, many decide to purchase a tiller.
However, it can be quite expensive to purchase. Therefore, in order to reduce costs, many decide to make a homemade tiller with their own hands. Yes, this seems like a rather difficult task, but in fact, a lot of people can cope with it.
- Why make a tiller with your own hands?
- Manufacturing process
- What you need to know?
- Basis of construction
- How to make a mini tractor?
- Where to begin?
- Possible problems
- Do-it-yourself photo of a tiller
So, when the drawing is ready, you can start directly to work. First, check if you have all the necessary tools: an angle grinder (preferably with cutting discs), an electric drill and a set of drills of various sizes and shapes, a welding machine (always with a mask), locksmith tools.
DIY hexagon pipe for a tiller
Drawings of key adapter assemblies
Coupling mechanism. It looks like a welded structure inserted into the main frame and bolted to it. Consists of two pieces of square pipe welded onto each other and a piece of regular “water” pipe with a gauge of 1.1.5 inches.
In the pipe, not fully inserted, clamped by a bolt, a stem with a welded on homemade tee. The stem is lubricated with grease and allows the tee to rotate along the axis, to ensure the rolling effect when moving on uneven ground.
Wheel attachment assembly. The structure consists of two perpendicularly welded pipe sections. The horizontal section is inserted into the fixing pipe and bolted together. On the vertical part, an axle with a wheel is fixed (on bearings).
Other nodes of the adapter are not so important, and we will not consider them.
DIY tiller adapter drawings and dimensions
Below are the drawings and dimensions, as well as the materials necessary for the manufacture of an adapter for a tiller of complex design.
What you need when making an adapter
Below is a kinetic diagram to help balance the structure and avoid additional stress. The drawing below shows a diagram of a mini tractor made from Tiller Neva.
The engine of the power unit (2), which drives the front wheels (1), transmits the torque through the chain (3) to the reverse gear (4), and from it, through the cardan transmission (5), to the rear axle (6), driving rotating rear drive wheels (7).
Professionally about smut
Robot on dilyantsi
We make an adapter for the tiller with our own hands
At the moment, there are several types of adapter, as a rule, their designs are similar, and are, attached to the rear of the tiller, adapt with a comfortable seat.
The adapter is made of a square metal profile, with a length of 160 to 180 cm. Across this profile, another one, 50-60 cm in size, is welded, depending on which track you need, (wheel stands are attached to it). The height of the struts to the wheel axle from the top to the adapter wheel axle can be from 25 to 40 cm, depending on the design.
Further, braces are welded to the main metal profile and wheel hubs, they also serve as stiffeners. Their length depends on the angle of inclination relative to the entire structure and other parameters. Then, the frame structure is calculated and welded in the same way, to which the attachment will be attached. Side rails of this design are bolted to the wheel struts.
After that, a control lever is welded to the main frame, which has three knees, sizes 35, 55, 20 cm.To increase the applied force, another lever is attached to the lever, but already with dimensions of 80 cm.
Adapter seat, mounted on a support welded to the central metal profile. As you can see, making an adapter to the tiller with your own hands is not so difficult.