Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
Power units MeMZ-966V, 966G (27, 28 hp) A long cylinder without bore, pistons of the nominal size, mainly of group B, should be installed.The difference in the mass of the heaviest and lightest pistons for one engine should not exceed 3 g. It is recommended to assemble the piston with the connecting rod in the following sequence: insert the retaining […]
Read more
Varieties of batteries In modern models of household bathroom scales, there is usually a display on which all operating information is displayed. Some models are supplemented with options that will help you start leading a healthy lifestyle and get rid of extra pounds. In household floor scales, as a rule, three types of batteries are installed: Foundry CR 2032/2430. They […]
Read more
Replacement instructions. how to insert the line It should be noted that the reels in mowers can be different: for functioning with one antenna; for functioning with two antennae; the line must be threaded through the through hole, which is located inside the element. And do not confuse this part with an extension cord for a lawn mower on a […]
Read more
Chainsaw starter: device, damage and DIY repair In the design of the chainsaw, the starter is responsible for the correct starting of the engine of the tool. Over time, owners of chainsaws are faced with the need to repair this important unit. And, the sooner it is possible to eliminate the malfunction, the less other important parts and mechanisms of […]
Read more
Thick line It is stored at the top of the trimmer body. Trimming the line into the trimmer. I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space “How to fill the line in the trimmer.” Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is […]
Read more
How to insert a drill? A seemingly simple question, which, however, can present some difficulties for inexperienced users who first hold a puncher in their hands. There are two ways to install. One of them is simple. you need to immerse the drill shank into the chuck until it clicks. After that, it will not fall out. The second method […]
Read more
The sequence of removing the drill from the hammer drill To insert a new bit into the tool, you need to get out the worn one. You can do this by following the step-by-step guide: See which cartridge is installed in the equipment. If the drill, equipped with a double-sleeve quick-clamping element is fixed, the unit is switched to reverse […]
Read more
How to use a screwdriver? It often happens that you cannot do without a screwdriver. The screwdriver is an indispensable assistant in the manufacture of a false ceiling, installation of drywall. Repair work is complicated if you do not have a screwdriver at hand with which you can easily tighten screws and fasteners. In the household sphere, it is in […]
Read more
How to correctly insert and remove a drill into a hammer drill, screwdriver and drill The popularity of the question of how to insert a drill into a hammer drill or an electric drill can be explained quite simply: such devices are actively used both in industrial and domestic conditions. Cartridges are different, as well as nozzles fixed in them […]
Read more
How to insert a drill into a hammer drill and how to remove it? Varieties of drill bits. How to insert the drill into the hammer drill and how to pull it out? How to fix the drill correctly? How to get the drill out of the hammer drill if it is jammed? And how to remove the drill if […]
Read more