Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
DIAMOND CUT OFF WHEEL I JIJY M J GLASS TECHNICIAN I DIAMOND TOOLS Cutting glass with a diamond wheel angle grinder. How to cut with an angle grinder Tempered glass is considered one of the most common materials. Hardening technology is used to increase its strength. After such a procedure, the degree of machinability of the material is significantly reduced. […]
Read more
How to cut with the glass cutter: secrets of the skill There is such a wide assortment of this tool on the market that consumers are confused by their choice, perplexed as to which option is better to buy. To make the right decision, you should not only know the basic rules of how to cut with a glass cutter, […]
Read more
Cutting tempered glass at home A lot depends on this step, and the preparation process itself depends on what kind of glass you decide to use for cutting. New glass, bought specifically for the purpose, it is enough to simply wipe, and, for this purpose, it is better to use an old newspaper (this will avoid streaks and settling of […]
Read more
How to drill a hole in the glass at home: take apart all options When it is necessary to create an even and neat hole in a glass surface, it is not necessary to turn to experienced and qualified specialists, whose services are quite expensive. Such a procedure can be performed with your own hands in the conditions of the […]
Read more
Flexible glass: How to unpack, lay down and take care of it correctly How to install flexible glass correctly so as not to damage it in the process? And how to take care of it afterwards? Read about it in the article! Unpacking, stacking, and proper trimming of the glass Do not use a knife or scissors to open flexible […]
Read more
Three methods for cutting glass at home Glass cutting thread It is quite possible to cut glass without a cutter, using string. First, make sure you have a large bucket of water handy. It must be big enough to hold the glass you need to cut it. First make sure that the glass is clean and dry. Take a good […]
Read more
What is a soft glass tablecloth Tablecloths or oilcloths have always been used to protect the table cover. However, experience has shown that they can be quite impractical. However, progress does not stand still, and for modern housewives there is an alternative: a transparent or translucent tablecloth “soft glass”. It’s not only very practical, but also versatile and goes well […]
Read more
In order to drill holes in glass you will need the following: Drills designed for drilling ceramic or metal materials; A low-speed drill or electric screwdriver; Turpentine; Plasticine; Alcohol. The sheet should be placed on a completely flat surface. There are nuances: the edges should not be loose, and it should not wobble. On the drill or electric screwdriver should […]
Read more
How to properly cut glass Glass is washed, dried and degreased, put on a perfectly flat table, under a cloth or linoleum. The fabric under the glass should be thick and dense. Perfectly clean glass will eliminate the possibility of the cutting tool going sideways. Use a variety of templates or a self-made blank with an edge of the desired […]
Read more
Preparing Never neglect to prepare for the glass cutting process. This operation is not possible without prior preparation. It is necessary to wipe the surface with a moistened rag to remove all unnecessary inclusions. After the glass is dry, dry it with a dry cloth. Many experts recommend using old paper rather than rags. It does not leave fibers on […]
Read more