How to wind the line on the reel of a lawn mower
Things to consider when choosing a fishing line
Rating of the best models of gasoline grass trimmer. A review of manufacturers and models, as well as useful tips from experts reviewed in this review, will help in a difficult choice among many device models.
auto feed grass trimmer: how to wind the line into the removable spool
In some models of trimmers, a reel is installed, in which the line is refueled automatically. It is enough for the owner to fix the ends in the head, after turning on the equipment, the mechanism will perform all the winding manipulations on its own.
You should know this! The strengths of the automatic grass trimmer head include the ease of winding. The disadvantages of such equipment are frequent breakdowns of a complex mechanism and high cost.
What grass trimmers are and how they are used
The grass trimmer is useful for mowing small or difficult areas, such as near hedges, between beds and along paths. Today, manufacturers produce a wide variety of gasoline, electric and battery models, which can be selected for any owner’s request.
A line is used as the cutting element of the grass trimmer. In the process of work, sooner or later its length will end, and then the owner will have a question of how to properly replace and fix the thread tucked into a removable spool.
How to quickly and easily remove the coil with your own hands
Remove the head before replacing the old line with a new one in the detachable spool of the grass trimmer.
The process is completely simple, even beginners can do the job:
- Remove the upper fixing cover.
- Take out the removable spool.
- Get out the spring, if any.
- Unscrew the bolt with a screwdriver.
- Remove the housing from the shaft.
How to wind the line correctly: replacement features depending on the type of removable grass trimmer coil
To figure out how to thread the line into the removable trimmer head, the following recommendations and video instructions will help.
How to wind the line around the detachable reel of the twin-barb grass trimmer
You can watch the video before work, and also take into account the following recommendations.
- If there is only one track, both threads are wound parallel.
- If there are two tracks, each section is wound in a separate groove.
- Wind the threads in the opposite direction to the rotation of the head.
- The length of the free ends should not exceed fifteen centimeters.
- Thread the ends into the outlet holes.
- Assemble the head and check the function of the grass trimmer.
Advice! If the loose antennae are of different lengths, do not worry. During operation, excess ends will be cut off.
Before putting the line on the grass trimmer, you need to pay attention to the section of the cord:
How to Spool a Spinning Reel | TIPS to Help Beginners!
- round threads are the most common option. They cut the grass perfectly even in difficult areas;
- Spiral line is suitable for thin grass. It is not very durable and is not suitable for old thickets;
- a cord with notches and sharp edges is chosen for mowing weeds;
- fishing line with a variety of geometric sections will help mow the lawn more evenly, however, the strength of the consumable is low.
Important! Most wear-resistant consumable is 2-piece round, reinforced internally.
The owner of the brushcutter should know that it is strictly forbidden to use metal wire, fishing thread and various strings.
How to choose the right line?
Nylon lines are suitable for both electric and gas powered trimmers. This consumable can be used for both hand tools and a wheeled lawnmower. It is important to choose the right line, as this directly affects both the result of the work and the service life of the unit. Of course, it is very easy to get confused in the offered assortment of lines, especially for beginners. However, there is a lot of advice from experts and those who have already tried various options.
For an electric grass trimmer less than 500 watts, a thin line with a diameter of 1 to 1.6 mm will work. She will perfectly mow lawns with low grass. If the power of the tool is in the range from 0.5 to 1 kW, then it is better to give preference to a line with a diameter of 2 mm or a little more.
This will be enough to cut thin grass or overgrown weeds, but not too thick.
For petrol trimmers, as well as brushcutters, you must not take line less than 3 mm. This thickness will allow you to easily cope with any weeds, dry stems, dense grass. Diameter over 4 mm is only suitable for high power brushcutters. It turns out that thick line is necessary for powerful technique. It is not recommended for use with low power trimmers, otherwise it will not work well, constantly winding around the reel and creating additional load on the engine.
Typically, a standard package contains up to 15 meters of line. However, to replace the string on a reel, a length of about 7 meters is sufficient. It also happens that the fishing line is produced in bays of 250-500 meters. When choosing a string, it is imperative to specify the date when it was produced. Nylon that is too old can dry out and become too brittle. If this happens, then you can soak the fishing line for a couple of hours in water, but it will not be completely the same.
When choosing, an important parameter is the section of the string, which can be of several types.
The round section is versatile. It is used for mowing grass of medium thickness and density. May make excessive noise during operation, but is not used too quickly.
A square or polygonal cross section is more efficient than a round one. Sharp corners cut plant stems faster and with better quality.
Ribbed, twisted and star-shaped sections are the most effective. Such a fishing line manages to mow the grass very quickly. And its main disadvantage is its rapid wear.
The grass trimmer line is made of nylon, which is durable, lightweight, low cost and durable. To make the cost of the material even cheaper, polyethylene is added to it, but then the line overheats faster. Thick strings have a graphite or steel rod. Sometimes they are reinforced, which increases strength and service life.
It is worth noting that for two-piece strings are higher than for standard nylon strings.
How to reel?
Knowing how the reel is disassembled can speed up the line change process. It all depends on what design the coil has and how many antennae. Threading into a spool that has only one working mustache is quite easy, especially if you stick to a consistent plan.
Depending on the parameters of the reel and the length of the line set initially, it is recommended to choose a string from 2 to 5 meters.
First you need to remove the bobbin from the tool, and then open it.
One of the ends of the line must be installed in the hole inside the bobbin.
Next, the string should be wound onto the drum. And this is done in the opposite direction from the normal rotation of the spool. Usually on the trimmers on the inside of the bobbin there is an arrow that shows in which direction to wind.
Part of the fishing line must be pulled out and secured in a special groove located on the inside of the reel. Its purpose is to hold the winding while bringing the bobbin into working condition.
How to Replace your line by winding it on the EGO Power 15″ String Trimmer
The end of the string must be passed through the hole located on the outer part of the bobbin.
At the last stage, you need to collect the parts of the bobbin and put it on the mower bar.
The installation of the line on a reel with two mustaches occurs in a slightly different way. First, you need to determine how many grooves go along the inside of the reel, on which the line is put on. There are options with one groove, and then both mustaches must be wound together. There are also models with two grooves, when each of the mustache goes separately.
For all double-whisker reels, a 2 to 3 meter string is recommended.
Lawn mower fishing line: how to choose and wind?
With the arrival of spring, summer cottages are becoming the main residence of many of our compatriots. However, with the arrival of warm days, there is such a problem as fast-growing grass. It is inconvenient to constantly mow it with a hand scythe, and not all types of grass lend themselves to this old working tool. It is much more convenient to use modern lawn mowers for these purposes. Particularly popular among them are devices with a fishing line, which is easy to change if necessary.
Device in the mower
In the trimmer, the element on which the string is pulled is very simple. It is called the “coil”. Usually it consists of an upper and a lower part (grooves), between which there is a partition with a recess. It is on these grooves that the fishing line should be wound. However, before it is pulled through the recess.
Before removing the coil, unscrew the special button located directly on the mower body. Remove the reel from the mower before changing the line.
It is not difficult to do this, but there are some peculiarities depending on the configuration of the grass trimmer and the coil itself.
In small e-mowers, the motor and reel are at the bottom, and buttons are located on the sides of the reel. If you press them, you get the upper groove of the reel and the part where you need to wind the fishing line.
In bent-arm mowers that do not have a knife, the reels have special two-horned nuts. In such tools, you must hold the bobbin so that it does not move, and at the same time turn the nut clockwise. It is she who holds the entire reel, which is then easy to remove.
Straight arm mowers that can be fitted with a blade have a hole just below the reel. To remove the coil, a screwdriver is inserted into this hole, while the bobbin is fixed. After that, you need to turn the coil clockwise and remove it from the unit.
Sometimes there may be latches on the coil in the form of latches. They must be pressed to separate the parts of the coil. It is also possible that the top and bottom of the bobbin are connected by a thread. In this case, it is enough to grasp the top and bottom with your hands, and then twist in different directions until they unscrew.
In single flute model
The line must be pulled into the hole, and its mustache must be folded together and aligned.
Then winding is performed in the opposite direction to the rotation of the bobbin on the mower. Often there is an arrow inside the spool indicating how to put the line on correctly.
The ends of the string are fixed in special grooves or simply temporarily held by hands and pulled into the hole located on the outside of the bobbin.
After that, the spool is closed and attached to the rod, after which the mower is ready to work.
In the version with two grooves
The line is first folded in half to determine where the middle of the fold is.
Further, the loop formed at the bend is threaded into the groove, which is formed between the two grooves.
After that, you can wind both bars of the fishing line in a separate groove.
You can fix the mustache and assemble the coil completely in the same way as described above.
Opening a reel for the first time and winding a new line is not always easy. Over time, this procedure becomes almost automatic and will not take much time. Some reels have an automatic system that spins the line by itself. As a result, it remains only to correctly set the end of the line, and you’re done. In such models, the string must be put in the hole that is on the outside of the body. Next, the bobbin is assembled, and when the winding rotates, the fishing line is put on it.
The convenience of such reels is that it is impossible to wind up incorrectly, since the line will always turn only in the right direction.
Following safety precautions will allow you to quickly and safely insert new line into the spool on the mower. It is imperative that before the replacement begins and the coil is removed, the device must be turned off, especially for electric lawn mowers. It is important to constantly remind yourself to press the special lock button. On each mower, it can be located in different places, but this must be indicated in the instruction manual.
Remember to adjust the cutting element. Otherwise, the work will be unstable and of poor quality. Most often, there is a button on the unit itself that allows you to configure this. If nothing happens when you press it or the string looses its tension, then you need to hold down the button and forcefully pull the line out of the reel.
Winding the line is a very demanding process. It is important to follow all the steps correctly in order to tighten the line well. Materials other than special nylon strings should not be used. It is worth remembering that you cannot put a metal wire, a rod or an iron cable instead of a fishing line. This is dangerous, as the rig can very easily cut through the shoes even of coarse material and injure the wearer. Before putting on a new line, it is important to carefully read the operating instructions for the device, since some models of lawn mowers may have their own structural features, which are important to take into account when replacing.